From: linus.luessing@c0d3.blue (Linus Lüssing)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v7 6/6] ARM: dts: meson8b: add support for booting the secondary CPU cores
Date: Fri, 29 Sep 2017 13:29:59 +0200 [thread overview]
Message-ID: <20170929112959.GM6726@otheros> (raw)
In-Reply-To: <20170917164523.6970-7-martin.blumenstingl@googlemail.com>
A five hours test run with the stress-ng tool worked fine for this
patchset for me.
stress-ng command:
$ stress-ng -v --sequential 0 -t 120s --exclude sysfs,opcode --metrics
Logfile (6.3MB):
http://metameute.de/~tux/linux/amlogic/stress-ng-odroidc1%2b-with-resmem%2bsmp-log.txt
Tested device:
- Odroid C1+
Tested OS:
- Debian stable (stress-ng 0.07.16)
Tested kernel: v4.14-rc1 plus this patchset plus:
- "ARM: dts: meson: fixing USB support on Meson6, Meson8 and Meson8b"
https://patchwork.kernel.org/patch/9965871/
- "ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board"
https://patchwork.kernel.org/patch/9961565/
- "[RFC] ARM: dts: meson8b: add reserved memory zones"
https://patchwork.kernel.org/patch/9977479/
Tested kernel config:
- multi_v7_defconfig, except CONFIG_DRM_TEGRA=n (build error otherwise)
I had to exclude the sysfs and opcode tests though. The former
created an unhandled kernel paging request. And the latter a
silent freeze after some seconds.
Those two issues seem unrelated to this patchset though,
therefore
Tested-by: Linus L?ssing <linus.luessing@c0d3.blue>
WARNING: multiple messages have this Message-ID (diff)
From: linus.luessing@c0d3.blue (Linus Lüssing)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 6/6] ARM: dts: meson8b: add support for booting the secondary CPU cores
Date: Fri, 29 Sep 2017 13:29:59 +0200 [thread overview]
Message-ID: <20170929112959.GM6726@otheros> (raw)
In-Reply-To: <20170917164523.6970-7-martin.blumenstingl@googlemail.com>
A five hours test run with the stress-ng tool worked fine for this
patchset for me.
stress-ng command:
$ stress-ng -v --sequential 0 -t 120s --exclude sysfs,opcode --metrics
Logfile (6.3MB):
http://metameute.de/~tux/linux/amlogic/stress-ng-odroidc1%2b-with-resmem%2bsmp-log.txt
Tested device:
- Odroid C1+
Tested OS:
- Debian stable (stress-ng 0.07.16)
Tested kernel: v4.14-rc1 plus this patchset plus:
- "ARM: dts: meson: fixing USB support on Meson6, Meson8 and Meson8b"
https://patchwork.kernel.org/patch/9965871/
- "ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board"
https://patchwork.kernel.org/patch/9961565/
- "[RFC] ARM: dts: meson8b: add reserved memory zones"
https://patchwork.kernel.org/patch/9977479/
Tested kernel config:
- multi_v7_defconfig, except CONFIG_DRM_TEGRA=n (build error otherwise)
I had to exclude the sysfs and opcode tests though. The former
created an unhandled kernel paging request. And the latter a
silent freeze after some seconds.
Those two issues seem unrelated to this patchset though,
therefore
Tested-by: Linus L?ssing <linus.luessing@c0d3.blue>
WARNING: multiple messages have this Message-ID (diff)
From: "Linus Lüssing" <linus.luessing@c0d3.blue>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
f.fainelli@gmail.com, arnd@arndb.de,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
khilman@baylibre.com, linux@armlinux.org.uk, robh+dt@kernel.org,
carlo@caione.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v7 6/6] ARM: dts: meson8b: add support for booting the secondary CPU cores
Date: Fri, 29 Sep 2017 13:29:59 +0200 [thread overview]
Message-ID: <20170929112959.GM6726@otheros> (raw)
In-Reply-To: <20170917164523.6970-7-martin.blumenstingl@googlemail.com>
A five hours test run with the stress-ng tool worked fine for this
patchset for me.
stress-ng command:
$ stress-ng -v --sequential 0 -t 120s --exclude sysfs,opcode --metrics
Logfile (6.3MB):
http://metameute.de/~tux/linux/amlogic/stress-ng-odroidc1%2b-with-resmem%2bsmp-log.txt
Tested device:
- Odroid C1+
Tested OS:
- Debian stable (stress-ng 0.07.16)
Tested kernel: v4.14-rc1 plus this patchset plus:
- "ARM: dts: meson: fixing USB support on Meson6, Meson8 and Meson8b"
https://patchwork.kernel.org/patch/9965871/
- "ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board"
https://patchwork.kernel.org/patch/9961565/
- "[RFC] ARM: dts: meson8b: add reserved memory zones"
https://patchwork.kernel.org/patch/9977479/
Tested kernel config:
- multi_v7_defconfig, except CONFIG_DRM_TEGRA=n (build error otherwise)
I had to exclude the sysfs and opcode tests though. The former
created an unhandled kernel paging request. And the latter a
silent freeze after some seconds.
Those two issues seem unrelated to this patchset though,
therefore
Tested-by: Linus Lüssing <linus.luessing@c0d3.blue>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-09-29 11:29 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-17 16:45 [PATCH v7 0/6] SMP and CPU hotplug support for Meson8/Meson8b Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` [PATCH v7 1/6] dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` [PATCH v7 2/6] ARM: smp_scu: add a helper for powering on a specific CPU Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-10-23 9:51 ` Russell King - ARM Linux
2017-10-23 9:51 ` Russell King - ARM Linux
2017-10-23 9:51 ` Russell King - ARM Linux
2017-09-17 16:45 ` [PATCH v7 3/6] ARM: smp_scu: allow the platform code to read the SCU CPU status Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-10-23 9:54 ` Russell King - ARM Linux
2017-10-23 9:54 ` Russell King - ARM Linux
2017-10-23 9:54 ` Russell King - ARM Linux
2017-09-17 16:45 ` [PATCH v7 4/6] ARM: meson: Add SMP bringup code for Meson8 and Meson8b Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-10-28 21:08 ` Linus Lüssing
2017-10-28 21:08 ` Linus Lüssing
2017-10-28 21:08 ` Linus Lüssing
2017-09-17 16:45 ` [PATCH v7 5/6] ARM: dts: meson8: add support for booting the secondary CPU cores Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` [PATCH v7 6/6] ARM: dts: meson8b: " Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-17 16:45 ` Martin Blumenstingl
2017-09-29 11:29 ` Linus Lüssing [this message]
2017-09-29 11:29 ` Linus Lüssing
2017-09-29 11:29 ` Linus Lüssing
2017-10-01 12:19 ` [PATCH v7 0/6] SMP and CPU hotplug support for Meson8/Meson8b Martin Blumenstingl
2017-10-01 12:19 ` Martin Blumenstingl
2017-10-01 12:19 ` Martin Blumenstingl
2017-10-06 21:30 ` Kevin Hilman
2017-10-06 21:30 ` Kevin Hilman
2017-10-06 21:30 ` Kevin Hilman
2017-10-20 22:14 ` Martin Blumenstingl
2017-10-20 22:14 ` Martin Blumenstingl
2017-10-20 22:14 ` Martin Blumenstingl
2017-10-23 9:49 ` Russell King - ARM Linux
2017-10-23 9:49 ` Russell King - ARM Linux
2017-10-23 9:49 ` Russell King - ARM Linux
2017-10-25 21:05 ` Martin Blumenstingl
2017-10-25 21:05 ` Martin Blumenstingl
2017-10-25 21:05 ` Martin Blumenstingl
2017-10-29 15:31 ` Kevin Hilman
2017-10-29 15:31 ` Kevin Hilman
2017-10-29 15:31 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170929112959.GM6726@otheros \
--to=linus.luessing@c0d3.blue \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.