* [PULL] Second set of new device support, features and cleanup for IIO in the 4.15 cycle.
@ 2017-10-15 11:28 Jonathan Cameron
2017-10-15 13:46 ` Greg Kroah-Hartman
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2017-10-15 11:28 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-iio
The following changes since commit 1236d6bb6e19fc72ffc6bbcdeb1bfefe450e54ee:
Merge 4.14-rc4 into staging-next (2017-10-09 09:02:35 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.15b
for you to fetch changes up to 11b86c7004ef14f9f8c1e2caf66bfaad6f3167a2:
platform/chrome: Add cros_ec_accel_legacy driver (2017-10-14 20:34:01 +0100)
----------------------------------------------------------------
Second set of IIO new device support, features and cleanup for 4.15
New device support
* cros_ec_accel_legacy
- New driver for this older chromebook accelerometer.
* ds4422 dac driver
- New driver and bindings for the Maxim ds4422 and ds4424 I2C DACs.
* kxcjk1013
- Support the KXTF9 accelerometers.
* mcp320x
- support mcp3550, mcp3551, mcp3553 21 bit ADCs.
* rfd77402
- new driver for this laser range finder.
* st-sensors-accel
- add support for the LIS2DW12 accelerometer with bindings
- add support for the LIS3DHH accelerometer with bindings
New features
* core
- Drop a duplicate forward declaration in iio.h
* Docs
- add a clarification of the meaning of IIO_DISTANCE to reflect
existing use in various range finding devices.
* st-sensors
- add a register mask for the status register to correctly support
2 channel devices.
- decouple the irq1 and irq2 configuration parameters.
- do not always write the enable_axis register as some newer devices
are always on and don't support such configuration.
- split open-drain control for irq1 and irq2
- make sampling frequency control optional as non all hardware
supports it.
* st-sensors-gyro
- support 3 wire SPI mode
* st-sensors-magn
- support 3 wire SPI mode
* st-sensors-pressure
- support 3 wire SPI mode.
Cleanups and fixes
* ad7192
- expand the buffer lock to cover device state protection rather than
using core mlock to provide the state protection.
* ade7753
- expand the buffer lock to cover device state protection as well
rather than having an additional lock.
* dummy-evgen
- Use the new irq_sim infrastructure rather than having our
own local version of the same thing.
* hid-sensor-trigger
- avoid touching sensors ever if user hasn't requested it. This
is a work around for one reported issue where turning a sensor
off wasn't sufficient to make it actually switch off. As we
have only one report from what looks like buggy hardware we
are sending this upstream the slow way.
* ina2xx
- Adhere to the published ABI docs and use Ohms instead of
microohms. We don't think that anyone will notice this ABI fix
but are sending it the slow route to reduce fallout if someone
does!
* kxcjk1013 - refactors to support the KXTF9 being added.
- Refactor ODR support.
- Fix INT_CTRL/INT_SRC1 bit names to match the register name.
- Extract code for reporting motion events as this isn't present
on some parts to be supported.
- Make the sysfs sampling_frequency_available stuff not a fixed
string so as to allow for it to be chip type dependent.
- Make the sampling frequency_available per type to match
the sampling_frequency attributes.
* lsm6dsx - rework prior to new device support.
- express the max fifo depth in 'scans' rather than bytes.
- split control of the fifo mode fifo output data rate.
- move decimator registers into the sensor_settings structure
as this will make it easier to support devices that don't have
this function.
- add a fifo ops datastructure to allow for inter-part variations.
* max30100
- fix i2c chip address in dt example
* max30102
- use correct binding name for max30102 in example
* mma8452
- Rename read/write event value callbacks to be more generic
reflecting what they actually do now.
* rcar-gyroadc
- pointer case to fix warnings when moving to 64 bit as this IP is
present on new 64 bit SOCs
- enable compile-testing to improve build coverage on this driver.
- use the of_device_get_match_data helper instead of open coding
* sun4i-gpadc-iio
- Register in the thermal framework after pm. Otherwise the IP is not
enabled.
- Don't fail probing if no thermal DT node is present.
* tsl2x7x
- renaming tsl2x7x_settings to settings to avoid excessive line
lengths.
- Use IIO core to generate the integration_time sysfs attributes
rather than hand rolling.
* vf6180
- Move the range check on integration time to the setter function.
- Refactor the code around integration time to be clearer including
caching current integration time avoiding unnecessary chip reads.
- cleanup the als_gain lookup avoiding reading registers on chip.
- use rounded matching rather than precise values for als_gain
lookup.
- Correct the ALS scale when non-default gain or integration time
is used.
----------------------------------------------------------------
Aastha Gupta (1):
staging: iio: adc: ad7192: use driver private lock to protect hardware state changes
Bartosz Golaszewski (1):
iio: dummy: evgen: use irq_sim
Brian Masney (2):
staging: iio: tsl2x7x: rename tsl2x7x_settings variable to settings
staging: iio: tsl2x7x: migrate in_illuminance0_integration_time sysfs attribute to iio_chan_spec
Geert Uytterhoeven (3):
iio: adc: rcar-gyroadc: Cast pointer to uintptr_t to fix warning on 64-bit
iio: adc: rcar-gyroadc: Enable compile-testing on non-ARM
iio: adc: rcar-gyroadc: Use of_device_get_match_data() helper
Gwendal Grignou (1):
platform/chrome: Add cros_ec_accel_legacy driver
Harinath Nampally (1):
iio: accel: mma8452: Rename read/write event value callbacks to generic function name.
Himanshi Jain (1):
staging: iio: ade7753: expanding buffer lock to cover both buffer and state protection
Ismail H. Kose (2):
iio:dac: Add DT binding documentation for ds4424
iio: dac: ds4422/ds4424 dac driver
Lorenzo Bianconi (16):
iio: imu: st_lsm6dsx: convert max_fifo_size in FIFO sample size
iio: imu: st_lsm6dsx: split fifo mode and fifo odr configuration
iio: imu: st_lsm6dsx: move decimator info in st_lsm6dsx_sensor_settings
iio: imu: st_lsm6dsx: add FIFO ops data structure
iio: st_sensors: add register mask for status register
iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
iio: st_sensors: do not always write enable_axis register
iio: accel: add support to LIS2DW12
dt-bindings: iio: accel: add LIS2DW12 sensor device binding
iio: gyro: st_gyro: add SPI-3wire support to st_gyro framework
iio: magnetometer: st_magn: add SPI-3wire support to LIS3MDL
iio: pressure: st_pressure: add SPI-3wire support to st_pressure framework
iio: st_sensors: split open-drain parameters for irq1 and irq2
iio: common: st_sensors: check odr address value in st_sensors_set_odr()
iio: accel: add support to LIS3DHH
dt-bindings: iio: accel: add LIS3DHH device bindings
Lukas Wunner (2):
iio: adc: mcp320x: Add support for mcp3550/1/3
iio: Drop duplicate forward declaration
Michał Mirosław (6):
iio: accel: kxcjk1003: refactor ODR setting
iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit names
iio: accel: kxcjk1013: extract report_motion_event() from interrupt handler
iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
iio: accel: kxcjk1013: make sampling_frequency_avail per-type
iio: accel: kxcjk1013: add support for KXTF9
Peter Meerwald-Stadler (4):
Documentation: iio: Clarify meaning of IIO_DISTANCE channel type
iio: proximity: Add rfd77402 driver
dt-bindings: iio: health: Fix max30100 I2C chip address in example
dt-bindings: iio: health: Use binding name for max30102 in example
Quentin Schulz (2):
iio: adc: sun4i-gpadc-iio: register in the thermal after registering in pm
iio: adc: sun4i-gpadc-iio: do not fail probing when no thermal DT node
Srinivas Pandruvada (1):
iio: hid-sensor-trigger: Don't touch sensors unless user space requests
Stefan Brüns (5):
iio: light: vl6180: Move range check to integration time setter, cleanup
iio: light: vl6180: Avoid readback of integration time register
iio: light: vl6180: Cleanup als_gain lookup, avoid register readback
iio: light: vl6180: Correct ALS scale for non-default gain/integration time
iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm
Documentation/ABI/testing/sysfs-bus-iio | 6 +-
Documentation/ABI/testing/sysfs-bus-iio-cros-ec | 10 +
.../devicetree/bindings/iio/dac/ds4424.txt | 20 +
.../devicetree/bindings/iio/health/max30100.txt | 4 +-
.../devicetree/bindings/iio/health/max30102.txt | 2 +-
.../devicetree/bindings/iio/st-sensors.txt | 2 +
drivers/iio/accel/Kconfig | 15 +-
drivers/iio/accel/Makefile | 2 +
drivers/iio/accel/cros_ec_accel_legacy.c | 423 +++++++++++++++++++++
drivers/iio/accel/kxcjk-1013.c | 354 ++++++++++-------
drivers/iio/accel/mma8452.c | 8 +-
drivers/iio/accel/st_accel.h | 4 +
drivers/iio/accel/st_accel_core.c | 246 ++++++++++--
drivers/iio/accel/st_accel_i2c.c | 5 +
drivers/iio/accel/st_accel_spi.c | 10 +
drivers/iio/adc/Kconfig | 7 +-
drivers/iio/adc/ina2xx-adc.c | 18 +-
drivers/iio/adc/mcp320x.c | 120 +++++-
drivers/iio/adc/rcar-gyroadc.c | 7 +-
drivers/iio/adc/sun4i-gpadc-iio.c | 38 +-
.../iio/common/hid-sensors/hid-sensor-trigger.c | 12 +-
drivers/iio/common/st_sensors/st_sensors_core.c | 59 ++-
drivers/iio/common/st_sensors/st_sensors_trigger.c | 16 +-
drivers/iio/dac/Kconfig | 9 +
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/ds4424.c | 341 +++++++++++++++++
drivers/iio/dummy/Kconfig | 2 +-
drivers/iio/dummy/iio_dummy_evgen.c | 89 +----
drivers/iio/gyro/st_gyro_core.c | 45 ++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 32 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 72 ++--
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 78 +++-
drivers/iio/light/vl6180.c | 126 +++---
drivers/iio/magnetometer/st_magn_core.c | 20 +-
drivers/iio/pressure/st_pressure_core.c | 74 +++-
drivers/iio/proximity/Kconfig | 10 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/rfd77402.c | 352 +++++++++++++++++
drivers/staging/iio/adc/ad7192.c | 9 +-
drivers/staging/iio/light/tsl2x7x.c | 242 +++++-------
drivers/staging/iio/meter/ade7753.c | 29 +-
include/linux/hid-sensor-hub.h | 1 +
include/linux/iio/common/st_sensors.h | 35 +-
include/linux/iio/iio.h | 1 -
44 files changed, 2330 insertions(+), 627 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/dac/ds4424.txt
create mode 100644 drivers/iio/accel/cros_ec_accel_legacy.c
create mode 100644 drivers/iio/dac/ds4424.c
create mode 100644 drivers/iio/proximity/rfd77402.c
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] Second set of new device support, features and cleanup for IIO in the 4.15 cycle.
2017-10-15 11:28 [PULL] Second set of new device support, features and cleanup for IIO in the 4.15 cycle Jonathan Cameron
@ 2017-10-15 13:46 ` Greg Kroah-Hartman
0 siblings, 0 replies; 2+ messages in thread
From: Greg Kroah-Hartman @ 2017-10-15 13:46 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sun, Oct 15, 2017 at 12:28:11PM +0100, Jonathan Cameron wrote:
> The following changes since commit 1236d6bb6e19fc72ffc6bbcdeb1bfefe450e54ee:
>
> Merge 4.14-rc4 into staging-next (2017-10-09 09:02:35 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.15b
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-10-15 13:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-15 11:28 [PULL] Second set of new device support, features and cleanup for IIO in the 4.15 cycle Jonathan Cameron
2017-10-15 13:46 ` Greg Kroah-Hartman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.