* [Buildroot] Problem Building QT5 in Buildroot in buildroot-2017.02.4
@ 2017-09-26 16:19 John O'Sullivan
2017-09-26 16:44 ` Peter Seiderer
0 siblings, 1 reply; 4+ messages in thread
From: John O'Sullivan @ 2017-09-26 16:19 UTC (permalink / raw)
To: buildroot
When I try and build QT5 in buildroot 2017.02.4 I get any error;
ERROR: Feature 'system-pcre' was enabled, but the pre-condition 'libs.pcre' failed.
Target packages ?
? -> Libraries ?
? -> Text and terminal handling
BR2_PACKAGE_PCRE and its available options have been selected
Any reason why I am getting this error
----------------------------
Full trace
--------------------------------
Running configuration tests...
Done running configuration tests.
Configure summary:
Building on: x86_64
Building for: arm64
Configuration: cross_compile compile_examples enable_new_dtags largefile neon accessibility shared release c++11 c++14 c++1z concurrent mremap reduce_exports release_tools stl
Build options:
Mode ................................... release; optimized tools
Building shared libraries .............. yes
Using C++ standard ..................... C++1z
Using gold linker ...................... no
Using new DTAGS ........................ yes
Using precompiled headers .............. no
Using LTCG ............................. no
Target compiler supports:
NEON ................................. yes
Build parts ............................ libs
Qt modules and options:
Qt Concurrent .......................... yes
Qt D-Bus ............................... no
Qt D-Bus directly linked to libdbus .... no
Qt Gui ................................. yes
Qt Widgets ............................. yes
Support enabled for:
Accessibility .......................... yes
Using pkg-config ....................... yes
QML debugging .......................... yes
udev ................................... no
Using system zlib ...................... yes
Qt Core:
DoubleConversion ....................... yes
Using system DoubleConversion ........ no
GLib ................................... no
iconv .................................. no
ICU .................................... no
Logging backends:
journald ............................. no
syslog ............................... no
Using system PCRE ...................... no
Qt Network:
getaddrinfo() .......................... yes
getifaddrs() ........................... yes
IPv6 ifname ............................ yes
libproxy ............................... no
OpenSSL ................................ yes
Qt directly linked to OpenSSL ........ no
SCTP ................................... no
Use system proxies ..................... yes
Qt Sql:
DB2 (IBM) .............................. no
InterBase .............................. no
MySql .................................. no
OCI (Oracle) ........................... no
ODBC ................................... no
PostgreSQL ............................. no
SQLite2 ................................ no
SQLite ................................. no
Using system provided SQLite ......... no
TDS (Sybase) ........................... no
Qt Gui:
FreeType ............................... yes
Using system FreeType ................ yes
HarfBuzz ............................... yes
Using system HarfBuzz ................ no
Fontconfig ............................. no
Image formats:
GIF .................................. yes
ICO .................................. yes
JPEG ................................. yes
Using system libjpeg ............... yes
PNG .................................. yes
Using system libpng ................ yes
OpenGL:
EGL .................................. no
Desktop OpenGL ....................... no
OpenGL ES 2.0 ........................ no
OpenGL ES 3.0 ........................ no
OpenGL ES 3.1 ........................ no
Session Management ..................... yes
Features used by QPA backends:
evdev .................................. yes
libinput ............................... no
mtdev .................................. no
tslib .................................. no
xkbcommon-evdev ........................ no
QPA backends:
DirectFB ............................... yes
EGLFS .................................. no
LinuxFB ................................ no
Mir client ............................. no
Qt Widgets:
GTK+ ................................... no
Styles ................................. Fusion Windows
Qt PrintSupport:
CUPS ................................... no
Note: -optimized-tools is not useful in -release mode.
ERROR: Feature 'system-pcre' was enabled, but the pre-condition 'libs.pcre' failed.
________________________________
This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20170926/b4d9f89f/attachment.html>
^ permalink raw reply [flat|nested] 4+ messages in thread* [Buildroot] Problem Building QT5 in Buildroot in buildroot-2017.02.4
2017-09-26 16:19 [Buildroot] Problem Building QT5 in Buildroot in buildroot-2017.02.4 John O'Sullivan
@ 2017-09-26 16:44 ` Peter Seiderer
2017-09-26 19:36 ` Peter Seiderer
0 siblings, 1 reply; 4+ messages in thread
From: Peter Seiderer @ 2017-09-26 16:44 UTC (permalink / raw)
To: buildroot
Hello John,
On Tue, 26 Sep 2017 16:19:08 +0000, John O'Sullivan <John.OSullivan@BlackBox.com> wrote:
> When I try and build QT5 in buildroot 2017.02.4 I get any error;
>
> ERROR: Feature 'system-pcre' was enabled, but the pre-condition 'libs.pcre' failed.
>
>
> Target packages ?
> ? -> Libraries ?
> ? -> Text and terminal handling
>
> BR2_PACKAGE_PCRE and its available options have been selected
>
>
> Any reason why I am getting this error
Mind to share your defconfig? Will try to reproduce the failure...
Regards,
Peter
>
>
> ----------------------------
>
> Full trace
>
> --------------------------------
>
> Running configuration tests...
> Done running configuration tests.
>
> Configure summary:
>
>
> Building on: x86_64
> Building for: arm64
> Configuration: cross_compile compile_examples enable_new_dtags largefile neon accessibility shared release c++11 c++14 c++1z concurrent mremap reduce_exports release_tools stl
> Build options:
> Mode ................................... release; optimized tools
> Building shared libraries .............. yes
> Using C++ standard ..................... C++1z
> Using gold linker ...................... no
> Using new DTAGS ........................ yes
> Using precompiled headers .............. no
> Using LTCG ............................. no
> Target compiler supports:
> NEON ................................. yes
> Build parts ............................ libs
> Qt modules and options:
> Qt Concurrent .......................... yes
> Qt D-Bus ............................... no
> Qt D-Bus directly linked to libdbus .... no
> Qt Gui ................................. yes
> Qt Widgets ............................. yes
> Support enabled for:
> Accessibility .......................... yes
> Using pkg-config ....................... yes
> QML debugging .......................... yes
> udev ................................... no
> Using system zlib ...................... yes
> Qt Core:
> DoubleConversion ....................... yes
> Using system DoubleConversion ........ no
> GLib ................................... no
> iconv .................................. no
> ICU .................................... no
> Logging backends:
> journald ............................. no
> syslog ............................... no
> Using system PCRE ...................... no
> Qt Network:
> getaddrinfo() .......................... yes
> getifaddrs() ........................... yes
> IPv6 ifname ............................ yes
> libproxy ............................... no
> OpenSSL ................................ yes
> Qt directly linked to OpenSSL ........ no
> SCTP ................................... no
> Use system proxies ..................... yes
> Qt Sql:
> DB2 (IBM) .............................. no
> InterBase .............................. no
> MySql .................................. no
> OCI (Oracle) ........................... no
> ODBC ................................... no
> PostgreSQL ............................. no
> SQLite2 ................................ no
> SQLite ................................. no
> Using system provided SQLite ......... no
> TDS (Sybase) ........................... no
> Qt Gui:
> FreeType ............................... yes
> Using system FreeType ................ yes
> HarfBuzz ............................... yes
> Using system HarfBuzz ................ no
> Fontconfig ............................. no
> Image formats:
> GIF .................................. yes
> ICO .................................. yes
> JPEG ................................. yes
> Using system libjpeg ............... yes
> PNG .................................. yes
> Using system libpng ................ yes
> OpenGL:
> EGL .................................. no
> Desktop OpenGL ....................... no
> OpenGL ES 2.0 ........................ no
> OpenGL ES 3.0 ........................ no
> OpenGL ES 3.1 ........................ no
> Session Management ..................... yes
> Features used by QPA backends:
> evdev .................................. yes
> libinput ............................... no
> mtdev .................................. no
> tslib .................................. no
> xkbcommon-evdev ........................ no
> QPA backends:
> DirectFB ............................... yes
> EGLFS .................................. no
> LinuxFB ................................ no
> Mir client ............................. no
> Qt Widgets:
> GTK+ ................................... no
> Styles ................................. Fusion Windows
> Qt PrintSupport:
> CUPS ................................... no
>
> Note: -optimized-tools is not useful in -release mode.
>
> ERROR: Feature 'system-pcre' was enabled, but the pre-condition 'libs.pcre' failed.
>
>
> ________________________________
>
> This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Problem Building QT5 in Buildroot in buildroot-2017.02.4
2017-09-26 16:44 ` Peter Seiderer
@ 2017-09-26 19:36 ` Peter Seiderer
2017-09-27 13:34 ` John O'Sullivan
0 siblings, 1 reply; 4+ messages in thread
From: Peter Seiderer @ 2017-09-26 19:36 UTC (permalink / raw)
To: buildroot
Hello John,
On Tue, 26 Sep 2017 18:44:41 +0200, Peter Seiderer <ps.report@gmx.net> wrote:
> Hello John,
>
> On Tue, 26 Sep 2017 16:19:08 +0000, John O'Sullivan <John.OSullivan@BlackBox.com> wrote:
>
> > When I try and build QT5 in buildroot 2017.02.4 I get any error;
> >
> > ERROR: Feature 'system-pcre' was enabled, but the pre-condition 'libs.pcre' failed.
> >
> >
> > Target packages ?
> > ? -> Libraries ?
> > ? -> Text and terminal handling
> >
> > BR2_PACKAGE_PCRE and its available options have been selected
> >
> >
> > Any reason why I am getting this error
>
> Mind to share your defconfig? Will try to reproduce the failure...
And try 'make clean && make' (suspecting an incomplete build, pcre enabled/selected
and already build before enabling qt5 which selects additional PCRE_16 and PCRE_UTF
which has no effect without re-building the pcre package)...
Regards,
Peter
>
> Regards,
> Peter
>
> >
> >
> > ----------------------------
> >
> > Full trace
> >
> > --------------------------------
> >
> > Running configuration tests...
> > Done running configuration tests.
> >
> > Configure summary:
> >
> >
> > Building on: x86_64
> > Building for: arm64
> > Configuration: cross_compile compile_examples enable_new_dtags largefile neon accessibility shared release c++11 c++14 c++1z concurrent mremap reduce_exports release_tools stl
> > Build options:
> > Mode ................................... release; optimized tools
> > Building shared libraries .............. yes
> > Using C++ standard ..................... C++1z
> > Using gold linker ...................... no
> > Using new DTAGS ........................ yes
> > Using precompiled headers .............. no
> > Using LTCG ............................. no
> > Target compiler supports:
> > NEON ................................. yes
> > Build parts ............................ libs
> > Qt modules and options:
> > Qt Concurrent .......................... yes
> > Qt D-Bus ............................... no
> > Qt D-Bus directly linked to libdbus .... no
> > Qt Gui ................................. yes
> > Qt Widgets ............................. yes
> > Support enabled for:
> > Accessibility .......................... yes
> > Using pkg-config ....................... yes
> > QML debugging .......................... yes
> > udev ................................... no
> > Using system zlib ...................... yes
> > Qt Core:
> > DoubleConversion ....................... yes
> > Using system DoubleConversion ........ no
> > GLib ................................... no
> > iconv .................................. no
> > ICU .................................... no
> > Logging backends:
> > journald ............................. no
> > syslog ............................... no
> > Using system PCRE ...................... no
> > Qt Network:
> > getaddrinfo() .......................... yes
> > getifaddrs() ........................... yes
> > IPv6 ifname ............................ yes
> > libproxy ............................... no
> > OpenSSL ................................ yes
> > Qt directly linked to OpenSSL ........ no
> > SCTP ................................... no
> > Use system proxies ..................... yes
> > Qt Sql:
> > DB2 (IBM) .............................. no
> > InterBase .............................. no
> > MySql .................................. no
> > OCI (Oracle) ........................... no
> > ODBC ................................... no
> > PostgreSQL ............................. no
> > SQLite2 ................................ no
> > SQLite ................................. no
> > Using system provided SQLite ......... no
> > TDS (Sybase) ........................... no
> > Qt Gui:
> > FreeType ............................... yes
> > Using system FreeType ................ yes
> > HarfBuzz ............................... yes
> > Using system HarfBuzz ................ no
> > Fontconfig ............................. no
> > Image formats:
> > GIF .................................. yes
> > ICO .................................. yes
> > JPEG ................................. yes
> > Using system libjpeg ............... yes
> > PNG .................................. yes
> > Using system libpng ................ yes
> > OpenGL:
> > EGL .................................. no
> > Desktop OpenGL ....................... no
> > OpenGL ES 2.0 ........................ no
> > OpenGL ES 3.0 ........................ no
> > OpenGL ES 3.1 ........................ no
> > Session Management ..................... yes
> > Features used by QPA backends:
> > evdev .................................. yes
> > libinput ............................... no
> > mtdev .................................. no
> > tslib .................................. no
> > xkbcommon-evdev ........................ no
> > QPA backends:
> > DirectFB ............................... yes
> > EGLFS .................................. no
> > LinuxFB ................................ no
> > Mir client ............................. no
> > Qt Widgets:
> > GTK+ ................................... no
> > Styles ................................. Fusion Windows
> > Qt PrintSupport:
> > CUPS ................................... no
> >
> > Note: -optimized-tools is not useful in -release mode.
> >
> > ERROR: Feature 'system-pcre' was enabled, but the pre-condition 'libs.pcre' failed.
> >
> >
> > ________________________________
> >
> > This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email.
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Problem Building QT5 in Buildroot in buildroot-2017.02.4
2017-09-26 19:36 ` Peter Seiderer
@ 2017-09-27 13:34 ` John O'Sullivan
0 siblings, 0 replies; 4+ messages in thread
From: John O'Sullivan @ 2017-09-27 13:34 UTC (permalink / raw)
To: buildroot
Thanks Peter,
You were correct, the clean and make fixed the issue, thanks for your help
Regards
John
-----Original Message-----
From: Peter Seiderer [mailto:ps.report at gmx.net]
Sent: 26 September 2017 20:36
To: John O'Sullivan
Cc: buildroot at busybox.net
Subject: Re: [Buildroot] Problem Building QT5 in Buildroot in buildroot-2017.02.4
Hello John,
On Tue, 26 Sep 2017 18:44:41 +0200, Peter Seiderer <ps.report@gmx.net> wrote:
> Hello John,
>
> On Tue, 26 Sep 2017 16:19:08 +0000, John O'Sullivan <John.OSullivan@BlackBox.com> wrote:
>
> > When I try and build QT5 in buildroot 2017.02.4 I get any error;
> >
> > ERROR: Feature 'system-pcre' was enabled, but the pre-condition 'libs.pcre' failed.
> >
> >
> > Target packages ?
> > ? -> Libraries ?
> > ? -> Text and terminal handling
> >
> > BR2_PACKAGE_PCRE and its available options have been selected
> >
> >
> > Any reason why I am getting this error
>
> Mind to share your defconfig? Will try to reproduce the failure...
And try 'make clean && make' (suspecting an incomplete build, pcre enabled/selected and already build before enabling qt5 which selects additional PCRE_16 and PCRE_UTF which has no effect without re-building the pcre package)...
Regards,
Peter
>
> Regards,
> Peter
>
> >
> >
> > ----------------------------
> >
> > Full trace
> >
> > --------------------------------
> >
> > Running configuration tests...
> > Done running configuration tests.
> >
> > Configure summary:
> >
> >
> > Building on: x86_64
> > Building for: arm64
> > Configuration: cross_compile compile_examples enable_new_dtags
> > largefile neon accessibility shared release c++11 c++14 c++1z concurrent mremap reduce_exports release_tools stl Build options:
> > Mode ................................... release; optimized tools
> > Building shared libraries .............. yes
> > Using C++ standard ..................... C++1z
> > Using gold linker ...................... no
> > Using new DTAGS ........................ yes
> > Using precompiled headers .............. no
> > Using LTCG ............................. no
> > Target compiler supports:
> > NEON ................................. yes
> > Build parts ............................ libs Qt modules and
> > options:
> > Qt Concurrent .......................... yes
> > Qt D-Bus ............................... no
> > Qt D-Bus directly linked to libdbus .... no
> > Qt Gui ................................. yes
> > Qt Widgets ............................. yes Support enabled for:
> > Accessibility .......................... yes
> > Using pkg-config ....................... yes
> > QML debugging .......................... yes
> > udev ................................... no
> > Using system zlib ...................... yes Qt Core:
> > DoubleConversion ....................... yes
> > Using system DoubleConversion ........ no
> > GLib ................................... no
> > iconv .................................. no
> > ICU .................................... no
> > Logging backends:
> > journald ............................. no
> > syslog ............................... no
> > Using system PCRE ...................... no Qt Network:
> > getaddrinfo() .......................... yes
> > getifaddrs() ........................... yes
> > IPv6 ifname ............................ yes
> > libproxy ............................... no
> > OpenSSL ................................ yes
> > Qt directly linked to OpenSSL ........ no
> > SCTP ................................... no
> > Use system proxies ..................... yes Qt Sql:
> > DB2 (IBM) .............................. no
> > InterBase .............................. no
> > MySql .................................. no
> > OCI (Oracle) ........................... no
> > ODBC ................................... no
> > PostgreSQL ............................. no
> > SQLite2 ................................ no
> > SQLite ................................. no
> > Using system provided SQLite ......... no
> > TDS (Sybase) ........................... no Qt Gui:
> > FreeType ............................... yes
> > Using system FreeType ................ yes
> > HarfBuzz ............................... yes
> > Using system HarfBuzz ................ no
> > Fontconfig ............................. no
> > Image formats:
> > GIF .................................. yes
> > ICO .................................. yes
> > JPEG ................................. yes
> > Using system libjpeg ............... yes
> > PNG .................................. yes
> > Using system libpng ................ yes
> > OpenGL:
> > EGL .................................. no
> > Desktop OpenGL ....................... no
> > OpenGL ES 2.0 ........................ no
> > OpenGL ES 3.0 ........................ no
> > OpenGL ES 3.1 ........................ no
> > Session Management ..................... yes Features used by QPA
> > backends:
> > evdev .................................. yes
> > libinput ............................... no
> > mtdev .................................. no
> > tslib .................................. no
> > xkbcommon-evdev ........................ no QPA backends:
> > DirectFB ............................... yes
> > EGLFS .................................. no
> > LinuxFB ................................ no
> > Mir client ............................. no Qt Widgets:
> > GTK+ ................................... no
> > Styles ................................. Fusion Windows Qt
> > PrintSupport:
> > CUPS ................................... no
> >
> > Note: -optimized-tools is not useful in -release mode.
> >
> > ERROR: Feature 'system-pcre' was enabled, but the pre-condition 'libs.pcre' failed.
> >
> >
> > ________________________________
> >
> > This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email.
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-09-27 13:34 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-09-26 16:19 [Buildroot] Problem Building QT5 in Buildroot in buildroot-2017.02.4 John O'Sullivan
2017-09-26 16:44 ` Peter Seiderer
2017-09-26 19:36 ` Peter Seiderer
2017-09-27 13:34 ` John O'Sullivan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.