* layer.conf on openembedded-core ? @ 2017-08-14 7:11 Riko 2017-08-14 15:49 ` Leonardo Sandoval 0 siblings, 1 reply; 11+ messages in thread From: Riko @ 2017-08-14 7:11 UTC (permalink / raw) To: N: Dear Yocto Members, How can I find this file ? == ERROR: Unable to parse /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file /home/bianchi/poky/openembedded-core/conf/layer.conf not found Thanks, Riko ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-14 7:11 layer.conf on openembedded-core ? Riko @ 2017-08-14 15:49 ` Leonardo Sandoval 2017-08-14 15:56 ` Christopher Larson 0 siblings, 1 reply; 11+ messages in thread From: Leonardo Sandoval @ 2017-08-14 15:49 UTC (permalink / raw) To: Riko; +Cc: N: On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: > Dear Yocto Members, > > How can I find this file ? this is a pretty general question. are you running bitbake from the build directory? double check your conf/bblayers.conf and make sure paths there are pointing correctly. > > == > > ERROR: Unable to parse > /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file > /home/bianchi/poky/openembedded-core/conf/layer.conf not found > > > Thanks, > > Riko > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-14 15:49 ` Leonardo Sandoval @ 2017-08-14 15:56 ` Christopher Larson 2017-08-15 0:55 ` Riko 2017-08-15 1:09 ` Riko 0 siblings, 2 replies; 11+ messages in thread From: Christopher Larson @ 2017-08-14 15:56 UTC (permalink / raw) To: Leonardo Sandoval; +Cc: Riko, N: [-- Attachment #1: Type: text/plain, Size: 1026 bytes --] The openembedded-core root isn’t a layer, openembedded-core/meta is. On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval < leonardo.sandoval.gonzalez@linux.intel.com> wrote: > On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: > > Dear Yocto Members, > > > > How can I find this file ? > > > this is a pretty general question. are you running bitbake from the > build directory? double check your conf/bblayers.conf and make sure > paths there are pointing correctly. > > > > > > == > > > > ERROR: Unable to parse > > /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file > > /home/bianchi/poky/openembedded-core/conf/layer.conf not found > > > > > > Thanks, > > > > Riko > > > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > -- Christopher Larson kergoth at gmail dot com Founder - BitBake, OpenEmbedded, OpenZaurus Senior Software Engineer, Mentor Graphics [-- Attachment #2: Type: text/html, Size: 1836 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-14 15:56 ` Christopher Larson @ 2017-08-15 0:55 ` Riko 2017-08-15 1:09 ` Riko 1 sibling, 0 replies; 11+ messages in thread From: Riko @ 2017-08-15 0:55 UTC (permalink / raw) To: Christopher Larson, Leonardo Sandoval; +Cc: N: [-- Attachment #1: Type: text/plain, Size: 1380 bytes --] Thanks for the clue, now it's compiling, On 14/08/17 23:56, Christopher Larson wrote: > The openembedded-core root isn’t a layer, openembedded-core/meta is. > > On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval > <leonardo.sandoval.gonzalez@linux.intel.com > <mailto:leonardo.sandoval.gonzalez@linux.intel.com>> wrote: > > On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: > > Dear Yocto Members, > > > > How can I find this file ? > > > this is a pretty general question. are you running bitbake from the > build directory? double check your conf/bblayers.conf and make sure > paths there are pointing correctly. > > > > > > == > > > > ERROR: Unable to parse > > /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file > > /home/bianchi/poky/openembedded-core/conf/layer.conf not found > > > > > > Thanks, > > > > Riko > > > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > https://lists.yoctoproject.org/listinfo/yocto > <https://lists.yoctoproject.org/listinfo/yocto> > > > > > -- > Christopher Larson > kergoth at gmail dot com > Founder - BitBake, OpenEmbedded, OpenZaurus > Senior Software Engineer, Mentor Graphics [-- Attachment #2: Type: text/html, Size: 3327 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-14 15:56 ` Christopher Larson 2017-08-15 0:55 ` Riko @ 2017-08-15 1:09 ` Riko 2017-08-15 14:12 ` Leonardo Sandoval 1 sibling, 1 reply; 11+ messages in thread From: Riko @ 2017-08-15 1:09 UTC (permalink / raw) To: Christopher Larson, Leonardo Sandoval; +Cc: N: [-- Attachment #1: Type: text/plain, Size: 1790 bytes --] Dear Team Yocto Members, I continue compiling, and got : ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class ERROR: Failed to parse recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb How can I fix it ? regards, Riko On 14/08/17 23:56, Christopher Larson wrote: > The openembedded-core root isn’t a layer, openembedded-core/meta is. > > On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval > <leonardo.sandoval.gonzalez@linux.intel.com > <mailto:leonardo.sandoval.gonzalez@linux.intel.com>> wrote: > > On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: > > Dear Yocto Members, > > > > How can I find this file ? > > > this is a pretty general question. are you running bitbake from the > build directory? double check your conf/bblayers.conf and make sure > paths there are pointing correctly. > > > > > > == > > > > ERROR: Unable to parse > > /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file > > /home/bianchi/poky/openembedded-core/conf/layer.conf not found > > > > > > Thanks, > > > > Riko > > > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > https://lists.yoctoproject.org/listinfo/yocto > <https://lists.yoctoproject.org/listinfo/yocto> > > > > > -- > Christopher Larson > kergoth at gmail dot com > Founder - BitBake, OpenEmbedded, OpenZaurus > Senior Software Engineer, Mentor Graphics [-- Attachment #2: Type: text/html, Size: 3800 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-15 1:09 ` Riko @ 2017-08-15 14:12 ` Leonardo Sandoval 2017-08-15 14:11 ` Martin Jansa 0 siblings, 1 reply; 11+ messages in thread From: Leonardo Sandoval @ 2017-08-15 14:12 UTC (permalink / raw) To: Riko; +Cc: yocto On Tue, 2017-08-15 at 09:09 +0800, Riko wrote: > Dear Team Yocto Members, > > I continue compiling, and got : > > ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class > ERROR: Failed to parse > recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb > would be better if you start another thread with this issue. BTW, I just built a build-appliance without any change at local.conf and all went fine so you may have included something that you are not referring to (IMAGE_FILES?) > How can I fix it ? > > regards, > > Riko > > > > On 14/08/17 23:56, Christopher Larson wrote: > > > The openembedded-core root isn’t a layer, openembedded-core/meta is. > > > > On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval > > <leonardo.sandoval.gonzalez@linux.intel.com> wrote: > > On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: > > > Dear Yocto Members, > > > > > > How can I find this file ? > > > > > > this is a pretty general question. are you running bitbake > > from the > > build directory? double check your conf/bblayers.conf and > > make sure > > paths there are pointing correctly. > > > > > > > > > > == > > > > > > ERROR: Unable to parse > > > /home/bianchi/poky/openembedded-core/conf/layer.conf: > > [Errno 2] file > > > /home/bianchi/poky/openembedded-core/conf/layer.conf not > > found > > > > > > > > > Thanks, > > > > > > Riko > > > > > > > > > -- > > _______________________________________________ > > yocto mailing list > > yocto@yoctoproject.org > > https://lists.yoctoproject.org/listinfo/yocto > > > > > > > > > > > > -- > > Christopher Larson > > kergoth at gmail dot com > > Founder - BitBake, OpenEmbedded, OpenZaurus > > Senior Software Engineer, Mentor Graphics > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-15 14:12 ` Leonardo Sandoval @ 2017-08-15 14:11 ` Martin Jansa 2017-08-15 23:40 ` Riko Ho 0 siblings, 1 reply; 11+ messages in thread From: Martin Jansa @ 2017-08-15 14:11 UTC (permalink / raw) To: Leonardo Sandoval; +Cc: Riko, yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 3001 bytes --] But it's related to it, in this thread he added oe-core/meta in master branch to BBLAYERS in poky build (already including poky/meta) from pyro branch. That's why he is seeing 3 strange issues reported in couple threads already (and this is also 3rd time someone telling him that he shouldn't include oe-core meta twice and to use the same branch across all layers). On Tue, Aug 15, 2017 at 4:12 PM, Leonardo Sandoval < leonardo.sandoval.gonzalez@linux.intel.com> wrote: > On Tue, 2017-08-15 at 09:09 +0800, Riko wrote: > > Dear Team Yocto Members, > > > > I continue compiling, and got : > > > > ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ > build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES > entry 'wic.vmdk' - possibly invalid type name or missing support class > > ERROR: Failed to parse > > recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ > build-appliance-image_15.0.0.bb > > > > would be better if you start another thread with this issue. BTW, I just > built a build-appliance without any change at local.conf and all went > fine so you may have included something that you are not referring to > (IMAGE_FILES?) > > > > > How can I fix it ? > > > > regards, > > > > Riko > > > > > > > > On 14/08/17 23:56, Christopher Larson wrote: > > > > > The openembedded-core root isn’t a layer, openembedded-core/meta is. > > > > > > On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval > > > <leonardo.sandoval.gonzalez@linux.intel.com> wrote: > > > On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: > > > > Dear Yocto Members, > > > > > > > > How can I find this file ? > > > > > > > > > this is a pretty general question. are you running bitbake > > > from the > > > build directory? double check your conf/bblayers.conf and > > > make sure > > > paths there are pointing correctly. > > > > > > > > > > > > > > == > > > > > > > > ERROR: Unable to parse > > > > /home/bianchi/poky/openembedded-core/conf/layer.conf: > > > [Errno 2] file > > > > /home/bianchi/poky/openembedded-core/conf/layer.conf not > > > found > > > > > > > > > > > > Thanks, > > > > > > > > Riko > > > > > > > > > > > > > -- > > > _______________________________________________ > > > yocto mailing list > > > yocto@yoctoproject.org > > > https://lists.yoctoproject.org/listinfo/yocto > > > > > > > > > > > > > > > > > > -- > > > Christopher Larson > > > kergoth at gmail dot com > > > Founder - BitBake, OpenEmbedded, OpenZaurus > > > Senior Software Engineer, Mentor Graphics > > > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > [-- Attachment #2: Type: text/html, Size: 4686 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-15 14:11 ` Martin Jansa @ 2017-08-15 23:40 ` Riko Ho 2017-08-15 23:50 ` Martin Jansa 0 siblings, 1 reply; 11+ messages in thread From: Riko Ho @ 2017-08-15 23:40 UTC (permalink / raw) To: Martin Jansa; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 3380 bytes --] I see, so I must use all layers within the same branch. Could you tell me where I can download those layers in the sma branch? I didn't see the branch when I clone the layers. Regards, On Aug 15, 2017 10:11 PM, "Martin Jansa" <martin.jansa@gmail.com> wrote: > But it's related to it, in this thread he added oe-core/meta in master > branch to BBLAYERS in poky build (already including poky/meta) from pyro > branch. > > That's why he is seeing 3 strange issues reported in couple threads > already (and this is also 3rd time someone telling him that he shouldn't > include oe-core meta twice and to use the same branch across all layers). > > On Tue, Aug 15, 2017 at 4:12 PM, Leonardo Sandoval < > leonardo.sandoval.gonzalez@linux.intel.com> wrote: > >> On Tue, 2017-08-15 at 09:09 +0800, Riko wrote: >> > Dear Team Yocto Members, >> > >> > I continue compiling, and got : >> > >> > ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ >> build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES >> entry 'wic.vmdk' - possibly invalid type name or missing support class >> > ERROR: Failed to parse >> > recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ >> build-appliance-image_15.0.0.bb >> > >> >> would be better if you start another thread with this issue. BTW, I just >> built a build-appliance without any change at local.conf and all went >> fine so you may have included something that you are not referring to >> (IMAGE_FILES?) >> >> >> >> > How can I fix it ? >> > >> > regards, >> > >> > Riko >> > >> > >> > >> > On 14/08/17 23:56, Christopher Larson wrote: >> > >> > > The openembedded-core root isn’t a layer, openembedded-core/meta is. >> > > >> > > On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval >> > > <leonardo.sandoval.gonzalez@linux.intel.com> wrote: >> > > On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: >> > > > Dear Yocto Members, >> > > > >> > > > How can I find this file ? >> > > >> > > >> > > this is a pretty general question. are you running bitbake >> > > from the >> > > build directory? double check your conf/bblayers.conf and >> > > make sure >> > > paths there are pointing correctly. >> > > >> > > >> > > > >> > > > == >> > > > >> > > > ERROR: Unable to parse >> > > > /home/bianchi/poky/openembedded-core/conf/layer.conf: >> > > [Errno 2] file >> > > > /home/bianchi/poky/openembedded-core/conf/layer.conf not >> > > found >> > > > >> > > > >> > > > Thanks, >> > > > >> > > > Riko >> > > > >> > > >> > > >> > > -- >> > > _______________________________________________ >> > > yocto mailing list >> > > yocto@yoctoproject.org >> > > https://lists.yoctoproject.org/listinfo/yocto >> > > >> > > >> > > >> > > >> > > >> > > -- >> > > Christopher Larson >> > > kergoth at gmail dot com >> > > Founder - BitBake, OpenEmbedded, OpenZaurus >> > > Senior Software Engineer, Mentor Graphics >> > >> >> >> -- >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> > > [-- Attachment #2: Type: text/html, Size: 5269 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-15 23:40 ` Riko Ho @ 2017-08-15 23:50 ` Martin Jansa 2017-08-16 1:06 ` Riko 2017-08-16 1:38 ` Riko 0 siblings, 2 replies; 11+ messages in thread From: Martin Jansa @ 2017-08-15 23:50 UTC (permalink / raw) To: Riko Ho; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 3760 bytes --] On Wed, Aug 16, 2017 at 07:40:10AM +0800, Riko Ho wrote: > I see, so I must use all layers within the same branch. > Could you tell me where I can download those layers in the sma branch? > I didn't see the branch when I clone the layers. This might help you: https://git-scm.com/documentation > On Aug 15, 2017 10:11 PM, "Martin Jansa" <martin.jansa@gmail.com> wrote: > > > But it's related to it, in this thread he added oe-core/meta in master > > branch to BBLAYERS in poky build (already including poky/meta) from pyro > > branch. > > > > That's why he is seeing 3 strange issues reported in couple threads > > already (and this is also 3rd time someone telling him that he shouldn't > > include oe-core meta twice and to use the same branch across all layers). > > > > On Tue, Aug 15, 2017 at 4:12 PM, Leonardo Sandoval < > > leonardo.sandoval.gonzalez@linux.intel.com> wrote: > > > >> On Tue, 2017-08-15 at 09:09 +0800, Riko wrote: > >> > Dear Team Yocto Members, > >> > > >> > I continue compiling, and got : > >> > > >> > ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ > >> build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES > >> entry 'wic.vmdk' - possibly invalid type name or missing support class > >> > ERROR: Failed to parse > >> > recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ > >> build-appliance-image_15.0.0.bb > >> > > >> > >> would be better if you start another thread with this issue. BTW, I just > >> built a build-appliance without any change at local.conf and all went > >> fine so you may have included something that you are not referring to > >> (IMAGE_FILES?) > >> > >> > >> > >> > How can I fix it ? > >> > > >> > regards, > >> > > >> > Riko > >> > > >> > > >> > > >> > On 14/08/17 23:56, Christopher Larson wrote: > >> > > >> > > The openembedded-core root isn’t a layer, openembedded-core/meta is. > >> > > > >> > > On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval > >> > > <leonardo.sandoval.gonzalez@linux.intel.com> wrote: > >> > > On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: > >> > > > Dear Yocto Members, > >> > > > > >> > > > How can I find this file ? > >> > > > >> > > > >> > > this is a pretty general question. are you running bitbake > >> > > from the > >> > > build directory? double check your conf/bblayers.conf and > >> > > make sure > >> > > paths there are pointing correctly. > >> > > > >> > > > >> > > > > >> > > > == > >> > > > > >> > > > ERROR: Unable to parse > >> > > > /home/bianchi/poky/openembedded-core/conf/layer.conf: > >> > > [Errno 2] file > >> > > > /home/bianchi/poky/openembedded-core/conf/layer.conf not > >> > > found > >> > > > > >> > > > > >> > > > Thanks, > >> > > > > >> > > > Riko > >> > > > > >> > > > >> > > > >> > > -- > >> > > _______________________________________________ > >> > > yocto mailing list > >> > > yocto@yoctoproject.org > >> > > https://lists.yoctoproject.org/listinfo/yocto > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > -- > >> > > Christopher Larson > >> > > kergoth at gmail dot com > >> > > Founder - BitBake, OpenEmbedded, OpenZaurus > >> > > Senior Software Engineer, Mentor Graphics > >> > > >> > >> > >> -- > >> _______________________________________________ > >> yocto mailing list > >> yocto@yoctoproject.org > >> https://lists.yoctoproject.org/listinfo/yocto > >> > > > > -- Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 201 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-15 23:50 ` Martin Jansa @ 2017-08-16 1:06 ` Riko 2017-08-16 1:38 ` Riko 1 sibling, 0 replies; 11+ messages in thread From: Riko @ 2017-08-16 1:06 UTC (permalink / raw) To: Martin Jansa; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 3745 bytes --] This one : |git clone -b morty git://any layers ===> if I use morty as my branch ? correct me ? thanks | On 16/08/17 07:50, Martin Jansa wrote: > On Wed, Aug 16, 2017 at 07:40:10AM +0800, Riko Ho wrote: >> I see, so I must use all layers within the same branch. >> Could you tell me where I can download those layers in the sma branch? >> I didn't see the branch when I clone the layers. > This might help you: > https://git-scm.com/documentation > >> On Aug 15, 2017 10:11 PM, "Martin Jansa" <martin.jansa@gmail.com> wrote: >> >>> But it's related to it, in this thread he added oe-core/meta in master >>> branch to BBLAYERS in poky build (already including poky/meta) from pyro >>> branch. >>> >>> That's why he is seeing 3 strange issues reported in couple threads >>> already (and this is also 3rd time someone telling him that he shouldn't >>> include oe-core meta twice and to use the same branch across all layers). >>> >>> On Tue, Aug 15, 2017 at 4:12 PM, Leonardo Sandoval < >>> leonardo.sandoval.gonzalez@linux.intel.com> wrote: >>> >>>> On Tue, 2017-08-15 at 09:09 +0800, Riko wrote: >>>>> Dear Team Yocto Members, >>>>> >>>>> I continue compiling, and got : >>>>> >>>>> ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ >>>> build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES >>>> entry 'wic.vmdk' - possibly invalid type name or missing support class >>>>> ERROR: Failed to parse >>>>> recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ >>>> build-appliance-image_15.0.0.bb >>>> would be better if you start another thread with this issue. BTW, I just >>>> built a build-appliance without any change at local.conf and all went >>>> fine so you may have included something that you are not referring to >>>> (IMAGE_FILES?) >>>> >>>> >>>> >>>>> How can I fix it ? >>>>> >>>>> regards, >>>>> >>>>> Riko >>>>> >>>>> >>>>> >>>>> On 14/08/17 23:56, Christopher Larson wrote: >>>>> >>>>>> The openembedded-core root isn’t a layer, openembedded-core/meta is. >>>>>> >>>>>> On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval >>>>>> <leonardo.sandoval.gonzalez@linux.intel.com> wrote: >>>>>> On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: >>>>>> > Dear Yocto Members, >>>>>> > >>>>>> > How can I find this file ? >>>>>> >>>>>> >>>>>> this is a pretty general question. are you running bitbake >>>>>> from the >>>>>> build directory? double check your conf/bblayers.conf and >>>>>> make sure >>>>>> paths there are pointing correctly. >>>>>> >>>>>> >>>>>> > >>>>>> > == >>>>>> > >>>>>> > ERROR: Unable to parse >>>>>> > /home/bianchi/poky/openembedded-core/conf/layer.conf: >>>>>> [Errno 2] file >>>>>> > /home/bianchi/poky/openembedded-core/conf/layer.conf not >>>>>> found >>>>>> > >>>>>> > >>>>>> > Thanks, >>>>>> > >>>>>> > Riko >>>>>> > >>>>>> >>>>>> >>>>>> -- >>>>>> _______________________________________________ >>>>>> yocto mailing list >>>>>> yocto@yoctoproject.org >>>>>> https://lists.yoctoproject.org/listinfo/yocto >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Christopher Larson >>>>>> kergoth at gmail dot com >>>>>> Founder - BitBake, OpenEmbedded, OpenZaurus >>>>>> Senior Software Engineer, Mentor Graphics >>>> >>>> -- >>>> _______________________________________________ >>>> yocto mailing list >>>> yocto@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/yocto >>>> >>> [-- Attachment #2: Type: text/html, Size: 5412 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: layer.conf on openembedded-core ? 2017-08-15 23:50 ` Martin Jansa 2017-08-16 1:06 ` Riko @ 2017-08-16 1:38 ` Riko 1 sibling, 0 replies; 11+ messages in thread From: Riko @ 2017-08-16 1:38 UTC (permalink / raw) To: Martin Jansa; +Cc: yocto@yoctoproject.org so from this page https://layers.openembedded.org/layerindex/branch/pyro/layers/ for example I want to use 'pyro' branch : I will do #> git clone -b pyro git://git.openembedded.org/openembedded-core On 16/08/17 07:50, Martin Jansa wrote: > On Wed, Aug 16, 2017 at 07:40:10AM +0800, Riko Ho wrote: >> I see, so I must use all layers within the same branch. >> Could you tell me where I can download those layers in the sma branch? >> I didn't see the branch when I clone the layers. > This might help you: > https://git-scm.com/documentation > >> On Aug 15, 2017 10:11 PM, "Martin Jansa" <martin.jansa@gmail.com> wrote: >> >>> But it's related to it, in this thread he added oe-core/meta in master >>> branch to BBLAYERS in poky build (already including poky/meta) from pyro >>> branch. >>> >>> That's why he is seeing 3 strange issues reported in couple threads >>> already (and this is also 3rd time someone telling him that he shouldn't >>> include oe-core meta twice and to use the same branch across all layers). >>> >>> On Tue, Aug 15, 2017 at 4:12 PM, Leonardo Sandoval < >>> leonardo.sandoval.gonzalez@linux.intel.com> wrote: >>> >>>> On Tue, 2017-08-15 at 09:09 +0800, Riko wrote: >>>>> Dear Team Yocto Members, >>>>> >>>>> I continue compiling, and got : >>>>> >>>>> ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ >>>> build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES >>>> entry 'wic.vmdk' - possibly invalid type name or missing support class >>>>> ERROR: Failed to parse >>>>> recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ >>>> build-appliance-image_15.0.0.bb >>>> would be better if you start another thread with this issue. BTW, I just >>>> built a build-appliance without any change at local.conf and all went >>>> fine so you may have included something that you are not referring to >>>> (IMAGE_FILES?) >>>> >>>> >>>> >>>>> How can I fix it ? >>>>> >>>>> regards, >>>>> >>>>> Riko >>>>> >>>>> >>>>> >>>>> On 14/08/17 23:56, Christopher Larson wrote: >>>>> >>>>>> The openembedded-core root isn’t a layer, openembedded-core/meta is. >>>>>> >>>>>> On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval >>>>>> <leonardo.sandoval.gonzalez@linux.intel.com> wrote: >>>>>> On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: >>>>>> > Dear Yocto Members, >>>>>> > >>>>>> > How can I find this file ? >>>>>> >>>>>> >>>>>> this is a pretty general question. are you running bitbake >>>>>> from the >>>>>> build directory? double check your conf/bblayers.conf and >>>>>> make sure >>>>>> paths there are pointing correctly. >>>>>> >>>>>> >>>>>> > >>>>>> > == >>>>>> > >>>>>> > ERROR: Unable to parse >>>>>> > /home/bianchi/poky/openembedded-core/conf/layer.conf: >>>>>> [Errno 2] file >>>>>> > /home/bianchi/poky/openembedded-core/conf/layer.conf not >>>>>> found >>>>>> > >>>>>> > >>>>>> > Thanks, >>>>>> > >>>>>> > Riko >>>>>> > >>>>>> >>>>>> >>>>>> -- >>>>>> _______________________________________________ >>>>>> yocto mailing list >>>>>> yocto@yoctoproject.org >>>>>> https://lists.yoctoproject.org/listinfo/yocto >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Christopher Larson >>>>>> kergoth at gmail dot com >>>>>> Founder - BitBake, OpenEmbedded, OpenZaurus >>>>>> Senior Software Engineer, Mentor Graphics >>>> >>>> -- >>>> _______________________________________________ >>>> yocto mailing list >>>> yocto@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/yocto >>>> >>> ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2017-08-16 1:38 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-08-14 7:11 layer.conf on openembedded-core ? Riko 2017-08-14 15:49 ` Leonardo Sandoval 2017-08-14 15:56 ` Christopher Larson 2017-08-15 0:55 ` Riko 2017-08-15 1:09 ` Riko 2017-08-15 14:12 ` Leonardo Sandoval 2017-08-15 14:11 ` Martin Jansa 2017-08-15 23:40 ` Riko Ho 2017-08-15 23:50 ` Martin Jansa 2017-08-16 1:06 ` Riko 2017-08-16 1:38 ` Riko
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.