Re: [PATCH v2 3/3] ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC

[Mika Westerberg <mika.westerberg@linux.intel.com>]

On Thu, Aug 24, 2017 at 10:11:41AM +0200, Takashi Iwai wrote:
> This patch adds the opregion driver for Dollar Cove TI PMIC on Intel
> Cherry Trail devices.  The patch is based on the original work by
> Intel, found at:
>       https://github.com/01org/ProductionKernelQuilts
> with many cleanups and rewrites.
> 
> The driver is currently provided only as built-in to follow other
> PMIC opregion drivers convention.
> 
> The re-enumeration of devices at probe is required for fixing the
> issues on HP x2 210 G2.  See bug#195689.
> 
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195689
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> ---
> v1->v2:
> * get_raw_temp cleanup in opregion driver, mention about register
>   endianess
> 
>  drivers/acpi/Kconfig                 |   6 ++
>  drivers/acpi/Makefile                |   1 +
>  drivers/acpi/pmic/intel_pmic_dc_ti.c | 139 +++++++++++++++++++++++++++++++++++
>  3 files changed, 146 insertions(+)
>  create mode 100644 drivers/acpi/pmic/intel_pmic_dc_ti.c
> 
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 1ce52f84dc23..9da8dcefde7b 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -521,6 +521,12 @@ config CHT_WC_PMIC_OPREGION
>  	help
>  	  This config adds ACPI operation region support for CHT Whiskey Cove PMIC.
>  
> +config DC_TI_PMIC_OPREGION
> +	bool "ACPI operation region support for Dollar Cove TI PMIC"
> +	depends on INTEL_SOC_PMIC_DC_TI
> +	help
> +	  This config adds ACPI operation region support for Dollar Cove TI PMIC.
> +
>  endif
>  
>  config ACPI_CONFIGFS
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index b1aacfc62b1f..0a9008b971af 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -103,6 +103,7 @@ obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
>  obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
>  obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o
>  obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o
> +obj-$(CONFIG_DC_TI_PMIC_OPREGION) += pmic/intel_pmic_dc_ti.o
>  
>  obj-$(CONFIG_ACPI_CONFIGFS)	+= acpi_configfs.o
>  
> diff --git a/drivers/acpi/pmic/intel_pmic_dc_ti.c b/drivers/acpi/pmic/intel_pmic_dc_ti.c
> new file mode 100644
> index 000000000000..a2be1270eeeb
> --- /dev/null
> +++ b/drivers/acpi/pmic/intel_pmic_dc_ti.c
> @@ -0,0 +1,139 @@
> +/*
> + * Dollar Cove TI PMIC operation region driver
> + * Copyright (C) 2014 Intel Corporation. All rights reserved.
> + *
> + * Rewritten and cleaned up
> + * Copyright (C) 2017 Takashi Iwai <tiwai@suse.de>
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/init.h>
> +#include <linux/mfd/intel_soc_pmic.h>
> +#include <linux/platform_device.h>
> +#include "intel_pmic.h"
> +
> +/* registers stored in 16bit BE (high:low, total 10bit) */
> +#define DC_TI_VBAT	0x54
> +#define DC_TI_DIETEMP	0x56
> +#define DC_TI_BPTHERM	0x58
> +#define DC_TI_GPADC	0x5a
> +
> +static struct pmic_table dc_ti_power_table[] = {

const?

> +	{ .address = 0x00, .reg = 0x41 },
> +	{ .address = 0x04, .reg = 0x42 },
> +	{ .address = 0x08, .reg = 0x43 },
> +	{ .address = 0x0c, .reg = 0x45 },
> +	{ .address = 0x10, .reg = 0x46 },
> +	{ .address = 0x14, .reg = 0x47 },
> +	{ .address = 0x18, .reg = 0x48 },
> +	{ .address = 0x1c, .reg = 0x49 },
> +	{ .address = 0x20, .reg = 0x4a },
> +	{ .address = 0x24, .reg = 0x4b },
> +	{ .address = 0x28, .reg = 0x4c },
> +	{ .address = 0x2c, .reg = 0x4d },
> +	{ .address = 0x30, .reg = 0x4e },
> +};
> +
> +static struct pmic_table dc_ti_thermal_table[] = {

const?

> +	{
> +		.address = 0x00,
> +		.reg = DC_TI_GPADC
> +	},
> +	{
> +		.address = 0x0c,
> +		.reg = DC_TI_GPADC
> +	},
> +	/* TMP2 -> SYSTEMP */
> +	{
> +		.address = 0x18,
> +		.reg = DC_TI_GPADC
> +	},
> +	/* TMP3 -> BPTHERM */
> +	{
> +		.address = 0x24,
> +		.reg = DC_TI_BPTHERM
> +	},
> +	{
> +		.address = 0x30,
> +		.reg = DC_TI_GPADC
> +	},
> +	/* TMP5 -> DIETEMP */
> +	{
> +		.address = 0x3c,
> +		.reg = DC_TI_DIETEMP
> +	},
> +};
> +
> +static int dc_ti_pmic_get_power(struct regmap *regmap, int reg, int bit,
> +				u64 *value)
> +{
> +	int data;
> +
> +	if (regmap_read(regmap, reg, &data))
> +		return -EIO;
> +
> +	*value = data & 1;
> +	return 0;
> +}
> +
> +static int dc_ti_pmic_update_power(struct regmap *regmap, int reg, int bit,
> +				   bool on)
> +{
> +	return regmap_update_bits(regmap, reg, 1, on);
> +}
> +
> +static int dc_ti_pmic_get_raw_temp(struct regmap *regmap, int reg)
> +{
> +	u8 buf[2];
> +	unsigned int val;
> +
> +	if (regmap_bulk_read(regmap, reg, buf, 2))
> +		return -EIO;
> +
> +	/* stored in big-endian */
> +	val = buf[0] & 0x03;
> +	return (val << 8) | buf[1];
> +}
> +
> +static struct intel_pmic_opregion_data dc_ti_pmic_opregion_data = {

const?

> +	.get_power = dc_ti_pmic_get_power,
> +	.update_power = dc_ti_pmic_update_power,
> +	.get_raw_temp = dc_ti_pmic_get_raw_temp,
> +	.power_table = dc_ti_power_table,
> +	.power_table_count = ARRAY_SIZE(dc_ti_power_table),
> +	.thermal_table = dc_ti_thermal_table,
> +	.thermal_table_count = ARRAY_SIZE(dc_ti_thermal_table),
> +};
> +
> +static int dc_ti_pmic_opregion_probe(struct platform_device *pdev)
> +{
> +	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
> +	int err;
> +
> +	err = intel_pmic_install_opregion_handler(&pdev->dev,
> +			ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
> +			&dc_ti_pmic_opregion_data);
> +	if (err < 0)
> +		return err;
> +
> +	/* Re-enumerate devices depending on PMIC */
> +	acpi_walk_dep_device_list(ACPI_HANDLE(pdev->dev.parent));
> +	return 0;
> +}
> +
> +static struct platform_device_id dc_ti_pmic_opregion_id_table[] = {

const?

Regardless of the above,

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>