From: Will Deacon <will.deacon@arm.com>
To: Daniel Axtens <dja@axtens.net>
Cc: catalin.marinas@arm.com, gabriele.paoloni@huawei.com,
airlied@linux.ie, linux-pci@vger.kernel.org,
z.liuxinliang@hisilicon.com, bhelgaas@google.com,
alex.williamson@redhat.com, benh@kernel.crashing.org,
zourongrong@gmail.com, daniel.vetter@intel.com,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 4/4] arm64: allow non-legacy VGA devices to be default
Date: Wed, 19 Jul 2017 09:01:50 +0100 [thread overview]
Message-ID: <20170719080150.GB13642@arm.com> (raw)
In-Reply-To: <20170719021516.24718-5-dja@axtens.net>
On Wed, Jul 19, 2017 at 12:15:16PM +1000, Daniel Axtens wrote:
> The VGA arbiter only marks a device as default if it can decode
> legacy I/O and memory ranges. This is often not the case on arm64,
> which doesn't use the legacy ranges.
>
> Enable the VGA arbiter to mark the first enabled VGA card as
> default.
>
> Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Will Deacon <will.deacon@arm.com>
Will
> ---
>
> Tested on a D05 using the hibmc card.
> ---
> arch/arm64/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index dfd908630631..cefcbd442e4f 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -28,6 +28,7 @@ config ARM64
> select ARCH_SUPPORTS_NUMA_BALANCING
> select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
> select ARCH_WANT_FRAME_POINTERS
> + select ARCH_WANT_VGA_ARB_FALLBACK
> select ARCH_HAS_UBSAN_SANITIZE_ALL
> select ARM_AMBA
> select ARM_ARCH_TIMER
> --
> 2.11.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Will Deacon <will.deacon@arm.com>
To: Daniel Axtens <dja@axtens.net>
Cc: linux-pci@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, benh@kernel.crashing.org,
z.liuxinliang@hisilicon.com, zourongrong@gmail.com,
catalin.marinas@arm.com, gabriele.paoloni@huawei.com,
bhelgaas@google.com, airlied@linux.ie, daniel.vetter@intel.com,
alex.williamson@redhat.com
Subject: Re: [PATCH v2 4/4] arm64: allow non-legacy VGA devices to be default
Date: Wed, 19 Jul 2017 09:01:50 +0100 [thread overview]
Message-ID: <20170719080150.GB13642@arm.com> (raw)
In-Reply-To: <20170719021516.24718-5-dja@axtens.net>
On Wed, Jul 19, 2017 at 12:15:16PM +1000, Daniel Axtens wrote:
> The VGA arbiter only marks a device as default if it can decode
> legacy I/O and memory ranges. This is often not the case on arm64,
> which doesn't use the legacy ranges.
>
> Enable the VGA arbiter to mark the first enabled VGA card as
> default.
>
> Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Will Deacon <will.deacon@arm.com>
Will
> ---
>
> Tested on a D05 using the hibmc card.
> ---
> arch/arm64/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index dfd908630631..cefcbd442e4f 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -28,6 +28,7 @@ config ARM64
> select ARCH_SUPPORTS_NUMA_BALANCING
> select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
> select ARCH_WANT_FRAME_POINTERS
> + select ARCH_WANT_VGA_ARB_FALLBACK
> select ARCH_HAS_UBSAN_SANITIZE_ALL
> select ARM_AMBA
> select ARM_ARCH_TIMER
> --
> 2.11.0
>
WARNING: multiple messages have this Message-ID (diff)
From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/4] arm64: allow non-legacy VGA devices to be default
Date: Wed, 19 Jul 2017 09:01:50 +0100 [thread overview]
Message-ID: <20170719080150.GB13642@arm.com> (raw)
In-Reply-To: <20170719021516.24718-5-dja@axtens.net>
On Wed, Jul 19, 2017 at 12:15:16PM +1000, Daniel Axtens wrote:
> The VGA arbiter only marks a device as default if it can decode
> legacy I/O and memory ranges. This is often not the case on arm64,
> which doesn't use the legacy ranges.
>
> Enable the VGA arbiter to mark the first enabled VGA card as
> default.
>
> Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Will Deacon <will.deacon@arm.com>
Will
> ---
>
> Tested on a D05 using the hibmc card.
> ---
> arch/arm64/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index dfd908630631..cefcbd442e4f 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -28,6 +28,7 @@ config ARM64
> select ARCH_SUPPORTS_NUMA_BALANCING
> select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
> select ARCH_WANT_FRAME_POINTERS
> + select ARCH_WANT_VGA_ARB_FALLBACK
> select ARCH_HAS_UBSAN_SANITIZE_ALL
> select ARM_AMBA
> select ARM_ARCH_TIMER
> --
> 2.11.0
>
next prev parent reply other threads:[~2017-07-19 8:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-19 2:15 [PATCH v2 0/4] Allow non-legacy cards to be vgaarb default Daniel Axtens
2017-07-19 2:15 ` Daniel Axtens
2017-07-19 2:15 ` Daniel Axtens
2017-07-19 2:15 ` [PATCH v2 1/4] powerpc: simplify and fix VGA default device behaviour Daniel Axtens
2017-07-19 2:15 ` Daniel Axtens
2017-07-19 2:15 ` Daniel Axtens
2017-07-19 2:15 ` [PATCH v2 2/4] vgaarb: allow non-legacy cards to be marked as default Daniel Axtens
2017-07-19 2:15 ` Daniel Axtens
2017-07-19 2:15 ` [PATCH v2 3/4] powerpc: replace vga_fixup() with generic code Daniel Axtens
2017-07-19 2:15 ` Daniel Axtens
2017-07-19 2:15 ` [PATCH v2 4/4] arm64: allow non-legacy VGA devices to be default Daniel Axtens
2017-07-19 2:15 ` Daniel Axtens
2017-07-19 8:01 ` Will Deacon [this message]
2017-07-19 8:01 ` Will Deacon
2017-07-19 8:01 ` Will Deacon
2017-07-19 8:19 ` [PATCH v2 0/4] Allow non-legacy cards to be vgaarb default Gabriele Paoloni
2017-07-19 8:19 ` Gabriele Paoloni
2017-07-19 8:19 ` Gabriele Paoloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170719080150.GB13642@arm.com \
--to=will.deacon@arm.com \
--cc=airlied@linux.ie \
--cc=alex.williamson@redhat.com \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=daniel.vetter@intel.com \
--cc=dja@axtens.net \
--cc=gabriele.paoloni@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=z.liuxinliang@hisilicon.com \
--cc=zourongrong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.