All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: Oleksij Rempel <linux@rempel-privat.de>
Cc: barebox@lists.infradead.org
Subject: Re: [RFC v4 08/10] RISC-V: add erizo_generic_defconfig
Date: Sat, 30 Sep 2017 15:38:59 +0300	[thread overview]
Message-ID: <20170930153859.7d7d44ddae692b3d46a90c1a@gmail.com> (raw)
In-Reply-To: <a483bc68-8d0a-7d27-377e-e1941ddc4161@rempel-privat.de>

On Fri, 29 Sep 2017 14:29:21 +0200
Oleksij Rempel <linux@rempel-privat.de> wrote:

> Am 29.09.2017 um 01:12 schrieb Antony Pavlov:
> > Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> > ---
> >  arch/riscv/configs/erizo_generic_defconfig | 55 ++++++++++++++++++++++++++++++
> >  1 file changed, 55 insertions(+)
> > 
> > diff --git a/arch/riscv/configs/erizo_generic_defconfig b/arch/riscv/configs/erizo_generic_defconfig
> > new file mode 100644
> > index 000000000..8ccad8934
> > --- /dev/null
> > +++ b/arch/riscv/configs/erizo_generic_defconfig
> > @@ -0,0 +1,55 @@
> > +CONFIG_32BIT=y
> > +CONFIG_BUILTIN_DTB=y
> > +CONFIG_BUILTIN_DTB_NAME="erizo_generic"
> > +# CONFIG_GLOBALVAR is not set
> > +CONFIG_TEXT_BASE=0x80000000
> > +CONFIG_MEMORY_LAYOUT_FIXED=y
> > +CONFIG_STACK_BASE=0x800e0000
> > +CONFIG_STACK_SIZE=0x20000
> > +CONFIG_MALLOC_BASE=0x80100000
> > +CONFIG_MALLOC_SIZE=0x100000
> > +CONFIG_MALLOC_TLSF=y
> > +CONFIG_PANIC_HANG=y
> > +CONFIG_HUSH_FANCY_PROMPT=y
> > +CONFIG_CMDLINE_EDITING=y
> > +CONFIG_AUTO_COMPLETE=y
> > +# CONFIG_ERRNO_MESSAGES is not set
> > +# CONFIG_TIMESTAMP is not set
> > +# CONFIG_BOOTM is not set
> > +# CONFIG_ENV_HANDLING is not set
> > +CONFIG_POLLER=y
> > +CONFIG_DEBUG_LL=y
> > +CONFIG_LONGHELP=y
> > +CONFIG_CMD_IOMEM=y
> > +CONFIG_CMD_IMD=y
> > +CONFIG_CMD_MEMINFO=y
> > +CONFIG_CMD_GO=y
> > +CONFIG_CMD_LOADY=y
> > +CONFIG_CMD_CMP=y
> > +CONFIG_CMD_MD5SUM=y
> > +CONFIG_CMD_SHA1SUM=y
> > +CONFIG_CMD_MSLEEP=y
> > +CONFIG_CMD_SLEEP=y
> > +CONFIG_CMD_MEMTEST=y
> > +CONFIG_CMD_MM=y
> > +CONFIG_CMD_FLASH=y
> > +CONFIG_CMD_GPIO=y
> > +CONFIG_CMD_I2C=y
> > +CONFIG_CMD_SPI=y
> > +CONFIG_CMD_OF_DUMP=y
> > +CONFIG_CMD_TIME=y
> > +CONFIG_CMD_DHRYSTONE=y
> > +CONFIG_OFDEVICE=y
> > +CONFIG_DRIVER_SERIAL_NS16550=y
> > +CONFIG_DRIVER_SPI_GPIO=y
> > +CONFIG_I2C=y
> > +CONFIG_I2C_GPIO=y
> > +CONFIG_MTD=y
> > +# CONFIG_MTD_OOB_DEVICE is not set
> > +CONFIG_MTD_M25P80=y
> > +CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
> > +CONFIG_EEPROM_AT25=y
> > +CONFIG_EEPROM_AT24=y
> 
> hm... none of it seems to be in devicetree. Do you need this eeproms?

My bad! These options used in development branch.

In my RICS-V TODO list I have the 'add support for Opencores I2C and SPI IP-blocks' record.

At the moment I work on testing bitbanged SPI and I2C on real FPGA boards.
Next I will try to use Opencores I2C and SPI IP-blocks instead of GPIO bitbang.

> 
> > +CONFIG_GPIO_GENERIC_PLATFORM=y
> > +# CONFIG_PINCTRL is not set
> > +CONFIG_DIGEST_CRC32_GENERIC=y
> > 

-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2017-09-30 12:27 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-28 23:12 [RFC v4 00/10] add initial RISC-V architecture support Antony Pavlov
2017-09-28 23:12 ` [RFC v4 01/10] Add " Antony Pavlov
2017-09-29 12:07   ` Oleksij Rempel
2017-09-30 11:57     ` Antony Pavlov
2017-10-02  7:43       ` Oleksij Rempel
2017-10-02 14:08         ` Antony Pavlov
2017-10-02 10:04       ` Daniel Schultz
2017-10-02 22:15         ` Antony Pavlov
2017-10-02 10:08     ` Daniel Schultz
2017-10-02 22:21       ` Antony Pavlov
2017-10-05 10:55         ` Daniel Schultz
2017-10-06 15:39           ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 02/10] RISC-V: add Erizo SoC support Antony Pavlov
2017-09-29 12:18   ` Oleksij Rempel
2017-09-30 12:05     ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 03/10] RISC-V: add low-level debug macros for ns16550 Antony Pavlov
2017-09-28 23:12 ` [RFC v4 04/10] RISC-V: add nmon nano-monitor Antony Pavlov
2017-09-29 12:26   ` Oleksij Rempel
2017-09-30 12:22     ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 05/10] RISC-V: erizo: add DEBUG_LL support Antony Pavlov
2017-09-28 23:12 ` [RFC v4 06/10] RISC-V: erizo: enable NMON Antony Pavlov
2017-09-28 23:12 ` [RFC v4 07/10] RISC-V: erizo: add nmon image creation Antony Pavlov
2017-09-28 23:12 ` [RFC v4 08/10] RISC-V: add erizo_generic_defconfig Antony Pavlov
2017-09-29 12:29   ` Oleksij Rempel
2017-09-30 12:38     ` Antony Pavlov [this message]
2017-09-28 23:12 ` [RFC v4 09/10] scripts: add nmon-loader Antony Pavlov
2017-09-28 23:12 ` [RFC v4 10/10] Documentation: add RISC-V docs Antony Pavlov
2017-09-29 12:35   ` Oleksij Rempel
2017-09-30 12:34     ` Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170930153859.7d7d44ddae692b3d46a90c1a@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=linux@rempel-privat.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.