From: Nicolin Chen <nicoleotsuka@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: alsa-devel@alsa-project.org, Xiubo Li <Xiubo.Lee@gmail.com>,
Liam Girdwood <lgirdwood@gmail.com>, Timur Tabi <timur@tabi.org>,
Mark Brown <broonie@kernel.org>,
Fabio Estevam <fabio.estevam@nxp.com>,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v3] ASoC: fsl: Convert to using %pOF instead of full_name
Date: Mon, 7 Aug 2017 20:27:43 -0700 [thread overview]
Message-ID: <20170808032742.GA10188@Asurada> (raw)
In-Reply-To: <20170807232919.30247-1-robh@kernel.org>
On Mon, Aug 07, 2017 at 06:29:18PM -0500, Rob Herring wrote:
> Now that we have a custom printf format specifier, convert users of
> full_name to use %pOF instead. This is preparation to remove storing
> of the full path string for each node.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Timur Tabi <timur@tabi.org>
> Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Thanks
> Cc: Xiubo Li <Xiubo.Lee@gmail.com>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: alsa-devel@alsa-project.org
> ---
> v3: Split ASoC changes to separate patch
>
> sound/soc/fsl/fsl_dma.c | 4 ++--
> sound/soc/fsl/imx-audmux.c | 16 ++++++++--------
> 2 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
> index ccadefceeff2..ed8ea002902d 100644
> --- a/sound/soc/fsl/fsl_dma.c
> +++ b/sound/soc/fsl/fsl_dma.c
> @@ -897,8 +897,8 @@ static int fsl_soc_dma_probe(struct platform_device *pdev)
>
> ret = of_address_to_resource(ssi_np, 0, &res);
> if (ret) {
> - dev_err(&pdev->dev, "could not determine resources for %s\n",
> - ssi_np->full_name);
> + dev_err(&pdev->dev, "could not determine resources for %pOF\n",
> + ssi_np);
> of_node_put(ssi_np);
> return ret;
> }
> diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
> index fc57da341d61..392d5eef356d 100644
> --- a/sound/soc/fsl/imx-audmux.c
> +++ b/sound/soc/fsl/imx-audmux.c
> @@ -268,13 +268,13 @@ static int imx_audmux_parse_dt_defaults(struct platform_device *pdev,
>
> ret = of_property_read_u32(child, "fsl,audmux-port", &port);
> if (ret) {
> - dev_warn(&pdev->dev, "Failed to get fsl,audmux-port of child node \"%s\"\n",
> - child->full_name);
> + dev_warn(&pdev->dev, "Failed to get fsl,audmux-port of child node \"%pOF\"\n",
> + child);
> continue;
> }
> if (!of_property_read_bool(child, "fsl,port-config")) {
> - dev_warn(&pdev->dev, "child node \"%s\" does not have property fsl,port-config\n",
> - child->full_name);
> + dev_warn(&pdev->dev, "child node \"%pOF\" does not have property fsl,port-config\n",
> + child);
> continue;
> }
>
> @@ -292,15 +292,15 @@ static int imx_audmux_parse_dt_defaults(struct platform_device *pdev,
> }
>
> if (ret != -EOVERFLOW) {
> - dev_err(&pdev->dev, "Failed to read u32 at index %d of child %s\n",
> - i, child->full_name);
> + dev_err(&pdev->dev, "Failed to read u32 at index %d of child %pOF\n",
> + i, child);
> continue;
> }
>
> if (audmux_type == IMX31_AUDMUX) {
> if (i % 2) {
> - dev_err(&pdev->dev, "One pdcr value is missing in child node %s\n",
> - child->full_name);
> + dev_err(&pdev->dev, "One pdcr value is missing in child node %pOF\n",
> + child);
> continue;
> }
> imx_audmux_v2_configure_port(port, ptcr, pdcr);
> --
> 2.11.0
>
WARNING: multiple messages have this Message-ID (diff)
From: Nicolin Chen <nicoleotsuka@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>, Timur Tabi <timur@tabi.org>,
Xiubo Li <Xiubo.Lee@gmail.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linuxppc-dev@lists.ozlabs.org, alsa-devel@alsa-project.org
Subject: Re: [PATCH v3] ASoC: fsl: Convert to using %pOF instead of full_name
Date: Mon, 7 Aug 2017 20:27:43 -0700 [thread overview]
Message-ID: <20170808032742.GA10188@Asurada> (raw)
In-Reply-To: <20170807232919.30247-1-robh@kernel.org>
On Mon, Aug 07, 2017 at 06:29:18PM -0500, Rob Herring wrote:
> Now that we have a custom printf format specifier, convert users of
> full_name to use %pOF instead. This is preparation to remove storing
> of the full path string for each node.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Timur Tabi <timur@tabi.org>
> Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Thanks
> Cc: Xiubo Li <Xiubo.Lee@gmail.com>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: alsa-devel@alsa-project.org
> ---
> v3: Split ASoC changes to separate patch
>
> sound/soc/fsl/fsl_dma.c | 4 ++--
> sound/soc/fsl/imx-audmux.c | 16 ++++++++--------
> 2 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
> index ccadefceeff2..ed8ea002902d 100644
> --- a/sound/soc/fsl/fsl_dma.c
> +++ b/sound/soc/fsl/fsl_dma.c
> @@ -897,8 +897,8 @@ static int fsl_soc_dma_probe(struct platform_device *pdev)
>
> ret = of_address_to_resource(ssi_np, 0, &res);
> if (ret) {
> - dev_err(&pdev->dev, "could not determine resources for %s\n",
> - ssi_np->full_name);
> + dev_err(&pdev->dev, "could not determine resources for %pOF\n",
> + ssi_np);
> of_node_put(ssi_np);
> return ret;
> }
> diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
> index fc57da341d61..392d5eef356d 100644
> --- a/sound/soc/fsl/imx-audmux.c
> +++ b/sound/soc/fsl/imx-audmux.c
> @@ -268,13 +268,13 @@ static int imx_audmux_parse_dt_defaults(struct platform_device *pdev,
>
> ret = of_property_read_u32(child, "fsl,audmux-port", &port);
> if (ret) {
> - dev_warn(&pdev->dev, "Failed to get fsl,audmux-port of child node \"%s\"\n",
> - child->full_name);
> + dev_warn(&pdev->dev, "Failed to get fsl,audmux-port of child node \"%pOF\"\n",
> + child);
> continue;
> }
> if (!of_property_read_bool(child, "fsl,port-config")) {
> - dev_warn(&pdev->dev, "child node \"%s\" does not have property fsl,port-config\n",
> - child->full_name);
> + dev_warn(&pdev->dev, "child node \"%pOF\" does not have property fsl,port-config\n",
> + child);
> continue;
> }
>
> @@ -292,15 +292,15 @@ static int imx_audmux_parse_dt_defaults(struct platform_device *pdev,
> }
>
> if (ret != -EOVERFLOW) {
> - dev_err(&pdev->dev, "Failed to read u32 at index %d of child %s\n",
> - i, child->full_name);
> + dev_err(&pdev->dev, "Failed to read u32 at index %d of child %pOF\n",
> + i, child);
> continue;
> }
>
> if (audmux_type == IMX31_AUDMUX) {
> if (i % 2) {
> - dev_err(&pdev->dev, "One pdcr value is missing in child node %s\n",
> - child->full_name);
> + dev_err(&pdev->dev, "One pdcr value is missing in child node %pOF\n",
> + child);
> continue;
> }
> imx_audmux_v2_configure_port(port, ptcr, pdcr);
> --
> 2.11.0
>
next prev parent reply other threads:[~2017-08-08 3:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-07 23:29 [PATCH v3] ASoC: fsl: Convert to using %pOF instead of full_name Rob Herring
2017-08-07 23:29 ` Rob Herring
2017-08-08 3:27 ` Nicolin Chen [this message]
2017-08-08 3:27 ` Nicolin Chen
2017-08-08 11:06 ` Applied "ASoC: fsl: Convert to using %pOF instead of full_name" to the asoc tree Mark Brown
2017-08-08 11:06 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170808032742.GA10188@Asurada \
--to=nicoleotsuka@gmail.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=lgirdwood@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=robh@kernel.org \
--cc=timur@tabi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.