From: Guenter Roeck <linux@roeck-us.net>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Wim Van Sebroeck <wim@iguana.be>,
Jonas Jensen <jonas.jensen@gmail.com>,
Andrew Jeffery <andrew@aj.id.au>, Joel Stanley <joel@jms.id.au>,
linux-arm-kernel@lists.infradead.org,
linux-watchdog@vger.kernel.org
Subject: Re: [PATCH 08/11] watchdog: ftwdt010/moxart: Merge MOXA ART into FTWDT010
Date: Mon, 14 Aug 2017 09:09:32 -0700 [thread overview]
Message-ID: <20170814160932.GD7025@roeck-us.net> (raw)
In-Reply-To: <20170812184318.10144-9-linus.walleij@linaro.org>
On Sat, Aug 12, 2017 at 08:43:15PM +0200, Linus Walleij wrote:
> These two drivers is for the same hardware, the only difference
> is that Gemini uses the EXTCLK @5MHz by default (it also works
> fine using PCLK) while the MOXA ART is using the PCLK to clock
> the watchdog.
>
> Delete the old MOXA ART driver and augment the FTWDT010 to
> probe on this platform too, fetching the operating frequency
> from the PCLK. Select the driver by default for ARCH_MOXART
> to make a smooth transition of the platform.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/watchdog/Kconfig | 11 +--
> drivers/watchdog/Makefile | 1 -
> drivers/watchdog/ftwdt010_wdt.c | 1 +
> drivers/watchdog/moxart_wdt.c | 178 ----------------------------------------
> 4 files changed, 2 insertions(+), 189 deletions(-)
> delete mode 100644 drivers/watchdog/moxart_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index fd44a542036a..beef6bb5c6d9 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -326,6 +326,7 @@ config FTWDT010_WATCHDOG
> depends on ARM || COMPILE_TEST
> select WATCHDOG_CORE
> default ARCH_GEMINI
> + default ARCH_MOXART
Can one have more than one default statement ? What is the semantics ?
Just making sure that it isn't "last one wins".
> help
> Say Y here if to include support for the Faraday Technology
> FTWDT010 watchdog timer embedded in the Cortina Systems Gemini
> @@ -609,16 +610,6 @@ config RETU_WATCHDOG
> To compile this driver as a module, choose M here: the
> module will be called retu_wdt.
>
> -config MOXART_WDT
> - tristate "MOXART watchdog"
> - depends on ARCH_MOXART || COMPILE_TEST
> - help
> - Say Y here to include Watchdog timer support for the watchdog
> - existing on the MOXA ART SoC series platforms.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called moxart_wdt.
> -
> config SIRFSOC_WATCHDOG
> tristate "SiRFSOC watchdog"
> depends on ARCH_SIRF || COMPILE_TEST
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index df91d7db821c..fcab71f0a1c7 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -68,7 +68,6 @@ obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
> obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
> obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
> obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
> -obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
> obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
> obj-$(CONFIG_ST_LPC_WATCHDOG) += st_lpc_wdt.o
> obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
> diff --git a/drivers/watchdog/ftwdt010_wdt.c b/drivers/watchdog/ftwdt010_wdt.c
> index 7fc865eea28d..912b55e67110 100644
> --- a/drivers/watchdog/ftwdt010_wdt.c
> +++ b/drivers/watchdog/ftwdt010_wdt.c
> @@ -298,6 +298,7 @@ static const struct dev_pm_ops ftwdt010_wdt_dev_pm_ops = {
> static const struct of_device_id ftwdt010_wdt_match[] = {
> { .compatible = "faraday,ftwdt010" },
> { .compatible = "cortina,gemini-watchdog" },
> + { .compatible = "moxa,moxart-watchdog" },
> {},
> };
> MODULE_DEVICE_TABLE(of, ftwdt010_wdt_match);
> diff --git a/drivers/watchdog/moxart_wdt.c b/drivers/watchdog/moxart_wdt.c
> deleted file mode 100644
> index 2c4a73d1e214..000000000000
> --- a/drivers/watchdog/moxart_wdt.c
> +++ /dev/null
> @@ -1,178 +0,0 @@
> -/*
> - * MOXA ART SoCs watchdog driver.
> - *
> - * Copyright (C) 2013 Jonas Jensen
> - *
> - * Jonas Jensen <jonas.jensen@gmail.com>
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -#include <linux/module.h>
> -#include <linux/err.h>
> -#include <linux/kernel.h>
> -#include <linux/platform_device.h>
> -#include <linux/watchdog.h>
> -#include <linux/moduleparam.h>
> -
> -#define REG_COUNT 0x4
> -#define REG_MODE 0x8
> -#define REG_ENABLE 0xC
> -
> -struct moxart_wdt_dev {
> - struct watchdog_device dev;
> - void __iomem *base;
> - unsigned int clock_frequency;
> -};
> -
> -static int heartbeat;
> -
> -static int moxart_wdt_restart(struct watchdog_device *wdt_dev,
> - unsigned long action, void *data)
> -{
> - struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
> -
> - writel(1, moxart_wdt->base + REG_COUNT);
> - writel(0x5ab9, moxart_wdt->base + REG_MODE);
> - writel(0x03, moxart_wdt->base + REG_ENABLE);
> -
> - return 0;
> -}
> -
> -static int moxart_wdt_stop(struct watchdog_device *wdt_dev)
> -{
> - struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
> -
> - writel(0, moxart_wdt->base + REG_ENABLE);
> -
> - return 0;
> -}
> -
> -static int moxart_wdt_start(struct watchdog_device *wdt_dev)
> -{
> - struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
> -
> - writel(moxart_wdt->clock_frequency * wdt_dev->timeout,
> - moxart_wdt->base + REG_COUNT);
> - writel(0x5ab9, moxart_wdt->base + REG_MODE);
> - writel(0x03, moxart_wdt->base + REG_ENABLE);
> -
> - return 0;
> -}
> -
> -static int moxart_wdt_set_timeout(struct watchdog_device *wdt_dev,
> - unsigned int timeout)
> -{
> - wdt_dev->timeout = timeout;
> -
> - return 0;
> -}
> -
> -static const struct watchdog_info moxart_wdt_info = {
> - .identity = "moxart-wdt",
> - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> - WDIOF_MAGICCLOSE,
> -};
> -
> -static const struct watchdog_ops moxart_wdt_ops = {
> - .owner = THIS_MODULE,
> - .start = moxart_wdt_start,
> - .stop = moxart_wdt_stop,
> - .set_timeout = moxart_wdt_set_timeout,
> - .restart = moxart_wdt_restart,
> -};
> -
> -static int moxart_wdt_probe(struct platform_device *pdev)
> -{
> - struct moxart_wdt_dev *moxart_wdt;
> - struct device *dev = &pdev->dev;
> - struct device_node *node = dev->of_node;
> - struct resource *res;
> - struct clk *clk;
> - int err;
> - unsigned int max_timeout;
> - bool nowayout = WATCHDOG_NOWAYOUT;
> -
> - moxart_wdt = devm_kzalloc(dev, sizeof(*moxart_wdt), GFP_KERNEL);
> - if (!moxart_wdt)
> - return -ENOMEM;
> -
> - platform_set_drvdata(pdev, moxart_wdt);
> -
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - moxart_wdt->base = devm_ioremap_resource(dev, res);
> - if (IS_ERR(moxart_wdt->base))
> - return PTR_ERR(moxart_wdt->base);
> -
> - clk = of_clk_get(node, 0);
> - if (IS_ERR(clk)) {
> - pr_err("%s: of_clk_get failed\n", __func__);
> - return PTR_ERR(clk);
> - }
> -
> - moxart_wdt->clock_frequency = clk_get_rate(clk);
> - if (moxart_wdt->clock_frequency == 0) {
> - pr_err("%s: incorrect clock frequency\n", __func__);
> - return -EINVAL;
> - }
> -
> - max_timeout = UINT_MAX / moxart_wdt->clock_frequency;
> -
> - moxart_wdt->dev.info = &moxart_wdt_info;
> - moxart_wdt->dev.ops = &moxart_wdt_ops;
> - moxart_wdt->dev.timeout = max_timeout;
> - moxart_wdt->dev.min_timeout = 1;
> - moxart_wdt->dev.max_timeout = max_timeout;
> - moxart_wdt->dev.parent = dev;
> -
> - watchdog_init_timeout(&moxart_wdt->dev, heartbeat, dev);
> - watchdog_set_nowayout(&moxart_wdt->dev, nowayout);
> - watchdog_set_restart_priority(&moxart_wdt->dev, 128);
> -
> - watchdog_set_drvdata(&moxart_wdt->dev, moxart_wdt);
> -
> - err = watchdog_register_device(&moxart_wdt->dev);
> - if (err)
> - return err;
> -
> - dev_dbg(dev, "Watchdog enabled (heartbeat=%d sec, nowayout=%d)\n",
> - moxart_wdt->dev.timeout, nowayout);
> -
> - return 0;
> -}
> -
> -static int moxart_wdt_remove(struct platform_device *pdev)
> -{
> - struct moxart_wdt_dev *moxart_wdt = platform_get_drvdata(pdev);
> -
> - moxart_wdt_stop(&moxart_wdt->dev);
> -
> - return 0;
> -}
> -
> -static const struct of_device_id moxart_watchdog_match[] = {
> - { .compatible = "moxa,moxart-watchdog" },
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, moxart_watchdog_match);
> -
> -static struct platform_driver moxart_wdt_driver = {
> - .probe = moxart_wdt_probe,
> - .remove = moxart_wdt_remove,
> - .driver = {
> - .name = "moxart-watchdog",
> - .of_match_table = moxart_watchdog_match,
> - },
> -};
> -module_platform_driver(moxart_wdt_driver);
> -
> -module_param(heartbeat, int, 0);
> -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds");
> -
> -MODULE_DESCRIPTION("MOXART watchdog driver");
> -MODULE_LICENSE("GPL");
> -MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
> --
> 2.13.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: linux@roeck-us.net (Guenter Roeck)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/11] watchdog: ftwdt010/moxart: Merge MOXA ART into FTWDT010
Date: Mon, 14 Aug 2017 09:09:32 -0700 [thread overview]
Message-ID: <20170814160932.GD7025@roeck-us.net> (raw)
In-Reply-To: <20170812184318.10144-9-linus.walleij@linaro.org>
On Sat, Aug 12, 2017 at 08:43:15PM +0200, Linus Walleij wrote:
> These two drivers is for the same hardware, the only difference
> is that Gemini uses the EXTCLK @5MHz by default (it also works
> fine using PCLK) while the MOXA ART is using the PCLK to clock
> the watchdog.
>
> Delete the old MOXA ART driver and augment the FTWDT010 to
> probe on this platform too, fetching the operating frequency
> from the PCLK. Select the driver by default for ARCH_MOXART
> to make a smooth transition of the platform.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/watchdog/Kconfig | 11 +--
> drivers/watchdog/Makefile | 1 -
> drivers/watchdog/ftwdt010_wdt.c | 1 +
> drivers/watchdog/moxart_wdt.c | 178 ----------------------------------------
> 4 files changed, 2 insertions(+), 189 deletions(-)
> delete mode 100644 drivers/watchdog/moxart_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index fd44a542036a..beef6bb5c6d9 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -326,6 +326,7 @@ config FTWDT010_WATCHDOG
> depends on ARM || COMPILE_TEST
> select WATCHDOG_CORE
> default ARCH_GEMINI
> + default ARCH_MOXART
Can one have more than one default statement ? What is the semantics ?
Just making sure that it isn't "last one wins".
> help
> Say Y here if to include support for the Faraday Technology
> FTWDT010 watchdog timer embedded in the Cortina Systems Gemini
> @@ -609,16 +610,6 @@ config RETU_WATCHDOG
> To compile this driver as a module, choose M here: the
> module will be called retu_wdt.
>
> -config MOXART_WDT
> - tristate "MOXART watchdog"
> - depends on ARCH_MOXART || COMPILE_TEST
> - help
> - Say Y here to include Watchdog timer support for the watchdog
> - existing on the MOXA ART SoC series platforms.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called moxart_wdt.
> -
> config SIRFSOC_WATCHDOG
> tristate "SiRFSOC watchdog"
> depends on ARCH_SIRF || COMPILE_TEST
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index df91d7db821c..fcab71f0a1c7 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -68,7 +68,6 @@ obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
> obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
> obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
> obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
> -obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
> obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
> obj-$(CONFIG_ST_LPC_WATCHDOG) += st_lpc_wdt.o
> obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
> diff --git a/drivers/watchdog/ftwdt010_wdt.c b/drivers/watchdog/ftwdt010_wdt.c
> index 7fc865eea28d..912b55e67110 100644
> --- a/drivers/watchdog/ftwdt010_wdt.c
> +++ b/drivers/watchdog/ftwdt010_wdt.c
> @@ -298,6 +298,7 @@ static const struct dev_pm_ops ftwdt010_wdt_dev_pm_ops = {
> static const struct of_device_id ftwdt010_wdt_match[] = {
> { .compatible = "faraday,ftwdt010" },
> { .compatible = "cortina,gemini-watchdog" },
> + { .compatible = "moxa,moxart-watchdog" },
> {},
> };
> MODULE_DEVICE_TABLE(of, ftwdt010_wdt_match);
> diff --git a/drivers/watchdog/moxart_wdt.c b/drivers/watchdog/moxart_wdt.c
> deleted file mode 100644
> index 2c4a73d1e214..000000000000
> --- a/drivers/watchdog/moxart_wdt.c
> +++ /dev/null
> @@ -1,178 +0,0 @@
> -/*
> - * MOXA ART SoCs watchdog driver.
> - *
> - * Copyright (C) 2013 Jonas Jensen
> - *
> - * Jonas Jensen <jonas.jensen@gmail.com>
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -#include <linux/module.h>
> -#include <linux/err.h>
> -#include <linux/kernel.h>
> -#include <linux/platform_device.h>
> -#include <linux/watchdog.h>
> -#include <linux/moduleparam.h>
> -
> -#define REG_COUNT 0x4
> -#define REG_MODE 0x8
> -#define REG_ENABLE 0xC
> -
> -struct moxart_wdt_dev {
> - struct watchdog_device dev;
> - void __iomem *base;
> - unsigned int clock_frequency;
> -};
> -
> -static int heartbeat;
> -
> -static int moxart_wdt_restart(struct watchdog_device *wdt_dev,
> - unsigned long action, void *data)
> -{
> - struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
> -
> - writel(1, moxart_wdt->base + REG_COUNT);
> - writel(0x5ab9, moxart_wdt->base + REG_MODE);
> - writel(0x03, moxart_wdt->base + REG_ENABLE);
> -
> - return 0;
> -}
> -
> -static int moxart_wdt_stop(struct watchdog_device *wdt_dev)
> -{
> - struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
> -
> - writel(0, moxart_wdt->base + REG_ENABLE);
> -
> - return 0;
> -}
> -
> -static int moxart_wdt_start(struct watchdog_device *wdt_dev)
> -{
> - struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
> -
> - writel(moxart_wdt->clock_frequency * wdt_dev->timeout,
> - moxart_wdt->base + REG_COUNT);
> - writel(0x5ab9, moxart_wdt->base + REG_MODE);
> - writel(0x03, moxart_wdt->base + REG_ENABLE);
> -
> - return 0;
> -}
> -
> -static int moxart_wdt_set_timeout(struct watchdog_device *wdt_dev,
> - unsigned int timeout)
> -{
> - wdt_dev->timeout = timeout;
> -
> - return 0;
> -}
> -
> -static const struct watchdog_info moxart_wdt_info = {
> - .identity = "moxart-wdt",
> - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> - WDIOF_MAGICCLOSE,
> -};
> -
> -static const struct watchdog_ops moxart_wdt_ops = {
> - .owner = THIS_MODULE,
> - .start = moxart_wdt_start,
> - .stop = moxart_wdt_stop,
> - .set_timeout = moxart_wdt_set_timeout,
> - .restart = moxart_wdt_restart,
> -};
> -
> -static int moxart_wdt_probe(struct platform_device *pdev)
> -{
> - struct moxart_wdt_dev *moxart_wdt;
> - struct device *dev = &pdev->dev;
> - struct device_node *node = dev->of_node;
> - struct resource *res;
> - struct clk *clk;
> - int err;
> - unsigned int max_timeout;
> - bool nowayout = WATCHDOG_NOWAYOUT;
> -
> - moxart_wdt = devm_kzalloc(dev, sizeof(*moxart_wdt), GFP_KERNEL);
> - if (!moxart_wdt)
> - return -ENOMEM;
> -
> - platform_set_drvdata(pdev, moxart_wdt);
> -
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - moxart_wdt->base = devm_ioremap_resource(dev, res);
> - if (IS_ERR(moxart_wdt->base))
> - return PTR_ERR(moxart_wdt->base);
> -
> - clk = of_clk_get(node, 0);
> - if (IS_ERR(clk)) {
> - pr_err("%s: of_clk_get failed\n", __func__);
> - return PTR_ERR(clk);
> - }
> -
> - moxart_wdt->clock_frequency = clk_get_rate(clk);
> - if (moxart_wdt->clock_frequency == 0) {
> - pr_err("%s: incorrect clock frequency\n", __func__);
> - return -EINVAL;
> - }
> -
> - max_timeout = UINT_MAX / moxart_wdt->clock_frequency;
> -
> - moxart_wdt->dev.info = &moxart_wdt_info;
> - moxart_wdt->dev.ops = &moxart_wdt_ops;
> - moxart_wdt->dev.timeout = max_timeout;
> - moxart_wdt->dev.min_timeout = 1;
> - moxart_wdt->dev.max_timeout = max_timeout;
> - moxart_wdt->dev.parent = dev;
> -
> - watchdog_init_timeout(&moxart_wdt->dev, heartbeat, dev);
> - watchdog_set_nowayout(&moxart_wdt->dev, nowayout);
> - watchdog_set_restart_priority(&moxart_wdt->dev, 128);
> -
> - watchdog_set_drvdata(&moxart_wdt->dev, moxart_wdt);
> -
> - err = watchdog_register_device(&moxart_wdt->dev);
> - if (err)
> - return err;
> -
> - dev_dbg(dev, "Watchdog enabled (heartbeat=%d sec, nowayout=%d)\n",
> - moxart_wdt->dev.timeout, nowayout);
> -
> - return 0;
> -}
> -
> -static int moxart_wdt_remove(struct platform_device *pdev)
> -{
> - struct moxart_wdt_dev *moxart_wdt = platform_get_drvdata(pdev);
> -
> - moxart_wdt_stop(&moxart_wdt->dev);
> -
> - return 0;
> -}
> -
> -static const struct of_device_id moxart_watchdog_match[] = {
> - { .compatible = "moxa,moxart-watchdog" },
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, moxart_watchdog_match);
> -
> -static struct platform_driver moxart_wdt_driver = {
> - .probe = moxart_wdt_probe,
> - .remove = moxart_wdt_remove,
> - .driver = {
> - .name = "moxart-watchdog",
> - .of_match_table = moxart_watchdog_match,
> - },
> -};
> -module_platform_driver(moxart_wdt_driver);
> -
> -module_param(heartbeat, int, 0);
> -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds");
> -
> -MODULE_DESCRIPTION("MOXART watchdog driver");
> -MODULE_LICENSE("GPL");
> -MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
> --
> 2.13.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-08-14 16:09 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-12 18:43 [PATCH 00/11] watchdog: Consolidate FTWDT010 derivatives Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-12 18:43 ` [PATCH 01/11] watchdog: gemini/ftwdt010: rename DT bindings Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-14 14:55 ` Guenter Roeck
2017-08-14 14:55 ` Guenter Roeck
2017-08-14 14:55 ` Guenter Roeck
2017-08-17 20:32 ` Rob Herring
2017-08-17 20:32 ` Rob Herring
2017-08-17 20:32 ` Rob Herring
2017-08-12 18:43 ` [PATCH 02/11] watchdog: gemini/ftwdt010: rename driver and symbols Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-14 15:01 ` Guenter Roeck
2017-08-14 15:01 ` Guenter Roeck
2017-08-24 20:45 ` Linus Walleij
2017-08-24 20:45 ` Linus Walleij
2017-08-27 17:14 ` Guenter Roeck
2017-08-27 17:14 ` Guenter Roeck
2017-08-12 18:43 ` [PATCH 03/11] watchdog: ftwdt010: Make interrupt optional Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-14 15:09 ` Guenter Roeck
2017-08-14 15:09 ` Guenter Roeck
2017-08-12 18:43 ` [PATCH 04/11] watchdog: ftwdt010: Add clock support Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-14 16:05 ` Guenter Roeck
2017-08-14 16:05 ` Guenter Roeck
2017-08-24 20:32 ` Linus Walleij
2017-08-24 20:32 ` Linus Walleij
2017-08-25 23:28 ` Stephen Boyd
2017-08-25 23:28 ` Stephen Boyd
2017-08-27 17:12 ` Guenter Roeck
2017-08-27 17:12 ` Guenter Roeck
2017-08-27 17:06 ` Guenter Roeck
2017-08-27 17:06 ` Guenter Roeck
2017-10-10 19:51 ` Linus Walleij
2017-10-10 19:51 ` Linus Walleij
2017-10-10 20:06 ` Linus Walleij
2017-10-10 20:06 ` Linus Walleij
2017-10-12 3:39 ` Joel Stanley
2017-10-12 3:39 ` Joel Stanley
2017-08-12 18:43 ` [PATCH 05/11] watchdog: ftwdt010: Add restart support Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-12 18:43 ` [PATCH 06/11] watchdog: ftwdt010: Extend DT bindings to derivatives Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-17 20:34 ` Rob Herring
2017-08-17 20:34 ` Rob Herring
2017-08-17 20:34 ` Rob Herring
2017-08-12 18:43 ` [PATCH 07/11] watchdog: ftwdt010: Delete surplus bindings Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-12 18:43 ` [PATCH 08/11] watchdog: ftwdt010/moxart: Merge MOXA ART into FTWDT010 Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-14 16:09 ` Guenter Roeck [this message]
2017-08-14 16:09 ` Guenter Roeck
2017-08-24 20:34 ` Linus Walleij
2017-08-24 20:34 ` Linus Walleij
2017-08-12 18:43 ` [PATCH 09/11] watchdog: ftwdt010/aspeed: Merge Aspeed " Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-14 15:04 ` Guenter Roeck
2017-08-14 15:04 ` Guenter Roeck
2017-08-24 20:41 ` Linus Walleij
2017-08-24 20:41 ` Linus Walleij
2017-08-27 17:13 ` Guenter Roeck
2017-08-27 17:13 ` Guenter Roeck
2017-08-12 18:43 ` [PATCH 10/11] ARM: dts: fix PCLK name on Gemini and MOXA ART Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-08-12 18:43 ` [PATCH 11/11] ARM: dts: Add PCLK to the Aspeed watchdogs Linus Walleij
2017-08-12 18:43 ` Linus Walleij
2017-10-10 20:09 ` Linus Walleij
2017-10-10 20:09 ` Linus Walleij
2017-10-12 3:37 ` Joel Stanley
2017-10-12 3:37 ` Joel Stanley
2017-10-12 7:35 ` Linus Walleij
2017-10-12 7:35 ` Linus Walleij
2017-10-11 3:48 ` Andrew Jeffery
2017-10-11 3:48 ` Andrew Jeffery
2017-10-11 6:32 ` Linus Walleij
2017-10-11 6:32 ` Linus Walleij
2017-10-11 7:14 ` Andrew Jeffery
2017-10-11 7:14 ` Andrew Jeffery
2017-08-14 1:24 ` [PATCH 00/11] watchdog: Consolidate FTWDT010 derivatives Joel Stanley
2017-08-14 1:24 ` Joel Stanley
2017-08-14 3:08 ` Andrew Jeffery
2017-08-14 3:08 ` Andrew Jeffery
2017-08-14 12:36 ` Linus Walleij
2017-08-14 12:36 ` Linus Walleij
2017-08-14 12:31 ` Linus Walleij
2017-08-14 12:31 ` Linus Walleij
2017-08-14 12:39 ` Linus Walleij
2017-08-14 12:39 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170814160932.GD7025@roeck-us.net \
--to=linux@roeck-us.net \
--cc=andrew@aj.id.au \
--cc=joel@jms.id.au \
--cc=jonas.jensen@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.