All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 09/20] package/skeleton: drop dependency on host-mkpasswd
Date: Sun, 23 Jul 2017 00:32:59 +0200	[thread overview]
Message-ID: <20170722223259.GJ9929@scaer> (raw)
In-Reply-To: <99ce17ed-eac5-bef0-4ac4-c74753925163@mind.be>

Arnout, All,

On 2017-07-22 23:24 +0200, Arnout Vandecappelle spake thusly:
>  This makes no sense to me...
> 
> On 18-07-17 19:25, Yann E. MORIN wrote:
> > Setting the root pasword is done in a target-finalize hook, so we do not
> > need to enforce a dependency from the skeleton onto host-mkpasswd.
> > 
> > Dropping that dependency will simplify making skeleton a virtual
> > package (in up-coming changes).
> 
>  How so? What's wrong with
> 
> SKELETON_COMMON_DEPENDENCIES += host-mkpasswd
> 
> in exactly the same place?

Indeed, it does not simplify much. But at least, that was a little bit
less code I had to carry over to the new skeleton infra, see below [0].

And as you've seen, this series was no picnic...

>  You forgot to mention the other interesting bit: it is now selected, so we are
> still sure it will get built before target-finalize.



> > This however introduces a slight change in behaviour: previously,
> > host-mkpasswd would only be built if we needed to hash the root password
> > from its plain-text value. Now, host-mkpasswd is always built as soon as
> > the root password is non-empty, even if already pre-hashed.
> > 
> > Since host-mkpasswd is a really tiny weeny package bundled in Buidlroot,
>                                                                 Buildroot

I think I have unconciously associated Buildroot and Beetlejuice in my
head, as Buidlroot sounds too much like Beetlejuice, and I do this typo
all the time. Not that I never typoes anything else, for that matters...
;-]

> > with only two C files, built as a single unit with a single gcc call,
> > the overhead is really minimal. Compared to the simplifications this
> > will allow in the skeleton packages (plural: common, sysv, systemd,
> > custom) to come, this overhead is acceptable.
> > 
> > Yet another simplification, even if small, to ease providing multiple
> > skeletons.

[0[] here I said it was but a small simplification. ;-)

> > Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> 
>  Although I don't think it's really *necessary* to remove the dependency, it is
> certainly more correct. And we want to select host packages from Config.in
> anyway on the long run, so doing it only for not-yet-hashed passwords won't be
> possible anyway. Therefore:
> 
> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Thanks! :-)

Regards,
Yann E. MORIN.

>  Regards,
>  Arnout
> 
> > ---
> >  package/skeleton/skeleton.mk | 1 -
> >  system/Config.in             | 1 +
> >  2 files changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/package/skeleton/skeleton.mk b/package/skeleton/skeleton.mk
> > index 4a66f6ceca..4ec1ecbb51 100644
> > --- a/package/skeleton/skeleton.mk
> > +++ b/package/skeleton/skeleton.mk
> > @@ -121,7 +121,6 @@ SKELETON_ROOT_PASSWORD =
> >  else ifneq ($(filter $$1$$% $$5$$% $$6$$%,$(SKELETON_TARGET_GENERIC_ROOT_PASSWD)),)
> >  SKELETON_ROOT_PASSWORD = '$(SKELETON_TARGET_GENERIC_ROOT_PASSWD)'
> >  else
> > -SKELETON_DEPENDENCIES += host-mkpasswd
> >  # This variable will only be evaluated in the finalize stage, so we can
> >  # be sure that host-mkpasswd will have already been built by that time.
> >  SKELETON_ROOT_PASSWORD = "`$(MKPASSWD) -m "$(SKELETON_TARGET_GENERIC_PASSWD_METHOD)" "$(SKELETON_TARGET_GENERIC_ROOT_PASSWD)"`"
> > diff --git a/system/Config.in b/system/Config.in
> > index ed539dcbe0..5cb921f108 100644
> > --- a/system/Config.in
> > +++ b/system/Config.in
> > @@ -224,6 +224,7 @@ config BR2_ROOTFS_MERGED_USR
> >  config BR2_TARGET_ENABLE_ROOT_LOGIN
> >  	bool "Enable root login with password"
> >  	default y
> > +	select BR2_PACKAGE_HOST_MKPASSWD if BR2_TARGET_GENERIC_ROOT_PASSWD != ""
> >  	help
> >  	  Allow root to log in with a password.
> >  
> > 
> 
> -- 
> Arnout Vandecappelle                          arnout at mind be
> Senior Embedded Software Architect            +32-16-286500
> Essensium/Mind                                http://www.mind.be
> G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
> LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
> GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

  reply	other threads:[~2017-07-22 22:32 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-18 17:25 [Buildroot] [PATCH 00/20] system: properly handle systemd as init system Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 01/20] support/tests: allow properly indented config fragment Yann E. MORIN
2017-07-18 20:45   ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 02/20] core/pkg-generic: add variable to skip skeleton dependency Yann E. MORIN
2017-07-22 12:27   ` Arnout Vandecappelle
2017-07-23  9:12     ` Peter Korsgaard
2017-07-23  9:21       ` Yann E. MORIN
2017-07-23 13:01         ` Peter Korsgaard
2017-07-22 13:41   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 03/20] package/skeleton: add macro to rsync skeleton directory Yann E. MORIN
2017-07-22 12:34   ` Arnout Vandecappelle
2017-07-22 13:02   ` Arnout Vandecappelle
2017-07-22 14:33     ` Yann E. MORIN
2017-07-22 13:42   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 04/20] package/skeleton: make SKELETON_LIB_SYMLINK a macro Yann E. MORIN
2017-07-22 12:56   ` Arnout Vandecappelle
2017-07-22 19:47     ` Thomas Petazzoni
2017-07-22 21:02       ` [Buildroot] Is MIPS_NABI32 a 64-bit architecture? [was: [PATCH 04/20] package/skeleton: make SKELETON_LIB_SYMLINK a macro] Arnout Vandecappelle
2017-07-22 13:50   ` [Buildroot] [PATCH 04/20] package/skeleton: make SKELETON_LIB_SYMLINK a macro Thomas Petazzoni
2017-07-22 14:23     ` Yann E. MORIN
2017-07-22 19:45   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 05/20] system: provide package-wide system variables and macros Yann E. MORIN
2017-07-22 13:00   ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 06/20] system: move setting getty to the corresponding init systems Yann E. MORIN
2017-07-22 13:11   ` Arnout Vandecappelle
2017-07-22 19:57     ` Thomas Petazzoni
2017-07-22 21:13       ` Arnout Vandecappelle
2017-07-22 20:34   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 07/20] system: move remounting / " Yann E. MORIN
2017-07-22 13:16   ` Arnout Vandecappelle
2017-07-22 20:36   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 08/20] system: with no init system, only allow custom skeleton Yann E. MORIN
2017-07-22 13:28   ` Arnout Vandecappelle
2017-07-22 13:53     ` Yann E. MORIN
2017-07-22 21:18       ` Arnout Vandecappelle
2017-07-22 22:12         ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 09/20] package/skeleton: drop dependency on host-mkpasswd Yann E. MORIN
2017-07-22 21:24   ` Arnout Vandecappelle
2017-07-22 22:32     ` Yann E. MORIN [this message]
2017-07-18 17:25 ` [Buildroot] [PATCH 10/20] package/skeleton: select it rather than default to y Yann E. MORIN
2017-07-22 21:47   ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 11/20] package/skeleton: split out into skeleton-custom Yann E. MORIN
2017-07-22 22:31   ` Arnout Vandecappelle
2017-07-22 22:38     ` Arnout Vandecappelle
2017-07-23  9:45       ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 12/20] package/skeleton: split out into skeleton-common Yann E. MORIN
2017-07-22 23:06   ` Arnout Vandecappelle
2017-07-23  9:48     ` Yann E. MORIN
2017-07-23 20:32       ` Arnout Vandecappelle
2017-07-24  7:19         ` Thomas Petazzoni
2017-07-24 15:19           ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 13/20] package/skeleton: make it a virtual package Yann E. MORIN
2017-07-22 23:36   ` Arnout Vandecappelle
2017-07-23 10:13     ` Yann E. MORIN
2017-07-23 20:48       ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 14/20] package/skeleton-common: simplify staging install Yann E. MORIN
2017-07-22 23:38   ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 15/20] package/skeleton: introduce sysv- and systemd-specific skeletons Yann E. MORIN
2017-07-22 23:49   ` Arnout Vandecappelle
2017-07-23 10:15     ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 16/20] system: separate sysv and systemd parts of the skeleton Yann E. MORIN
2017-07-23  0:08   ` Arnout Vandecappelle
2017-07-23  0:13     ` Arnout Vandecappelle
2017-07-23 10:31       ` Yann E. MORIN
2017-07-23 10:24     ` Yann E. MORIN
2017-07-23 13:32       ` Arnout Vandecappelle
2017-07-23 13:39         ` Arnout Vandecappelle
2017-07-23 13:41           ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 17/20] sytem: no-init systems may use our default, common skeleton Yann E. MORIN
2017-07-23  0:18   ` Arnout Vandecappelle
2017-07-23 10:37     ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 18/20] fs: add pre- and post-command hooks Yann E. MORIN
2017-07-23 13:42   ` Arnout Vandecappelle
2017-07-23 14:17     ` Yann E. MORIN
2017-07-23 21:51       ` Arnout Vandecappelle
2017-07-24 16:01         ` Yann E. MORIN
2017-07-24 22:23           ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 19/20] system: make systemd work on a read-only rootfs Yann E. MORIN
2017-07-23 22:18   ` Arnout Vandecappelle
2017-07-24 15:45     ` Yann E. MORIN
2017-07-24 22:44       ` Arnout Vandecappelle
2017-07-25 16:07         ` Yann E. MORIN
2017-07-25 22:24           ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 20/20] support/testing: add runtime testing for init systems Yann E. MORIN
2017-07-22 14:32   ` Arnout Vandecappelle
2017-07-22 14:45     ` Yann E. MORIN
2017-07-22 19:30       ` Thomas Petazzoni
2017-07-22 19:53       ` Arnout Vandecappelle
2017-07-22 20:10         ` Thomas Petazzoni
2017-07-22 22:50           ` Yann E. MORIN
2017-07-23  7:58             ` Thomas Petazzoni
2017-07-23  9:26               ` Yann E. MORIN
2017-07-23 18:13                 ` [Buildroot] TestIso9660GrubExternal and TestIso9660GrubInternal failing Ricardo Martincoski
2017-07-23 20:02                   ` Yann E. MORIN
2017-07-23 20:28                     ` Yann E. MORIN
2017-07-23 20:39                     ` Yann E. MORIN
2017-07-24  7:13                   ` Thomas Petazzoni
2017-07-24 11:07                     ` Ricardo Martincoski
2017-07-24 15:18                     ` Yann E. MORIN
2017-07-24 15:20   ` [Buildroot] [PATCH 20/20] support/testing: add runtime testing for init systems Andrey Smirnov
2017-07-24 15:50     ` Yann E. MORIN
2017-07-19 20:14 ` [Buildroot] [PATCH 00/20] system: properly handle systemd as init system Andrey Yurovsky
2017-07-19 20:53   ` Thomas Petazzoni
2017-07-19 22:17     ` Andrey Yurovsky
2017-07-20  7:32       ` Thomas Petazzoni
2017-07-21 22:15         ` Marcus Hoffmann
2017-07-28 20:41           ` Marcus Hoffmann
2017-07-28 20:54             ` Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170722223259.GJ9929@scaer \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.