All of lore.kernel.org
 help / color / mirror / Atom feed
From: clabbe.montjoie@gmail.com (Corentin Labbe)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/6] net: stmmac: Detect PHY location with phy-is-integrated
Date: Fri, 18 Aug 2017 11:24:27 +0200	[thread overview]
Message-ID: <20170818092427.GA7425@Red> (raw)
In-Reply-To: <20170817075149.16178-1-clabbe.montjoie@gmail.com>

On Thu, Aug 17, 2017 at 09:51:43AM +0200, Corentin Labbe wrote:
> Hello
> 
> The current way to find if the phy is internal is to compare DT phy-mode
> and emac_variant/internal_phy.
> But it will negate a possible future SoC where an external PHY use the
> same phy mode than the integrated one.
> 
> This patchs series adds a new way to find if the PHY is integrated, via
> the phy-is-integrated DT property.
> 
> Since it exists both integrated and external ethernet-phy at 1, they are merged in
> the final DTB and so share all properties.
> For avoiding this, the phy-is-integrated is added only to board DT.
> 
> The first five patchs should go via the sunxi tree.
> the last one should go via the net tree.
> Note that this serie will need backporting the patch
> "Documentation: net: phy: Add phy-is-integrated binding" which is in net-next
> 
> Thanks
> Regards
> 
> Changes since v1:
> - Dropped phy-is-integrated documentation patch since another same patch was already merged
> - Moved phy-is-integrated from SoC dtsi to final board DT.
> 
> Corentin Labbe (6):
>   ARM: sun8i: orangepipc: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: beelink-x2: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: nanopi-neo: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: orangepi-2: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: orangepi-one: Set phy-is-integrated to the internal phy
>     node
>   net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated
> 
>  arch/arm/boot/dts/sun8i-h3-beelink-x2.dts         |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts         |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-2.dts         |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-one.dts       |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts        |  4 ++++
>  drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 16 ++++++++--------
>  6 files changed, 28 insertions(+), 8 deletions(-)
> 
> -- 
> 2.13.0
> 

Hello

Self NACK, the comment from Rob on previous series is pertinent.
I will send a v3 which use a mdio-mux for solving all problems.

Regards

WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
	maxime.ripard@free-electrons.com, wens@csie.org,
	peppe.cavallaro@st.com, alexandre.torgue@st.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH v2 0/6] net: stmmac: Detect PHY location with phy-is-integrated
Date: Fri, 18 Aug 2017 11:24:27 +0200	[thread overview]
Message-ID: <20170818092427.GA7425@Red> (raw)
In-Reply-To: <20170817075149.16178-1-clabbe.montjoie@gmail.com>

On Thu, Aug 17, 2017 at 09:51:43AM +0200, Corentin Labbe wrote:
> Hello
> 
> The current way to find if the phy is internal is to compare DT phy-mode
> and emac_variant/internal_phy.
> But it will negate a possible future SoC where an external PHY use the
> same phy mode than the integrated one.
> 
> This patchs series adds a new way to find if the PHY is integrated, via
> the phy-is-integrated DT property.
> 
> Since it exists both integrated and external ethernet-phy@1, they are merged in
> the final DTB and so share all properties.
> For avoiding this, the phy-is-integrated is added only to board DT.
> 
> The first five patchs should go via the sunxi tree.
> the last one should go via the net tree.
> Note that this serie will need backporting the patch
> "Documentation: net: phy: Add phy-is-integrated binding" which is in net-next
> 
> Thanks
> Regards
> 
> Changes since v1:
> - Dropped phy-is-integrated documentation patch since another same patch was already merged
> - Moved phy-is-integrated from SoC dtsi to final board DT.
> 
> Corentin Labbe (6):
>   ARM: sun8i: orangepipc: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: beelink-x2: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: nanopi-neo: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: orangepi-2: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: orangepi-one: Set phy-is-integrated to the internal phy
>     node
>   net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated
> 
>  arch/arm/boot/dts/sun8i-h3-beelink-x2.dts         |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts         |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-2.dts         |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-one.dts       |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts        |  4 ++++
>  drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 16 ++++++++--------
>  6 files changed, 28 insertions(+), 8 deletions(-)
> 
> -- 
> 2.13.0
> 

Hello

Self NACK, the comment from Rob on previous series is pertinent.
I will send a v3 which use a mdio-mux for solving all problems.

Regards

  parent reply	other threads:[~2017-08-18  9:24 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-17  7:51 [PATCH v2 0/6] net: stmmac: Detect PHY location with phy-is-integrated Corentin Labbe
2017-08-17  7:51 ` Corentin Labbe
2017-08-17  7:51 ` [PATCH v2 1/6] ARM: sun8i: orangepipc: Set phy-is-integrated to the internal phy node Corentin Labbe
2017-08-17  7:51   ` Corentin Labbe
2017-08-17  7:51 ` [PATCH v2 2/6] ARM: sun8i: beelink-x2: " Corentin Labbe
2017-08-17  7:51   ` Corentin Labbe
2017-08-17  7:51   ` Corentin Labbe
2017-08-17  7:51 ` [PATCH v2 3/6] ARM: sun8i: nanopi-neo: " Corentin Labbe
2017-08-17  7:51   ` Corentin Labbe
2017-08-17  7:51   ` Corentin Labbe
2017-08-17  7:51 ` [PATCH v2 4/6] ARM: sun8i: orangepi-2: " Corentin Labbe
2017-08-17  7:51   ` Corentin Labbe
2017-08-17  7:51 ` [PATCH v2 5/6] ARM: sun8i: orangepi-one: " Corentin Labbe
2017-08-17  7:51   ` Corentin Labbe
2017-08-17  7:51   ` Corentin Labbe
2017-08-17  7:51 ` [PATCH v2 6/6] net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated Corentin Labbe
2017-08-17  7:51   ` Corentin Labbe
2017-08-18  9:24 ` Corentin Labbe [this message]
2017-08-18  9:24   ` [PATCH v2 0/6] net: stmmac: Detect PHY location with phy-is-integrated Corentin Labbe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170818092427.GA7425@Red \
    --to=clabbe.montjoie@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.