[PATCH RESEND 0/2] Allwinner V3s DMA support

[PATCH RESEND 0/2] Allwinner V3s DMA support

[Icenowy Zheng]

This is a dedicated patchset of Allwinner V3s DMA support, which used
to be part of the audio codec support patchset.

It's a derivation of the DMA part of v3 of the codec patchset.

Icenowy Zheng (2):
  dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk
  dmaengine: sun6i: support V3s SoC variant

 .../devicetree/bindings/dma/sun6i-dma.txt          |  1 +
 drivers/dma/sun6i-dma.c                            | 33 +++++++++++++++++-----
 2 files changed, 27 insertions(+), 7 deletions(-)

-- 
2.13.5

[PATCH RESEND 0/2] Allwinner V3s DMA support

[Icenowy Zheng]

This is a dedicated patchset of Allwinner V3s DMA support, which used
to be part of the audio codec support patchset.

It's a derivation of the DMA part of v3 of the codec patchset.

Icenowy Zheng (2):
  dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk
  dmaengine: sun6i: support V3s SoC variant

 .../devicetree/bindings/dma/sun6i-dma.txt          |  1 +
 drivers/dma/sun6i-dma.c                            | 33 +++++++++++++++++-----
 2 files changed, 27 insertions(+), 7 deletions(-)

-- 
2.13.5

[PATCH RESEND 0/2] Allwinner V3s DMA support

[Icenowy Zheng]

This is a dedicated patchset of Allwinner V3s DMA support, which used
to be part of the audio codec support patchset.

It's a derivation of the DMA part of v3 of the codec patchset.

Icenowy Zheng (2):
  dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk
  dmaengine: sun6i: support V3s SoC variant

 .../devicetree/bindings/dma/sun6i-dma.txt          |  1 +
 drivers/dma/sun6i-dma.c                            | 33 +++++++++++++++++-----
 2 files changed, 27 insertions(+), 7 deletions(-)

-- 
2.13.5

[PATCH RESEND 1/2] dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk

[Icenowy Zheng]

From: Icenowy Zheng <icenowy@aosc.xyz>

Originally we enable a special gate bit when the compatible indicates
A23/33.

But according to BSP sources and user manuals, more SoCs will need this
gate bit.

So make it a common quirk configured in the config struct.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/dma/sun6i-dma.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index a2358780ab2c..252b59c1d1d5 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -101,6 +101,17 @@ struct sun6i_dma_config {
 	u32 nr_max_channels;
 	u32 nr_max_requests;
 	u32 nr_max_vchans;
+	/*
+	 * In the datasheets/user manuals of newer Allwinner SoCs, a special
+	 * bit (bit 2 at register 0x20) is present.
+	 * It's named "DMA MCLK interface circuit auto gating bit" in the
+	 * documents, and the footnote of this register says that this bit
+	 * should be set up when initializing the DMA controller.
+	 * Allwinner A23/A33 user manuals do not have this bit documented,
+	 * however these SoCs really have and need this bit, as seen in the
+	 * BSP kernel source code.
+	 */
+	bool gate_needed;
 };
 
 /*
@@ -1009,6 +1020,7 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
 	.nr_max_channels = 8,
 	.nr_max_requests = 24,
 	.nr_max_vchans   = 37,
+	.gate_needed	 = true,
 };
 
 static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
@@ -1174,13 +1186,7 @@ static int sun6i_dma_probe(struct platform_device *pdev)
 		goto err_dma_unregister;
 	}
 
-	/*
-	 * sun8i variant requires us to toggle a dma gating register,
-	 * as seen in Allwinner's SDK. This register is not documented
-	 * in the A23 user manual.
-	 */
-	if (of_device_is_compatible(pdev->dev.of_node,
-				    "allwinner,sun8i-a23-dma"))
+	if (sdc->cfg->gate_needed)
 		writel(SUN8I_DMA_GATE_ENABLE, sdc->base + SUN8I_DMA_GATE);
 
 	return 0;
-- 
2.13.5

[PATCH RESEND 1/2] dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk

[Icenowy Zheng]

From: Icenowy Zheng <icenowy@aosc.xyz>

Originally we enable a special gate bit when the compatible indicates
A23/33.

But according to BSP sources and user manuals, more SoCs will need this
gate bit.

So make it a common quirk configured in the config struct.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/dma/sun6i-dma.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index a2358780ab2c..252b59c1d1d5 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -101,6 +101,17 @@ struct sun6i_dma_config {
 	u32 nr_max_channels;
 	u32 nr_max_requests;
 	u32 nr_max_vchans;
+	/*
+	 * In the datasheets/user manuals of newer Allwinner SoCs, a special
+	 * bit (bit 2 at register 0x20) is present.
+	 * It's named "DMA MCLK interface circuit auto gating bit" in the
+	 * documents, and the footnote of this register says that this bit
+	 * should be set up when initializing the DMA controller.
+	 * Allwinner A23/A33 user manuals do not have this bit documented,
+	 * however these SoCs really have and need this bit, as seen in the
+	 * BSP kernel source code.
+	 */
+	bool gate_needed;
 };
 
 /*
@@ -1009,6 +1020,7 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
 	.nr_max_channels = 8,
 	.nr_max_requests = 24,
 	.nr_max_vchans   = 37,
+	.gate_needed	 = true,
 };
 
 static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
@@ -1174,13 +1186,7 @@ static int sun6i_dma_probe(struct platform_device *pdev)
 		goto err_dma_unregister;
 	}
 
-	/*
-	 * sun8i variant requires us to toggle a dma gating register,
-	 * as seen in Allwinner's SDK. This register is not documented
-	 * in the A23 user manual.
-	 */
-	if (of_device_is_compatible(pdev->dev.of_node,
-				    "allwinner,sun8i-a23-dma"))
+	if (sdc->cfg->gate_needed)
 		writel(SUN8I_DMA_GATE_ENABLE, sdc->base + SUN8I_DMA_GATE);
 
 	return 0;
-- 
2.13.5

[PATCH RESEND 1/2] dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk

[Icenowy Zheng]

From: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>

Originally we enable a special gate bit when the compatible indicates
A23/33.

But according to BSP sources and user manuals, more SoCs will need this
gate bit.

So make it a common quirk configured in the config struct.

Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
Reviewed-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
 drivers/dma/sun6i-dma.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index a2358780ab2c..252b59c1d1d5 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -101,6 +101,17 @@ struct sun6i_dma_config {
 	u32 nr_max_channels;
 	u32 nr_max_requests;
 	u32 nr_max_vchans;
+	/*
+	 * In the datasheets/user manuals of newer Allwinner SoCs, a special
+	 * bit (bit 2 at register 0x20) is present.
+	 * It's named "DMA MCLK interface circuit auto gating bit" in the
+	 * documents, and the footnote of this register says that this bit
+	 * should be set up when initializing the DMA controller.
+	 * Allwinner A23/A33 user manuals do not have this bit documented,
+	 * however these SoCs really have and need this bit, as seen in the
+	 * BSP kernel source code.
+	 */
+	bool gate_needed;
 };
 
 /*
@@ -1009,6 +1020,7 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
 	.nr_max_channels = 8,
 	.nr_max_requests = 24,
 	.nr_max_vchans   = 37,
+	.gate_needed	 = true,
 };
 
 static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
@@ -1174,13 +1186,7 @@ static int sun6i_dma_probe(struct platform_device *pdev)
 		goto err_dma_unregister;
 	}
 
-	/*
-	 * sun8i variant requires us to toggle a dma gating register,
-	 * as seen in Allwinner's SDK. This register is not documented
-	 * in the A23 user manual.
-	 */
-	if (of_device_is_compatible(pdev->dev.of_node,
-				    "allwinner,sun8i-a23-dma"))
+	if (sdc->cfg->gate_needed)
 		writel(SUN8I_DMA_GATE_ENABLE, sdc->base + SUN8I_DMA_GATE);
 
 	return 0;
-- 
2.13.5

[PATCH RESEND 2/2] dmaengine: sun6i: support V3s SoC variant

[Icenowy Zheng]

From: Icenowy Zheng <icenowy@aosc.xyz>

Allwinner V3s has a DMA engine similar to the ones from A31, but with
fewer channels and DRQs.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/dma/sun6i-dma.txt |  1 +
 drivers/dma/sun6i-dma.c                             | 13 +++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 6b267045f522..98fbe1a5c6dd 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -9,6 +9,7 @@ Required properties:
 		  "allwinner,sun8i-a23-dma"
 		  "allwinner,sun8i-a83t-dma"
 		  "allwinner,sun8i-h3-dma"
+		  "allwinner,sun8i-v3s-dma"
 - reg:		Should contain the registers base address and length
 - interrupts:	Should contain a reference to the interrupt used by this device
 - clocks:	Should contain a reference to the parent AHB clock
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 252b59c1d1d5..bcd496edc70f 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -1040,11 +1040,24 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
 	.nr_max_vchans   = 34,
 };
 
+/*
+ * The V3s have only 8 physical channels, a maximum DRQ port id of 23,
+ * and a total of 24 usable source and destination endpoints.
+ */
+
+static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
+	.nr_max_channels = 8,
+	.nr_max_requests = 23,
+	.nr_max_vchans   = 24,
+	.gate_needed	 = true,
+};
+
 static const struct of_device_id sun6i_dma_match[] = {
 	{ .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
 	{ .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
 	{ .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg },
 	{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
+	{ .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun6i_dma_match);
-- 
2.13.5

[PATCH RESEND 2/2] dmaengine: sun6i: support V3s SoC variant

[Icenowy Zheng]

From: Icenowy Zheng <icenowy@aosc.xyz>

Allwinner V3s has a DMA engine similar to the ones from A31, but with
fewer channels and DRQs.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/dma/sun6i-dma.txt |  1 +
 drivers/dma/sun6i-dma.c                             | 13 +++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 6b267045f522..98fbe1a5c6dd 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -9,6 +9,7 @@ Required properties:
 		  "allwinner,sun8i-a23-dma"
 		  "allwinner,sun8i-a83t-dma"
 		  "allwinner,sun8i-h3-dma"
+		  "allwinner,sun8i-v3s-dma"
 - reg:		Should contain the registers base address and length
 - interrupts:	Should contain a reference to the interrupt used by this device
 - clocks:	Should contain a reference to the parent AHB clock
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 252b59c1d1d5..bcd496edc70f 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -1040,11 +1040,24 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
 	.nr_max_vchans   = 34,
 };
 
+/*
+ * The V3s have only 8 physical channels, a maximum DRQ port id of 23,
+ * and a total of 24 usable source and destination endpoints.
+ */
+
+static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
+	.nr_max_channels = 8,
+	.nr_max_requests = 23,
+	.nr_max_vchans   = 24,
+	.gate_needed	 = true,
+};
+
 static const struct of_device_id sun6i_dma_match[] = {
 	{ .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
 	{ .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
 	{ .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg },
 	{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
+	{ .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun6i_dma_match);
-- 
2.13.5

[PATCH RESEND 2/2] dmaengine: sun6i: support V3s SoC variant

[Icenowy Zheng]

From: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>

Allwinner V3s has a DMA engine similar to the ones from A31, but with
fewer channels and DRQs.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 Documentation/devicetree/bindings/dma/sun6i-dma.txt |  1 +
 drivers/dma/sun6i-dma.c                             | 13 +++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 6b267045f522..98fbe1a5c6dd 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -9,6 +9,7 @@ Required properties:
 		  "allwinner,sun8i-a23-dma"
 		  "allwinner,sun8i-a83t-dma"
 		  "allwinner,sun8i-h3-dma"
+		  "allwinner,sun8i-v3s-dma"
 - reg:		Should contain the registers base address and length
 - interrupts:	Should contain a reference to the interrupt used by this device
 - clocks:	Should contain a reference to the parent AHB clock
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 252b59c1d1d5..bcd496edc70f 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -1040,11 +1040,24 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
 	.nr_max_vchans   = 34,
 };
 
+/*
+ * The V3s have only 8 physical channels, a maximum DRQ port id of 23,
+ * and a total of 24 usable source and destination endpoints.
+ */
+
+static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
+	.nr_max_channels = 8,
+	.nr_max_requests = 23,
+	.nr_max_vchans   = 24,
+	.gate_needed	 = true,
+};
+
 static const struct of_device_id sun6i_dma_match[] = {
 	{ .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
 	{ .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
 	{ .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg },
 	{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
+	{ .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun6i_dma_match);
-- 
2.13.5

[PATCH RESEND 0/2] Allwinner V3s DMA support

[Vinod Koul]

On Tue, Aug 29, 2017 at 12:51:25PM +0800, Icenowy Zheng wrote:
> This is a dedicated patchset of Allwinner V3s DMA support, which used
> to be part of the audio codec support patchset.
> 
> It's a derivation of the DMA part of v3 of the codec patchset.

Applied, thanks

-- 
~Vinod

Re: [PATCH RESEND 0/2] Allwinner V3s DMA support

[Vinod Koul]

On Tue, Aug 29, 2017 at 12:51:25PM +0800, Icenowy Zheng wrote:
> This is a dedicated patchset of Allwinner V3s DMA support, which used
> to be part of the audio codec support patchset.
> 
> It's a derivation of the DMA part of v3 of the codec patchset.

Applied, thanks

-- 
~Vinod