* [Qemu-devel] [PATCH v5 0/7] Generalize MDIO framework
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Grant Likely, Jason Wang, Stefan Hajnoczi,
Edgar E. Iglesias, Alistair Francis
Cc: Philippe Mathieu-Daudé, qemu-devel, qemu-arm
Hi,
I have a follow up series using multiples PHY on the MDIO bus based on this
series.
Regards,
Phil.
Grant's previous work:
http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg00257.html
"There is more work to be done, particularly in moving to the common GPIO api,
but that work can be done as a follow on patch series."
Grant Likely (7):
hw/mdio: Generalize etraxfs MDIO bitbanging emulation
hw/mdio: Add PHY register definition
hw/mdio: Generalize phy initialization routine
hw/mdio: Mask out read-only bits.
hw/mdio: Refactor bitbanging state machine
hw/mdio: Add VMState support
hw/mdio: Use bitbang core for smc91c111 network device
include/hw/net/mdio.h | 124 +++++++++++++++++++++
hw/net/etraxfs_eth.c | 291 +-----------------------------------------------
hw/net/mdio.c | 280 ++++++++++++++++++++++++++++++++++++++++++++++
hw/net/smc91c111.c | 27 ++++-
hw/net/xilinx_axienet.c | 189 +------------------------------
hw/net/Makefile.objs | 2 +
6 files changed, 438 insertions(+), 475 deletions(-)
create mode 100644 include/hw/net/mdio.h
create mode 100644 hw/net/mdio.c
--
2.14.1
^ permalink raw reply [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v5 1/7] hw/mdio: Generalize etraxfs MDIO bitbanging emulation
2017-09-22 17:13 ` [Qemu-devel] " Philippe Mathieu-Daudé
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
-1 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Grant Likely, Jason Wang, Edgar E. Iglesias,
Alistair Francis, Fam Zheng, Andreas Färber
Cc: qemu-arm, qemu-devel, Philippe Mathieu-Daudé
From: Grant Likely <grant.likely@arm.com>
The etraxfs and Xilinx axienet Ethernet models implement quite a nice
MDIO core that supports both bitbanging and direct register access. This
change factors the common code out into a separate file. There are no
functional changes here, just movement of code.
The etraxfs and axienet are slightly different. The etraxfs version
includes the bitbang state processing, but the axienet version has a
minor enhancement for read/write of phy registers without using bitbang
state variables. This patch generalizes the etraxfs version, with the
axienet change backported in.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: rebased with a minor checkpatch fix]
---
include/hw/net/mdio.h | 76 +++++++++++++
hw/net/etraxfs_eth.c | 278 +-----------------------------------------------
hw/net/mdio.c | 262 +++++++++++++++++++++++++++++++++++++++++++++
hw/net/xilinx_axienet.c | 187 +-------------------------------
hw/net/Makefile.objs | 2 +
5 files changed, 344 insertions(+), 461 deletions(-)
create mode 100644 include/hw/net/mdio.h
create mode 100644 hw/net/mdio.c
diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
new file mode 100644
index 0000000000..ac36aed3c3
--- /dev/null
+++ b/include/hw/net/mdio.h
@@ -0,0 +1,76 @@
+#ifndef BITBANG_MDIO_H
+#define BITBANG_MDIO_H
+
+/*
+ * QEMU Bitbang Ethernet MDIO bus & PHY controllers.
+ *
+ * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* PHY Advertisement control register */
+#define PHY_ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define PHY_ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define PHY_ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define PHY_ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+
+struct qemu_phy {
+ uint32_t regs[32];
+
+ int link;
+
+ unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
+ void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
+};
+
+struct qemu_mdio {
+ /* bus. */
+ int mdc;
+ int mdio;
+
+ /* decoder. */
+ enum {
+ PREAMBLE,
+ SOF,
+ OPC,
+ ADDR,
+ REQ,
+ TURNAROUND,
+ DATA
+ } state;
+ unsigned int drive;
+
+ unsigned int cnt;
+ unsigned int addr;
+ unsigned int opc;
+ unsigned int req;
+ unsigned int data;
+
+ struct qemu_phy *devs[32];
+};
+
+void tdk_init(struct qemu_phy *phy);
+void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
+ unsigned int addr);
+uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
+void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req, uint16_t data);
+void mdio_cycle(struct qemu_mdio *bus);
+
+#endif
diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
index 013c8d0a41..f8d8f8441d 100644
--- a/hw/net/etraxfs_eth.c
+++ b/hw/net/etraxfs_eth.c
@@ -26,287 +26,11 @@
#include "hw/sysbus.h"
#include "net/net.h"
#include "hw/cris/etraxfs.h"
+#include "hw/net/mdio.h"
#include "qemu/error-report.h"
#define D(x)
-/* Advertisement control register. */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-
-/*
- * The MDIO extensions in the TDK PHY model were reversed engineered from the
- * linux driver (PHYID and Diagnostics reg).
- * TODO: Add friendly names for the register nums.
- */
-struct qemu_phy
-{
- uint32_t regs[32];
-
- int link;
-
- unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
- void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
-};
-
-static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
-{
- int regnum;
- unsigned r = 0;
-
- regnum = req & 0x1f;
-
- switch (regnum) {
- case 1:
- if (!phy->link) {
- break;
- }
- /* MR1. */
- /* Speeds and modes. */
- r |= (1 << 13) | (1 << 14);
- r |= (1 << 11) | (1 << 12);
- r |= (1 << 5); /* Autoneg complete. */
- r |= (1 << 3); /* Autoneg able. */
- r |= (1 << 2); /* link. */
- break;
- case 5:
- /* Link partner ability.
- We are kind; always agree with whatever best mode
- the guest advertises. */
- r = 1 << 14; /* Success. */
- /* Copy advertised modes. */
- r |= phy->regs[4] & (15 << 5);
- /* Autoneg support. */
- r |= 1;
- break;
- case 18:
- {
- /* Diagnostics reg. */
- int duplex = 0;
- int speed_100 = 0;
-
- if (!phy->link) {
- break;
- }
-
- /* Are we advertising 100 half or 100 duplex ? */
- speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
- speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
-
- /* Are we advertising 10 duplex or 100 duplex ? */
- duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
- duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
- r = (speed_100 << 10) | (duplex << 11);
- }
- break;
-
- default:
- r = phy->regs[regnum];
- break;
- }
- D(printf("\n%s %x = reg[%d]\n", __func__, r, regnum));
- return r;
-}
-
-static void
-tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
-{
- int regnum;
-
- regnum = req & 0x1f;
- D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
- switch (regnum) {
- default:
- phy->regs[regnum] = data;
- break;
- }
-}
-
-static void
-tdk_init(struct qemu_phy *phy)
-{
- phy->regs[0] = 0x3100;
- /* PHY Id. */
- phy->regs[2] = 0x0300;
- phy->regs[3] = 0xe400;
- /* Autonegotiation advertisement reg. */
- phy->regs[4] = 0x01E1;
- phy->link = 1;
-
- phy->read = tdk_read;
- phy->write = tdk_write;
-}
-
-struct qemu_mdio
-{
- /* bus. */
- int mdc;
- int mdio;
-
- /* decoder. */
- enum {
- PREAMBLE,
- SOF,
- OPC,
- ADDR,
- REQ,
- TURNAROUND,
- DATA
- } state;
- unsigned int drive;
-
- unsigned int cnt;
- unsigned int addr;
- unsigned int opc;
- unsigned int req;
- unsigned int data;
-
- struct qemu_phy *devs[32];
-};
-
-static void
-mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
-{
- bus->devs[addr & 0x1f] = phy;
-}
-
-#ifdef USE_THIS_DEAD_CODE
-static void
-mdio_detach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
-{
- bus->devs[addr & 0x1f] = NULL;
-}
-#endif
-
-static void mdio_read_req(struct qemu_mdio *bus)
-{
- struct qemu_phy *phy;
-
- phy = bus->devs[bus->addr];
- if (phy && phy->read) {
- bus->data = phy->read(phy, bus->req);
- } else {
- bus->data = 0xffff;
- }
-}
-
-static void mdio_write_req(struct qemu_mdio *bus)
-{
- struct qemu_phy *phy;
-
- phy = bus->devs[bus->addr];
- if (phy && phy->write) {
- phy->write(phy, bus->req, bus->data);
- }
-}
-
-static void mdio_cycle(struct qemu_mdio *bus)
-{
- bus->cnt++;
-
- D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
- bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
-#if 0
- if (bus->mdc) {
- printf("%d", bus->mdio);
- }
-#endif
- switch (bus->state) {
- case PREAMBLE:
- if (bus->mdc) {
- if (bus->cnt >= (32 * 2) && !bus->mdio) {
- bus->cnt = 0;
- bus->state = SOF;
- bus->data = 0;
- }
- }
- break;
- case SOF:
- if (bus->mdc) {
- if (bus->mdio != 1) {
- printf("WARNING: no SOF\n");
- }
- if (bus->cnt == 1*2) {
- bus->cnt = 0;
- bus->opc = 0;
- bus->state = OPC;
- }
- }
- break;
- case OPC:
- if (bus->mdc) {
- bus->opc <<= 1;
- bus->opc |= bus->mdio & 1;
- if (bus->cnt == 2*2) {
- bus->cnt = 0;
- bus->addr = 0;
- bus->state = ADDR;
- }
- }
- break;
- case ADDR:
- if (bus->mdc) {
- bus->addr <<= 1;
- bus->addr |= bus->mdio & 1;
-
- if (bus->cnt == 5*2) {
- bus->cnt = 0;
- bus->req = 0;
- bus->state = REQ;
- }
- }
- break;
- case REQ:
- if (bus->mdc) {
- bus->req <<= 1;
- bus->req |= bus->mdio & 1;
- if (bus->cnt == 5*2) {
- bus->cnt = 0;
- bus->state = TURNAROUND;
- }
- }
- break;
- case TURNAROUND:
- if (bus->mdc && bus->cnt == 2*2) {
- bus->mdio = 0;
- bus->cnt = 0;
-
- if (bus->opc == 2) {
- bus->drive = 1;
- mdio_read_req(bus);
- bus->mdio = bus->data & 1;
- }
- bus->state = DATA;
- }
- break;
- case DATA:
- if (!bus->mdc) {
- if (bus->drive) {
- bus->mdio = !!(bus->data & (1 << 15));
- bus->data <<= 1;
- }
- } else {
- if (!bus->drive) {
- bus->data <<= 1;
- bus->data |= bus->mdio;
- }
- if (bus->cnt == 16 * 2) {
- bus->cnt = 0;
- bus->state = PREAMBLE;
- if (!bus->drive) {
- mdio_write_req(bus);
- }
- bus->drive = 0;
- }
- }
- break;
- default:
- break;
- }
-}
-
/* ETRAX-FS Ethernet MAC block starts here. */
#define RW_MA0_LO 0x00
diff --git a/hw/net/mdio.c b/hw/net/mdio.c
new file mode 100644
index 0000000000..3763fcc8af
--- /dev/null
+++ b/hw/net/mdio.c
@@ -0,0 +1,262 @@
+/*
+ * QEMU Ethernet MDIO bus & PHY models
+ *
+ * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This is a generic MDIO implementation.
+ *
+ * TODO:
+ * - Split PHYs out as separate device models so they can be defined and
+ * instantiated separately from the MDIO bus.
+ * - Split out bitbang state machine into a separate model. Mostly this consists
+ * of the mdio_cycle() routine and the bitbang state data in struct qemu_mdio
+ * - Use the GPIO interface for driving bitbang
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/log.h"
+#include "hw/net/mdio.h"
+
+#define D(x)
+
+/*
+ * The MDIO extensions in the TDK PHY model were reversed engineered from the
+ * linux driver (PHYID and Diagnostics reg).
+ * TODO: Add friendly names for the register nums.
+ */
+static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
+{
+ int regnum;
+ unsigned r = 0;
+
+ regnum = req & 0x1f;
+
+ switch (regnum) {
+ case 1:
+ if (!phy->link) {
+ break;
+ }
+ /* MR1. */
+ /* Speeds and modes. */
+ r |= (1 << 13) | (1 << 14);
+ r |= (1 << 11) | (1 << 12);
+ r |= (1 << 5); /* Autoneg complete. */
+ r |= (1 << 3); /* Autoneg able. */
+ r |= (1 << 2); /* link. */
+ r |= (1 << 1); /* link. */
+ break;
+ case 5:
+ /* Link partner ability.
+ We are kind; always agree with whatever best mode
+ the guest advertises. */
+ r = 1 << 14; /* Success. */
+ /* Copy advertised modes. */
+ r |= phy->regs[4] & (15 << 5);
+ /* Autoneg support. */
+ r |= 1;
+ break;
+ case 17:
+ /* Marvel PHY on many xilinx boards. */
+ r = 0x8000; /* 1000Mb */
+ break;
+ case 18:
+ {
+ /* Diagnostics reg. */
+ int duplex = 0;
+ int speed_100 = 0;
+
+ if (!phy->link) {
+ break;
+ }
+
+ /* Are we advertising 100 half or 100 duplex ? */
+ speed_100 = !!(phy->regs[4] & PHY_ADVERTISE_100HALF);
+ speed_100 |= !!(phy->regs[4] & PHY_ADVERTISE_100FULL);
+
+ /* Are we advertising 10 duplex or 100 duplex ? */
+ duplex = !!(phy->regs[4] & PHY_ADVERTISE_100FULL);
+ duplex |= !!(phy->regs[4] & PHY_ADVERTISE_10FULL);
+ r = (speed_100 << 10) | (duplex << 11);
+ }
+ break;
+
+ default:
+ r = phy->regs[regnum];
+ break;
+ }
+ D(printf("\n%s %x = reg[%d]\n", __func__, r, regnum));
+ return r;
+}
+
+static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
+{
+ int regnum;
+
+ regnum = req & 0x1f;
+ D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
+ switch (regnum) {
+ default:
+ phy->regs[regnum] = data;
+ break;
+ }
+}
+
+void tdk_init(struct qemu_phy *phy)
+{
+ phy->regs[0] = 0x3100;
+ /* PHY Id. */
+ phy->regs[2] = 0x0300;
+ phy->regs[3] = 0xe400;
+ /* Autonegotiation advertisement reg. */
+ phy->regs[4] = 0x01e1;
+ phy->link = 1;
+
+ phy->read = tdk_read;
+ phy->write = tdk_write;
+}
+
+void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
+{
+ bus->devs[addr & 0x1f] = phy;
+}
+
+uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req)
+{
+ struct qemu_phy *phy;
+
+ phy = bus->devs[bus->addr];
+ if (phy && phy->read) {
+ return phy->read(phy, req);
+ }
+ return 0xffff;
+}
+
+void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req,
+ uint16_t data)
+{
+ struct qemu_phy *phy;
+
+ phy = bus->devs[bus->addr];
+ if (phy && phy->write) {
+ phy->write(phy, req, data);
+ }
+}
+
+void mdio_cycle(struct qemu_mdio *bus)
+{
+ bus->cnt++;
+
+ D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
+ bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
+ switch (bus->state) {
+ case PREAMBLE:
+ if (bus->mdc) {
+ if (bus->cnt >= (32 * 2) && !bus->mdio) {
+ bus->cnt = 0;
+ bus->state = SOF;
+ bus->data = 0;
+ }
+ }
+ break;
+ case SOF:
+ if (bus->mdc) {
+ if (bus->mdio != 1) {
+ printf("WARNING: no SOF\n");
+ }
+ if (bus->cnt == 1 * 2) {
+ bus->cnt = 0;
+ bus->opc = 0;
+ bus->state = OPC;
+ }
+ }
+ break;
+ case OPC:
+ if (bus->mdc) {
+ bus->opc <<= 1;
+ bus->opc |= bus->mdio & 1;
+ if (bus->cnt == 2 * 2) {
+ bus->cnt = 0;
+ bus->addr = 0;
+ bus->state = ADDR;
+ }
+ }
+ break;
+ case ADDR:
+ if (bus->mdc) {
+ bus->addr <<= 1;
+ bus->addr |= bus->mdio & 1;
+
+ if (bus->cnt == 5 * 2) {
+ bus->cnt = 0;
+ bus->req = 0;
+ bus->state = REQ;
+ }
+ }
+ break;
+ case REQ:
+ if (bus->mdc) {
+ bus->req <<= 1;
+ bus->req |= bus->mdio & 1;
+ if (bus->cnt == 5 * 2) {
+ bus->cnt = 0;
+ bus->state = TURNAROUND;
+ }
+ }
+ break;
+ case TURNAROUND:
+ if (bus->mdc && bus->cnt == 2 * 2) {
+ bus->mdio = 0;
+ bus->cnt = 0;
+
+ if (bus->opc == 2) {
+ bus->drive = 1;
+ bus->data = mdio_read_req(bus, bus->addr, bus->req);
+ bus->mdio = bus->data & 1;
+ }
+ bus->state = DATA;
+ }
+ break;
+ case DATA:
+ if (!bus->mdc) {
+ if (bus->drive) {
+ bus->mdio = !!(bus->data & (1 << 15));
+ bus->data <<= 1;
+ }
+ } else {
+ if (!bus->drive) {
+ bus->data <<= 1;
+ bus->data |= bus->mdio;
+ }
+ if (bus->cnt == 16 * 2) {
+ bus->cnt = 0;
+ bus->state = PREAMBLE;
+ if (!bus->drive) {
+ mdio_write_req(bus, bus->addr, bus->req, bus->data);
+ }
+ bus->drive = 0;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+}
diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
index d4c2c89dc1..1e859fdaae 100644
--- a/hw/net/xilinx_axienet.c
+++ b/hw/net/xilinx_axienet.c
@@ -26,13 +26,12 @@
#include "hw/sysbus.h"
#include "qapi/error.h"
#include "qemu/log.h"
+#include "hw/net/mdio.h"
#include "net/net.h"
#include "net/checksum.h"
#include "hw/stream.h"
-#define DPHY(x)
-
#define TYPE_XILINX_AXI_ENET "xlnx.axi-ethernet"
#define TYPE_XILINX_AXI_ENET_DATA_STREAM "xilinx-axienet-data-stream"
#define TYPE_XILINX_AXI_ENET_CONTROL_STREAM "xilinx-axienet-control-stream"
@@ -48,189 +47,9 @@
OBJECT_CHECK(XilinxAXIEnetStreamSlave, (obj),\
TYPE_XILINX_AXI_ENET_CONTROL_STREAM)
-/* Advertisement control register. */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-
#define CONTROL_PAYLOAD_WORDS 5
#define CONTROL_PAYLOAD_SIZE (CONTROL_PAYLOAD_WORDS * (sizeof(uint32_t)))
-struct PHY {
- uint32_t regs[32];
-
- int link;
-
- unsigned int (*read)(struct PHY *phy, unsigned int req);
- void (*write)(struct PHY *phy, unsigned int req,
- unsigned int data);
-};
-
-static unsigned int tdk_read(struct PHY *phy, unsigned int req)
-{
- int regnum;
- unsigned r = 0;
-
- regnum = req & 0x1f;
-
- switch (regnum) {
- case 1:
- if (!phy->link) {
- break;
- }
- /* MR1. */
- /* Speeds and modes. */
- r |= (1 << 13) | (1 << 14);
- r |= (1 << 11) | (1 << 12);
- r |= (1 << 5); /* Autoneg complete. */
- r |= (1 << 3); /* Autoneg able. */
- r |= (1 << 2); /* link. */
- r |= (1 << 1); /* link. */
- break;
- case 5:
- /* Link partner ability.
- We are kind; always agree with whatever best mode
- the guest advertises. */
- r = 1 << 14; /* Success. */
- /* Copy advertised modes. */
- r |= phy->regs[4] & (15 << 5);
- /* Autoneg support. */
- r |= 1;
- break;
- case 17:
- /* Marvell PHY on many xilinx boards. */
- r = 0x8000; /* 1000Mb */
- break;
- case 18:
- {
- /* Diagnostics reg. */
- int duplex = 0;
- int speed_100 = 0;
-
- if (!phy->link) {
- break;
- }
-
- /* Are we advertising 100 half or 100 duplex ? */
- speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
- speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
-
- /* Are we advertising 10 duplex or 100 duplex ? */
- duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
- duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
- r = (speed_100 << 10) | (duplex << 11);
- }
- break;
-
- default:
- r = phy->regs[regnum];
- break;
- }
- DPHY(qemu_log("\n%s %x = reg[%d]\n", __func__, r, regnum));
- return r;
-}
-
-static void
-tdk_write(struct PHY *phy, unsigned int req, unsigned int data)
-{
- int regnum;
-
- regnum = req & 0x1f;
- DPHY(qemu_log("%s reg[%d] = %x\n", __func__, regnum, data));
- switch (regnum) {
- default:
- phy->regs[regnum] = data;
- break;
- }
-
- /* Unconditionally clear regs[BMCR][BMCR_RESET] */
- phy->regs[0] &= ~0x8000;
-}
-
-static void
-tdk_init(struct PHY *phy)
-{
- phy->regs[0] = 0x3100;
- /* PHY Id. */
- phy->regs[2] = 0x0300;
- phy->regs[3] = 0xe400;
- /* Autonegotiation advertisement reg. */
- phy->regs[4] = 0x01E1;
- phy->link = 1;
-
- phy->read = tdk_read;
- phy->write = tdk_write;
-}
-
-struct MDIOBus {
- /* bus. */
- int mdc;
- int mdio;
-
- /* decoder. */
- enum {
- PREAMBLE,
- SOF,
- OPC,
- ADDR,
- REQ,
- TURNAROUND,
- DATA
- } state;
- unsigned int drive;
-
- unsigned int cnt;
- unsigned int addr;
- unsigned int opc;
- unsigned int req;
- unsigned int data;
-
- struct PHY *devs[32];
-};
-
-static void
-mdio_attach(struct MDIOBus *bus, struct PHY *phy, unsigned int addr)
-{
- bus->devs[addr & 0x1f] = phy;
-}
-
-#ifdef USE_THIS_DEAD_CODE
-static void
-mdio_detach(struct MDIOBus *bus, struct PHY *phy, unsigned int addr)
-{
- bus->devs[addr & 0x1f] = NULL;
-}
-#endif
-
-static uint16_t mdio_read_req(struct MDIOBus *bus, unsigned int addr,
- unsigned int reg)
-{
- struct PHY *phy;
- uint16_t data;
-
- phy = bus->devs[addr];
- if (phy && phy->read) {
- data = phy->read(phy, reg);
- } else {
- data = 0xffff;
- }
- DPHY(qemu_log("%s addr=%d reg=%d data=%x\n", __func__, addr, reg, data));
- return data;
-}
-
-static void mdio_write_req(struct MDIOBus *bus, unsigned int addr,
- unsigned int reg, uint16_t data)
-{
- struct PHY *phy;
-
- DPHY(qemu_log("%s addr=%d reg=%d data=%x\n", __func__, addr, reg, data));
- phy = bus->devs[addr];
- if (phy && phy->write) {
- phy->write(phy, reg, data);
- }
-}
-
#define DENET(x)
#define R_RAF (0x000 / 4)
@@ -322,8 +141,8 @@ enum {
/* Indirect registers. */
struct TEMAC {
- struct MDIOBus mdio_bus;
- struct PHY phy;
+ struct qemu_mdio mdio_bus;
+ struct qemu_phy phy;
void *parent;
};
diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
index 4171af0b5d..a020963d10 100644
--- a/hw/net/Makefile.objs
+++ b/hw/net/Makefile.objs
@@ -30,6 +30,8 @@ common-obj-$(CONFIG_SUNHME) += sunhme.o
common-obj-$(CONFIG_FTGMAC100) += ftgmac100.o
common-obj-$(CONFIG_SUNGEM) += sungem.o
+common-obj-y += mdio.o
+
obj-$(CONFIG_ETRAXFS) += etraxfs_eth.o
obj-$(CONFIG_COLDFIRE) += mcf_fec.o
obj-$(CONFIG_MILKYMIST) += milkymist-minimac2.o
--
2.14.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [Qemu-devel] [PATCH v5 1/7] hw/mdio: Generalize etraxfs MDIO bitbanging emulation
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Grant Likely, Jason Wang, Edgar E. Iglesias,
Alistair Francis, Fam Zheng, Andreas Färber
Cc: qemu-devel, qemu-arm, Philippe Mathieu-Daudé
From: Grant Likely <grant.likely@arm.com>
The etraxfs and Xilinx axienet Ethernet models implement quite a nice
MDIO core that supports both bitbanging and direct register access. This
change factors the common code out into a separate file. There are no
functional changes here, just movement of code.
The etraxfs and axienet are slightly different. The etraxfs version
includes the bitbang state processing, but the axienet version has a
minor enhancement for read/write of phy registers without using bitbang
state variables. This patch generalizes the etraxfs version, with the
axienet change backported in.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: rebased with a minor checkpatch fix]
---
include/hw/net/mdio.h | 76 +++++++++++++
hw/net/etraxfs_eth.c | 278 +-----------------------------------------------
hw/net/mdio.c | 262 +++++++++++++++++++++++++++++++++++++++++++++
hw/net/xilinx_axienet.c | 187 +-------------------------------
hw/net/Makefile.objs | 2 +
5 files changed, 344 insertions(+), 461 deletions(-)
create mode 100644 include/hw/net/mdio.h
create mode 100644 hw/net/mdio.c
diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
new file mode 100644
index 0000000000..ac36aed3c3
--- /dev/null
+++ b/include/hw/net/mdio.h
@@ -0,0 +1,76 @@
+#ifndef BITBANG_MDIO_H
+#define BITBANG_MDIO_H
+
+/*
+ * QEMU Bitbang Ethernet MDIO bus & PHY controllers.
+ *
+ * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* PHY Advertisement control register */
+#define PHY_ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define PHY_ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define PHY_ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define PHY_ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+
+struct qemu_phy {
+ uint32_t regs[32];
+
+ int link;
+
+ unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
+ void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
+};
+
+struct qemu_mdio {
+ /* bus. */
+ int mdc;
+ int mdio;
+
+ /* decoder. */
+ enum {
+ PREAMBLE,
+ SOF,
+ OPC,
+ ADDR,
+ REQ,
+ TURNAROUND,
+ DATA
+ } state;
+ unsigned int drive;
+
+ unsigned int cnt;
+ unsigned int addr;
+ unsigned int opc;
+ unsigned int req;
+ unsigned int data;
+
+ struct qemu_phy *devs[32];
+};
+
+void tdk_init(struct qemu_phy *phy);
+void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
+ unsigned int addr);
+uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
+void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req, uint16_t data);
+void mdio_cycle(struct qemu_mdio *bus);
+
+#endif
diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
index 013c8d0a41..f8d8f8441d 100644
--- a/hw/net/etraxfs_eth.c
+++ b/hw/net/etraxfs_eth.c
@@ -26,287 +26,11 @@
#include "hw/sysbus.h"
#include "net/net.h"
#include "hw/cris/etraxfs.h"
+#include "hw/net/mdio.h"
#include "qemu/error-report.h"
#define D(x)
-/* Advertisement control register. */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-
-/*
- * The MDIO extensions in the TDK PHY model were reversed engineered from the
- * linux driver (PHYID and Diagnostics reg).
- * TODO: Add friendly names for the register nums.
- */
-struct qemu_phy
-{
- uint32_t regs[32];
-
- int link;
-
- unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
- void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
-};
-
-static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
-{
- int regnum;
- unsigned r = 0;
-
- regnum = req & 0x1f;
-
- switch (regnum) {
- case 1:
- if (!phy->link) {
- break;
- }
- /* MR1. */
- /* Speeds and modes. */
- r |= (1 << 13) | (1 << 14);
- r |= (1 << 11) | (1 << 12);
- r |= (1 << 5); /* Autoneg complete. */
- r |= (1 << 3); /* Autoneg able. */
- r |= (1 << 2); /* link. */
- break;
- case 5:
- /* Link partner ability.
- We are kind; always agree with whatever best mode
- the guest advertises. */
- r = 1 << 14; /* Success. */
- /* Copy advertised modes. */
- r |= phy->regs[4] & (15 << 5);
- /* Autoneg support. */
- r |= 1;
- break;
- case 18:
- {
- /* Diagnostics reg. */
- int duplex = 0;
- int speed_100 = 0;
-
- if (!phy->link) {
- break;
- }
-
- /* Are we advertising 100 half or 100 duplex ? */
- speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
- speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
-
- /* Are we advertising 10 duplex or 100 duplex ? */
- duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
- duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
- r = (speed_100 << 10) | (duplex << 11);
- }
- break;
-
- default:
- r = phy->regs[regnum];
- break;
- }
- D(printf("\n%s %x = reg[%d]\n", __func__, r, regnum));
- return r;
-}
-
-static void
-tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
-{
- int regnum;
-
- regnum = req & 0x1f;
- D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
- switch (regnum) {
- default:
- phy->regs[regnum] = data;
- break;
- }
-}
-
-static void
-tdk_init(struct qemu_phy *phy)
-{
- phy->regs[0] = 0x3100;
- /* PHY Id. */
- phy->regs[2] = 0x0300;
- phy->regs[3] = 0xe400;
- /* Autonegotiation advertisement reg. */
- phy->regs[4] = 0x01E1;
- phy->link = 1;
-
- phy->read = tdk_read;
- phy->write = tdk_write;
-}
-
-struct qemu_mdio
-{
- /* bus. */
- int mdc;
- int mdio;
-
- /* decoder. */
- enum {
- PREAMBLE,
- SOF,
- OPC,
- ADDR,
- REQ,
- TURNAROUND,
- DATA
- } state;
- unsigned int drive;
-
- unsigned int cnt;
- unsigned int addr;
- unsigned int opc;
- unsigned int req;
- unsigned int data;
-
- struct qemu_phy *devs[32];
-};
-
-static void
-mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
-{
- bus->devs[addr & 0x1f] = phy;
-}
-
-#ifdef USE_THIS_DEAD_CODE
-static void
-mdio_detach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
-{
- bus->devs[addr & 0x1f] = NULL;
-}
-#endif
-
-static void mdio_read_req(struct qemu_mdio *bus)
-{
- struct qemu_phy *phy;
-
- phy = bus->devs[bus->addr];
- if (phy && phy->read) {
- bus->data = phy->read(phy, bus->req);
- } else {
- bus->data = 0xffff;
- }
-}
-
-static void mdio_write_req(struct qemu_mdio *bus)
-{
- struct qemu_phy *phy;
-
- phy = bus->devs[bus->addr];
- if (phy && phy->write) {
- phy->write(phy, bus->req, bus->data);
- }
-}
-
-static void mdio_cycle(struct qemu_mdio *bus)
-{
- bus->cnt++;
-
- D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
- bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
-#if 0
- if (bus->mdc) {
- printf("%d", bus->mdio);
- }
-#endif
- switch (bus->state) {
- case PREAMBLE:
- if (bus->mdc) {
- if (bus->cnt >= (32 * 2) && !bus->mdio) {
- bus->cnt = 0;
- bus->state = SOF;
- bus->data = 0;
- }
- }
- break;
- case SOF:
- if (bus->mdc) {
- if (bus->mdio != 1) {
- printf("WARNING: no SOF\n");
- }
- if (bus->cnt == 1*2) {
- bus->cnt = 0;
- bus->opc = 0;
- bus->state = OPC;
- }
- }
- break;
- case OPC:
- if (bus->mdc) {
- bus->opc <<= 1;
- bus->opc |= bus->mdio & 1;
- if (bus->cnt == 2*2) {
- bus->cnt = 0;
- bus->addr = 0;
- bus->state = ADDR;
- }
- }
- break;
- case ADDR:
- if (bus->mdc) {
- bus->addr <<= 1;
- bus->addr |= bus->mdio & 1;
-
- if (bus->cnt == 5*2) {
- bus->cnt = 0;
- bus->req = 0;
- bus->state = REQ;
- }
- }
- break;
- case REQ:
- if (bus->mdc) {
- bus->req <<= 1;
- bus->req |= bus->mdio & 1;
- if (bus->cnt == 5*2) {
- bus->cnt = 0;
- bus->state = TURNAROUND;
- }
- }
- break;
- case TURNAROUND:
- if (bus->mdc && bus->cnt == 2*2) {
- bus->mdio = 0;
- bus->cnt = 0;
-
- if (bus->opc == 2) {
- bus->drive = 1;
- mdio_read_req(bus);
- bus->mdio = bus->data & 1;
- }
- bus->state = DATA;
- }
- break;
- case DATA:
- if (!bus->mdc) {
- if (bus->drive) {
- bus->mdio = !!(bus->data & (1 << 15));
- bus->data <<= 1;
- }
- } else {
- if (!bus->drive) {
- bus->data <<= 1;
- bus->data |= bus->mdio;
- }
- if (bus->cnt == 16 * 2) {
- bus->cnt = 0;
- bus->state = PREAMBLE;
- if (!bus->drive) {
- mdio_write_req(bus);
- }
- bus->drive = 0;
- }
- }
- break;
- default:
- break;
- }
-}
-
/* ETRAX-FS Ethernet MAC block starts here. */
#define RW_MA0_LO 0x00
diff --git a/hw/net/mdio.c b/hw/net/mdio.c
new file mode 100644
index 0000000000..3763fcc8af
--- /dev/null
+++ b/hw/net/mdio.c
@@ -0,0 +1,262 @@
+/*
+ * QEMU Ethernet MDIO bus & PHY models
+ *
+ * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This is a generic MDIO implementation.
+ *
+ * TODO:
+ * - Split PHYs out as separate device models so they can be defined and
+ * instantiated separately from the MDIO bus.
+ * - Split out bitbang state machine into a separate model. Mostly this consists
+ * of the mdio_cycle() routine and the bitbang state data in struct qemu_mdio
+ * - Use the GPIO interface for driving bitbang
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/log.h"
+#include "hw/net/mdio.h"
+
+#define D(x)
+
+/*
+ * The MDIO extensions in the TDK PHY model were reversed engineered from the
+ * linux driver (PHYID and Diagnostics reg).
+ * TODO: Add friendly names for the register nums.
+ */
+static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
+{
+ int regnum;
+ unsigned r = 0;
+
+ regnum = req & 0x1f;
+
+ switch (regnum) {
+ case 1:
+ if (!phy->link) {
+ break;
+ }
+ /* MR1. */
+ /* Speeds and modes. */
+ r |= (1 << 13) | (1 << 14);
+ r |= (1 << 11) | (1 << 12);
+ r |= (1 << 5); /* Autoneg complete. */
+ r |= (1 << 3); /* Autoneg able. */
+ r |= (1 << 2); /* link. */
+ r |= (1 << 1); /* link. */
+ break;
+ case 5:
+ /* Link partner ability.
+ We are kind; always agree with whatever best mode
+ the guest advertises. */
+ r = 1 << 14; /* Success. */
+ /* Copy advertised modes. */
+ r |= phy->regs[4] & (15 << 5);
+ /* Autoneg support. */
+ r |= 1;
+ break;
+ case 17:
+ /* Marvel PHY on many xilinx boards. */
+ r = 0x8000; /* 1000Mb */
+ break;
+ case 18:
+ {
+ /* Diagnostics reg. */
+ int duplex = 0;
+ int speed_100 = 0;
+
+ if (!phy->link) {
+ break;
+ }
+
+ /* Are we advertising 100 half or 100 duplex ? */
+ speed_100 = !!(phy->regs[4] & PHY_ADVERTISE_100HALF);
+ speed_100 |= !!(phy->regs[4] & PHY_ADVERTISE_100FULL);
+
+ /* Are we advertising 10 duplex or 100 duplex ? */
+ duplex = !!(phy->regs[4] & PHY_ADVERTISE_100FULL);
+ duplex |= !!(phy->regs[4] & PHY_ADVERTISE_10FULL);
+ r = (speed_100 << 10) | (duplex << 11);
+ }
+ break;
+
+ default:
+ r = phy->regs[regnum];
+ break;
+ }
+ D(printf("\n%s %x = reg[%d]\n", __func__, r, regnum));
+ return r;
+}
+
+static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
+{
+ int regnum;
+
+ regnum = req & 0x1f;
+ D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
+ switch (regnum) {
+ default:
+ phy->regs[regnum] = data;
+ break;
+ }
+}
+
+void tdk_init(struct qemu_phy *phy)
+{
+ phy->regs[0] = 0x3100;
+ /* PHY Id. */
+ phy->regs[2] = 0x0300;
+ phy->regs[3] = 0xe400;
+ /* Autonegotiation advertisement reg. */
+ phy->regs[4] = 0x01e1;
+ phy->link = 1;
+
+ phy->read = tdk_read;
+ phy->write = tdk_write;
+}
+
+void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
+{
+ bus->devs[addr & 0x1f] = phy;
+}
+
+uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req)
+{
+ struct qemu_phy *phy;
+
+ phy = bus->devs[bus->addr];
+ if (phy && phy->read) {
+ return phy->read(phy, req);
+ }
+ return 0xffff;
+}
+
+void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req,
+ uint16_t data)
+{
+ struct qemu_phy *phy;
+
+ phy = bus->devs[bus->addr];
+ if (phy && phy->write) {
+ phy->write(phy, req, data);
+ }
+}
+
+void mdio_cycle(struct qemu_mdio *bus)
+{
+ bus->cnt++;
+
+ D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
+ bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
+ switch (bus->state) {
+ case PREAMBLE:
+ if (bus->mdc) {
+ if (bus->cnt >= (32 * 2) && !bus->mdio) {
+ bus->cnt = 0;
+ bus->state = SOF;
+ bus->data = 0;
+ }
+ }
+ break;
+ case SOF:
+ if (bus->mdc) {
+ if (bus->mdio != 1) {
+ printf("WARNING: no SOF\n");
+ }
+ if (bus->cnt == 1 * 2) {
+ bus->cnt = 0;
+ bus->opc = 0;
+ bus->state = OPC;
+ }
+ }
+ break;
+ case OPC:
+ if (bus->mdc) {
+ bus->opc <<= 1;
+ bus->opc |= bus->mdio & 1;
+ if (bus->cnt == 2 * 2) {
+ bus->cnt = 0;
+ bus->addr = 0;
+ bus->state = ADDR;
+ }
+ }
+ break;
+ case ADDR:
+ if (bus->mdc) {
+ bus->addr <<= 1;
+ bus->addr |= bus->mdio & 1;
+
+ if (bus->cnt == 5 * 2) {
+ bus->cnt = 0;
+ bus->req = 0;
+ bus->state = REQ;
+ }
+ }
+ break;
+ case REQ:
+ if (bus->mdc) {
+ bus->req <<= 1;
+ bus->req |= bus->mdio & 1;
+ if (bus->cnt == 5 * 2) {
+ bus->cnt = 0;
+ bus->state = TURNAROUND;
+ }
+ }
+ break;
+ case TURNAROUND:
+ if (bus->mdc && bus->cnt == 2 * 2) {
+ bus->mdio = 0;
+ bus->cnt = 0;
+
+ if (bus->opc == 2) {
+ bus->drive = 1;
+ bus->data = mdio_read_req(bus, bus->addr, bus->req);
+ bus->mdio = bus->data & 1;
+ }
+ bus->state = DATA;
+ }
+ break;
+ case DATA:
+ if (!bus->mdc) {
+ if (bus->drive) {
+ bus->mdio = !!(bus->data & (1 << 15));
+ bus->data <<= 1;
+ }
+ } else {
+ if (!bus->drive) {
+ bus->data <<= 1;
+ bus->data |= bus->mdio;
+ }
+ if (bus->cnt == 16 * 2) {
+ bus->cnt = 0;
+ bus->state = PREAMBLE;
+ if (!bus->drive) {
+ mdio_write_req(bus, bus->addr, bus->req, bus->data);
+ }
+ bus->drive = 0;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+}
diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
index d4c2c89dc1..1e859fdaae 100644
--- a/hw/net/xilinx_axienet.c
+++ b/hw/net/xilinx_axienet.c
@@ -26,13 +26,12 @@
#include "hw/sysbus.h"
#include "qapi/error.h"
#include "qemu/log.h"
+#include "hw/net/mdio.h"
#include "net/net.h"
#include "net/checksum.h"
#include "hw/stream.h"
-#define DPHY(x)
-
#define TYPE_XILINX_AXI_ENET "xlnx.axi-ethernet"
#define TYPE_XILINX_AXI_ENET_DATA_STREAM "xilinx-axienet-data-stream"
#define TYPE_XILINX_AXI_ENET_CONTROL_STREAM "xilinx-axienet-control-stream"
@@ -48,189 +47,9 @@
OBJECT_CHECK(XilinxAXIEnetStreamSlave, (obj),\
TYPE_XILINX_AXI_ENET_CONTROL_STREAM)
-/* Advertisement control register. */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-
#define CONTROL_PAYLOAD_WORDS 5
#define CONTROL_PAYLOAD_SIZE (CONTROL_PAYLOAD_WORDS * (sizeof(uint32_t)))
-struct PHY {
- uint32_t regs[32];
-
- int link;
-
- unsigned int (*read)(struct PHY *phy, unsigned int req);
- void (*write)(struct PHY *phy, unsigned int req,
- unsigned int data);
-};
-
-static unsigned int tdk_read(struct PHY *phy, unsigned int req)
-{
- int regnum;
- unsigned r = 0;
-
- regnum = req & 0x1f;
-
- switch (regnum) {
- case 1:
- if (!phy->link) {
- break;
- }
- /* MR1. */
- /* Speeds and modes. */
- r |= (1 << 13) | (1 << 14);
- r |= (1 << 11) | (1 << 12);
- r |= (1 << 5); /* Autoneg complete. */
- r |= (1 << 3); /* Autoneg able. */
- r |= (1 << 2); /* link. */
- r |= (1 << 1); /* link. */
- break;
- case 5:
- /* Link partner ability.
- We are kind; always agree with whatever best mode
- the guest advertises. */
- r = 1 << 14; /* Success. */
- /* Copy advertised modes. */
- r |= phy->regs[4] & (15 << 5);
- /* Autoneg support. */
- r |= 1;
- break;
- case 17:
- /* Marvell PHY on many xilinx boards. */
- r = 0x8000; /* 1000Mb */
- break;
- case 18:
- {
- /* Diagnostics reg. */
- int duplex = 0;
- int speed_100 = 0;
-
- if (!phy->link) {
- break;
- }
-
- /* Are we advertising 100 half or 100 duplex ? */
- speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
- speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
-
- /* Are we advertising 10 duplex or 100 duplex ? */
- duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
- duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
- r = (speed_100 << 10) | (duplex << 11);
- }
- break;
-
- default:
- r = phy->regs[regnum];
- break;
- }
- DPHY(qemu_log("\n%s %x = reg[%d]\n", __func__, r, regnum));
- return r;
-}
-
-static void
-tdk_write(struct PHY *phy, unsigned int req, unsigned int data)
-{
- int regnum;
-
- regnum = req & 0x1f;
- DPHY(qemu_log("%s reg[%d] = %x\n", __func__, regnum, data));
- switch (regnum) {
- default:
- phy->regs[regnum] = data;
- break;
- }
-
- /* Unconditionally clear regs[BMCR][BMCR_RESET] */
- phy->regs[0] &= ~0x8000;
-}
-
-static void
-tdk_init(struct PHY *phy)
-{
- phy->regs[0] = 0x3100;
- /* PHY Id. */
- phy->regs[2] = 0x0300;
- phy->regs[3] = 0xe400;
- /* Autonegotiation advertisement reg. */
- phy->regs[4] = 0x01E1;
- phy->link = 1;
-
- phy->read = tdk_read;
- phy->write = tdk_write;
-}
-
-struct MDIOBus {
- /* bus. */
- int mdc;
- int mdio;
-
- /* decoder. */
- enum {
- PREAMBLE,
- SOF,
- OPC,
- ADDR,
- REQ,
- TURNAROUND,
- DATA
- } state;
- unsigned int drive;
-
- unsigned int cnt;
- unsigned int addr;
- unsigned int opc;
- unsigned int req;
- unsigned int data;
-
- struct PHY *devs[32];
-};
-
-static void
-mdio_attach(struct MDIOBus *bus, struct PHY *phy, unsigned int addr)
-{
- bus->devs[addr & 0x1f] = phy;
-}
-
-#ifdef USE_THIS_DEAD_CODE
-static void
-mdio_detach(struct MDIOBus *bus, struct PHY *phy, unsigned int addr)
-{
- bus->devs[addr & 0x1f] = NULL;
-}
-#endif
-
-static uint16_t mdio_read_req(struct MDIOBus *bus, unsigned int addr,
- unsigned int reg)
-{
- struct PHY *phy;
- uint16_t data;
-
- phy = bus->devs[addr];
- if (phy && phy->read) {
- data = phy->read(phy, reg);
- } else {
- data = 0xffff;
- }
- DPHY(qemu_log("%s addr=%d reg=%d data=%x\n", __func__, addr, reg, data));
- return data;
-}
-
-static void mdio_write_req(struct MDIOBus *bus, unsigned int addr,
- unsigned int reg, uint16_t data)
-{
- struct PHY *phy;
-
- DPHY(qemu_log("%s addr=%d reg=%d data=%x\n", __func__, addr, reg, data));
- phy = bus->devs[addr];
- if (phy && phy->write) {
- phy->write(phy, reg, data);
- }
-}
-
#define DENET(x)
#define R_RAF (0x000 / 4)
@@ -322,8 +141,8 @@ enum {
/* Indirect registers. */
struct TEMAC {
- struct MDIOBus mdio_bus;
- struct PHY phy;
+ struct qemu_mdio mdio_bus;
+ struct qemu_phy phy;
void *parent;
};
diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
index 4171af0b5d..a020963d10 100644
--- a/hw/net/Makefile.objs
+++ b/hw/net/Makefile.objs
@@ -30,6 +30,8 @@ common-obj-$(CONFIG_SUNHME) += sunhme.o
common-obj-$(CONFIG_FTGMAC100) += ftgmac100.o
common-obj-$(CONFIG_SUNGEM) += sungem.o
+common-obj-y += mdio.o
+
obj-$(CONFIG_ETRAXFS) += etraxfs_eth.o
obj-$(CONFIG_COLDFIRE) += mcf_fec.o
obj-$(CONFIG_MILKYMIST) += milkymist-minimac2.o
--
2.14.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [Qemu-arm] [Qemu-devel] [PATCH v5 1/7] hw/mdio: Generalize etraxfs MDIO bitbanging emulation
2017-09-22 17:13 ` Philippe Mathieu-Daudé
@ 2018-02-27 22:30 ` Alistair Francis
-1 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2018-02-27 22:30 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Fam Zheng, Jason Wang,
qemu-devel@nongnu.org Developers, Alistair Francis, Grant Likely,
qemu-arm, Andreas Färber
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> From: Grant Likely <grant.likely@arm.com>
>
> The etraxfs and Xilinx axienet Ethernet models implement quite a nice
> MDIO core that supports both bitbanging and direct register access. This
> change factors the common code out into a separate file. There are no
> functional changes here, just movement of code.
>
> The etraxfs and axienet are slightly different. The etraxfs version
> includes the bitbang state processing, but the axienet version has a
> minor enhancement for read/write of phy registers without using bitbang
> state variables. This patch generalizes the etraxfs version, with the
> axienet change backported in.
>
> Signed-off-by: Grant Likely <grant.likely@arm.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> [PMD: rebased with a minor checkpatch fix]
> ---
> include/hw/net/mdio.h | 76 +++++++++++++
> hw/net/etraxfs_eth.c | 278 +-----------------------------------------------
> hw/net/mdio.c | 262 +++++++++++++++++++++++++++++++++++++++++++++
> hw/net/xilinx_axienet.c | 187 +-------------------------------
> hw/net/Makefile.objs | 2 +
> 5 files changed, 344 insertions(+), 461 deletions(-)
> create mode 100644 include/hw/net/mdio.h
> create mode 100644 hw/net/mdio.c
>
> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
> new file mode 100644
> index 0000000000..ac36aed3c3
> --- /dev/null
> +++ b/include/hw/net/mdio.h
> @@ -0,0 +1,76 @@
> +#ifndef BITBANG_MDIO_H
> +#define BITBANG_MDIO_H
> +
> +/*
> + * QEMU Bitbang Ethernet MDIO bus & PHY controllers.
> + *
> + * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +/* PHY Advertisement control register */
> +#define PHY_ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
> +#define PHY_ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
> +#define PHY_ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
> +#define PHY_ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
> +
> +struct qemu_phy {
> + uint32_t regs[32];
> +
> + int link;
> +
> + unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
> + void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
> +};
> +
> +struct qemu_mdio {
> + /* bus. */
> + int mdc;
> + int mdio;
> +
> + /* decoder. */
> + enum {
> + PREAMBLE,
> + SOF,
> + OPC,
> + ADDR,
> + REQ,
> + TURNAROUND,
> + DATA
> + } state;
> + unsigned int drive;
> +
> + unsigned int cnt;
> + unsigned int addr;
> + unsigned int opc;
> + unsigned int req;
> + unsigned int data;
> +
> + struct qemu_phy *devs[32];
> +};
> +
> +void tdk_init(struct qemu_phy *phy);
> +void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
> + unsigned int addr);
> +uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
> +void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req, uint16_t data);
> +void mdio_cycle(struct qemu_mdio *bus);
> +
> +#endif
> diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
> index 013c8d0a41..f8d8f8441d 100644
> --- a/hw/net/etraxfs_eth.c
> +++ b/hw/net/etraxfs_eth.c
> @@ -26,287 +26,11 @@
> #include "hw/sysbus.h"
> #include "net/net.h"
> #include "hw/cris/etraxfs.h"
> +#include "hw/net/mdio.h"
> #include "qemu/error-report.h"
>
> #define D(x)
>
> -/* Advertisement control register. */
> -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
> -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
> -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
> -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
> -
> -/*
> - * The MDIO extensions in the TDK PHY model were reversed engineered from the
> - * linux driver (PHYID and Diagnostics reg).
> - * TODO: Add friendly names for the register nums.
> - */
> -struct qemu_phy
> -{
> - uint32_t regs[32];
> -
> - int link;
> -
> - unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
> - void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
> -};
> -
> -static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
> -{
> - int regnum;
> - unsigned r = 0;
> -
> - regnum = req & 0x1f;
> -
> - switch (regnum) {
> - case 1:
> - if (!phy->link) {
> - break;
> - }
> - /* MR1. */
> - /* Speeds and modes. */
> - r |= (1 << 13) | (1 << 14);
> - r |= (1 << 11) | (1 << 12);
> - r |= (1 << 5); /* Autoneg complete. */
> - r |= (1 << 3); /* Autoneg able. */
> - r |= (1 << 2); /* link. */
> - break;
> - case 5:
> - /* Link partner ability.
> - We are kind; always agree with whatever best mode
> - the guest advertises. */
> - r = 1 << 14; /* Success. */
> - /* Copy advertised modes. */
> - r |= phy->regs[4] & (15 << 5);
> - /* Autoneg support. */
> - r |= 1;
> - break;
> - case 18:
> - {
> - /* Diagnostics reg. */
> - int duplex = 0;
> - int speed_100 = 0;
> -
> - if (!phy->link) {
> - break;
> - }
> -
> - /* Are we advertising 100 half or 100 duplex ? */
> - speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
> - speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
> -
> - /* Are we advertising 10 duplex or 100 duplex ? */
> - duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
> - duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
> - r = (speed_100 << 10) | (duplex << 11);
> - }
> - break;
> -
> - default:
> - r = phy->regs[regnum];
> - break;
> - }
> - D(printf("\n%s %x = reg[%d]\n", __func__, r, regnum));
> - return r;
> -}
> -
> -static void
> -tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> -{
> - int regnum;
> -
> - regnum = req & 0x1f;
> - D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
> - switch (regnum) {
> - default:
> - phy->regs[regnum] = data;
> - break;
> - }
> -}
> -
> -static void
> -tdk_init(struct qemu_phy *phy)
> -{
> - phy->regs[0] = 0x3100;
> - /* PHY Id. */
> - phy->regs[2] = 0x0300;
> - phy->regs[3] = 0xe400;
> - /* Autonegotiation advertisement reg. */
> - phy->regs[4] = 0x01E1;
> - phy->link = 1;
> -
> - phy->read = tdk_read;
> - phy->write = tdk_write;
> -}
> -
> -struct qemu_mdio
> -{
> - /* bus. */
> - int mdc;
> - int mdio;
> -
> - /* decoder. */
> - enum {
> - PREAMBLE,
> - SOF,
> - OPC,
> - ADDR,
> - REQ,
> - TURNAROUND,
> - DATA
> - } state;
> - unsigned int drive;
> -
> - unsigned int cnt;
> - unsigned int addr;
> - unsigned int opc;
> - unsigned int req;
> - unsigned int data;
> -
> - struct qemu_phy *devs[32];
> -};
> -
> -static void
> -mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
> -{
> - bus->devs[addr & 0x1f] = phy;
> -}
> -
> -#ifdef USE_THIS_DEAD_CODE
> -static void
> -mdio_detach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
> -{
> - bus->devs[addr & 0x1f] = NULL;
> -}
> -#endif
> -
> -static void mdio_read_req(struct qemu_mdio *bus)
> -{
> - struct qemu_phy *phy;
> -
> - phy = bus->devs[bus->addr];
> - if (phy && phy->read) {
> - bus->data = phy->read(phy, bus->req);
> - } else {
> - bus->data = 0xffff;
> - }
> -}
> -
> -static void mdio_write_req(struct qemu_mdio *bus)
> -{
> - struct qemu_phy *phy;
> -
> - phy = bus->devs[bus->addr];
> - if (phy && phy->write) {
> - phy->write(phy, bus->req, bus->data);
> - }
> -}
> -
> -static void mdio_cycle(struct qemu_mdio *bus)
> -{
> - bus->cnt++;
> -
> - D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
> - bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
> -#if 0
> - if (bus->mdc) {
> - printf("%d", bus->mdio);
> - }
> -#endif
> - switch (bus->state) {
> - case PREAMBLE:
> - if (bus->mdc) {
> - if (bus->cnt >= (32 * 2) && !bus->mdio) {
> - bus->cnt = 0;
> - bus->state = SOF;
> - bus->data = 0;
> - }
> - }
> - break;
> - case SOF:
> - if (bus->mdc) {
> - if (bus->mdio != 1) {
> - printf("WARNING: no SOF\n");
> - }
> - if (bus->cnt == 1*2) {
> - bus->cnt = 0;
> - bus->opc = 0;
> - bus->state = OPC;
> - }
> - }
> - break;
> - case OPC:
> - if (bus->mdc) {
> - bus->opc <<= 1;
> - bus->opc |= bus->mdio & 1;
> - if (bus->cnt == 2*2) {
> - bus->cnt = 0;
> - bus->addr = 0;
> - bus->state = ADDR;
> - }
> - }
> - break;
> - case ADDR:
> - if (bus->mdc) {
> - bus->addr <<= 1;
> - bus->addr |= bus->mdio & 1;
> -
> - if (bus->cnt == 5*2) {
> - bus->cnt = 0;
> - bus->req = 0;
> - bus->state = REQ;
> - }
> - }
> - break;
> - case REQ:
> - if (bus->mdc) {
> - bus->req <<= 1;
> - bus->req |= bus->mdio & 1;
> - if (bus->cnt == 5*2) {
> - bus->cnt = 0;
> - bus->state = TURNAROUND;
> - }
> - }
> - break;
> - case TURNAROUND:
> - if (bus->mdc && bus->cnt == 2*2) {
> - bus->mdio = 0;
> - bus->cnt = 0;
> -
> - if (bus->opc == 2) {
> - bus->drive = 1;
> - mdio_read_req(bus);
> - bus->mdio = bus->data & 1;
> - }
> - bus->state = DATA;
> - }
> - break;
> - case DATA:
> - if (!bus->mdc) {
> - if (bus->drive) {
> - bus->mdio = !!(bus->data & (1 << 15));
> - bus->data <<= 1;
> - }
> - } else {
> - if (!bus->drive) {
> - bus->data <<= 1;
> - bus->data |= bus->mdio;
> - }
> - if (bus->cnt == 16 * 2) {
> - bus->cnt = 0;
> - bus->state = PREAMBLE;
> - if (!bus->drive) {
> - mdio_write_req(bus);
> - }
> - bus->drive = 0;
> - }
> - }
> - break;
> - default:
> - break;
> - }
> -}
> -
> /* ETRAX-FS Ethernet MAC block starts here. */
>
> #define RW_MA0_LO 0x00
> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
> new file mode 100644
> index 0000000000..3763fcc8af
> --- /dev/null
> +++ b/hw/net/mdio.c
> @@ -0,0 +1,262 @@
> +/*
> + * QEMU Ethernet MDIO bus & PHY models
> + *
> + * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + *
> + * This is a generic MDIO implementation.
> + *
> + * TODO:
> + * - Split PHYs out as separate device models so they can be defined and
> + * instantiated separately from the MDIO bus.
> + * - Split out bitbang state machine into a separate model. Mostly this consists
> + * of the mdio_cycle() routine and the bitbang state data in struct qemu_mdio
> + * - Use the GPIO interface for driving bitbang
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu-common.h"
> +#include "qemu/log.h"
> +#include "hw/net/mdio.h"
> +
> +#define D(x)
This should be updated to the new way to handle QEMU logging.
Otherwise this patch looks fine to me.
Alistair
> +
> +/*
> + * The MDIO extensions in the TDK PHY model were reversed engineered from the
> + * linux driver (PHYID and Diagnostics reg).
> + * TODO: Add friendly names for the register nums.
> + */
> +static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
> +{
> + int regnum;
> + unsigned r = 0;
> +
> + regnum = req & 0x1f;
> +
> + switch (regnum) {
> + case 1:
> + if (!phy->link) {
> + break;
> + }
> + /* MR1. */
> + /* Speeds and modes. */
> + r |= (1 << 13) | (1 << 14);
> + r |= (1 << 11) | (1 << 12);
> + r |= (1 << 5); /* Autoneg complete. */
> + r |= (1 << 3); /* Autoneg able. */
> + r |= (1 << 2); /* link. */
> + r |= (1 << 1); /* link. */
> + break;
> + case 5:
> + /* Link partner ability.
> + We are kind; always agree with whatever best mode
> + the guest advertises. */
> + r = 1 << 14; /* Success. */
> + /* Copy advertised modes. */
> + r |= phy->regs[4] & (15 << 5);
> + /* Autoneg support. */
> + r |= 1;
> + break;
> + case 17:
> + /* Marvel PHY on many xilinx boards. */
> + r = 0x8000; /* 1000Mb */
> + break;
> + case 18:
> + {
> + /* Diagnostics reg. */
> + int duplex = 0;
> + int speed_100 = 0;
> +
> + if (!phy->link) {
> + break;
> + }
> +
> + /* Are we advertising 100 half or 100 duplex ? */
> + speed_100 = !!(phy->regs[4] & PHY_ADVERTISE_100HALF);
> + speed_100 |= !!(phy->regs[4] & PHY_ADVERTISE_100FULL);
> +
> + /* Are we advertising 10 duplex or 100 duplex ? */
> + duplex = !!(phy->regs[4] & PHY_ADVERTISE_100FULL);
> + duplex |= !!(phy->regs[4] & PHY_ADVERTISE_10FULL);
> + r = (speed_100 << 10) | (duplex << 11);
> + }
> + break;
> +
> + default:
> + r = phy->regs[regnum];
> + break;
> + }
> + D(printf("\n%s %x = reg[%d]\n", __func__, r, regnum));
> + return r;
> +}
> +
> +static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> +{
> + int regnum;
> +
> + regnum = req & 0x1f;
> + D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
> + switch (regnum) {
> + default:
> + phy->regs[regnum] = data;
> + break;
> + }
> +}
> +
> +void tdk_init(struct qemu_phy *phy)
> +{
> + phy->regs[0] = 0x3100;
> + /* PHY Id. */
> + phy->regs[2] = 0x0300;
> + phy->regs[3] = 0xe400;
> + /* Autonegotiation advertisement reg. */
> + phy->regs[4] = 0x01e1;
> + phy->link = 1;
> +
> + phy->read = tdk_read;
> + phy->write = tdk_write;
> +}
> +
> +void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
> +{
> + bus->devs[addr & 0x1f] = phy;
> +}
> +
> +uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req)
> +{
> + struct qemu_phy *phy;
> +
> + phy = bus->devs[bus->addr];
> + if (phy && phy->read) {
> + return phy->read(phy, req);
> + }
> + return 0xffff;
> +}
> +
> +void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req,
> + uint16_t data)
> +{
> + struct qemu_phy *phy;
> +
> + phy = bus->devs[bus->addr];
> + if (phy && phy->write) {
> + phy->write(phy, req, data);
> + }
> +}
> +
> +void mdio_cycle(struct qemu_mdio *bus)
> +{
> + bus->cnt++;
> +
> + D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
> + bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
> + switch (bus->state) {
> + case PREAMBLE:
> + if (bus->mdc) {
> + if (bus->cnt >= (32 * 2) && !bus->mdio) {
> + bus->cnt = 0;
> + bus->state = SOF;
> + bus->data = 0;
> + }
> + }
> + break;
> + case SOF:
> + if (bus->mdc) {
> + if (bus->mdio != 1) {
> + printf("WARNING: no SOF\n");
> + }
> + if (bus->cnt == 1 * 2) {
> + bus->cnt = 0;
> + bus->opc = 0;
> + bus->state = OPC;
> + }
> + }
> + break;
> + case OPC:
> + if (bus->mdc) {
> + bus->opc <<= 1;
> + bus->opc |= bus->mdio & 1;
> + if (bus->cnt == 2 * 2) {
> + bus->cnt = 0;
> + bus->addr = 0;
> + bus->state = ADDR;
> + }
> + }
> + break;
> + case ADDR:
> + if (bus->mdc) {
> + bus->addr <<= 1;
> + bus->addr |= bus->mdio & 1;
> +
> + if (bus->cnt == 5 * 2) {
> + bus->cnt = 0;
> + bus->req = 0;
> + bus->state = REQ;
> + }
> + }
> + break;
> + case REQ:
> + if (bus->mdc) {
> + bus->req <<= 1;
> + bus->req |= bus->mdio & 1;
> + if (bus->cnt == 5 * 2) {
> + bus->cnt = 0;
> + bus->state = TURNAROUND;
> + }
> + }
> + break;
> + case TURNAROUND:
> + if (bus->mdc && bus->cnt == 2 * 2) {
> + bus->mdio = 0;
> + bus->cnt = 0;
> +
> + if (bus->opc == 2) {
> + bus->drive = 1;
> + bus->data = mdio_read_req(bus, bus->addr, bus->req);
> + bus->mdio = bus->data & 1;
> + }
> + bus->state = DATA;
> + }
> + break;
> + case DATA:
> + if (!bus->mdc) {
> + if (bus->drive) {
> + bus->mdio = !!(bus->data & (1 << 15));
> + bus->data <<= 1;
> + }
> + } else {
> + if (!bus->drive) {
> + bus->data <<= 1;
> + bus->data |= bus->mdio;
> + }
> + if (bus->cnt == 16 * 2) {
> + bus->cnt = 0;
> + bus->state = PREAMBLE;
> + if (!bus->drive) {
> + mdio_write_req(bus, bus->addr, bus->req, bus->data);
> + }
> + bus->drive = 0;
> + }
> + }
> + break;
> + default:
> + break;
> + }
> +}
> diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
> index d4c2c89dc1..1e859fdaae 100644
> --- a/hw/net/xilinx_axienet.c
> +++ b/hw/net/xilinx_axienet.c
> @@ -26,13 +26,12 @@
> #include "hw/sysbus.h"
> #include "qapi/error.h"
> #include "qemu/log.h"
> +#include "hw/net/mdio.h"
> #include "net/net.h"
> #include "net/checksum.h"
>
> #include "hw/stream.h"
>
> -#define DPHY(x)
> -
> #define TYPE_XILINX_AXI_ENET "xlnx.axi-ethernet"
> #define TYPE_XILINX_AXI_ENET_DATA_STREAM "xilinx-axienet-data-stream"
> #define TYPE_XILINX_AXI_ENET_CONTROL_STREAM "xilinx-axienet-control-stream"
> @@ -48,189 +47,9 @@
> OBJECT_CHECK(XilinxAXIEnetStreamSlave, (obj),\
> TYPE_XILINX_AXI_ENET_CONTROL_STREAM)
>
> -/* Advertisement control register. */
> -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
> -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
> -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
> -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
> -
> #define CONTROL_PAYLOAD_WORDS 5
> #define CONTROL_PAYLOAD_SIZE (CONTROL_PAYLOAD_WORDS * (sizeof(uint32_t)))
>
> -struct PHY {
> - uint32_t regs[32];
> -
> - int link;
> -
> - unsigned int (*read)(struct PHY *phy, unsigned int req);
> - void (*write)(struct PHY *phy, unsigned int req,
> - unsigned int data);
> -};
> -
> -static unsigned int tdk_read(struct PHY *phy, unsigned int req)
> -{
> - int regnum;
> - unsigned r = 0;
> -
> - regnum = req & 0x1f;
> -
> - switch (regnum) {
> - case 1:
> - if (!phy->link) {
> - break;
> - }
> - /* MR1. */
> - /* Speeds and modes. */
> - r |= (1 << 13) | (1 << 14);
> - r |= (1 << 11) | (1 << 12);
> - r |= (1 << 5); /* Autoneg complete. */
> - r |= (1 << 3); /* Autoneg able. */
> - r |= (1 << 2); /* link. */
> - r |= (1 << 1); /* link. */
> - break;
> - case 5:
> - /* Link partner ability.
> - We are kind; always agree with whatever best mode
> - the guest advertises. */
> - r = 1 << 14; /* Success. */
> - /* Copy advertised modes. */
> - r |= phy->regs[4] & (15 << 5);
> - /* Autoneg support. */
> - r |= 1;
> - break;
> - case 17:
> - /* Marvell PHY on many xilinx boards. */
> - r = 0x8000; /* 1000Mb */
> - break;
> - case 18:
> - {
> - /* Diagnostics reg. */
> - int duplex = 0;
> - int speed_100 = 0;
> -
> - if (!phy->link) {
> - break;
> - }
> -
> - /* Are we advertising 100 half or 100 duplex ? */
> - speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
> - speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
> -
> - /* Are we advertising 10 duplex or 100 duplex ? */
> - duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
> - duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
> - r = (speed_100 << 10) | (duplex << 11);
> - }
> - break;
> -
> - default:
> - r = phy->regs[regnum];
> - break;
> - }
> - DPHY(qemu_log("\n%s %x = reg[%d]\n", __func__, r, regnum));
> - return r;
> -}
> -
> -static void
> -tdk_write(struct PHY *phy, unsigned int req, unsigned int data)
> -{
> - int regnum;
> -
> - regnum = req & 0x1f;
> - DPHY(qemu_log("%s reg[%d] = %x\n", __func__, regnum, data));
> - switch (regnum) {
> - default:
> - phy->regs[regnum] = data;
> - break;
> - }
> -
> - /* Unconditionally clear regs[BMCR][BMCR_RESET] */
> - phy->regs[0] &= ~0x8000;
> -}
> -
> -static void
> -tdk_init(struct PHY *phy)
> -{
> - phy->regs[0] = 0x3100;
> - /* PHY Id. */
> - phy->regs[2] = 0x0300;
> - phy->regs[3] = 0xe400;
> - /* Autonegotiation advertisement reg. */
> - phy->regs[4] = 0x01E1;
> - phy->link = 1;
> -
> - phy->read = tdk_read;
> - phy->write = tdk_write;
> -}
> -
> -struct MDIOBus {
> - /* bus. */
> - int mdc;
> - int mdio;
> -
> - /* decoder. */
> - enum {
> - PREAMBLE,
> - SOF,
> - OPC,
> - ADDR,
> - REQ,
> - TURNAROUND,
> - DATA
> - } state;
> - unsigned int drive;
> -
> - unsigned int cnt;
> - unsigned int addr;
> - unsigned int opc;
> - unsigned int req;
> - unsigned int data;
> -
> - struct PHY *devs[32];
> -};
> -
> -static void
> -mdio_attach(struct MDIOBus *bus, struct PHY *phy, unsigned int addr)
> -{
> - bus->devs[addr & 0x1f] = phy;
> -}
> -
> -#ifdef USE_THIS_DEAD_CODE
> -static void
> -mdio_detach(struct MDIOBus *bus, struct PHY *phy, unsigned int addr)
> -{
> - bus->devs[addr & 0x1f] = NULL;
> -}
> -#endif
> -
> -static uint16_t mdio_read_req(struct MDIOBus *bus, unsigned int addr,
> - unsigned int reg)
> -{
> - struct PHY *phy;
> - uint16_t data;
> -
> - phy = bus->devs[addr];
> - if (phy && phy->read) {
> - data = phy->read(phy, reg);
> - } else {
> - data = 0xffff;
> - }
> - DPHY(qemu_log("%s addr=%d reg=%d data=%x\n", __func__, addr, reg, data));
> - return data;
> -}
> -
> -static void mdio_write_req(struct MDIOBus *bus, unsigned int addr,
> - unsigned int reg, uint16_t data)
> -{
> - struct PHY *phy;
> -
> - DPHY(qemu_log("%s addr=%d reg=%d data=%x\n", __func__, addr, reg, data));
> - phy = bus->devs[addr];
> - if (phy && phy->write) {
> - phy->write(phy, reg, data);
> - }
> -}
> -
> #define DENET(x)
>
> #define R_RAF (0x000 / 4)
> @@ -322,8 +141,8 @@ enum {
>
> /* Indirect registers. */
> struct TEMAC {
> - struct MDIOBus mdio_bus;
> - struct PHY phy;
> + struct qemu_mdio mdio_bus;
> + struct qemu_phy phy;
>
> void *parent;
> };
> diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
> index 4171af0b5d..a020963d10 100644
> --- a/hw/net/Makefile.objs
> +++ b/hw/net/Makefile.objs
> @@ -30,6 +30,8 @@ common-obj-$(CONFIG_SUNHME) += sunhme.o
> common-obj-$(CONFIG_FTGMAC100) += ftgmac100.o
> common-obj-$(CONFIG_SUNGEM) += sungem.o
>
> +common-obj-y += mdio.o
> +
> obj-$(CONFIG_ETRAXFS) += etraxfs_eth.o
> obj-$(CONFIG_COLDFIRE) += mcf_fec.o
> obj-$(CONFIG_MILKYMIST) += milkymist-minimac2.o
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [Qemu-devel] [PATCH v5 1/7] hw/mdio: Generalize etraxfs MDIO bitbanging emulation
@ 2018-02-27 22:30 ` Alistair Francis
0 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2018-02-27 22:30 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Grant Likely, Jason Wang, Edgar E. Iglesias,
Alistair Francis, Fam Zheng, Andreas Färber, qemu-arm,
qemu-devel@nongnu.org Developers
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> From: Grant Likely <grant.likely@arm.com>
>
> The etraxfs and Xilinx axienet Ethernet models implement quite a nice
> MDIO core that supports both bitbanging and direct register access. This
> change factors the common code out into a separate file. There are no
> functional changes here, just movement of code.
>
> The etraxfs and axienet are slightly different. The etraxfs version
> includes the bitbang state processing, but the axienet version has a
> minor enhancement for read/write of phy registers without using bitbang
> state variables. This patch generalizes the etraxfs version, with the
> axienet change backported in.
>
> Signed-off-by: Grant Likely <grant.likely@arm.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> [PMD: rebased with a minor checkpatch fix]
> ---
> include/hw/net/mdio.h | 76 +++++++++++++
> hw/net/etraxfs_eth.c | 278 +-----------------------------------------------
> hw/net/mdio.c | 262 +++++++++++++++++++++++++++++++++++++++++++++
> hw/net/xilinx_axienet.c | 187 +-------------------------------
> hw/net/Makefile.objs | 2 +
> 5 files changed, 344 insertions(+), 461 deletions(-)
> create mode 100644 include/hw/net/mdio.h
> create mode 100644 hw/net/mdio.c
>
> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
> new file mode 100644
> index 0000000000..ac36aed3c3
> --- /dev/null
> +++ b/include/hw/net/mdio.h
> @@ -0,0 +1,76 @@
> +#ifndef BITBANG_MDIO_H
> +#define BITBANG_MDIO_H
> +
> +/*
> + * QEMU Bitbang Ethernet MDIO bus & PHY controllers.
> + *
> + * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +/* PHY Advertisement control register */
> +#define PHY_ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
> +#define PHY_ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
> +#define PHY_ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
> +#define PHY_ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
> +
> +struct qemu_phy {
> + uint32_t regs[32];
> +
> + int link;
> +
> + unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
> + void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
> +};
> +
> +struct qemu_mdio {
> + /* bus. */
> + int mdc;
> + int mdio;
> +
> + /* decoder. */
> + enum {
> + PREAMBLE,
> + SOF,
> + OPC,
> + ADDR,
> + REQ,
> + TURNAROUND,
> + DATA
> + } state;
> + unsigned int drive;
> +
> + unsigned int cnt;
> + unsigned int addr;
> + unsigned int opc;
> + unsigned int req;
> + unsigned int data;
> +
> + struct qemu_phy *devs[32];
> +};
> +
> +void tdk_init(struct qemu_phy *phy);
> +void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
> + unsigned int addr);
> +uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
> +void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req, uint16_t data);
> +void mdio_cycle(struct qemu_mdio *bus);
> +
> +#endif
> diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
> index 013c8d0a41..f8d8f8441d 100644
> --- a/hw/net/etraxfs_eth.c
> +++ b/hw/net/etraxfs_eth.c
> @@ -26,287 +26,11 @@
> #include "hw/sysbus.h"
> #include "net/net.h"
> #include "hw/cris/etraxfs.h"
> +#include "hw/net/mdio.h"
> #include "qemu/error-report.h"
>
> #define D(x)
>
> -/* Advertisement control register. */
> -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
> -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
> -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
> -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
> -
> -/*
> - * The MDIO extensions in the TDK PHY model were reversed engineered from the
> - * linux driver (PHYID and Diagnostics reg).
> - * TODO: Add friendly names for the register nums.
> - */
> -struct qemu_phy
> -{
> - uint32_t regs[32];
> -
> - int link;
> -
> - unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
> - void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
> -};
> -
> -static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
> -{
> - int regnum;
> - unsigned r = 0;
> -
> - regnum = req & 0x1f;
> -
> - switch (regnum) {
> - case 1:
> - if (!phy->link) {
> - break;
> - }
> - /* MR1. */
> - /* Speeds and modes. */
> - r |= (1 << 13) | (1 << 14);
> - r |= (1 << 11) | (1 << 12);
> - r |= (1 << 5); /* Autoneg complete. */
> - r |= (1 << 3); /* Autoneg able. */
> - r |= (1 << 2); /* link. */
> - break;
> - case 5:
> - /* Link partner ability.
> - We are kind; always agree with whatever best mode
> - the guest advertises. */
> - r = 1 << 14; /* Success. */
> - /* Copy advertised modes. */
> - r |= phy->regs[4] & (15 << 5);
> - /* Autoneg support. */
> - r |= 1;
> - break;
> - case 18:
> - {
> - /* Diagnostics reg. */
> - int duplex = 0;
> - int speed_100 = 0;
> -
> - if (!phy->link) {
> - break;
> - }
> -
> - /* Are we advertising 100 half or 100 duplex ? */
> - speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
> - speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
> -
> - /* Are we advertising 10 duplex or 100 duplex ? */
> - duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
> - duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
> - r = (speed_100 << 10) | (duplex << 11);
> - }
> - break;
> -
> - default:
> - r = phy->regs[regnum];
> - break;
> - }
> - D(printf("\n%s %x = reg[%d]\n", __func__, r, regnum));
> - return r;
> -}
> -
> -static void
> -tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> -{
> - int regnum;
> -
> - regnum = req & 0x1f;
> - D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
> - switch (regnum) {
> - default:
> - phy->regs[regnum] = data;
> - break;
> - }
> -}
> -
> -static void
> -tdk_init(struct qemu_phy *phy)
> -{
> - phy->regs[0] = 0x3100;
> - /* PHY Id. */
> - phy->regs[2] = 0x0300;
> - phy->regs[3] = 0xe400;
> - /* Autonegotiation advertisement reg. */
> - phy->regs[4] = 0x01E1;
> - phy->link = 1;
> -
> - phy->read = tdk_read;
> - phy->write = tdk_write;
> -}
> -
> -struct qemu_mdio
> -{
> - /* bus. */
> - int mdc;
> - int mdio;
> -
> - /* decoder. */
> - enum {
> - PREAMBLE,
> - SOF,
> - OPC,
> - ADDR,
> - REQ,
> - TURNAROUND,
> - DATA
> - } state;
> - unsigned int drive;
> -
> - unsigned int cnt;
> - unsigned int addr;
> - unsigned int opc;
> - unsigned int req;
> - unsigned int data;
> -
> - struct qemu_phy *devs[32];
> -};
> -
> -static void
> -mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
> -{
> - bus->devs[addr & 0x1f] = phy;
> -}
> -
> -#ifdef USE_THIS_DEAD_CODE
> -static void
> -mdio_detach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
> -{
> - bus->devs[addr & 0x1f] = NULL;
> -}
> -#endif
> -
> -static void mdio_read_req(struct qemu_mdio *bus)
> -{
> - struct qemu_phy *phy;
> -
> - phy = bus->devs[bus->addr];
> - if (phy && phy->read) {
> - bus->data = phy->read(phy, bus->req);
> - } else {
> - bus->data = 0xffff;
> - }
> -}
> -
> -static void mdio_write_req(struct qemu_mdio *bus)
> -{
> - struct qemu_phy *phy;
> -
> - phy = bus->devs[bus->addr];
> - if (phy && phy->write) {
> - phy->write(phy, bus->req, bus->data);
> - }
> -}
> -
> -static void mdio_cycle(struct qemu_mdio *bus)
> -{
> - bus->cnt++;
> -
> - D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
> - bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
> -#if 0
> - if (bus->mdc) {
> - printf("%d", bus->mdio);
> - }
> -#endif
> - switch (bus->state) {
> - case PREAMBLE:
> - if (bus->mdc) {
> - if (bus->cnt >= (32 * 2) && !bus->mdio) {
> - bus->cnt = 0;
> - bus->state = SOF;
> - bus->data = 0;
> - }
> - }
> - break;
> - case SOF:
> - if (bus->mdc) {
> - if (bus->mdio != 1) {
> - printf("WARNING: no SOF\n");
> - }
> - if (bus->cnt == 1*2) {
> - bus->cnt = 0;
> - bus->opc = 0;
> - bus->state = OPC;
> - }
> - }
> - break;
> - case OPC:
> - if (bus->mdc) {
> - bus->opc <<= 1;
> - bus->opc |= bus->mdio & 1;
> - if (bus->cnt == 2*2) {
> - bus->cnt = 0;
> - bus->addr = 0;
> - bus->state = ADDR;
> - }
> - }
> - break;
> - case ADDR:
> - if (bus->mdc) {
> - bus->addr <<= 1;
> - bus->addr |= bus->mdio & 1;
> -
> - if (bus->cnt == 5*2) {
> - bus->cnt = 0;
> - bus->req = 0;
> - bus->state = REQ;
> - }
> - }
> - break;
> - case REQ:
> - if (bus->mdc) {
> - bus->req <<= 1;
> - bus->req |= bus->mdio & 1;
> - if (bus->cnt == 5*2) {
> - bus->cnt = 0;
> - bus->state = TURNAROUND;
> - }
> - }
> - break;
> - case TURNAROUND:
> - if (bus->mdc && bus->cnt == 2*2) {
> - bus->mdio = 0;
> - bus->cnt = 0;
> -
> - if (bus->opc == 2) {
> - bus->drive = 1;
> - mdio_read_req(bus);
> - bus->mdio = bus->data & 1;
> - }
> - bus->state = DATA;
> - }
> - break;
> - case DATA:
> - if (!bus->mdc) {
> - if (bus->drive) {
> - bus->mdio = !!(bus->data & (1 << 15));
> - bus->data <<= 1;
> - }
> - } else {
> - if (!bus->drive) {
> - bus->data <<= 1;
> - bus->data |= bus->mdio;
> - }
> - if (bus->cnt == 16 * 2) {
> - bus->cnt = 0;
> - bus->state = PREAMBLE;
> - if (!bus->drive) {
> - mdio_write_req(bus);
> - }
> - bus->drive = 0;
> - }
> - }
> - break;
> - default:
> - break;
> - }
> -}
> -
> /* ETRAX-FS Ethernet MAC block starts here. */
>
> #define RW_MA0_LO 0x00
> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
> new file mode 100644
> index 0000000000..3763fcc8af
> --- /dev/null
> +++ b/hw/net/mdio.c
> @@ -0,0 +1,262 @@
> +/*
> + * QEMU Ethernet MDIO bus & PHY models
> + *
> + * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + *
> + * This is a generic MDIO implementation.
> + *
> + * TODO:
> + * - Split PHYs out as separate device models so they can be defined and
> + * instantiated separately from the MDIO bus.
> + * - Split out bitbang state machine into a separate model. Mostly this consists
> + * of the mdio_cycle() routine and the bitbang state data in struct qemu_mdio
> + * - Use the GPIO interface for driving bitbang
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu-common.h"
> +#include "qemu/log.h"
> +#include "hw/net/mdio.h"
> +
> +#define D(x)
This should be updated to the new way to handle QEMU logging.
Otherwise this patch looks fine to me.
Alistair
> +
> +/*
> + * The MDIO extensions in the TDK PHY model were reversed engineered from the
> + * linux driver (PHYID and Diagnostics reg).
> + * TODO: Add friendly names for the register nums.
> + */
> +static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
> +{
> + int regnum;
> + unsigned r = 0;
> +
> + regnum = req & 0x1f;
> +
> + switch (regnum) {
> + case 1:
> + if (!phy->link) {
> + break;
> + }
> + /* MR1. */
> + /* Speeds and modes. */
> + r |= (1 << 13) | (1 << 14);
> + r |= (1 << 11) | (1 << 12);
> + r |= (1 << 5); /* Autoneg complete. */
> + r |= (1 << 3); /* Autoneg able. */
> + r |= (1 << 2); /* link. */
> + r |= (1 << 1); /* link. */
> + break;
> + case 5:
> + /* Link partner ability.
> + We are kind; always agree with whatever best mode
> + the guest advertises. */
> + r = 1 << 14; /* Success. */
> + /* Copy advertised modes. */
> + r |= phy->regs[4] & (15 << 5);
> + /* Autoneg support. */
> + r |= 1;
> + break;
> + case 17:
> + /* Marvel PHY on many xilinx boards. */
> + r = 0x8000; /* 1000Mb */
> + break;
> + case 18:
> + {
> + /* Diagnostics reg. */
> + int duplex = 0;
> + int speed_100 = 0;
> +
> + if (!phy->link) {
> + break;
> + }
> +
> + /* Are we advertising 100 half or 100 duplex ? */
> + speed_100 = !!(phy->regs[4] & PHY_ADVERTISE_100HALF);
> + speed_100 |= !!(phy->regs[4] & PHY_ADVERTISE_100FULL);
> +
> + /* Are we advertising 10 duplex or 100 duplex ? */
> + duplex = !!(phy->regs[4] & PHY_ADVERTISE_100FULL);
> + duplex |= !!(phy->regs[4] & PHY_ADVERTISE_10FULL);
> + r = (speed_100 << 10) | (duplex << 11);
> + }
> + break;
> +
> + default:
> + r = phy->regs[regnum];
> + break;
> + }
> + D(printf("\n%s %x = reg[%d]\n", __func__, r, regnum));
> + return r;
> +}
> +
> +static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> +{
> + int regnum;
> +
> + regnum = req & 0x1f;
> + D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
> + switch (regnum) {
> + default:
> + phy->regs[regnum] = data;
> + break;
> + }
> +}
> +
> +void tdk_init(struct qemu_phy *phy)
> +{
> + phy->regs[0] = 0x3100;
> + /* PHY Id. */
> + phy->regs[2] = 0x0300;
> + phy->regs[3] = 0xe400;
> + /* Autonegotiation advertisement reg. */
> + phy->regs[4] = 0x01e1;
> + phy->link = 1;
> +
> + phy->read = tdk_read;
> + phy->write = tdk_write;
> +}
> +
> +void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
> +{
> + bus->devs[addr & 0x1f] = phy;
> +}
> +
> +uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req)
> +{
> + struct qemu_phy *phy;
> +
> + phy = bus->devs[bus->addr];
> + if (phy && phy->read) {
> + return phy->read(phy, req);
> + }
> + return 0xffff;
> +}
> +
> +void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req,
> + uint16_t data)
> +{
> + struct qemu_phy *phy;
> +
> + phy = bus->devs[bus->addr];
> + if (phy && phy->write) {
> + phy->write(phy, req, data);
> + }
> +}
> +
> +void mdio_cycle(struct qemu_mdio *bus)
> +{
> + bus->cnt++;
> +
> + D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
> + bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
> + switch (bus->state) {
> + case PREAMBLE:
> + if (bus->mdc) {
> + if (bus->cnt >= (32 * 2) && !bus->mdio) {
> + bus->cnt = 0;
> + bus->state = SOF;
> + bus->data = 0;
> + }
> + }
> + break;
> + case SOF:
> + if (bus->mdc) {
> + if (bus->mdio != 1) {
> + printf("WARNING: no SOF\n");
> + }
> + if (bus->cnt == 1 * 2) {
> + bus->cnt = 0;
> + bus->opc = 0;
> + bus->state = OPC;
> + }
> + }
> + break;
> + case OPC:
> + if (bus->mdc) {
> + bus->opc <<= 1;
> + bus->opc |= bus->mdio & 1;
> + if (bus->cnt == 2 * 2) {
> + bus->cnt = 0;
> + bus->addr = 0;
> + bus->state = ADDR;
> + }
> + }
> + break;
> + case ADDR:
> + if (bus->mdc) {
> + bus->addr <<= 1;
> + bus->addr |= bus->mdio & 1;
> +
> + if (bus->cnt == 5 * 2) {
> + bus->cnt = 0;
> + bus->req = 0;
> + bus->state = REQ;
> + }
> + }
> + break;
> + case REQ:
> + if (bus->mdc) {
> + bus->req <<= 1;
> + bus->req |= bus->mdio & 1;
> + if (bus->cnt == 5 * 2) {
> + bus->cnt = 0;
> + bus->state = TURNAROUND;
> + }
> + }
> + break;
> + case TURNAROUND:
> + if (bus->mdc && bus->cnt == 2 * 2) {
> + bus->mdio = 0;
> + bus->cnt = 0;
> +
> + if (bus->opc == 2) {
> + bus->drive = 1;
> + bus->data = mdio_read_req(bus, bus->addr, bus->req);
> + bus->mdio = bus->data & 1;
> + }
> + bus->state = DATA;
> + }
> + break;
> + case DATA:
> + if (!bus->mdc) {
> + if (bus->drive) {
> + bus->mdio = !!(bus->data & (1 << 15));
> + bus->data <<= 1;
> + }
> + } else {
> + if (!bus->drive) {
> + bus->data <<= 1;
> + bus->data |= bus->mdio;
> + }
> + if (bus->cnt == 16 * 2) {
> + bus->cnt = 0;
> + bus->state = PREAMBLE;
> + if (!bus->drive) {
> + mdio_write_req(bus, bus->addr, bus->req, bus->data);
> + }
> + bus->drive = 0;
> + }
> + }
> + break;
> + default:
> + break;
> + }
> +}
> diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
> index d4c2c89dc1..1e859fdaae 100644
> --- a/hw/net/xilinx_axienet.c
> +++ b/hw/net/xilinx_axienet.c
> @@ -26,13 +26,12 @@
> #include "hw/sysbus.h"
> #include "qapi/error.h"
> #include "qemu/log.h"
> +#include "hw/net/mdio.h"
> #include "net/net.h"
> #include "net/checksum.h"
>
> #include "hw/stream.h"
>
> -#define DPHY(x)
> -
> #define TYPE_XILINX_AXI_ENET "xlnx.axi-ethernet"
> #define TYPE_XILINX_AXI_ENET_DATA_STREAM "xilinx-axienet-data-stream"
> #define TYPE_XILINX_AXI_ENET_CONTROL_STREAM "xilinx-axienet-control-stream"
> @@ -48,189 +47,9 @@
> OBJECT_CHECK(XilinxAXIEnetStreamSlave, (obj),\
> TYPE_XILINX_AXI_ENET_CONTROL_STREAM)
>
> -/* Advertisement control register. */
> -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
> -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
> -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
> -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
> -
> #define CONTROL_PAYLOAD_WORDS 5
> #define CONTROL_PAYLOAD_SIZE (CONTROL_PAYLOAD_WORDS * (sizeof(uint32_t)))
>
> -struct PHY {
> - uint32_t regs[32];
> -
> - int link;
> -
> - unsigned int (*read)(struct PHY *phy, unsigned int req);
> - void (*write)(struct PHY *phy, unsigned int req,
> - unsigned int data);
> -};
> -
> -static unsigned int tdk_read(struct PHY *phy, unsigned int req)
> -{
> - int regnum;
> - unsigned r = 0;
> -
> - regnum = req & 0x1f;
> -
> - switch (regnum) {
> - case 1:
> - if (!phy->link) {
> - break;
> - }
> - /* MR1. */
> - /* Speeds and modes. */
> - r |= (1 << 13) | (1 << 14);
> - r |= (1 << 11) | (1 << 12);
> - r |= (1 << 5); /* Autoneg complete. */
> - r |= (1 << 3); /* Autoneg able. */
> - r |= (1 << 2); /* link. */
> - r |= (1 << 1); /* link. */
> - break;
> - case 5:
> - /* Link partner ability.
> - We are kind; always agree with whatever best mode
> - the guest advertises. */
> - r = 1 << 14; /* Success. */
> - /* Copy advertised modes. */
> - r |= phy->regs[4] & (15 << 5);
> - /* Autoneg support. */
> - r |= 1;
> - break;
> - case 17:
> - /* Marvell PHY on many xilinx boards. */
> - r = 0x8000; /* 1000Mb */
> - break;
> - case 18:
> - {
> - /* Diagnostics reg. */
> - int duplex = 0;
> - int speed_100 = 0;
> -
> - if (!phy->link) {
> - break;
> - }
> -
> - /* Are we advertising 100 half or 100 duplex ? */
> - speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
> - speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
> -
> - /* Are we advertising 10 duplex or 100 duplex ? */
> - duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
> - duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
> - r = (speed_100 << 10) | (duplex << 11);
> - }
> - break;
> -
> - default:
> - r = phy->regs[regnum];
> - break;
> - }
> - DPHY(qemu_log("\n%s %x = reg[%d]\n", __func__, r, regnum));
> - return r;
> -}
> -
> -static void
> -tdk_write(struct PHY *phy, unsigned int req, unsigned int data)
> -{
> - int regnum;
> -
> - regnum = req & 0x1f;
> - DPHY(qemu_log("%s reg[%d] = %x\n", __func__, regnum, data));
> - switch (regnum) {
> - default:
> - phy->regs[regnum] = data;
> - break;
> - }
> -
> - /* Unconditionally clear regs[BMCR][BMCR_RESET] */
> - phy->regs[0] &= ~0x8000;
> -}
> -
> -static void
> -tdk_init(struct PHY *phy)
> -{
> - phy->regs[0] = 0x3100;
> - /* PHY Id. */
> - phy->regs[2] = 0x0300;
> - phy->regs[3] = 0xe400;
> - /* Autonegotiation advertisement reg. */
> - phy->regs[4] = 0x01E1;
> - phy->link = 1;
> -
> - phy->read = tdk_read;
> - phy->write = tdk_write;
> -}
> -
> -struct MDIOBus {
> - /* bus. */
> - int mdc;
> - int mdio;
> -
> - /* decoder. */
> - enum {
> - PREAMBLE,
> - SOF,
> - OPC,
> - ADDR,
> - REQ,
> - TURNAROUND,
> - DATA
> - } state;
> - unsigned int drive;
> -
> - unsigned int cnt;
> - unsigned int addr;
> - unsigned int opc;
> - unsigned int req;
> - unsigned int data;
> -
> - struct PHY *devs[32];
> -};
> -
> -static void
> -mdio_attach(struct MDIOBus *bus, struct PHY *phy, unsigned int addr)
> -{
> - bus->devs[addr & 0x1f] = phy;
> -}
> -
> -#ifdef USE_THIS_DEAD_CODE
> -static void
> -mdio_detach(struct MDIOBus *bus, struct PHY *phy, unsigned int addr)
> -{
> - bus->devs[addr & 0x1f] = NULL;
> -}
> -#endif
> -
> -static uint16_t mdio_read_req(struct MDIOBus *bus, unsigned int addr,
> - unsigned int reg)
> -{
> - struct PHY *phy;
> - uint16_t data;
> -
> - phy = bus->devs[addr];
> - if (phy && phy->read) {
> - data = phy->read(phy, reg);
> - } else {
> - data = 0xffff;
> - }
> - DPHY(qemu_log("%s addr=%d reg=%d data=%x\n", __func__, addr, reg, data));
> - return data;
> -}
> -
> -static void mdio_write_req(struct MDIOBus *bus, unsigned int addr,
> - unsigned int reg, uint16_t data)
> -{
> - struct PHY *phy;
> -
> - DPHY(qemu_log("%s addr=%d reg=%d data=%x\n", __func__, addr, reg, data));
> - phy = bus->devs[addr];
> - if (phy && phy->write) {
> - phy->write(phy, reg, data);
> - }
> -}
> -
> #define DENET(x)
>
> #define R_RAF (0x000 / 4)
> @@ -322,8 +141,8 @@ enum {
>
> /* Indirect registers. */
> struct TEMAC {
> - struct MDIOBus mdio_bus;
> - struct PHY phy;
> + struct qemu_mdio mdio_bus;
> + struct qemu_phy phy;
>
> void *parent;
> };
> diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
> index 4171af0b5d..a020963d10 100644
> --- a/hw/net/Makefile.objs
> +++ b/hw/net/Makefile.objs
> @@ -30,6 +30,8 @@ common-obj-$(CONFIG_SUNHME) += sunhme.o
> common-obj-$(CONFIG_FTGMAC100) += ftgmac100.o
> common-obj-$(CONFIG_SUNGEM) += sungem.o
>
> +common-obj-y += mdio.o
> +
> obj-$(CONFIG_ETRAXFS) += etraxfs_eth.o
> obj-$(CONFIG_COLDFIRE) += mcf_fec.o
> obj-$(CONFIG_MILKYMIST) += milkymist-minimac2.o
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v5 2/7] hw/mdio: Add PHY register definition
2017-09-22 17:13 ` [Qemu-devel] " Philippe Mathieu-Daudé
(?)
(?)
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
2018-02-27 22:31 ` Alistair Francis
-1 siblings, 1 reply; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Grant Likely, Jason Wang
Cc: qemu-devel, Philippe Mathieu-Daudé
From: Grant Likely <grant.likely@arm.com>
Trivial patch to add #defines for defined PHY register address and bit fields
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/net/mdio.h | 24 ++++++++++++++++++++++--
hw/net/mdio.c | 8 ++++----
2 files changed, 26 insertions(+), 6 deletions(-)
diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
index ac36aed3c3..7ffa4389b9 100644
--- a/include/hw/net/mdio.h
+++ b/include/hw/net/mdio.h
@@ -25,14 +25,34 @@
* THE SOFTWARE.
*/
-/* PHY Advertisement control register */
+/* PHY MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CTRL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Regiser */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define NUM_PHY_REGS 0x20 /* 5 bit address bus (0-0x1F) */
+
+#define PHY_CTRL_RST 0x8000 /* PHY reset command */
+#define PHY_CTRL_ANEG_RST 0x0200 /* Autonegotiation reset command */
+
+/* PHY Advertisement control and remote capability registers (same bitfields) */
#define PHY_ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
#define PHY_ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
#define PHY_ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
#define PHY_ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
struct qemu_phy {
- uint32_t regs[32];
+ uint32_t regs[NUM_PHY_REGS];
int link;
diff --git a/hw/net/mdio.c b/hw/net/mdio.c
index 3763fcc8af..3d70d99077 100644
--- a/hw/net/mdio.c
+++ b/hw/net/mdio.c
@@ -122,12 +122,12 @@ static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
void tdk_init(struct qemu_phy *phy)
{
- phy->regs[0] = 0x3100;
+ phy->regs[PHY_CTRL] = 0x3100;
/* PHY Id. */
- phy->regs[2] = 0x0300;
- phy->regs[3] = 0xe400;
+ phy->regs[PHY_ID1] = 0x0300;
+ phy->regs[PHY_ID2] = 0xe400;
/* Autonegotiation advertisement reg. */
- phy->regs[4] = 0x01e1;
+ phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
phy->link = 1;
phy->read = tdk_read;
--
2.14.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [Qemu-devel] [PATCH v5 2/7] hw/mdio: Add PHY register definition
2017-09-22 17:13 ` [Qemu-devel] [PATCH v5 2/7] hw/mdio: Add PHY register definition Philippe Mathieu-Daudé
@ 2018-02-27 22:31 ` Alistair Francis
0 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2018-02-27 22:31 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Grant Likely, Jason Wang,
qemu-devel@nongnu.org Developers
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> From: Grant Likely <grant.likely@arm.com>
>
> Trivial patch to add #defines for defined PHY register address and bit fields
>
> Signed-off-by: Grant Likely <grant.likely@arm.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Alistair
> ---
> include/hw/net/mdio.h | 24 ++++++++++++++++++++++--
> hw/net/mdio.c | 8 ++++----
> 2 files changed, 26 insertions(+), 6 deletions(-)
>
> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
> index ac36aed3c3..7ffa4389b9 100644
> --- a/include/hw/net/mdio.h
> +++ b/include/hw/net/mdio.h
> @@ -25,14 +25,34 @@
> * THE SOFTWARE.
> */
>
> -/* PHY Advertisement control register */
> +/* PHY MII Register/Bit Definitions */
> +/* PHY Registers defined by IEEE */
> +#define PHY_CTRL 0x00 /* Control Register */
> +#define PHY_STATUS 0x01 /* Status Regiser */
> +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
> +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
> +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
> +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
> +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
> +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
> +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
> +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
> +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
> +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
> +
> +#define NUM_PHY_REGS 0x20 /* 5 bit address bus (0-0x1F) */
> +
> +#define PHY_CTRL_RST 0x8000 /* PHY reset command */
> +#define PHY_CTRL_ANEG_RST 0x0200 /* Autonegotiation reset command */
> +
> +/* PHY Advertisement control and remote capability registers (same bitfields) */
> #define PHY_ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
> #define PHY_ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
> #define PHY_ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
> #define PHY_ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
>
> struct qemu_phy {
> - uint32_t regs[32];
> + uint32_t regs[NUM_PHY_REGS];
>
> int link;
>
> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
> index 3763fcc8af..3d70d99077 100644
> --- a/hw/net/mdio.c
> +++ b/hw/net/mdio.c
> @@ -122,12 +122,12 @@ static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
>
> void tdk_init(struct qemu_phy *phy)
> {
> - phy->regs[0] = 0x3100;
> + phy->regs[PHY_CTRL] = 0x3100;
> /* PHY Id. */
> - phy->regs[2] = 0x0300;
> - phy->regs[3] = 0xe400;
> + phy->regs[PHY_ID1] = 0x0300;
> + phy->regs[PHY_ID2] = 0xe400;
> /* Autonegotiation advertisement reg. */
> - phy->regs[4] = 0x01e1;
> + phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
> phy->link = 1;
>
> phy->read = tdk_read;
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v5 3/7] hw/mdio: Generalize phy initialization routine
2017-09-22 17:13 ` [Qemu-devel] " Philippe Mathieu-Daudé
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
-1 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Grant Likely, Jason Wang, Edgar E. Iglesias,
Alistair Francis, Fam Zheng, Andreas Färber
Cc: qemu-arm, qemu-devel, Philippe Mathieu-Daudé
From: Grant Likely <grant.likely@arm.com>
There really isn't anything tdk-specific about tdk_init() other than the
phy id registers. The function should instead be generalized for any
phy, at least as far as the ID registers are concerned. For the most
part the read/write behaviour should be very similar across PHYs.
This patch renames tdk_{read,write,init}() to mdio_phy_*() so it can be
used for any PHY.
More work definitely needs to be done here to make it easy to override
the default behaviour for specific PHYs, but this at least is a
reasonable start.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: just rebased]
---
include/hw/net/mdio.h | 2 +-
hw/net/etraxfs_eth.c | 2 +-
hw/net/mdio.c | 14 +++++++-------
hw/net/xilinx_axienet.c | 2 +-
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
index 7ffa4389b9..b3b4f497c0 100644
--- a/include/hw/net/mdio.h
+++ b/include/hw/net/mdio.h
@@ -86,7 +86,7 @@ struct qemu_mdio {
struct qemu_phy *devs[32];
};
-void tdk_init(struct qemu_phy *phy);
+void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
unsigned int addr);
uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
index f8d8f8441d..4c5415771f 100644
--- a/hw/net/etraxfs_eth.c
+++ b/hw/net/etraxfs_eth.c
@@ -333,7 +333,7 @@ static int fs_eth_init(SysBusDevice *sbd)
qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
- tdk_init(&s->phy);
+ mdio_phy_init(&s->phy, 0x0300, 0xe400);
mdio_attach(&s->mdio_bus, &s->phy, s->phyaddr);
return 0;
}
diff --git a/hw/net/mdio.c b/hw/net/mdio.c
index 3d70d99077..33bfbb4623 100644
--- a/hw/net/mdio.c
+++ b/hw/net/mdio.c
@@ -43,7 +43,7 @@
* linux driver (PHYID and Diagnostics reg).
* TODO: Add friendly names for the register nums.
*/
-static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
+static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
{
int regnum;
unsigned r = 0;
@@ -107,7 +107,7 @@ static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
return r;
}
-static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
+static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
{
int regnum;
@@ -120,18 +120,18 @@ static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
}
}
-void tdk_init(struct qemu_phy *phy)
+void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
{
phy->regs[PHY_CTRL] = 0x3100;
/* PHY Id. */
- phy->regs[PHY_ID1] = 0x0300;
- phy->regs[PHY_ID2] = 0xe400;
+ phy->regs[PHY_ID1] = id1;
+ phy->regs[PHY_ID2] = id2;
/* Autonegotiation advertisement reg. */
phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
phy->link = 1;
- phy->read = tdk_read;
- phy->write = tdk_write;
+ phy->read = mdio_phy_read;
+ phy->write = mdio_phy_write;
}
void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
index 1e859fdaae..408cd6e675 100644
--- a/hw/net/xilinx_axienet.c
+++ b/hw/net/xilinx_axienet.c
@@ -791,7 +791,7 @@ static void xilinx_enet_realize(DeviceState *dev, Error **errp)
object_get_typename(OBJECT(dev)), dev->id, s);
qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
- tdk_init(&s->TEMAC.phy);
+ mdio_phy_init(&s->TEMAC.phy, 0x0300, 0xe400);
mdio_attach(&s->TEMAC.mdio_bus, &s->TEMAC.phy, s->c_phyaddr);
s->TEMAC.parent = s;
--
2.14.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [Qemu-devel] [PATCH v5 3/7] hw/mdio: Generalize phy initialization routine
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Grant Likely, Jason Wang, Edgar E. Iglesias,
Alistair Francis, Fam Zheng, Andreas Färber
Cc: qemu-devel, qemu-arm, Philippe Mathieu-Daudé
From: Grant Likely <grant.likely@arm.com>
There really isn't anything tdk-specific about tdk_init() other than the
phy id registers. The function should instead be generalized for any
phy, at least as far as the ID registers are concerned. For the most
part the read/write behaviour should be very similar across PHYs.
This patch renames tdk_{read,write,init}() to mdio_phy_*() so it can be
used for any PHY.
More work definitely needs to be done here to make it easy to override
the default behaviour for specific PHYs, but this at least is a
reasonable start.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: just rebased]
---
include/hw/net/mdio.h | 2 +-
hw/net/etraxfs_eth.c | 2 +-
hw/net/mdio.c | 14 +++++++-------
hw/net/xilinx_axienet.c | 2 +-
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
index 7ffa4389b9..b3b4f497c0 100644
--- a/include/hw/net/mdio.h
+++ b/include/hw/net/mdio.h
@@ -86,7 +86,7 @@ struct qemu_mdio {
struct qemu_phy *devs[32];
};
-void tdk_init(struct qemu_phy *phy);
+void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
unsigned int addr);
uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
index f8d8f8441d..4c5415771f 100644
--- a/hw/net/etraxfs_eth.c
+++ b/hw/net/etraxfs_eth.c
@@ -333,7 +333,7 @@ static int fs_eth_init(SysBusDevice *sbd)
qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
- tdk_init(&s->phy);
+ mdio_phy_init(&s->phy, 0x0300, 0xe400);
mdio_attach(&s->mdio_bus, &s->phy, s->phyaddr);
return 0;
}
diff --git a/hw/net/mdio.c b/hw/net/mdio.c
index 3d70d99077..33bfbb4623 100644
--- a/hw/net/mdio.c
+++ b/hw/net/mdio.c
@@ -43,7 +43,7 @@
* linux driver (PHYID and Diagnostics reg).
* TODO: Add friendly names for the register nums.
*/
-static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
+static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
{
int regnum;
unsigned r = 0;
@@ -107,7 +107,7 @@ static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
return r;
}
-static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
+static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
{
int regnum;
@@ -120,18 +120,18 @@ static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
}
}
-void tdk_init(struct qemu_phy *phy)
+void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
{
phy->regs[PHY_CTRL] = 0x3100;
/* PHY Id. */
- phy->regs[PHY_ID1] = 0x0300;
- phy->regs[PHY_ID2] = 0xe400;
+ phy->regs[PHY_ID1] = id1;
+ phy->regs[PHY_ID2] = id2;
/* Autonegotiation advertisement reg. */
phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
phy->link = 1;
- phy->read = tdk_read;
- phy->write = tdk_write;
+ phy->read = mdio_phy_read;
+ phy->write = mdio_phy_write;
}
void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
index 1e859fdaae..408cd6e675 100644
--- a/hw/net/xilinx_axienet.c
+++ b/hw/net/xilinx_axienet.c
@@ -791,7 +791,7 @@ static void xilinx_enet_realize(DeviceState *dev, Error **errp)
object_get_typename(OBJECT(dev)), dev->id, s);
qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
- tdk_init(&s->TEMAC.phy);
+ mdio_phy_init(&s->TEMAC.phy, 0x0300, 0xe400);
mdio_attach(&s->TEMAC.mdio_bus, &s->TEMAC.phy, s->c_phyaddr);
s->TEMAC.parent = s;
--
2.14.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [Qemu-arm] [Qemu-devel] [PATCH v5 3/7] hw/mdio: Generalize phy initialization routine
2017-09-22 17:13 ` Philippe Mathieu-Daudé
@ 2018-02-27 22:33 ` Alistair Francis
-1 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2018-02-27 22:33 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Fam Zheng, Jason Wang,
qemu-devel@nongnu.org Developers, Alistair Francis, Grant Likely,
qemu-arm, Andreas Färber
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> From: Grant Likely <grant.likely@arm.com>
>
> There really isn't anything tdk-specific about tdk_init() other than the
> phy id registers. The function should instead be generalized for any
> phy, at least as far as the ID registers are concerned. For the most
> part the read/write behaviour should be very similar across PHYs.
>
> This patch renames tdk_{read,write,init}() to mdio_phy_*() so it can be
> used for any PHY.
>
> More work definitely needs to be done here to make it easy to override
> the default behaviour for specific PHYs, but this at least is a
> reasonable start.
>
> Signed-off-by: Grant Likely <grant.likely@arm.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> [PMD: just rebased]
> ---
> include/hw/net/mdio.h | 2 +-
> hw/net/etraxfs_eth.c | 2 +-
> hw/net/mdio.c | 14 +++++++-------
> hw/net/xilinx_axienet.c | 2 +-
> 4 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
> index 7ffa4389b9..b3b4f497c0 100644
> --- a/include/hw/net/mdio.h
> +++ b/include/hw/net/mdio.h
> @@ -86,7 +86,7 @@ struct qemu_mdio {
> struct qemu_phy *devs[32];
> };
>
> -void tdk_init(struct qemu_phy *phy);
> +void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
> unsigned int addr);
> uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
> diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
> index f8d8f8441d..4c5415771f 100644
> --- a/hw/net/etraxfs_eth.c
> +++ b/hw/net/etraxfs_eth.c
> @@ -333,7 +333,7 @@ static int fs_eth_init(SysBusDevice *sbd)
> qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
>
>
> - tdk_init(&s->phy);
> + mdio_phy_init(&s->phy, 0x0300, 0xe400);
> mdio_attach(&s->mdio_bus, &s->phy, s->phyaddr);
> return 0;
> }
> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
> index 3d70d99077..33bfbb4623 100644
> --- a/hw/net/mdio.c
> +++ b/hw/net/mdio.c
> @@ -43,7 +43,7 @@
> * linux driver (PHYID and Diagnostics reg).
> * TODO: Add friendly names for the register nums.
> */
> -static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
> +static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
> {
> int regnum;
> unsigned r = 0;
> @@ -107,7 +107,7 @@ static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
> return r;
> }
>
> -static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> +static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> {
> int regnum;
>
> @@ -120,18 +120,18 @@ static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> }
> }
>
> -void tdk_init(struct qemu_phy *phy)
> +void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
> {
> phy->regs[PHY_CTRL] = 0x3100;
> /* PHY Id. */
> - phy->regs[PHY_ID1] = 0x0300;
> - phy->regs[PHY_ID2] = 0xe400;
> + phy->regs[PHY_ID1] = id1;
> + phy->regs[PHY_ID2] = id2;
These should be set by QEMU properties instead of values to the init() function.
Alistair
> /* Autonegotiation advertisement reg. */
> phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
> phy->link = 1;
>
> - phy->read = tdk_read;
> - phy->write = tdk_write;
> + phy->read = mdio_phy_read;
> + phy->write = mdio_phy_write;
> }
>
> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
> diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
> index 1e859fdaae..408cd6e675 100644
> --- a/hw/net/xilinx_axienet.c
> +++ b/hw/net/xilinx_axienet.c
> @@ -791,7 +791,7 @@ static void xilinx_enet_realize(DeviceState *dev, Error **errp)
> object_get_typename(OBJECT(dev)), dev->id, s);
> qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
>
> - tdk_init(&s->TEMAC.phy);
> + mdio_phy_init(&s->TEMAC.phy, 0x0300, 0xe400);
> mdio_attach(&s->TEMAC.mdio_bus, &s->TEMAC.phy, s->c_phyaddr);
>
> s->TEMAC.parent = s;
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [Qemu-devel] [PATCH v5 3/7] hw/mdio: Generalize phy initialization routine
@ 2018-02-27 22:33 ` Alistair Francis
0 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2018-02-27 22:33 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Grant Likely, Jason Wang, Edgar E. Iglesias,
Alistair Francis, Fam Zheng, Andreas Färber, qemu-arm,
qemu-devel@nongnu.org Developers
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> From: Grant Likely <grant.likely@arm.com>
>
> There really isn't anything tdk-specific about tdk_init() other than the
> phy id registers. The function should instead be generalized for any
> phy, at least as far as the ID registers are concerned. For the most
> part the read/write behaviour should be very similar across PHYs.
>
> This patch renames tdk_{read,write,init}() to mdio_phy_*() so it can be
> used for any PHY.
>
> More work definitely needs to be done here to make it easy to override
> the default behaviour for specific PHYs, but this at least is a
> reasonable start.
>
> Signed-off-by: Grant Likely <grant.likely@arm.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> [PMD: just rebased]
> ---
> include/hw/net/mdio.h | 2 +-
> hw/net/etraxfs_eth.c | 2 +-
> hw/net/mdio.c | 14 +++++++-------
> hw/net/xilinx_axienet.c | 2 +-
> 4 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
> index 7ffa4389b9..b3b4f497c0 100644
> --- a/include/hw/net/mdio.h
> +++ b/include/hw/net/mdio.h
> @@ -86,7 +86,7 @@ struct qemu_mdio {
> struct qemu_phy *devs[32];
> };
>
> -void tdk_init(struct qemu_phy *phy);
> +void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
> unsigned int addr);
> uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
> diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
> index f8d8f8441d..4c5415771f 100644
> --- a/hw/net/etraxfs_eth.c
> +++ b/hw/net/etraxfs_eth.c
> @@ -333,7 +333,7 @@ static int fs_eth_init(SysBusDevice *sbd)
> qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
>
>
> - tdk_init(&s->phy);
> + mdio_phy_init(&s->phy, 0x0300, 0xe400);
> mdio_attach(&s->mdio_bus, &s->phy, s->phyaddr);
> return 0;
> }
> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
> index 3d70d99077..33bfbb4623 100644
> --- a/hw/net/mdio.c
> +++ b/hw/net/mdio.c
> @@ -43,7 +43,7 @@
> * linux driver (PHYID and Diagnostics reg).
> * TODO: Add friendly names for the register nums.
> */
> -static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
> +static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
> {
> int regnum;
> unsigned r = 0;
> @@ -107,7 +107,7 @@ static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
> return r;
> }
>
> -static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> +static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> {
> int regnum;
>
> @@ -120,18 +120,18 @@ static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> }
> }
>
> -void tdk_init(struct qemu_phy *phy)
> +void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
> {
> phy->regs[PHY_CTRL] = 0x3100;
> /* PHY Id. */
> - phy->regs[PHY_ID1] = 0x0300;
> - phy->regs[PHY_ID2] = 0xe400;
> + phy->regs[PHY_ID1] = id1;
> + phy->regs[PHY_ID2] = id2;
These should be set by QEMU properties instead of values to the init() function.
Alistair
> /* Autonegotiation advertisement reg. */
> phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
> phy->link = 1;
>
> - phy->read = tdk_read;
> - phy->write = tdk_write;
> + phy->read = mdio_phy_read;
> + phy->write = mdio_phy_write;
> }
>
> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
> diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
> index 1e859fdaae..408cd6e675 100644
> --- a/hw/net/xilinx_axienet.c
> +++ b/hw/net/xilinx_axienet.c
> @@ -791,7 +791,7 @@ static void xilinx_enet_realize(DeviceState *dev, Error **errp)
> object_get_typename(OBJECT(dev)), dev->id, s);
> qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
>
> - tdk_init(&s->TEMAC.phy);
> + mdio_phy_init(&s->TEMAC.phy, 0x0300, 0xe400);
> mdio_attach(&s->TEMAC.mdio_bus, &s->TEMAC.phy, s->c_phyaddr);
>
> s->TEMAC.parent = s;
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [Qemu-arm] [Qemu-devel] [PATCH v5 3/7] hw/mdio: Generalize phy initialization routine
2018-02-27 22:33 ` Alistair Francis
@ 2018-05-28 3:09 ` Philippe Mathieu-Daudé
-1 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-05-28 3:09 UTC (permalink / raw)
To: Alistair Francis
Cc: Peter Maydell, Fam Zheng, Jason Wang,
qemu-devel@nongnu.org Developers, Grant Likely, qemu-arm,
Andreas Färber
Hi Alistair,
On 02/27/2018 07:33 PM, Alistair Francis wrote:
> On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
> <f4bug@amsat.org> wrote:
>> From: Grant Likely <grant.likely@arm.com>
>>
>> There really isn't anything tdk-specific about tdk_init() other than the
>> phy id registers. The function should instead be generalized for any
>> phy, at least as far as the ID registers are concerned. For the most
>> part the read/write behaviour should be very similar across PHYs.
>>
>> This patch renames tdk_{read,write,init}() to mdio_phy_*() so it can be
>> used for any PHY.
>>
>> More work definitely needs to be done here to make it easy to override
>> the default behaviour for specific PHYs, but this at least is a
>> reasonable start.
>>
>> Signed-off-by: Grant Likely <grant.likely@arm.com>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> [PMD: just rebased]
>> ---
>> include/hw/net/mdio.h | 2 +-
>> hw/net/etraxfs_eth.c | 2 +-
>> hw/net/mdio.c | 14 +++++++-------
>> hw/net/xilinx_axienet.c | 2 +-
>> 4 files changed, 10 insertions(+), 10 deletions(-)
>>
>> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
>> index 7ffa4389b9..b3b4f497c0 100644
>> --- a/include/hw/net/mdio.h
>> +++ b/include/hw/net/mdio.h
>> @@ -86,7 +86,7 @@ struct qemu_mdio {
>> struct qemu_phy *devs[32];
>> };
>>
>> -void tdk_init(struct qemu_phy *phy);
>> +void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
>> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
>> unsigned int addr);
>> uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
>> diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
>> index f8d8f8441d..4c5415771f 100644
>> --- a/hw/net/etraxfs_eth.c
>> +++ b/hw/net/etraxfs_eth.c
>> @@ -333,7 +333,7 @@ static int fs_eth_init(SysBusDevice *sbd)
>> qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
>>
>>
>> - tdk_init(&s->phy);
>> + mdio_phy_init(&s->phy, 0x0300, 0xe400);
>> mdio_attach(&s->mdio_bus, &s->phy, s->phyaddr);
>> return 0;
>> }
>> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
>> index 3d70d99077..33bfbb4623 100644
>> --- a/hw/net/mdio.c
>> +++ b/hw/net/mdio.c
>> @@ -43,7 +43,7 @@
>> * linux driver (PHYID and Diagnostics reg).
>> * TODO: Add friendly names for the register nums.
>> */
>> -static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
>> +static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
>> {
>> int regnum;
>> unsigned r = 0;
>> @@ -107,7 +107,7 @@ static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
>> return r;
>> }
>>
>> -static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
>> +static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
>> {
>> int regnum;
>>
>> @@ -120,18 +120,18 @@ static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
>> }
>> }
>>
>> -void tdk_init(struct qemu_phy *phy)
>> +void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
>> {
>> phy->regs[PHY_CTRL] = 0x3100;
>> /* PHY Id. */
>> - phy->regs[PHY_ID1] = 0x0300;
>> - phy->regs[PHY_ID2] = 0xe400;
>> + phy->regs[PHY_ID1] = id1;
>> + phy->regs[PHY_ID2] = id2;
>
> These should be set by QEMU properties instead of values to the init() function.
I agree, but this is not (yet) a QOM'ified device.
I believe if I start to QOM'ify it this series will finish in 1 more
year. This is however a nice cleanup so far, and the QOM device can come
in a follow up series.
>
> Alistair
>
>> /* Autonegotiation advertisement reg. */
>> phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
>> phy->link = 1;
>>
>> - phy->read = tdk_read;
>> - phy->write = tdk_write;
>> + phy->read = mdio_phy_read;
>> + phy->write = mdio_phy_write;
>> }
>>
>> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
>> diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
>> index 1e859fdaae..408cd6e675 100644
>> --- a/hw/net/xilinx_axienet.c
>> +++ b/hw/net/xilinx_axienet.c
>> @@ -791,7 +791,7 @@ static void xilinx_enet_realize(DeviceState *dev, Error **errp)
>> object_get_typename(OBJECT(dev)), dev->id, s);
>> qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
>>
>> - tdk_init(&s->TEMAC.phy);
>> + mdio_phy_init(&s->TEMAC.phy, 0x0300, 0xe400);
>> mdio_attach(&s->TEMAC.mdio_bus, &s->TEMAC.phy, s->c_phyaddr);
>>
>> s->TEMAC.parent = s;
>> --
>> 2.14.1
>>
>>
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [Qemu-devel] [PATCH v5 3/7] hw/mdio: Generalize phy initialization routine
@ 2018-05-28 3:09 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-05-28 3:09 UTC (permalink / raw)
To: Alistair Francis
Cc: Peter Maydell, Grant Likely, Jason Wang, Edgar E. Iglesias,
Fam Zheng, Andreas Färber, qemu-arm,
qemu-devel@nongnu.org Developers
Hi Alistair,
On 02/27/2018 07:33 PM, Alistair Francis wrote:
> On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
> <f4bug@amsat.org> wrote:
>> From: Grant Likely <grant.likely@arm.com>
>>
>> There really isn't anything tdk-specific about tdk_init() other than the
>> phy id registers. The function should instead be generalized for any
>> phy, at least as far as the ID registers are concerned. For the most
>> part the read/write behaviour should be very similar across PHYs.
>>
>> This patch renames tdk_{read,write,init}() to mdio_phy_*() so it can be
>> used for any PHY.
>>
>> More work definitely needs to be done here to make it easy to override
>> the default behaviour for specific PHYs, but this at least is a
>> reasonable start.
>>
>> Signed-off-by: Grant Likely <grant.likely@arm.com>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> [PMD: just rebased]
>> ---
>> include/hw/net/mdio.h | 2 +-
>> hw/net/etraxfs_eth.c | 2 +-
>> hw/net/mdio.c | 14 +++++++-------
>> hw/net/xilinx_axienet.c | 2 +-
>> 4 files changed, 10 insertions(+), 10 deletions(-)
>>
>> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
>> index 7ffa4389b9..b3b4f497c0 100644
>> --- a/include/hw/net/mdio.h
>> +++ b/include/hw/net/mdio.h
>> @@ -86,7 +86,7 @@ struct qemu_mdio {
>> struct qemu_phy *devs[32];
>> };
>>
>> -void tdk_init(struct qemu_phy *phy);
>> +void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
>> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
>> unsigned int addr);
>> uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
>> diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
>> index f8d8f8441d..4c5415771f 100644
>> --- a/hw/net/etraxfs_eth.c
>> +++ b/hw/net/etraxfs_eth.c
>> @@ -333,7 +333,7 @@ static int fs_eth_init(SysBusDevice *sbd)
>> qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
>>
>>
>> - tdk_init(&s->phy);
>> + mdio_phy_init(&s->phy, 0x0300, 0xe400);
>> mdio_attach(&s->mdio_bus, &s->phy, s->phyaddr);
>> return 0;
>> }
>> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
>> index 3d70d99077..33bfbb4623 100644
>> --- a/hw/net/mdio.c
>> +++ b/hw/net/mdio.c
>> @@ -43,7 +43,7 @@
>> * linux driver (PHYID and Diagnostics reg).
>> * TODO: Add friendly names for the register nums.
>> */
>> -static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
>> +static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
>> {
>> int regnum;
>> unsigned r = 0;
>> @@ -107,7 +107,7 @@ static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
>> return r;
>> }
>>
>> -static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
>> +static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
>> {
>> int regnum;
>>
>> @@ -120,18 +120,18 @@ static void tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
>> }
>> }
>>
>> -void tdk_init(struct qemu_phy *phy)
>> +void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
>> {
>> phy->regs[PHY_CTRL] = 0x3100;
>> /* PHY Id. */
>> - phy->regs[PHY_ID1] = 0x0300;
>> - phy->regs[PHY_ID2] = 0xe400;
>> + phy->regs[PHY_ID1] = id1;
>> + phy->regs[PHY_ID2] = id2;
>
> These should be set by QEMU properties instead of values to the init() function.
I agree, but this is not (yet) a QOM'ified device.
I believe if I start to QOM'ify it this series will finish in 1 more
year. This is however a nice cleanup so far, and the QOM device can come
in a follow up series.
>
> Alistair
>
>> /* Autonegotiation advertisement reg. */
>> phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
>> phy->link = 1;
>>
>> - phy->read = tdk_read;
>> - phy->write = tdk_write;
>> + phy->read = mdio_phy_read;
>> + phy->write = mdio_phy_write;
>> }
>>
>> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
>> diff --git a/hw/net/xilinx_axienet.c b/hw/net/xilinx_axienet.c
>> index 1e859fdaae..408cd6e675 100644
>> --- a/hw/net/xilinx_axienet.c
>> +++ b/hw/net/xilinx_axienet.c
>> @@ -791,7 +791,7 @@ static void xilinx_enet_realize(DeviceState *dev, Error **errp)
>> object_get_typename(OBJECT(dev)), dev->id, s);
>> qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
>>
>> - tdk_init(&s->TEMAC.phy);
>> + mdio_phy_init(&s->TEMAC.phy, 0x0300, 0xe400);
>> mdio_attach(&s->TEMAC.mdio_bus, &s->TEMAC.phy, s->c_phyaddr);
>>
>> s->TEMAC.parent = s;
>> --
>> 2.14.1
>>
>>
^ permalink raw reply [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v5 4/7] hw/mdio: Mask out read-only bits.
2017-09-22 17:13 ` [Qemu-devel] " Philippe Mathieu-Daudé
` (3 preceding siblings ...)
(?)
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
2018-02-27 22:37 ` Alistair Francis
-1 siblings, 1 reply; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Grant Likely, Jason Wang
Cc: qemu-devel, Philippe Mathieu-Daudé
From: Grant Likely <grant.likely@arm.com>
The RST and ANEG_RST bits are commands, not settings. An operating
system will get confused (or at least u-boot does) if those bits remain
set after writing to them. Therefore, mask them out on write.
Similarly, no bits in the ID1, ID2, and remote capability registers are
writeable; so mask them out also.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: just rebased]
---
include/hw/net/mdio.h | 1 +
hw/net/mdio.c | 16 ++++++++++++----
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
index b3b4f497c0..ed1879a728 100644
--- a/include/hw/net/mdio.h
+++ b/include/hw/net/mdio.h
@@ -53,6 +53,7 @@
struct qemu_phy {
uint32_t regs[NUM_PHY_REGS];
+ const uint16_t *regs_readonly_mask; /* 0=writable, 1=read-only */
int link;
diff --git a/hw/net/mdio.c b/hw/net/mdio.c
index 33bfbb4623..89a6a3a590 100644
--- a/hw/net/mdio.c
+++ b/hw/net/mdio.c
@@ -109,17 +109,24 @@ static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
{
- int regnum;
+ int regnum = req & 0x1f;
+ uint16_t mask = phy->regs_readonly_mask[regnum];
- regnum = req & 0x1f;
- D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
+ D(printf("%s reg[%d] = %x; mask=%x\n", __func__, regnum, data, mask));
switch (regnum) {
default:
- phy->regs[regnum] = data;
+ phy->regs[regnum] = (phy->regs[regnum] & mask) | (data & ~mask);
break;
}
}
+static const uint16_t default_readonly_mask[32] = {
+ [PHY_CTRL] = PHY_CTRL_RST | PHY_CTRL_ANEG_RST,
+ [PHY_ID1] = 0xffff,
+ [PHY_ID2] = 0xffff,
+ [PHY_LP_ABILITY] = 0xffff,
+};
+
void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
{
phy->regs[PHY_CTRL] = 0x3100;
@@ -128,6 +135,7 @@ void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
phy->regs[PHY_ID2] = id2;
/* Autonegotiation advertisement reg. */
phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
+ phy->regs_readonly_mask = default_readonly_mask;
phy->link = 1;
phy->read = mdio_phy_read;
--
2.14.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [Qemu-devel] [PATCH v5 4/7] hw/mdio: Mask out read-only bits.
2017-09-22 17:13 ` [Qemu-devel] [PATCH v5 4/7] hw/mdio: Mask out read-only bits Philippe Mathieu-Daudé
@ 2018-02-27 22:37 ` Alistair Francis
0 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2018-02-27 22:37 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Grant Likely, Jason Wang,
qemu-devel@nongnu.org Developers
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> From: Grant Likely <grant.likely@arm.com>
>
> The RST and ANEG_RST bits are commands, not settings. An operating
> system will get confused (or at least u-boot does) if those bits remain
> set after writing to them. Therefore, mask them out on write.
>
> Similarly, no bits in the ID1, ID2, and remote capability registers are
> writeable; so mask them out also.
>
> Signed-off-by: Grant Likely <grant.likely@arm.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> [PMD: just rebased]
> ---
> include/hw/net/mdio.h | 1 +
> hw/net/mdio.c | 16 ++++++++++++----
> 2 files changed, 13 insertions(+), 4 deletions(-)
>
> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
> index b3b4f497c0..ed1879a728 100644
> --- a/include/hw/net/mdio.h
> +++ b/include/hw/net/mdio.h
> @@ -53,6 +53,7 @@
>
> struct qemu_phy {
> uint32_t regs[NUM_PHY_REGS];
> + const uint16_t *regs_readonly_mask; /* 0=writable, 1=read-only */
>
> int link;
>
> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
> index 33bfbb4623..89a6a3a590 100644
> --- a/hw/net/mdio.c
> +++ b/hw/net/mdio.c
> @@ -109,17 +109,24 @@ static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
>
> static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> {
> - int regnum;
> + int regnum = req & 0x1f;
> + uint16_t mask = phy->regs_readonly_mask[regnum];
>
> - regnum = req & 0x1f;
> - D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
> + D(printf("%s reg[%d] = %x; mask=%x\n", __func__, regnum, data, mask));
> switch (regnum) {
> default:
> - phy->regs[regnum] = data;
> + phy->regs[regnum] = (phy->regs[regnum] & mask) | (data & ~mask);
> break;
> }
> }
>
> +static const uint16_t default_readonly_mask[32] = {
> + [PHY_CTRL] = PHY_CTRL_RST | PHY_CTRL_ANEG_RST,
> + [PHY_ID1] = 0xffff,
> + [PHY_ID2] = 0xffff,
> + [PHY_LP_ABILITY] = 0xffff,
> +};
This is what the register API is really good at :)
Overall this looks fine, can we use a macro for the 32 though and then
protect accesses with an assert() or if()?
Alistair
> +
> void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
> {
> phy->regs[PHY_CTRL] = 0x3100;
> @@ -128,6 +135,7 @@ void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
> phy->regs[PHY_ID2] = id2;
> /* Autonegotiation advertisement reg. */
> phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
> + phy->regs_readonly_mask = default_readonly_mask;
> phy->link = 1;
>
> phy->read = mdio_phy_read;
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v5 5/7] hw/mdio: Refactor bitbanging state machine
2017-09-22 17:13 ` [Qemu-devel] " Philippe Mathieu-Daudé
` (4 preceding siblings ...)
(?)
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
2018-02-27 22:40 ` Alistair Francis
-1 siblings, 1 reply; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Edgar E. Iglesias, Grant Likely, Jason Wang
Cc: qemu-devel, Philippe Mathieu-Daudé
From: Grant Likely <grant.likely@arm.com>
The MDIO state machine has a moderate amount of duplicate code in the
state processing that can be consolidated. This patch does so and
reorganizes it a bit so that far less code is required. Most of the
states simply stream a fixed number of bits in as a single integer and
can be handled by a common processing function that checks for
completion of the state and returns the streamed in value.
Changes include:
- Move clock state change tracking into core code
- Use a common shift register for clocking data in and out
- Create separate mdc & mdio accessor functions
- will be replaced with GPIO connection in a follow-on patch
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: just rebased]
---
include/hw/net/mdio.h | 41 ++++++++-------
hw/net/etraxfs_eth.c | 11 ++--
hw/net/mdio.c | 140 ++++++++++++++++++++++----------------------------
3 files changed, 87 insertions(+), 105 deletions(-)
diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
index ed1879a728..7fca19784e 100644
--- a/include/hw/net/mdio.h
+++ b/include/hw/net/mdio.h
@@ -52,37 +52,33 @@
#define PHY_ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
struct qemu_phy {
- uint32_t regs[NUM_PHY_REGS];
+ uint16_t regs[NUM_PHY_REGS];
const uint16_t *regs_readonly_mask; /* 0=writable, 1=read-only */
- int link;
+ bool link;
- unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
- void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
+ uint16_t (*read)(struct qemu_phy *phy, unsigned int req);
+ void (*write)(struct qemu_phy *phy, unsigned int req, uint16_t data);
};
struct qemu_mdio {
- /* bus. */
- int mdc;
- int mdio;
-
- /* decoder. */
+ /* bitbanging state machine */
+ bool mdc;
+ bool mdio;
enum {
PREAMBLE,
- SOF,
OPC,
ADDR,
REQ,
TURNAROUND,
DATA
} state;
- unsigned int drive;
- unsigned int cnt;
- unsigned int addr;
- unsigned int opc;
- unsigned int req;
- unsigned int data;
+ uint16_t cnt; /* Bit count for current state */
+ uint16_t addr; /* PHY Address; retrieved during ADDR state */
+ uint16_t opc; /* Operation; 2:read */
+ uint16_t req; /* Register address */
+ uint32_t shiftreg; /* shift register; bits in to or out from PHY */
struct qemu_phy *devs[32];
};
@@ -91,7 +87,16 @@ void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
unsigned int addr);
uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
-void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req, uint16_t data);
-void mdio_cycle(struct qemu_mdio *bus);
+void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req,
+ uint16_t data);
+void mdio_bitbang_set_clk(struct qemu_mdio *bus, bool mdc);
+static inline void mdio_bitbang_set_data(struct qemu_mdio *bus, bool mdio)
+{
+ bus->mdio = mdio;
+}
+static inline bool mdio_bitbang_get_data(struct qemu_mdio *bus)
+{
+ return bus->mdio;
+}
#endif
diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
index 4c5415771f..1b518ea16e 100644
--- a/hw/net/etraxfs_eth.c
+++ b/hw/net/etraxfs_eth.c
@@ -119,7 +119,7 @@ eth_read(void *opaque, hwaddr addr, unsigned int size)
switch (addr) {
case R_STAT:
- r = eth->mdio_bus.mdio & 1;
+ r = mdio_bitbang_get_data(ð->mdio_bus);
break;
default:
r = eth->regs[addr];
@@ -177,13 +177,10 @@ eth_write(void *opaque, hwaddr addr,
case RW_MGM_CTRL:
/* Attach an MDIO/PHY abstraction. */
if (value & 2) {
- eth->mdio_bus.mdio = value & 1;
+ mdio_bitbang_set_data(ð->mdio_bus, value & 1);
}
- if (eth->mdio_bus.mdc != (value & 4)) {
- mdio_cycle(ð->mdio_bus);
- eth_validate_duplex(eth);
- }
- eth->mdio_bus.mdc = !!(value & 4);
+ mdio_bitbang_set_clk(ð->mdio_bus, value & 4);
+ eth_validate_duplex(eth);
eth->regs[addr] = value;
break;
diff --git a/hw/net/mdio.c b/hw/net/mdio.c
index 89a6a3a590..96e10fada0 100644
--- a/hw/net/mdio.c
+++ b/hw/net/mdio.c
@@ -43,7 +43,7 @@
* linux driver (PHYID and Diagnostics reg).
* TODO: Add friendly names for the register nums.
*/
-static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
+static uint16_t mdio_phy_read(struct qemu_phy *phy, unsigned int req)
{
int regnum;
unsigned r = 0;
@@ -107,7 +107,8 @@ static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
return r;
}
-static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
+static void mdio_phy_write(struct qemu_phy *phy, unsigned int req,
+ uint16_t data)
{
int regnum = req & 0x1f;
uint16_t mask = phy->regs_readonly_mask[regnum];
@@ -136,13 +137,14 @@ void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
/* Autonegotiation advertisement reg. */
phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
phy->regs_readonly_mask = default_readonly_mask;
- phy->link = 1;
+ phy->link = true;
phy->read = mdio_phy_read;
phy->write = mdio_phy_write;
}
-void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
+void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
+ unsigned int addr)
{
bus->devs[addr & 0x1f] = phy;
}
@@ -169,99 +171,77 @@ void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req,
}
}
-void mdio_cycle(struct qemu_mdio *bus)
+/**
+ * mdio_bitbang_update() - internal function to check how many clocks have
+ * passed and move to the next state if necessary. Returns TRUE on state change.
+ */
+static bool mdio_bitbang_update(struct qemu_mdio *bus, int num_bits, int next,
+ uint16_t *reg)
{
+ if (bus->cnt < num_bits) {
+ return false;
+ }
+ if (reg) {
+ *reg = bus->shiftreg;
+ }
+ bus->state = next;
+ bus->cnt = 0;
+ bus->shiftreg = 0;
+ return true;
+}
+
+/**
+ * mdio_bitbang_set_clk() - set value of mdc signal and update state
+ */
+void mdio_bitbang_set_clk(struct qemu_mdio *bus, bool mdc)
+{
+ uint16_t tmp;
+
+ if (mdc == bus->mdc) {
+ return; /* Clock state hasn't changed; do nothing */
+ }
+
+ bus->mdc = mdc;
+ if (bus->mdc) {
+ /* Falling (inactive) clock edge */
+ if ((bus->state == DATA) && (bus->opc == 2)) {
+ bus->mdio = !!(bus->shiftreg & 0x8000);
+ }
+ return;
+ }
+
+ /* Rising clock Edge */
+ bus->shiftreg = (bus->shiftreg << 1) | bus->mdio;
bus->cnt++;
-
D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
- bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
+ bus->mdc, bus->mdio, bus->state, bus->cnt));
switch (bus->state) {
case PREAMBLE:
- if (bus->mdc) {
- if (bus->cnt >= (32 * 2) && !bus->mdio) {
- bus->cnt = 0;
- bus->state = SOF;
- bus->data = 0;
- }
- }
- break;
- case SOF:
- if (bus->mdc) {
- if (bus->mdio != 1) {
- printf("WARNING: no SOF\n");
- }
- if (bus->cnt == 1 * 2) {
- bus->cnt = 0;
- bus->opc = 0;
- bus->state = OPC;
- }
+ /* MDIO must be 30 clocks high, 1 low, and 1 high to get out of
+ preamble */
+ if (bus->shiftreg == 0xfffffffd) {
+ mdio_bitbang_update(bus, 0, OPC, NULL);
}
break;
case OPC:
- if (bus->mdc) {
- bus->opc <<= 1;
- bus->opc |= bus->mdio & 1;
- if (bus->cnt == 2 * 2) {
- bus->cnt = 0;
- bus->addr = 0;
- bus->state = ADDR;
- }
- }
+ mdio_bitbang_update(bus, 2, ADDR, &bus->opc);
break;
case ADDR:
- if (bus->mdc) {
- bus->addr <<= 1;
- bus->addr |= bus->mdio & 1;
-
- if (bus->cnt == 5 * 2) {
- bus->cnt = 0;
- bus->req = 0;
- bus->state = REQ;
- }
- }
+ mdio_bitbang_update(bus, 5, REQ, &bus->addr);
break;
case REQ:
- if (bus->mdc) {
- bus->req <<= 1;
- bus->req |= bus->mdio & 1;
- if (bus->cnt == 5 * 2) {
- bus->cnt = 0;
- bus->state = TURNAROUND;
- }
- }
+ mdio_bitbang_update(bus, 5, TURNAROUND, &bus->req);
break;
case TURNAROUND:
- if (bus->mdc && bus->cnt == 2 * 2) {
- bus->mdio = 0;
- bus->cnt = 0;
-
- if (bus->opc == 2) {
- bus->drive = 1;
- bus->data = mdio_read_req(bus, bus->addr, bus->req);
- bus->mdio = bus->data & 1;
- }
- bus->state = DATA;
+ /* If beginning of DATA READ cycle, then read PHY into shift register */
+ if (mdio_bitbang_update(bus, 2, DATA, NULL) && (bus->opc == 2)) {
+ bus->shiftreg = mdio_read_req(bus, bus->addr, bus->req);
}
break;
case DATA:
- if (!bus->mdc) {
- if (bus->drive) {
- bus->mdio = !!(bus->data & (1 << 15));
- bus->data <<= 1;
- }
- } else {
- if (!bus->drive) {
- bus->data <<= 1;
- bus->data |= bus->mdio;
- }
- if (bus->cnt == 16 * 2) {
- bus->cnt = 0;
- bus->state = PREAMBLE;
- if (!bus->drive) {
- mdio_write_req(bus, bus->addr, bus->req, bus->data);
- }
- bus->drive = 0;
- }
+ /* If end of DATA WRITE cycle, then write shift register to PHY */
+ if (mdio_bitbang_update(bus, 16, PREAMBLE, &tmp) && (bus->opc == 1)) {
+ mdio_write_req(bus, bus->addr, bus->req, tmp);
}
break;
default:
--
2.14.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [Qemu-devel] [PATCH v5 5/7] hw/mdio: Refactor bitbanging state machine
2017-09-22 17:13 ` [Qemu-devel] [PATCH v5 5/7] hw/mdio: Refactor bitbanging state machine Philippe Mathieu-Daudé
@ 2018-02-27 22:40 ` Alistair Francis
0 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2018-02-27 22:40 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Edgar E. Iglesias, Grant Likely, Jason Wang,
qemu-devel@nongnu.org Developers
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> From: Grant Likely <grant.likely@arm.com>
>
> The MDIO state machine has a moderate amount of duplicate code in the
> state processing that can be consolidated. This patch does so and
> reorganizes it a bit so that far less code is required. Most of the
> states simply stream a fixed number of bits in as a single integer and
> can be handled by a common processing function that checks for
> completion of the state and returns the streamed in value.
>
> Changes include:
> - Move clock state change tracking into core code
> - Use a common shift register for clocking data in and out
> - Create separate mdc & mdio accessor functions
> - will be replaced with GPIO connection in a follow-on patch
>
> Signed-off-by: Grant Likely <grant.likely@arm.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> [PMD: just rebased]
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Alistair
> ---
> include/hw/net/mdio.h | 41 ++++++++-------
> hw/net/etraxfs_eth.c | 11 ++--
> hw/net/mdio.c | 140 ++++++++++++++++++++++----------------------------
> 3 files changed, 87 insertions(+), 105 deletions(-)
>
> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
> index ed1879a728..7fca19784e 100644
> --- a/include/hw/net/mdio.h
> +++ b/include/hw/net/mdio.h
> @@ -52,37 +52,33 @@
> #define PHY_ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
>
> struct qemu_phy {
> - uint32_t regs[NUM_PHY_REGS];
> + uint16_t regs[NUM_PHY_REGS];
> const uint16_t *regs_readonly_mask; /* 0=writable, 1=read-only */
>
> - int link;
> + bool link;
>
> - unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
> - void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
> + uint16_t (*read)(struct qemu_phy *phy, unsigned int req);
> + void (*write)(struct qemu_phy *phy, unsigned int req, uint16_t data);
> };
>
> struct qemu_mdio {
> - /* bus. */
> - int mdc;
> - int mdio;
> -
> - /* decoder. */
> + /* bitbanging state machine */
> + bool mdc;
> + bool mdio;
> enum {
> PREAMBLE,
> - SOF,
> OPC,
> ADDR,
> REQ,
> TURNAROUND,
> DATA
> } state;
> - unsigned int drive;
>
> - unsigned int cnt;
> - unsigned int addr;
> - unsigned int opc;
> - unsigned int req;
> - unsigned int data;
> + uint16_t cnt; /* Bit count for current state */
> + uint16_t addr; /* PHY Address; retrieved during ADDR state */
> + uint16_t opc; /* Operation; 2:read */
> + uint16_t req; /* Register address */
> + uint32_t shiftreg; /* shift register; bits in to or out from PHY */
>
> struct qemu_phy *devs[32];
> };
> @@ -91,7 +87,16 @@ void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
> unsigned int addr);
> uint16_t mdio_read_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req);
> -void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req, uint16_t data);
> -void mdio_cycle(struct qemu_mdio *bus);
> +void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req,
> + uint16_t data);
> +void mdio_bitbang_set_clk(struct qemu_mdio *bus, bool mdc);
> +static inline void mdio_bitbang_set_data(struct qemu_mdio *bus, bool mdio)
> +{
> + bus->mdio = mdio;
> +}
> +static inline bool mdio_bitbang_get_data(struct qemu_mdio *bus)
> +{
> + return bus->mdio;
> +}
>
> #endif
> diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c
> index 4c5415771f..1b518ea16e 100644
> --- a/hw/net/etraxfs_eth.c
> +++ b/hw/net/etraxfs_eth.c
> @@ -119,7 +119,7 @@ eth_read(void *opaque, hwaddr addr, unsigned int size)
>
> switch (addr) {
> case R_STAT:
> - r = eth->mdio_bus.mdio & 1;
> + r = mdio_bitbang_get_data(ð->mdio_bus);
> break;
> default:
> r = eth->regs[addr];
> @@ -177,13 +177,10 @@ eth_write(void *opaque, hwaddr addr,
> case RW_MGM_CTRL:
> /* Attach an MDIO/PHY abstraction. */
> if (value & 2) {
> - eth->mdio_bus.mdio = value & 1;
> + mdio_bitbang_set_data(ð->mdio_bus, value & 1);
> }
> - if (eth->mdio_bus.mdc != (value & 4)) {
> - mdio_cycle(ð->mdio_bus);
> - eth_validate_duplex(eth);
> - }
> - eth->mdio_bus.mdc = !!(value & 4);
> + mdio_bitbang_set_clk(ð->mdio_bus, value & 4);
> + eth_validate_duplex(eth);
> eth->regs[addr] = value;
> break;
>
> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
> index 89a6a3a590..96e10fada0 100644
> --- a/hw/net/mdio.c
> +++ b/hw/net/mdio.c
> @@ -43,7 +43,7 @@
> * linux driver (PHYID and Diagnostics reg).
> * TODO: Add friendly names for the register nums.
> */
> -static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
> +static uint16_t mdio_phy_read(struct qemu_phy *phy, unsigned int req)
> {
> int regnum;
> unsigned r = 0;
> @@ -107,7 +107,8 @@ static unsigned int mdio_phy_read(struct qemu_phy *phy, unsigned int req)
> return r;
> }
>
> -static void mdio_phy_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
> +static void mdio_phy_write(struct qemu_phy *phy, unsigned int req,
> + uint16_t data)
> {
> int regnum = req & 0x1f;
> uint16_t mask = phy->regs_readonly_mask[regnum];
> @@ -136,13 +137,14 @@ void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2)
> /* Autonegotiation advertisement reg. */
> phy->regs[PHY_AUTONEG_ADV] = 0x01e1;
> phy->regs_readonly_mask = default_readonly_mask;
> - phy->link = 1;
> + phy->link = true;
>
> phy->read = mdio_phy_read;
> phy->write = mdio_phy_write;
> }
>
> -void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
> +void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
> + unsigned int addr)
> {
> bus->devs[addr & 0x1f] = phy;
> }
> @@ -169,99 +171,77 @@ void mdio_write_req(struct qemu_mdio *bus, uint8_t addr, uint8_t req,
> }
> }
>
> -void mdio_cycle(struct qemu_mdio *bus)
> +/**
> + * mdio_bitbang_update() - internal function to check how many clocks have
> + * passed and move to the next state if necessary. Returns TRUE on state change.
> + */
> +static bool mdio_bitbang_update(struct qemu_mdio *bus, int num_bits, int next,
> + uint16_t *reg)
> {
> + if (bus->cnt < num_bits) {
> + return false;
> + }
> + if (reg) {
> + *reg = bus->shiftreg;
> + }
> + bus->state = next;
> + bus->cnt = 0;
> + bus->shiftreg = 0;
> + return true;
> +}
> +
> +/**
> + * mdio_bitbang_set_clk() - set value of mdc signal and update state
> + */
> +void mdio_bitbang_set_clk(struct qemu_mdio *bus, bool mdc)
> +{
> + uint16_t tmp;
> +
> + if (mdc == bus->mdc) {
> + return; /* Clock state hasn't changed; do nothing */
> + }
> +
> + bus->mdc = mdc;
> + if (bus->mdc) {
> + /* Falling (inactive) clock edge */
> + if ((bus->state == DATA) && (bus->opc == 2)) {
> + bus->mdio = !!(bus->shiftreg & 0x8000);
> + }
> + return;
> + }
> +
> + /* Rising clock Edge */
> + bus->shiftreg = (bus->shiftreg << 1) | bus->mdio;
> bus->cnt++;
> -
> D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
> - bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
> + bus->mdc, bus->mdio, bus->state, bus->cnt));
> switch (bus->state) {
> case PREAMBLE:
> - if (bus->mdc) {
> - if (bus->cnt >= (32 * 2) && !bus->mdio) {
> - bus->cnt = 0;
> - bus->state = SOF;
> - bus->data = 0;
> - }
> - }
> - break;
> - case SOF:
> - if (bus->mdc) {
> - if (bus->mdio != 1) {
> - printf("WARNING: no SOF\n");
> - }
> - if (bus->cnt == 1 * 2) {
> - bus->cnt = 0;
> - bus->opc = 0;
> - bus->state = OPC;
> - }
> + /* MDIO must be 30 clocks high, 1 low, and 1 high to get out of
> + preamble */
> + if (bus->shiftreg == 0xfffffffd) {
> + mdio_bitbang_update(bus, 0, OPC, NULL);
> }
> break;
> case OPC:
> - if (bus->mdc) {
> - bus->opc <<= 1;
> - bus->opc |= bus->mdio & 1;
> - if (bus->cnt == 2 * 2) {
> - bus->cnt = 0;
> - bus->addr = 0;
> - bus->state = ADDR;
> - }
> - }
> + mdio_bitbang_update(bus, 2, ADDR, &bus->opc);
> break;
> case ADDR:
> - if (bus->mdc) {
> - bus->addr <<= 1;
> - bus->addr |= bus->mdio & 1;
> -
> - if (bus->cnt == 5 * 2) {
> - bus->cnt = 0;
> - bus->req = 0;
> - bus->state = REQ;
> - }
> - }
> + mdio_bitbang_update(bus, 5, REQ, &bus->addr);
> break;
> case REQ:
> - if (bus->mdc) {
> - bus->req <<= 1;
> - bus->req |= bus->mdio & 1;
> - if (bus->cnt == 5 * 2) {
> - bus->cnt = 0;
> - bus->state = TURNAROUND;
> - }
> - }
> + mdio_bitbang_update(bus, 5, TURNAROUND, &bus->req);
> break;
> case TURNAROUND:
> - if (bus->mdc && bus->cnt == 2 * 2) {
> - bus->mdio = 0;
> - bus->cnt = 0;
> -
> - if (bus->opc == 2) {
> - bus->drive = 1;
> - bus->data = mdio_read_req(bus, bus->addr, bus->req);
> - bus->mdio = bus->data & 1;
> - }
> - bus->state = DATA;
> + /* If beginning of DATA READ cycle, then read PHY into shift register */
> + if (mdio_bitbang_update(bus, 2, DATA, NULL) && (bus->opc == 2)) {
> + bus->shiftreg = mdio_read_req(bus, bus->addr, bus->req);
> }
> break;
> case DATA:
> - if (!bus->mdc) {
> - if (bus->drive) {
> - bus->mdio = !!(bus->data & (1 << 15));
> - bus->data <<= 1;
> - }
> - } else {
> - if (!bus->drive) {
> - bus->data <<= 1;
> - bus->data |= bus->mdio;
> - }
> - if (bus->cnt == 16 * 2) {
> - bus->cnt = 0;
> - bus->state = PREAMBLE;
> - if (!bus->drive) {
> - mdio_write_req(bus, bus->addr, bus->req, bus->data);
> - }
> - bus->drive = 0;
> - }
> + /* If end of DATA WRITE cycle, then write shift register to PHY */
> + if (mdio_bitbang_update(bus, 16, PREAMBLE, &tmp) && (bus->opc == 1)) {
> + mdio_write_req(bus, bus->addr, bus->req, tmp);
> }
> break;
> default:
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v5 6/7] hw/mdio: Add VMState support
2017-09-22 17:13 ` [Qemu-devel] " Philippe Mathieu-Daudé
` (5 preceding siblings ...)
(?)
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
2018-02-27 22:42 ` Alistair Francis
-1 siblings, 1 reply; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Grant Likely, Jason Wang
Cc: qemu-devel, Philippe Mathieu-Daudé
From: Grant Likely <grant.likely@arm.com>
The MDIO model needs to have VMState support before it can be used by
devices that support VMState. This patch adds VMState macros for both
qemu_mdio and qemu_phy.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: just rebased]
---
include/hw/net/mdio.h | 22 ++++++++++++++++++++++
hw/net/mdio.c | 30 ++++++++++++++++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
index 7fca19784e..b94e5ec337 100644
--- a/include/hw/net/mdio.h
+++ b/include/hw/net/mdio.h
@@ -25,6 +25,8 @@
* THE SOFTWARE.
*/
+#include "migration/vmstate.h"
+
/* PHY MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
#define PHY_CTRL 0x00 /* Control Register */
@@ -61,6 +63,16 @@ struct qemu_phy {
void (*write)(struct qemu_phy *phy, unsigned int req, uint16_t data);
};
+extern const VMStateDescription vmstate_mdio_phy;
+
+#define VMSTATE_MDIO_PHY(_field, _state) { \
+ .name = (stringify(_field)), \
+ .size = sizeof(struct qemu_phy), \
+ .vmsd = &vmstate_mdio_phy, \
+ .flags = VMS_STRUCT, \
+ .offset = vmstate_offset_value(_state, _field, struct qemu_phy), \
+}
+
struct qemu_mdio {
/* bitbanging state machine */
bool mdc;
@@ -83,6 +95,16 @@ struct qemu_mdio {
struct qemu_phy *devs[32];
};
+extern const VMStateDescription vmstate_mdio;
+
+#define VMSTATE_MDIO(_field, _state) { \
+ .name = (stringify(_field)), \
+ .size = sizeof(struct qemu_mdio), \
+ .vmsd = &vmstate_mdio, \
+ .flags = VMS_STRUCT, \
+ .offset = vmstate_offset_value(_state, _field, struct qemu_mdio), \
+}
+
void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
unsigned int addr);
diff --git a/hw/net/mdio.c b/hw/net/mdio.c
index 96e10fada0..6c13cc7272 100644
--- a/hw/net/mdio.c
+++ b/hw/net/mdio.c
@@ -248,3 +248,33 @@ void mdio_bitbang_set_clk(struct qemu_mdio *bus, bool mdc)
break;
}
}
+
+const VMStateDescription vmstate_mdio = {
+ .name = "mdio",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_BOOL(mdc, struct qemu_mdio),
+ VMSTATE_BOOL(mdio, struct qemu_mdio),
+ VMSTATE_UINT32(state, struct qemu_mdio),
+ VMSTATE_UINT16(cnt, struct qemu_mdio),
+ VMSTATE_UINT16(addr, struct qemu_mdio),
+ VMSTATE_UINT16(opc, struct qemu_mdio),
+ VMSTATE_UINT16(req, struct qemu_mdio),
+ VMSTATE_UINT32(shiftreg, struct qemu_mdio),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+const VMStateDescription vmstate_mdio_phy = {
+ .name = "mdio",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT16_ARRAY(regs, struct qemu_phy, 32),
+ VMSTATE_BOOL(link, struct qemu_phy),
+ VMSTATE_END_OF_LIST()
+ }
+};
--
2.14.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [Qemu-devel] [PATCH v5 6/7] hw/mdio: Add VMState support
2017-09-22 17:13 ` [Qemu-devel] [PATCH v5 6/7] hw/mdio: Add VMState support Philippe Mathieu-Daudé
@ 2018-02-27 22:42 ` Alistair Francis
0 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2018-02-27 22:42 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Grant Likely, Jason Wang,
qemu-devel@nongnu.org Developers
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> From: Grant Likely <grant.likely@arm.com>
>
> The MDIO model needs to have VMState support before it can be used by
> devices that support VMState. This patch adds VMState macros for both
> qemu_mdio and qemu_phy.
>
> Signed-off-by: Grant Likely <grant.likely@arm.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> [PMD: just rebased]
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Alistair
> ---
> include/hw/net/mdio.h | 22 ++++++++++++++++++++++
> hw/net/mdio.c | 30 ++++++++++++++++++++++++++++++
> 2 files changed, 52 insertions(+)
>
> diff --git a/include/hw/net/mdio.h b/include/hw/net/mdio.h
> index 7fca19784e..b94e5ec337 100644
> --- a/include/hw/net/mdio.h
> +++ b/include/hw/net/mdio.h
> @@ -25,6 +25,8 @@
> * THE SOFTWARE.
> */
>
> +#include "migration/vmstate.h"
> +
> /* PHY MII Register/Bit Definitions */
> /* PHY Registers defined by IEEE */
> #define PHY_CTRL 0x00 /* Control Register */
> @@ -61,6 +63,16 @@ struct qemu_phy {
> void (*write)(struct qemu_phy *phy, unsigned int req, uint16_t data);
> };
>
> +extern const VMStateDescription vmstate_mdio_phy;
> +
> +#define VMSTATE_MDIO_PHY(_field, _state) { \
> + .name = (stringify(_field)), \
> + .size = sizeof(struct qemu_phy), \
> + .vmsd = &vmstate_mdio_phy, \
> + .flags = VMS_STRUCT, \
> + .offset = vmstate_offset_value(_state, _field, struct qemu_phy), \
> +}
> +
> struct qemu_mdio {
> /* bitbanging state machine */
> bool mdc;
> @@ -83,6 +95,16 @@ struct qemu_mdio {
> struct qemu_phy *devs[32];
> };
>
> +extern const VMStateDescription vmstate_mdio;
> +
> +#define VMSTATE_MDIO(_field, _state) { \
> + .name = (stringify(_field)), \
> + .size = sizeof(struct qemu_mdio), \
> + .vmsd = &vmstate_mdio, \
> + .flags = VMS_STRUCT, \
> + .offset = vmstate_offset_value(_state, _field, struct qemu_mdio), \
> +}
> +
> void mdio_phy_init(struct qemu_phy *phy, uint16_t id1, uint16_t id2);
> void mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy,
> unsigned int addr);
> diff --git a/hw/net/mdio.c b/hw/net/mdio.c
> index 96e10fada0..6c13cc7272 100644
> --- a/hw/net/mdio.c
> +++ b/hw/net/mdio.c
> @@ -248,3 +248,33 @@ void mdio_bitbang_set_clk(struct qemu_mdio *bus, bool mdc)
> break;
> }
> }
> +
> +const VMStateDescription vmstate_mdio = {
> + .name = "mdio",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .minimum_version_id_old = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_BOOL(mdc, struct qemu_mdio),
> + VMSTATE_BOOL(mdio, struct qemu_mdio),
> + VMSTATE_UINT32(state, struct qemu_mdio),
> + VMSTATE_UINT16(cnt, struct qemu_mdio),
> + VMSTATE_UINT16(addr, struct qemu_mdio),
> + VMSTATE_UINT16(opc, struct qemu_mdio),
> + VMSTATE_UINT16(req, struct qemu_mdio),
> + VMSTATE_UINT32(shiftreg, struct qemu_mdio),
> + VMSTATE_END_OF_LIST()
> + }
> +};
> +
> +const VMStateDescription vmstate_mdio_phy = {
> + .name = "mdio",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .minimum_version_id_old = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT16_ARRAY(regs, struct qemu_phy, 32),
> + VMSTATE_BOOL(link, struct qemu_phy),
> + VMSTATE_END_OF_LIST()
> + }
> +};
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v5 7/7] hw/mdio: Use bitbang core for smc91c111 network device
2017-09-22 17:13 ` [Qemu-devel] " Philippe Mathieu-Daudé
` (6 preceding siblings ...)
(?)
@ 2017-09-22 17:13 ` Philippe Mathieu-Daudé
-1 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-09-22 17:13 UTC (permalink / raw)
To: Peter Maydell, Grant Likely, Jason Wang, Peter Crosthwaite
Cc: qemu-devel, Philippe Mathieu-Daudé
From: Grant Likely <grant.likely@arm.com>
The smc91c111 device has bitbanged MDIO access, but the model doesn't
yet implement it. This patch uses the generalized bitbang MDIO support
pulled out of etraxfs Ethernet driver.
The MDIO state machine is driven by changes in state to the clock
control bit in the management register. The PHY model emulated is
currently trivial (being whatever was done for the etraxfs driver), but
it is enough to get an OS to recognize a PHY as being present.
Tested with the versatilepb model with U-Boot and the Linux Kernel as
client software.
Updated .version_id and .minimum_version_id fields because this patch
add fields to the state structure.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: just rebased]
---
hw/net/smc91c111.c | 27 ++++++++++++++++++++++-----
1 file changed, 22 insertions(+), 5 deletions(-)
diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c
index 3b16dcf5a1..b5cc493f9f 100644
--- a/hw/net/smc91c111.c
+++ b/hw/net/smc91c111.c
@@ -11,6 +11,7 @@
#include "hw/sysbus.h"
#include "net/net.h"
#include "hw/devices.h"
+#include "hw/net/mdio.h"
/* For crc32 */
#include <zlib.h>
@@ -49,12 +50,16 @@ typedef struct {
uint8_t int_level;
uint8_t int_mask;
MemoryRegion mmio;
+
+ /* MDIO bus and the attached phy */
+ struct qemu_mdio mdio_bus;
+ struct qemu_phy phy;
} smc91c111_state;
static const VMStateDescription vmstate_smc91c111 = {
.name = "smc91c111",
- .version_id = 1,
- .minimum_version_id = 1,
+ .version_id = 2,
+ .minimum_version_id = 2,
.fields = (VMStateField[]) {
VMSTATE_UINT16(tcr, smc91c111_state),
VMSTATE_UINT16(rcr, smc91c111_state),
@@ -76,6 +81,8 @@ static const VMStateDescription vmstate_smc91c111 = {
VMSTATE_BUFFER_UNSAFE(data, smc91c111_state, 0, NUM_PACKETS * 2048),
VMSTATE_UINT8(int_level, smc91c111_state),
VMSTATE_UINT8(int_mask, smc91c111_state),
+ VMSTATE_MDIO(mdio_bus, smc91c111_state),
+ VMSTATE_MDIO_PHY(phy, smc91c111_state),
VMSTATE_END_OF_LIST()
}
};
@@ -466,7 +473,15 @@ static void smc91c111_writeb(void *opaque, hwaddr offset,
/* Multicast table. */
/* Not implemented. */
return;
- case 8: case 9: /* Management Interface. */
+ case 8: /* Management Interface. */
+ /* Update MDIO data line status; but only if output is enabled */
+ if (value & 8) {
+ mdio_bitbang_set_data(&s->mdio_bus, !!(value & 1));
+ }
+ /* Process the clock */
+ mdio_bitbang_set_clk(&s->mdio_bus, value & 4);
+ return;
+ case 9: /* Management Interface. */
/* Not implemented. */
return;
case 12: /* Early receive. */
@@ -606,8 +621,7 @@ static uint32_t smc91c111_readb(void *opaque, hwaddr offset)
/* Not implemented. */
return 0;
case 8: /* Management Interface. */
- /* Not implemented. */
- return 0x30;
+ return 0x30 | (mdio_bitbang_get_data(&s->mdio_bus) ? 2 : 0);
case 9:
return 0x33;
case 10: /* Revision. */
@@ -774,6 +788,9 @@ static int smc91c111_init1(SysBusDevice *sbd)
s->nic = qemu_new_nic(&net_smc91c111_info, &s->conf,
object_get_typename(OBJECT(dev)), dev->id, s);
qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
+
+ mdio_phy_init(&s->phy, 0x0016, 0xf84);
+ mdio_attach(&s->mdio_bus, &s->phy, 0);
/* ??? Save/restore. */
return 0;
}
--
2.14.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [Qemu-arm] [Qemu-devel] [PATCH v5 0/7] Generalize MDIO framework
2017-09-22 17:13 ` [Qemu-devel] " Philippe Mathieu-Daudé
@ 2017-09-22 17:19 ` Alistair Francis
-1 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2017-09-22 17:19 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Jason Wang, qemu-devel@nongnu.org Developers,
Alistair Francis, Grant Likely, Stefan Hajnoczi, qemu-arm
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> Hi,
>
> I have a follow up series using multiples PHY on the MDIO bus based on this
> series.
I haven't looked at this yet, but it looks interesting.
We actually have this concept merged in our tree and it works pretty
well. You can see it here:
https://github.com/Xilinx/qemu/tree/master/hw/mdio
Thanks,
Alistair
>
> Regards,
>
> Phil.
>
> Grant's previous work:
> http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg00257.html
>
> "There is more work to be done, particularly in moving to the common GPIO api,
> but that work can be done as a follow on patch series."
>
> Grant Likely (7):
> hw/mdio: Generalize etraxfs MDIO bitbanging emulation
> hw/mdio: Add PHY register definition
> hw/mdio: Generalize phy initialization routine
> hw/mdio: Mask out read-only bits.
> hw/mdio: Refactor bitbanging state machine
> hw/mdio: Add VMState support
> hw/mdio: Use bitbang core for smc91c111 network device
>
> include/hw/net/mdio.h | 124 +++++++++++++++++++++
> hw/net/etraxfs_eth.c | 291 +-----------------------------------------------
> hw/net/mdio.c | 280 ++++++++++++++++++++++++++++++++++++++++++++++
> hw/net/smc91c111.c | 27 ++++-
> hw/net/xilinx_axienet.c | 189 +------------------------------
> hw/net/Makefile.objs | 2 +
> 6 files changed, 438 insertions(+), 475 deletions(-)
> create mode 100644 include/hw/net/mdio.h
> create mode 100644 hw/net/mdio.c
>
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v5 0/7] Generalize MDIO framework
@ 2017-09-22 17:19 ` Alistair Francis
0 siblings, 0 replies; 27+ messages in thread
From: Alistair Francis @ 2017-09-22 17:19 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Grant Likely, Jason Wang, Stefan Hajnoczi,
Edgar E. Iglesias, Alistair Francis, qemu-arm,
qemu-devel@nongnu.org Developers
On Fri, Sep 22, 2017 at 10:13 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> Hi,
>
> I have a follow up series using multiples PHY on the MDIO bus based on this
> series.
I haven't looked at this yet, but it looks interesting.
We actually have this concept merged in our tree and it works pretty
well. You can see it here:
https://github.com/Xilinx/qemu/tree/master/hw/mdio
Thanks,
Alistair
>
> Regards,
>
> Phil.
>
> Grant's previous work:
> http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg00257.html
>
> "There is more work to be done, particularly in moving to the common GPIO api,
> but that work can be done as a follow on patch series."
>
> Grant Likely (7):
> hw/mdio: Generalize etraxfs MDIO bitbanging emulation
> hw/mdio: Add PHY register definition
> hw/mdio: Generalize phy initialization routine
> hw/mdio: Mask out read-only bits.
> hw/mdio: Refactor bitbanging state machine
> hw/mdio: Add VMState support
> hw/mdio: Use bitbang core for smc91c111 network device
>
> include/hw/net/mdio.h | 124 +++++++++++++++++++++
> hw/net/etraxfs_eth.c | 291 +-----------------------------------------------
> hw/net/mdio.c | 280 ++++++++++++++++++++++++++++++++++++++++++++++
> hw/net/smc91c111.c | 27 ++++-
> hw/net/xilinx_axienet.c | 189 +------------------------------
> hw/net/Makefile.objs | 2 +
> 6 files changed, 438 insertions(+), 475 deletions(-)
> create mode 100644 include/hw/net/mdio.h
> create mode 100644 hw/net/mdio.c
>
> --
> 2.14.1
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v5 0/7] Generalize MDIO framework
2017-09-22 17:13 ` [Qemu-devel] " Philippe Mathieu-Daudé
@ 2017-10-09 13:21 ` Edgar E. Iglesias
-1 siblings, 0 replies; 27+ messages in thread
From: Edgar E. Iglesias @ 2017-10-09 13:21 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Jason Wang, qemu-devel, Alistair Francis,
Grant Likely, Stefan Hajnoczi, qemu-arm
On Fri, Sep 22, 2017 at 02:13:16PM -0300, Philippe Mathieu-Daudé wrote:
> Hi,
>
> I have a follow up series using multiples PHY on the MDIO bus based on this
> series.
Hi Philippe!
I think this is a good improvement compared to todays state.
It may make sense to have the generic mdio bus functions in mdio.c
and specific phy models in separate files, thoughts?
Cheers,
Edgar
>
> Regards,
>
> Phil.
>
> Grant's previous work:
> http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg00257.html
>
> "There is more work to be done, particularly in moving to the common GPIO api,
> but that work can be done as a follow on patch series."
>
> Grant Likely (7):
> hw/mdio: Generalize etraxfs MDIO bitbanging emulation
> hw/mdio: Add PHY register definition
> hw/mdio: Generalize phy initialization routine
> hw/mdio: Mask out read-only bits.
> hw/mdio: Refactor bitbanging state machine
> hw/mdio: Add VMState support
> hw/mdio: Use bitbang core for smc91c111 network device
>
> include/hw/net/mdio.h | 124 +++++++++++++++++++++
> hw/net/etraxfs_eth.c | 291 +-----------------------------------------------
> hw/net/mdio.c | 280 ++++++++++++++++++++++++++++++++++++++++++++++
> hw/net/smc91c111.c | 27 ++++-
> hw/net/xilinx_axienet.c | 189 +------------------------------
> hw/net/Makefile.objs | 2 +
> 6 files changed, 438 insertions(+), 475 deletions(-)
> create mode 100644 include/hw/net/mdio.h
> create mode 100644 hw/net/mdio.c
>
> --
> 2.14.1
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v5 0/7] Generalize MDIO framework
@ 2017-10-09 13:21 ` Edgar E. Iglesias
0 siblings, 0 replies; 27+ messages in thread
From: Edgar E. Iglesias @ 2017-10-09 13:21 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Grant Likely, Jason Wang, Stefan Hajnoczi,
Alistair Francis, qemu-devel, qemu-arm
On Fri, Sep 22, 2017 at 02:13:16PM -0300, Philippe Mathieu-Daudé wrote:
> Hi,
>
> I have a follow up series using multiples PHY on the MDIO bus based on this
> series.
Hi Philippe!
I think this is a good improvement compared to todays state.
It may make sense to have the generic mdio bus functions in mdio.c
and specific phy models in separate files, thoughts?
Cheers,
Edgar
>
> Regards,
>
> Phil.
>
> Grant's previous work:
> http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg00257.html
>
> "There is more work to be done, particularly in moving to the common GPIO api,
> but that work can be done as a follow on patch series."
>
> Grant Likely (7):
> hw/mdio: Generalize etraxfs MDIO bitbanging emulation
> hw/mdio: Add PHY register definition
> hw/mdio: Generalize phy initialization routine
> hw/mdio: Mask out read-only bits.
> hw/mdio: Refactor bitbanging state machine
> hw/mdio: Add VMState support
> hw/mdio: Use bitbang core for smc91c111 network device
>
> include/hw/net/mdio.h | 124 +++++++++++++++++++++
> hw/net/etraxfs_eth.c | 291 +-----------------------------------------------
> hw/net/mdio.c | 280 ++++++++++++++++++++++++++++++++++++++++++++++
> hw/net/smc91c111.c | 27 ++++-
> hw/net/xilinx_axienet.c | 189 +------------------------------
> hw/net/Makefile.objs | 2 +
> 6 files changed, 438 insertions(+), 475 deletions(-)
> create mode 100644 include/hw/net/mdio.h
> create mode 100644 hw/net/mdio.c
>
> --
> 2.14.1
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-arm] [PATCH v5 0/7] Generalize MDIO framework
2017-10-09 13:21 ` Edgar E. Iglesias
@ 2018-02-27 23:18 ` Philippe Mathieu-Daudé
-1 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-02-27 23:18 UTC (permalink / raw)
To: Edgar E. Iglesias
Cc: Peter Maydell, Jason Wang, qemu-devel, Alistair Francis,
Grant Likely, Stefan Hajnoczi, qemu-arm
Hi Edgar,
On 10/09/2017 10:21 AM, Edgar E. Iglesias wrote:
> On Fri, Sep 22, 2017 at 02:13:16PM -0300, Philippe Mathieu-Daudé wrote:
>> Hi,
>>
>> I have a follow up series using multiples PHY on the MDIO bus based on this
>> series.
>
> Hi Philippe!
>
> I think this is a good improvement compared to todays state.
> It may make sense to have the generic mdio bus functions in mdio.c
> and specific phy models in separate files, thoughts?
I'm sorry I missed your mail and noticed it today since this thread got
awakened with Alistair's reviews.
I'll raise this series priority in my TODO and respin with Grant correct
S-o-b, Alistair comments addressed and split MDIO/PHY as you suggested.
After spending 2 months with the SD bus, I now fill more confident to
rework the MDIO bus and think of unit testing and tracing.
Regards,
Phil.
>>
>> Grant's previous work:
>> http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg00257.html
>>
>> "There is more work to be done, particularly in moving to the common GPIO api,
>> but that work can be done as a follow on patch series."
>>
>> Grant Likely (7):
>> hw/mdio: Generalize etraxfs MDIO bitbanging emulation
>> hw/mdio: Add PHY register definition
>> hw/mdio: Generalize phy initialization routine
>> hw/mdio: Mask out read-only bits.
>> hw/mdio: Refactor bitbanging state machine
>> hw/mdio: Add VMState support
>> hw/mdio: Use bitbang core for smc91c111 network device
>>
>> include/hw/net/mdio.h | 124 +++++++++++++++++++++
>> hw/net/etraxfs_eth.c | 291 +-----------------------------------------------
>> hw/net/mdio.c | 280 ++++++++++++++++++++++++++++++++++++++++++++++
>> hw/net/smc91c111.c | 27 ++++-
>> hw/net/xilinx_axienet.c | 189 +------------------------------
>> hw/net/Makefile.objs | 2 +
>> 6 files changed, 438 insertions(+), 475 deletions(-)
>> create mode 100644 include/hw/net/mdio.h
>> create mode 100644 hw/net/mdio.c
>>
>> --
>> 2.14.1
>>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v5 0/7] Generalize MDIO framework
@ 2018-02-27 23:18 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2018-02-27 23:18 UTC (permalink / raw)
To: Edgar E. Iglesias
Cc: Peter Maydell, Grant Likely, Jason Wang, Stefan Hajnoczi,
Alistair Francis, qemu-devel, qemu-arm
Hi Edgar,
On 10/09/2017 10:21 AM, Edgar E. Iglesias wrote:
> On Fri, Sep 22, 2017 at 02:13:16PM -0300, Philippe Mathieu-Daudé wrote:
>> Hi,
>>
>> I have a follow up series using multiples PHY on the MDIO bus based on this
>> series.
>
> Hi Philippe!
>
> I think this is a good improvement compared to todays state.
> It may make sense to have the generic mdio bus functions in mdio.c
> and specific phy models in separate files, thoughts?
I'm sorry I missed your mail and noticed it today since this thread got
awakened with Alistair's reviews.
I'll raise this series priority in my TODO and respin with Grant correct
S-o-b, Alistair comments addressed and split MDIO/PHY as you suggested.
After spending 2 months with the SD bus, I now fill more confident to
rework the MDIO bus and think of unit testing and tracing.
Regards,
Phil.
>>
>> Grant's previous work:
>> http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg00257.html
>>
>> "There is more work to be done, particularly in moving to the common GPIO api,
>> but that work can be done as a follow on patch series."
>>
>> Grant Likely (7):
>> hw/mdio: Generalize etraxfs MDIO bitbanging emulation
>> hw/mdio: Add PHY register definition
>> hw/mdio: Generalize phy initialization routine
>> hw/mdio: Mask out read-only bits.
>> hw/mdio: Refactor bitbanging state machine
>> hw/mdio: Add VMState support
>> hw/mdio: Use bitbang core for smc91c111 network device
>>
>> include/hw/net/mdio.h | 124 +++++++++++++++++++++
>> hw/net/etraxfs_eth.c | 291 +-----------------------------------------------
>> hw/net/mdio.c | 280 ++++++++++++++++++++++++++++++++++++++++++++++
>> hw/net/smc91c111.c | 27 ++++-
>> hw/net/xilinx_axienet.c | 189 +------------------------------
>> hw/net/Makefile.objs | 2 +
>> 6 files changed, 438 insertions(+), 475 deletions(-)
>> create mode 100644 include/hw/net/mdio.h
>> create mode 100644 hw/net/mdio.c
>>
>> --
>> 2.14.1
>>
^ permalink raw reply [flat|nested] 27+ messages in thread