From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: linux-iio@vger.kernel.org, linus.walleij@linaro.org,
lorenzo.bianconi@st.com, devicetree@vger.kernel.org
Subject: Re: [PATCH 4/5] iio: accel: add support to LIS2DW12
Date: Thu, 17 Aug 2017 16:05:51 +0100 [thread overview]
Message-ID: <20170817160551.2b22c1d5@archlinux> (raw)
In-Reply-To: <20170816191316.11469-5-lorenzo.bianconi@st.com>
On Wed, 16 Aug 2017 21:13:15 +0200
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:
> add support to STMicroelectronics LIS2DW12 accelerometer in
> st_accel framework
>
> http://www.st.com/resource/en/datasheet/lis2dw12.pdf
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Looks good to me from a quick glance (I haven't checked against the data
sheet). Might take a closer look on v2.
Jonathan
> ---
> drivers/iio/accel/st_accel.h | 2 +
> drivers/iio/accel/st_accel_core.c | 79 +++++++++++++++++++++++++++++++++++++++
> drivers/iio/accel/st_accel_i2c.c | 5 +++
> drivers/iio/accel/st_accel_spi.c | 5 +++
> 4 files changed, 91 insertions(+)
>
> diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
> index 0fe521609a3a..2ed0f60418c0 100644
> --- a/drivers/iio/accel/st_accel.h
> +++ b/drivers/iio/accel/st_accel.h
> @@ -32,6 +32,7 @@ enum st_accel_type {
> H3LIS331DL,
> LIS331DL,
> LIS3LV02DL,
> + LIS2DW12,
> ST_ACCEL_MAX,
> };
>
> @@ -52,6 +53,7 @@ enum st_accel_type {
> #define LIS2DH12_ACCEL_DEV_NAME "lis2dh12_accel"
> #define LIS3L02DQ_ACCEL_DEV_NAME "lis3l02dq"
> #define LNG2DM_ACCEL_DEV_NAME "lng2dm"
> +#define LIS2DW12_ACCEL_DEV_NAME "lis2dw12"
>
> /**
> * struct st_sensors_platform_data - default accel platform data
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index 4d9190625630..42ada20daca0 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -692,6 +692,85 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .multi_read_bit = true,
> .bootime = 2,
> },
> + {
> + .wai = 0x44,
> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> + .sensors_supported = {
> + [0] = LIS2DW12_ACCEL_DEV_NAME,
> + },
> + .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> + .odr = {
> + .addr = 0x20,
> + .mask = 0xf0,
> + .odr_avl = {
> + { .hz = 1, .value = 0x01, },
> + { .hz = 12, .value = 0x02, },
> + { .hz = 25, .value = 0x03, },
> + { .hz = 50, .value = 0x04, },
> + { .hz = 100, .value = 0x05, },
> + { .hz = 200, .value = 0x06, },
> + },
> + },
> + .pw = {
> + .addr = 0x20,
> + .mask = 0xf0,
> + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> + },
> + .fs = {
> + .addr = 0x25,
> + .mask = 0x30,
> + .fs_avl = {
> + [0] = {
> + .num = ST_ACCEL_FS_AVL_2G,
> + .value = 0x00,
> + .gain = IIO_G_TO_M_S_2(976),
> + },
> + [1] = {
> + .num = ST_ACCEL_FS_AVL_4G,
> + .value = 0x01,
> + .gain = IIO_G_TO_M_S_2(1952),
> + },
> + [2] = {
> + .num = ST_ACCEL_FS_AVL_8G,
> + .value = 0x02,
> + .gain = IIO_G_TO_M_S_2(3904),
> + },
> + [3] = {
> + .num = ST_ACCEL_FS_AVL_16G,
> + .value = 0x03,
> + .gain = IIO_G_TO_M_S_2(7808),
> + },
> + },
> + },
> + .bdu = {
> + .addr = 0x21,
> + .mask = 0x08,
> + },
> + .drdy_irq = {
> + .int1 = {
> + .addr = 0x23,
> + .mask = 0x01,
> + },
> + .int2 = {
> + .addr = 0x24,
> + .mask = 0x01,
> + },
> + .addr_ihl = 0x22,
> + .mask_ihl = 0x08,
> + .addr_od = 0x22,
> + .mask_od = 0x20,
> + .stat_drdy = {
> + .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
> + .mask = 0x01,
> + },
> + },
> + .sim = {
> + .addr = 0x21,
> + .value = BIT(0),
> + },
> + .multi_read_bit = false,
> + .bootime = 2,
> + },
> };
>
> static int st_accel_read_raw(struct iio_dev *indio_dev,
> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> index 18cafb9f2468..363429b5686c 100644
> --- a/drivers/iio/accel/st_accel_i2c.c
> +++ b/drivers/iio/accel/st_accel_i2c.c
> @@ -94,6 +94,10 @@ static const struct of_device_id st_accel_of_match[] = {
> .compatible = "st,lng2dm-accel",
> .data = LNG2DM_ACCEL_DEV_NAME,
> },
> + {
> + .compatible = "st,lis2dw12",
> + .data = LIS2DW12_ACCEL_DEV_NAME,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> @@ -129,6 +133,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
> { H3LIS331DL_ACCEL_DEV_NAME, H3LIS331DL },
> { LIS331DL_ACCEL_DEV_NAME, LIS331DL },
> { LIS3LV02DL_ACCEL_DEV_NAME, LIS3LV02DL },
> + { LIS2DW12_ACCEL_DEV_NAME, LIS2DW12 },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> index 915fa49085f7..7692da49e59f 100644
> --- a/drivers/iio/accel/st_accel_spi.c
> +++ b/drivers/iio/accel/st_accel_spi.c
> @@ -82,6 +82,10 @@ static const struct of_device_id st_accel_of_match[] = {
> .compatible = "st,lis331dl-accel",
> .data = LIS331DL_ACCEL_DEV_NAME,
> },
> + {
> + .compatible = "st,lis2dw12",
> + .data = LIS2DW12_ACCEL_DEV_NAME,
> + },
> {}
> };
> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> @@ -133,6 +137,7 @@ static const struct spi_device_id st_accel_id_table[] = {
> { H3LIS331DL_ACCEL_DEV_NAME },
> { LIS331DL_ACCEL_DEV_NAME },
> { LIS3LV02DL_ACCEL_DEV_NAME },
> + { LIS2DW12_ACCEL_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(spi, st_accel_id_table);
WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Lorenzo Bianconi
<lorenzo.bianconi83-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
lorenzo.bianconi-qxv4g6HH51o@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 4/5] iio: accel: add support to LIS2DW12
Date: Thu, 17 Aug 2017 16:05:51 +0100 [thread overview]
Message-ID: <20170817160551.2b22c1d5@archlinux> (raw)
In-Reply-To: <20170816191316.11469-5-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>
On Wed, 16 Aug 2017 21:13:15 +0200
Lorenzo Bianconi <lorenzo.bianconi83-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> add support to STMicroelectronics LIS2DW12 accelerometer in
> st_accel framework
>
> http://www.st.com/resource/en/datasheet/lis2dw12.pdf
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>
Looks good to me from a quick glance (I haven't checked against the data
sheet). Might take a closer look on v2.
Jonathan
> ---
> drivers/iio/accel/st_accel.h | 2 +
> drivers/iio/accel/st_accel_core.c | 79 +++++++++++++++++++++++++++++++++++++++
> drivers/iio/accel/st_accel_i2c.c | 5 +++
> drivers/iio/accel/st_accel_spi.c | 5 +++
> 4 files changed, 91 insertions(+)
>
> diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
> index 0fe521609a3a..2ed0f60418c0 100644
> --- a/drivers/iio/accel/st_accel.h
> +++ b/drivers/iio/accel/st_accel.h
> @@ -32,6 +32,7 @@ enum st_accel_type {
> H3LIS331DL,
> LIS331DL,
> LIS3LV02DL,
> + LIS2DW12,
> ST_ACCEL_MAX,
> };
>
> @@ -52,6 +53,7 @@ enum st_accel_type {
> #define LIS2DH12_ACCEL_DEV_NAME "lis2dh12_accel"
> #define LIS3L02DQ_ACCEL_DEV_NAME "lis3l02dq"
> #define LNG2DM_ACCEL_DEV_NAME "lng2dm"
> +#define LIS2DW12_ACCEL_DEV_NAME "lis2dw12"
>
> /**
> * struct st_sensors_platform_data - default accel platform data
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index 4d9190625630..42ada20daca0 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -692,6 +692,85 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .multi_read_bit = true,
> .bootime = 2,
> },
> + {
> + .wai = 0x44,
> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> + .sensors_supported = {
> + [0] = LIS2DW12_ACCEL_DEV_NAME,
> + },
> + .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> + .odr = {
> + .addr = 0x20,
> + .mask = 0xf0,
> + .odr_avl = {
> + { .hz = 1, .value = 0x01, },
> + { .hz = 12, .value = 0x02, },
> + { .hz = 25, .value = 0x03, },
> + { .hz = 50, .value = 0x04, },
> + { .hz = 100, .value = 0x05, },
> + { .hz = 200, .value = 0x06, },
> + },
> + },
> + .pw = {
> + .addr = 0x20,
> + .mask = 0xf0,
> + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> + },
> + .fs = {
> + .addr = 0x25,
> + .mask = 0x30,
> + .fs_avl = {
> + [0] = {
> + .num = ST_ACCEL_FS_AVL_2G,
> + .value = 0x00,
> + .gain = IIO_G_TO_M_S_2(976),
> + },
> + [1] = {
> + .num = ST_ACCEL_FS_AVL_4G,
> + .value = 0x01,
> + .gain = IIO_G_TO_M_S_2(1952),
> + },
> + [2] = {
> + .num = ST_ACCEL_FS_AVL_8G,
> + .value = 0x02,
> + .gain = IIO_G_TO_M_S_2(3904),
> + },
> + [3] = {
> + .num = ST_ACCEL_FS_AVL_16G,
> + .value = 0x03,
> + .gain = IIO_G_TO_M_S_2(7808),
> + },
> + },
> + },
> + .bdu = {
> + .addr = 0x21,
> + .mask = 0x08,
> + },
> + .drdy_irq = {
> + .int1 = {
> + .addr = 0x23,
> + .mask = 0x01,
> + },
> + .int2 = {
> + .addr = 0x24,
> + .mask = 0x01,
> + },
> + .addr_ihl = 0x22,
> + .mask_ihl = 0x08,
> + .addr_od = 0x22,
> + .mask_od = 0x20,
> + .stat_drdy = {
> + .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
> + .mask = 0x01,
> + },
> + },
> + .sim = {
> + .addr = 0x21,
> + .value = BIT(0),
> + },
> + .multi_read_bit = false,
> + .bootime = 2,
> + },
> };
>
> static int st_accel_read_raw(struct iio_dev *indio_dev,
> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> index 18cafb9f2468..363429b5686c 100644
> --- a/drivers/iio/accel/st_accel_i2c.c
> +++ b/drivers/iio/accel/st_accel_i2c.c
> @@ -94,6 +94,10 @@ static const struct of_device_id st_accel_of_match[] = {
> .compatible = "st,lng2dm-accel",
> .data = LNG2DM_ACCEL_DEV_NAME,
> },
> + {
> + .compatible = "st,lis2dw12",
> + .data = LIS2DW12_ACCEL_DEV_NAME,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> @@ -129,6 +133,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
> { H3LIS331DL_ACCEL_DEV_NAME, H3LIS331DL },
> { LIS331DL_ACCEL_DEV_NAME, LIS331DL },
> { LIS3LV02DL_ACCEL_DEV_NAME, LIS3LV02DL },
> + { LIS2DW12_ACCEL_DEV_NAME, LIS2DW12 },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> index 915fa49085f7..7692da49e59f 100644
> --- a/drivers/iio/accel/st_accel_spi.c
> +++ b/drivers/iio/accel/st_accel_spi.c
> @@ -82,6 +82,10 @@ static const struct of_device_id st_accel_of_match[] = {
> .compatible = "st,lis331dl-accel",
> .data = LIS331DL_ACCEL_DEV_NAME,
> },
> + {
> + .compatible = "st,lis2dw12",
> + .data = LIS2DW12_ACCEL_DEV_NAME,
> + },
> {}
> };
> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> @@ -133,6 +137,7 @@ static const struct spi_device_id st_accel_id_table[] = {
> { H3LIS331DL_ACCEL_DEV_NAME },
> { LIS331DL_ACCEL_DEV_NAME },
> { LIS3LV02DL_ACCEL_DEV_NAME },
> + { LIS2DW12_ACCEL_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(spi, st_accel_id_table);
next prev parent reply other threads:[~2017-08-17 15:05 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-16 19:13 [PATCH 0/5] Add support to LIS2DW12 accel sensor Lorenzo Bianconi
2017-08-16 19:13 ` Lorenzo Bianconi
2017-08-16 19:13 ` [PATCH 1/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones Lorenzo Bianconi
2017-08-16 19:13 ` Lorenzo Bianconi
2017-08-17 14:59 ` Jonathan Cameron
2017-08-17 14:59 ` Jonathan Cameron
2017-08-17 15:09 ` Lorenzo Bianconi
2017-08-17 15:09 ` Lorenzo Bianconi
2017-08-16 19:13 ` [PATCH 2/5] iio: st_sensors: do not always write enable_axis register Lorenzo Bianconi
2017-08-16 19:13 ` Lorenzo Bianconi
2017-08-17 15:00 ` Jonathan Cameron
2017-08-17 15:00 ` Jonathan Cameron
2017-08-16 19:13 ` [PATCH 3/5] iio: st_sensors: add register mask for status register Lorenzo Bianconi
2017-08-16 19:13 ` Lorenzo Bianconi
2017-08-17 15:04 ` Jonathan Cameron
2017-08-17 15:04 ` Jonathan Cameron
2017-08-16 19:13 ` [PATCH 4/5] iio: accel: add support to LIS2DW12 Lorenzo Bianconi
2017-08-16 19:13 ` Lorenzo Bianconi
2017-08-17 15:05 ` Jonathan Cameron [this message]
2017-08-17 15:05 ` Jonathan Cameron
2017-08-16 19:13 ` [PATCH 5/5] dt-bindings: iio: accel: add LIS2DW12 sensor device binding Lorenzo Bianconi
2017-08-16 19:13 ` Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170817160551.2b22c1d5@archlinux \
--to=jic23@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo.bianconi83@gmail.com \
--cc=lorenzo.bianconi@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.