* [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model
@ 2017-09-18 7:25 Wenyou Yang
2017-09-18 7:25 ` [U-Boot] [PATCH v3 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO Wenyou Yang
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Wenyou Yang @ 2017-09-18 7:25 UTC (permalink / raw)
To: u-boot
Convert the boards to support the driver model of LCD/video via
enabling CONFIG_DM_VIDEO, remove CONFIG_LCD and the unnecessary code.
Changes in v3:
- Collect the Reviewed-by tags.
Changes in v2:
- Rebase the u-boot/master (5541543f686).
- Drop the applied patches.
- Improve the commit log.
Wenyou Yang (5):
board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO
board: sama5d3xek: Convert to CONFIG_DM_VIDEO
board: sama5d4ek: Convert to CONFIG_DM_VIDEO
board: sama5d4_xplained: Convert to CONFIG_DM_VIDEO
board: at91sam9x5ek: Convert to CONFIG_DM_VIDEO
arch/arm/dts/at91-sama5d2_xplained.dts | 60 +++++++++++++
arch/arm/dts/at91-sama5d4_xplained.dts | 25 ++++++
arch/arm/dts/at91-sama5d4ek.dts | 26 ++++++
arch/arm/dts/sama5d2.dtsi | 7 ++
arch/arm/dts/sama5d36ek_cmp.dts | 1 +
arch/arm/dts/sama5d3_lcd.dtsi | 21 +----
arch/arm/dts/sama5d3xdm.dtsi | 26 ++++++
arch/arm/dts/sama5d4.dtsi | 21 +----
arch/arm/mach-at91/Kconfig | 4 +
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 111 ++----------------------
board/atmel/common/video_display.c | 2 +-
board/atmel/sama5d2_xplained/sama5d2_xplained.c | 95 ++------------------
board/atmel/sama5d3xek/sama5d3xek.c | 83 +-----------------
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 102 ++--------------------
board/atmel/sama5d4ek/sama5d4ek.c | 97 ++-------------------
configs/at91sam9x5ek_dataflash_defconfig | 3 +-
configs/at91sam9x5ek_mmc_defconfig | 3 +-
configs/at91sam9x5ek_nandflash_defconfig | 3 +-
configs/at91sam9x5ek_spiflash_defconfig | 3 +-
configs/sama5d2_xplained_mmc_defconfig | 2 +
configs/sama5d2_xplained_spiflash_defconfig | 2 +
configs/sama5d36ek_cmp_mmc_defconfig | 3 +-
configs/sama5d36ek_cmp_nandflash_defconfig | 3 +-
configs/sama5d36ek_cmp_spiflash_defconfig | 3 +-
configs/sama5d3xek_mmc_defconfig | 3 +-
configs/sama5d3xek_nandflash_defconfig | 3 +-
configs/sama5d3xek_spiflash_defconfig | 3 +-
configs/sama5d4_xplained_mmc_defconfig | 2 +
configs/sama5d4_xplained_nandflash_defconfig | 2 +
configs/sama5d4_xplained_spiflash_defconfig | 2 +
configs/sama5d4ek_mmc_defconfig | 3 +-
configs/sama5d4ek_nandflash_defconfig | 3 +-
configs/sama5d4ek_spiflash_defconfig | 3 +-
include/configs/at91sam9x5ek.h | 10 ---
include/configs/sama5d2_xplained.h | 12 ---
include/configs/sama5d3xek.h | 9 --
include/configs/sama5d4_xplained.h | 11 ---
include/configs/sama5d4ek.h | 9 --
38 files changed, 217 insertions(+), 564 deletions(-)
--
2.13.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v3 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO
2017-09-18 7:25 [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Wenyou Yang
@ 2017-09-18 7:25 ` Wenyou Yang
2017-09-18 7:25 ` [U-Boot] [PATCH v3 2/5] board: sama5d3xek: " Wenyou Yang
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Wenyou Yang @ 2017-09-18 7:25 UTC (permalink / raw)
To: u-boot
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
Changes in v3: None
Changes in v2: None
arch/arm/dts/at91-sama5d2_xplained.dts | 60 ++++++++++++++++
arch/arm/dts/sama5d2.dtsi | 7 ++
arch/arm/mach-at91/Kconfig | 1 +
board/atmel/sama5d2_xplained/sama5d2_xplained.c | 95 ++-----------------------
configs/sama5d2_xplained_mmc_defconfig | 2 +
configs/sama5d2_xplained_spiflash_defconfig | 2 +
include/configs/sama5d2_xplained.h | 12 ----
7 files changed, 79 insertions(+), 100 deletions(-)
diff --git a/arch/arm/dts/at91-sama5d2_xplained.dts b/arch/arm/dts/at91-sama5d2_xplained.dts
index b00aaa2c79..01326a1ee0 100644
--- a/arch/arm/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/dts/at91-sama5d2_xplained.dts
@@ -41,6 +41,31 @@
};
apb {
+ hlcdc: hlcdc at f0000000 {
+ atmel,vl-bpix = <4>;
+ atmel,guard-time = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ display-timings {
+ u-boot,dm-pre-reloc;
+ 480x272 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ hback-porch = <2>;
+ vfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <11>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
qspi0: spi at f0020000 {
status = "okay";
@@ -117,6 +142,41 @@
bias-disable;
};
+ pinctrl_lcd_base: pinctrl_lcd_base {
+ pinmux = <PIN_PC30__LCDVSYNC>,
+ <PIN_PC31__LCDHSYNC>,
+ <PIN_PD1__LCDDEN>,
+ <PIN_PD0__LCDPCK>;
+ bias-disable;
+ };
+
+ pinctrl_lcd_pwm: pinctrl_lcd_pwm {
+ pinmux = <PIN_PC28__LCDPWM>;
+ bias-disable;
+ };
+
+ pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
+ pinmux = <PIN_PC10__LCDDAT2>,
+ <PIN_PC11__LCDDAT3>,
+ <PIN_PC12__LCDDAT4>,
+ <PIN_PC13__LCDDAT5>,
+ <PIN_PC14__LCDDAT6>,
+ <PIN_PC15__LCDDAT7>,
+ <PIN_PC16__LCDDAT10>,
+ <PIN_PC17__LCDDAT11>,
+ <PIN_PC18__LCDDAT12>,
+ <PIN_PC19__LCDDAT13>,
+ <PIN_PC20__LCDDAT14>,
+ <PIN_PC21__LCDDAT15>,
+ <PIN_PC22__LCDDAT18>,
+ <PIN_PC23__LCDDAT19>,
+ <PIN_PC24__LCDDAT20>,
+ <PIN_PC25__LCDDAT21>,
+ <PIN_PC26__LCDDAT22>,
+ <PIN_PC27__LCDDAT23>;
+ bias-disable;
+ };
+
pinctrl_macb0_phy_irq: macb0_phy_irq {
pinmux = <PIN_PC9__GPIO>;
bias-disable;
diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi
index b02a602378..7520446dc1 100644
--- a/arch/arm/dts/sama5d2.dtsi
+++ b/arch/arm/dts/sama5d2.dtsi
@@ -69,6 +69,13 @@
#size-cells = <1>;
u-boot,dm-pre-reloc;
+ hlcdc: hlcdc at f0000000 {
+ compatible = "atmel,at91sam9x5-hlcdc";
+ reg = <0xf0000000 0x2000>;
+ clocks = <&lcdc_clk>;
+ status = "disabled";
+ };
+
pmc: pmc at f0014000 {
compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0e71b69a19..abc79d9637 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -153,6 +153,7 @@ config TARGET_SAMA5D2_XPLAINED
select SAMA5D2
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
config TARGET_SAMA5D27_SOM1_EK
bool "SAMA5D27 SOM1 EK board"
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index 5758653030..778142ac71 100644
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -6,10 +6,7 @@
*/
#include <common.h>
-#include <atmel_hlcdc.h>
#include <debug_uart.h>
-#include <lcd.h>
-#include <version.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/atmel_pio4.h>
@@ -26,90 +23,15 @@ static void board_usb_hw_init(void)
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1);
}
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 480,
- .vl_row = 272,
- .vl_clk = 9000000,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_hsync_len = 41,
- .vl_left_margin = 2,
- .vl_right_margin = 2,
- .vl_vsync_len = 11,
- .vl_upper_margin = 2,
- .vl_lower_margin = 2,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void) { /* Empty! */ }
-void lcd_disable(void) { /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
{
- return 1;
-}
-
-static void board_lcd_hw_init(void)
-{
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */
- atmel_pio4_set_a_periph(AT91_PIO_PORTD, 0, 0); /* LCDPCK */
- atmel_pio4_set_a_periph(AT91_PIO_PORTD, 1, 0); /* LCDDEN */
-
- /* LCDDAT0 */
- /* LCDDAT1 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */
-
- /* LCDDAT8 */
- /* LCDDAT9 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */
-
- /* LCDD16 */
- /* LCDD17 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
- ulong dram_size;
- int i;
- char temp[32];
-
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("2015 ATMEL Corp\n");
- lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
-
- lcd_printf("%ld MB SDRAM\n", dram_size >> 20);
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
+#endif
+ return 0;
}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
+#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void board_uart1_hw_init(void)
@@ -142,9 +64,6 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_LCD
- board_lcd_hw_init();
-#endif
#ifdef CONFIG_CMD_USB
board_usb_hw_init();
#endif
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index 215961a65c..87fc049b6d 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -82,3 +82,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
index 869d405838..37572489e2 100644
--- a/configs/sama5d2_xplained_spiflash_defconfig
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -79,3 +79,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 4f24a56899..545ba1740d 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -35,18 +35,6 @@
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
-/* LCD */
-
-#ifdef CONFIG_LCD
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#endif
-
#ifdef CONFIG_SD_BOOT
/* bootstrap + u-boot + env in sd card */
--
2.13.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v3 2/5] board: sama5d3xek: Convert to CONFIG_DM_VIDEO
2017-09-18 7:25 [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Wenyou Yang
2017-09-18 7:25 ` [U-Boot] [PATCH v3 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO Wenyou Yang
@ 2017-09-18 7:25 ` Wenyou Yang
2017-09-18 7:25 ` [U-Boot] [PATCH v3 3/5] board: sama5d4ek: " Wenyou Yang
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Wenyou Yang @ 2017-09-18 7:25 UTC (permalink / raw)
To: u-boot
From: Wenyou Yang <wenyou.yang@atmel.com>
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
Changes in v3: None
Changes in v2: None
arch/arm/dts/sama5d36ek_cmp.dts | 1 +
arch/arm/dts/sama5d3_lcd.dtsi | 21 +-------
arch/arm/dts/sama5d3xdm.dtsi | 26 ++++++++++
board/atmel/sama5d3xek/sama5d3xek.c | 83 ++----------------------------
configs/sama5d36ek_cmp_mmc_defconfig | 3 +-
configs/sama5d36ek_cmp_nandflash_defconfig | 3 +-
configs/sama5d36ek_cmp_spiflash_defconfig | 3 +-
configs/sama5d3xek_mmc_defconfig | 3 +-
configs/sama5d3xek_nandflash_defconfig | 3 +-
configs/sama5d3xek_spiflash_defconfig | 3 +-
include/configs/sama5d3xek.h | 9 ----
11 files changed, 43 insertions(+), 115 deletions(-)
diff --git a/arch/arm/dts/sama5d36ek_cmp.dts b/arch/arm/dts/sama5d36ek_cmp.dts
index be41490f63..c17bc9f0dc 100644
--- a/arch/arm/dts/sama5d36ek_cmp.dts
+++ b/arch/arm/dts/sama5d36ek_cmp.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sama5d36.dtsi"
#include "sama5d3xmb_cmp.dtsi"
+#include "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D36-EK";
diff --git a/arch/arm/dts/sama5d3_lcd.dtsi b/arch/arm/dts/sama5d3_lcd.dtsi
index 14d7c2bc75..10fb3a97ea 100644
--- a/arch/arm/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/dts/sama5d3_lcd.dtsi
@@ -14,31 +14,12 @@
ahb {
apb {
hlcdc: hlcdc at f0030000 {
- compatible = "atmel,sama5d3-hlcdc";
+ compatible = "atmel,at91sam9x5-hlcdc";
reg = <0xf0030000 0x2000>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
};
pinctrl at fffff200 {
diff --git a/arch/arm/dts/sama5d3xdm.dtsi b/arch/arm/dts/sama5d3xdm.dtsi
index 035ab72b39..b3df9af2b4 100644
--- a/arch/arm/dts/sama5d3xdm.dtsi
+++ b/arch/arm/dts/sama5d3xdm.dtsi
@@ -10,6 +10,32 @@
/ {
ahb {
apb {
+ hlcdc: hlcdc at f0030000 {
+ atmel,vl-bpix = <4>;
+ atmel,output-mode = <24>;
+ atmel,guard-time = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888_alt>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ display-timings {
+ u-boot,dm-pre-reloc;
+ 800x480 {
+ clock-frequency = <24000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hsync-len = <5>;
+ hfront-porch = <64>;
+ hback-porch = <64>;
+ vfront-porch = <22>;
+ vback-porch = <21>;
+ vsync-len = <5>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
i2c1: i2c at f0018000 {
qt1070: keyboard at 1b {
compatible = "qt1070";
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index 6d473fc06d..98d846fd79 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -13,9 +13,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <debug_uart.h>
-#include <lcd.h>
#include <linux/ctype.h>
-#include <atmel_hlcdc.h>
#include <phy.h>
#include <micrel.h>
#include <spl.h>
@@ -132,80 +130,6 @@ static void sama5d3xek_mci_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 800,
- .vl_row = 480,
- .vl_clk = 24000000,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_hsync_len = 128,
- .vl_left_margin = 64,
- .vl_right_margin = 64,
- .vl_vsync_len = 2,
- .vl_upper_margin = 22,
- .vl_lower_margin = 21,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
-}
-
-void lcd_disable(void)
-{
-}
-
-static void sama5d3xek_lcd_hw_init(void)
-{
- gd->fb_base = CONFIG_SAMA5D3_LCD_BASE;
-
- /* The higher 8 bit of LCD is board related */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */
-
- /* Configure lower 16 bit of LCD and enable clock */
- at91_lcd_hw_init();
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
- ulong dram_size;
- uint64_t nand_size;
- int i;
- char temp[32];
-
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("(C) 2013 ATMEL Corp\n");
- lcd_printf("at91 at atmel.com\n");
- lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
-
- nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += get_nand_dev_by_index(i)->size;
-#endif
- lcd_printf("%ld MB SDRAM, %lld MB NAND\n",
- dram_size >> 20, nand_size >> 20);
-}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
-
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
@@ -240,10 +164,6 @@ int board_init(void)
#ifdef CONFIG_GENERIC_ATMEL_MCI
sama5d3xek_mci_hw_init();
#endif
-#ifdef CONFIG_LCD
- if (has_lcdc())
- sama5d3xek_lcd_hw_init();
-#endif
return 0;
}
@@ -269,6 +189,9 @@ int board_late_init(void)
strcat(name, "ek.dtb");
env_set("dtb_name", name);
#endif
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
+#endif
return 0;
}
#endif
diff --git a/configs/sama5d36ek_cmp_mmc_defconfig b/configs/sama5d36ek_cmp_mmc_defconfig
index b6c60cbcae..7c27812c3f 100644
--- a/configs/sama5d36ek_cmp_mmc_defconfig
+++ b/configs/sama5d36ek_cmp_mmc_defconfig
@@ -55,4 +55,5 @@ CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d36ek_cmp_nandflash_defconfig b/configs/sama5d36ek_cmp_nandflash_defconfig
index 01b57efe03..09508dafa4 100644
--- a/configs/sama5d36ek_cmp_nandflash_defconfig
+++ b/configs/sama5d36ek_cmp_nandflash_defconfig
@@ -55,5 +55,6 @@ CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
-CONFIG_LCD=y
CONFIG_FAT_WRITE=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d36ek_cmp_spiflash_defconfig b/configs/sama5d36ek_cmp_spiflash_defconfig
index e29e3a8098..1c004ef2ac 100644
--- a/configs/sama5d36ek_cmp_spiflash_defconfig
+++ b/configs/sama5d36ek_cmp_spiflash_defconfig
@@ -55,5 +55,6 @@ CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
CONFIG_FAT_WRITE=y
diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig
index f45449fd93..8b4c37a125 100644
--- a/configs/sama5d3xek_mmc_defconfig
+++ b/configs/sama5d3xek_mmc_defconfig
@@ -81,4 +81,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig
index 6217600f01..f9d4b8db3a 100644
--- a/configs/sama5d3xek_nandflash_defconfig
+++ b/configs/sama5d3xek_nandflash_defconfig
@@ -76,5 +76,6 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
CONFIG_FAT_WRITE=y
diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig
index 2fe08e4e59..7399b3e51f 100644
--- a/configs/sama5d3xek_spiflash_defconfig
+++ b/configs/sama5d3xek_spiflash_defconfig
@@ -77,5 +77,6 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
CONFIG_FAT_WRITE=y
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index bd93a1e84c..9ec1e76052 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -28,15 +28,6 @@
*/
#define ATMEL_PMC_UHP (1 << 6)
-/* LCD */
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
/* board specific (not enough SRAM) */
#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000
--
2.13.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v3 3/5] board: sama5d4ek: Convert to CONFIG_DM_VIDEO
2017-09-18 7:25 [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Wenyou Yang
2017-09-18 7:25 ` [U-Boot] [PATCH v3 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO Wenyou Yang
2017-09-18 7:25 ` [U-Boot] [PATCH v3 2/5] board: sama5d3xek: " Wenyou Yang
@ 2017-09-18 7:25 ` Wenyou Yang
2017-09-18 7:26 ` [U-Boot] [PATCH v3 4/5] board: sama5d4_xplained: " Wenyou Yang
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Wenyou Yang @ 2017-09-18 7:25 UTC (permalink / raw)
To: u-boot
From: Wenyou Yang <wenyou.yang@atmel.com>
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
Changes in v3: None
Changes in v2: None
arch/arm/dts/at91-sama5d4ek.dts | 26 ++++++++++
arch/arm/mach-at91/Kconfig | 1 +
board/atmel/sama5d4ek/sama5d4ek.c | 97 +++--------------------------------
configs/sama5d4ek_mmc_defconfig | 3 +-
configs/sama5d4ek_nandflash_defconfig | 3 +-
configs/sama5d4ek_spiflash_defconfig | 3 +-
include/configs/sama5d4ek.h | 9 ----
7 files changed, 39 insertions(+), 103 deletions(-)
diff --git a/arch/arm/dts/at91-sama5d4ek.dts b/arch/arm/dts/at91-sama5d4ek.dts
index b965f5b39d..a5d75452cf 100644
--- a/arch/arm/dts/at91-sama5d4ek.dts
+++ b/arch/arm/dts/at91-sama5d4ek.dts
@@ -75,6 +75,32 @@
ahb {
apb {
+ hlcdc: hlcdc at f0000000 {
+ atmel,vl-bpix = <4>;
+ atmel,output-mode = <18>;
+ atmel,guard-time = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ display-timings {
+ u-boot,dm-pre-reloc;
+ 800x480 {
+ clock-frequency = <33260000>;
+ hactive = <800>;
+ vactive = <480>;
+ hsync-len = <5>;
+ hfront-porch = <128>;
+ hback-porch = <0>;
+ vfront-porch = <23>;
+ vback-porch = <22>;
+ vsync-len = <5>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
adc0: adc at fc034000 {
pinctrl-names = "default";
pinctrl-0 = <
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index abc79d9637..b4967f9203 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -192,6 +192,7 @@ config TARGET_SAMA5D4EK
select SAMA5D4
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
config TARGET_MA5D4EVK
bool "Aries MA5D4EVK Evaluation Kit"
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index ee07038e2e..48c43f0163 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -14,11 +14,7 @@
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
-#include <atmel_hlcdc.h>
#include <debug_uart.h>
-#include <lcd.h>
-#include <nand.h>
-#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -74,93 +70,15 @@ static void sama5d4ek_usb_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 800,
- .vl_row = 480,
- .vl_clk = 33260000,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_hsync_len = 5,
- .vl_left_margin = 128,
- .vl_right_margin = 0,
- .vl_vsync_len = 5,
- .vl_upper_margin = 23,
- .vl_lower_margin = 22,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void) { /* Empty! */ }
-void lcd_disable(void) { /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
{
- return 1;
-}
-
-static void sama5d4ek_lcd_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("2014 ATMEL Corp\n");
- lcd_printf("at91 at atmel.com\n");
- lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
-
- nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += get_nand_dev_by_index(i)->size;
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
#endif
- lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20, nand_size >> 20);
+ return 0;
}
-#endif /* CONFIG_LCD_INFO */
-
-#endif /* CONFIG_LCD */
+#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void sama5d4ek_serial3_hw_init(void)
@@ -196,9 +114,6 @@ int board_init(void)
#ifdef CONFIG_NAND_ATMEL
sama5d4ek_nand_hw_init();
#endif
-#ifdef CONFIG_LCD
- sama5d4ek_lcd_hw_init();
-#endif
#ifdef CONFIG_CMD_USB
sama5d4ek_usb_hw_init();
#endif
diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig
index aaa5855b22..7367b6cb7a 100644
--- a/configs/sama5d4ek_mmc_defconfig
+++ b/configs/sama5d4ek_mmc_defconfig
@@ -78,4 +78,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig
index 901d17bfa3..94970c6e7f 100644
--- a/configs/sama5d4ek_nandflash_defconfig
+++ b/configs/sama5d4ek_nandflash_defconfig
@@ -75,4 +75,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig
index 535031024b..160ed127bd 100644
--- a/configs/sama5d4ek_spiflash_defconfig
+++ b/configs/sama5d4ek_spiflash_defconfig
@@ -74,4 +74,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index 94e8e893c0..a46e3508bf 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -45,15 +45,6 @@
#define CONFIG_ATMEL_NAND_HW_PMECC
#endif
-/* LCD */
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 18
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x200000
--
2.13.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v3 4/5] board: sama5d4_xplained: Convert to CONFIG_DM_VIDEO
2017-09-18 7:25 [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Wenyou Yang
` (2 preceding siblings ...)
2017-09-18 7:25 ` [U-Boot] [PATCH v3 3/5] board: sama5d4ek: " Wenyou Yang
@ 2017-09-18 7:26 ` Wenyou Yang
2017-09-18 7:26 ` [U-Boot] [PATCH v3 5/5] board: at91sam9x5ek: " Wenyou Yang
2017-09-29 16:13 ` [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Anatolij Gustschin
5 siblings, 0 replies; 7+ messages in thread
From: Wenyou Yang @ 2017-09-18 7:26 UTC (permalink / raw)
To: u-boot
From: Wenyou Yang <wenyou.yang@atmel.com>
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
Changes in v3: None
Changes in v2: None
arch/arm/dts/at91-sama5d4_xplained.dts | 25 ++++++
arch/arm/dts/sama5d4.dtsi | 21 +----
arch/arm/mach-at91/Kconfig | 1 +
board/atmel/common/video_display.c | 2 +-
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 102 ++----------------------
configs/sama5d4_xplained_mmc_defconfig | 2 +
configs/sama5d4_xplained_nandflash_defconfig | 2 +
configs/sama5d4_xplained_spiflash_defconfig | 2 +
include/configs/sama5d4_xplained.h | 11 ---
9 files changed, 40 insertions(+), 128 deletions(-)
diff --git a/arch/arm/dts/at91-sama5d4_xplained.dts b/arch/arm/dts/at91-sama5d4_xplained.dts
index 0592b31b91..ea35dc21b6 100644
--- a/arch/arm/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/dts/at91-sama5d4_xplained.dts
@@ -74,6 +74,31 @@
ahb {
apb {
+ hlcdc: hlcdc at f0000000 {
+ atmel,vl-bpix = <4>;
+ atmel,guard-time = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ display-timings {
+ u-boot,dm-pre-reloc;
+ 480x272 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ hback-porch = <2>;
+ vfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <11>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
spi0: spi at f8010000 {
u-boot,dm-pre-reloc;
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
diff --git a/arch/arm/dts/sama5d4.dtsi b/arch/arm/dts/sama5d4.dtsi
index c6512ae437..8072b8a4f2 100644
--- a/arch/arm/dts/sama5d4.dtsi
+++ b/arch/arm/dts/sama5d4.dtsi
@@ -320,31 +320,12 @@
u-boot,dm-pre-reloc;
hlcdc: hlcdc at f0000000 {
- compatible = "atmel,sama5d4-hlcdc";
+ compatible = "atmel,at91sam9x5-hlcdc";
reg = <0xf0000000 0x4000>;
interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
};
dma1: dma-controller at f0004000 {
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b4967f9203..ebd865ab5b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -186,6 +186,7 @@ config TARGET_SAMA5D4_XPLAINED
select SAMA5D4
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
config TARGET_SAMA5D4EK
bool "SAMA5D4 Evaluation Kit"
diff --git a/board/atmel/common/video_display.c b/board/atmel/common/video_display.c
index 39ad619819..b20abc7386 100644
--- a/board/atmel/common/video_display.c
+++ b/board/atmel/common/video_display.c
@@ -43,7 +43,7 @@ int at91_video_show_board_info(void)
nand_size = 0;
#ifdef CONFIG_NAND_ATMEL
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i]->size;
+ nand_size += get_nand_dev_by_index(i)->size;
#endif
len += sprintf(&buf[len], "%ld MB SDRAM, %ld MB NAND\n",
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 9236a28549..78eddb8beb 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -14,11 +14,7 @@
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
-#include <atmel_hlcdc.h>
#include <debug_uart.h>
-#include <lcd.h>
-#include <nand.h>
-#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -73,98 +69,15 @@ static void sama5d4_xplained_usb_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 480,
- .vl_row = 272,
- .vl_clk = 9000000,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_hsync_len = 41,
- .vl_left_margin = 2,
- .vl_right_margin = 2,
- .vl_vsync_len = 11,
- .vl_upper_margin = 2,
- .vl_lower_margin = 2,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void) { /* Empty! */ }
-void lcd_disable(void) { /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
{
- return 1;
-}
-
-static void sama5d4_xplained_lcd_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("2014 ATMEL Corp\n");
- lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
-
- nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += get_nand_dev_by_index(i)->size;
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
#endif
- lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20, nand_size >> 20);
+ return 0;
}
-#endif /* CONFIG_LCD_INFO */
-
-#endif /* CONFIG_LCD */
+#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void sama5d4_xplained_serial3_hw_init(void)
@@ -212,9 +125,6 @@ int board_init(void)
#ifdef CONFIG_NAND_ATMEL
sama5d4_xplained_nand_hw_init();
#endif
-#ifdef CONFIG_LCD
- sama5d4_xplained_lcd_hw_init();
-#endif
#ifdef CONFIG_CMD_USB
sama5d4_xplained_usb_hw_init();
#endif
diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig
index dabbf605c5..8ecba5b7d4 100644
--- a/configs/sama5d4_xplained_mmc_defconfig
+++ b/configs/sama5d4_xplained_mmc_defconfig
@@ -78,3 +78,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig
index 85157878cd..bd3131f4cc 100644
--- a/configs/sama5d4_xplained_nandflash_defconfig
+++ b/configs/sama5d4_xplained_nandflash_defconfig
@@ -75,3 +75,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig
index 4061720b3a..d37be67eb6 100644
--- a/configs/sama5d4_xplained_spiflash_defconfig
+++ b/configs/sama5d4_xplained_spiflash_defconfig
@@ -77,3 +77,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 5dc5e7dd0c..6aa4bcc5c5 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -47,17 +47,6 @@
#define CONFIG_ATMEL_NAND_HW_PMECC
#endif
-/* LCD */
-#ifdef CONFIG_LCD
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#endif
-
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x200000
--
2.13.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v3 5/5] board: at91sam9x5ek: Convert to CONFIG_DM_VIDEO
2017-09-18 7:25 [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Wenyou Yang
` (3 preceding siblings ...)
2017-09-18 7:26 ` [U-Boot] [PATCH v3 4/5] board: sama5d4_xplained: " Wenyou Yang
@ 2017-09-18 7:26 ` Wenyou Yang
2017-09-29 16:13 ` [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Anatolij Gustschin
5 siblings, 0 replies; 7+ messages in thread
From: Wenyou Yang @ 2017-09-18 7:26 UTC (permalink / raw)
To: u-boot
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
Changes in v3:
- Collect the Reviewed-by tags.
Changes in v2:
- Rebase the u-boot/master (5541543f686).
- Drop the applied patches.
- Improve the commit log.
arch/arm/mach-at91/Kconfig | 1 +
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 111 ++-----------------------------
configs/at91sam9x5ek_dataflash_defconfig | 3 +-
configs/at91sam9x5ek_mmc_defconfig | 3 +-
configs/at91sam9x5ek_nandflash_defconfig | 3 +-
configs/at91sam9x5ek_spiflash_defconfig | 3 +-
include/configs/at91sam9x5ek.h | 10 ---
7 files changed, 16 insertions(+), 118 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index ebd865ab5b..7e85b69679 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -141,6 +141,7 @@ config TARGET_AT91SAM9X5EK
select AT91SAM9X5
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
config TARGET_SAMA5D2_PTC
bool "SAMA5D2 PTC board"
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index be6dd4a6d3..d69831ad15 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -13,12 +13,6 @@
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <debug_uart.h>
-#include <lcd.h>
-#include <atmel_hlcdc.h>
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-#endif
#include <asm/mach-types.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -86,103 +80,15 @@ static void at91sam9x5ek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 800,
- .vl_row = 480,
- .vl_clk = 24000000,
- .vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_clk_pol = 1,
- .vl_hsync_len = 128,
- .vl_left_margin = 64,
- .vl_right_margin = 64,
- .vl_vsync_len = 2,
- .vl_upper_margin = 22,
- .vl_lower_margin = 21,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
- if (has_lcdc())
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */
-}
-
-void lcd_disable(void)
-{
- if (has_lcdc())
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */
-}
-
-static void at91sam9x5ek_lcd_hw_init(void)
-{
- if (has_lcdc()) {
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
- }
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- if (has_lcdc()) {
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("(C) 2012 ATMEL Corp\n");
- lcd_printf("at91support at atmel.com\n");
- lcd_printf("%s CPU at %s MHz\n",
- get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += get_nand_dev_by_index(i)->size;
- lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20,
- nand_size >> 20);
- }
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
+#endif
+ return 0;
}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
+#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
@@ -216,9 +122,6 @@ int board_init(void)
#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI_HCD)
at91_uhp_hw_init();
#endif
-#ifdef CONFIG_LCD
- at91sam9x5ek_lcd_hw_init();
-#endif
return 0;
}
diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig
index 9d61dd8de0..c417eb8c10 100644
--- a/configs/at91sam9x5ek_dataflash_defconfig
+++ b/configs/at91sam9x5ek_dataflash_defconfig
@@ -60,4 +60,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig
index 9fa4801480..e0a24a5b48 100644
--- a/configs/at91sam9x5ek_mmc_defconfig
+++ b/configs/at91sam9x5ek_mmc_defconfig
@@ -60,4 +60,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
index b28bec7f0b..0e8c07f609 100644
--- a/configs/at91sam9x5ek_nandflash_defconfig
+++ b/configs/at91sam9x5ek_nandflash_defconfig
@@ -60,4 +60,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig
index 838d8a0ad7..70e96ecc2f 100644
--- a/configs/at91sam9x5ek_spiflash_defconfig
+++ b/configs/at91sam9x5ek_spiflash_defconfig
@@ -60,4 +60,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 1d4971c59f..9450784521 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -23,16 +23,6 @@
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
-/* LCD */
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
-
/*
* BOOTP options
*/
--
2.13.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model
2017-09-18 7:25 [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Wenyou Yang
` (4 preceding siblings ...)
2017-09-18 7:26 ` [U-Boot] [PATCH v3 5/5] board: at91sam9x5ek: " Wenyou Yang
@ 2017-09-29 16:13 ` Anatolij Gustschin
5 siblings, 0 replies; 7+ messages in thread
From: Anatolij Gustschin @ 2017-09-29 16:13 UTC (permalink / raw)
To: u-boot
On Mon, 18 Sep 2017 15:25:56 +0800
Wenyou Yang wenyou.yang at microchip.com wrote:
> Convert the boards to support the driver model of LCD/video via
> enabling CONFIG_DM_VIDEO, remove CONFIG_LCD and the unnecessary code.
>
> Changes in v3:
> - Collect the Reviewed-by tags.
Note that resubmitting with collected Reviewed-by tags is not
necessary, patchwork collects them automatically.
Series applied to u-boot-video/master, thanks!
--
Anatolij
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2017-09-29 16:13 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-09-18 7:25 [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Wenyou Yang
2017-09-18 7:25 ` [U-Boot] [PATCH v3 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO Wenyou Yang
2017-09-18 7:25 ` [U-Boot] [PATCH v3 2/5] board: sama5d3xek: " Wenyou Yang
2017-09-18 7:25 ` [U-Boot] [PATCH v3 3/5] board: sama5d4ek: " Wenyou Yang
2017-09-18 7:26 ` [U-Boot] [PATCH v3 4/5] board: sama5d4_xplained: " Wenyou Yang
2017-09-18 7:26 ` [U-Boot] [PATCH v3 5/5] board: at91sam9x5ek: " Wenyou Yang
2017-09-29 16:13 ` [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model Anatolij Gustschin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.