Re: [PATCH 2/9] drm/panel: simple: simplify display_mode definitions by using macro

[Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 2304 bytes --]

On Wed, Oct 11, 2017 at 01:23:34PM +0200, Lothar Waßmann wrote:
> Use the newly defined macro to generate the display_mode data entries
> for all panels. This reduces the code size significantly and makes the
> code more readable.
> 
> Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 799 ++++++-----------------------------
>  1 file changed, 134 insertions(+), 665 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index dec639d..fde9c41 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -89,6 +89,20 @@ struct panel_simple {
>  	struct gpio_desc *enable_gpio;
>  };
>  
> +#define SP_DISPLAY_MODE(freq, ha, hfp, hs, hbp, va, vfp, vs, vbp, vr, flgs) { \
> +	.clock = freq,							\
> +	.hdisplay = ha,							\
> +	.hsync_start = (ha) + (hfp),					\
> +	.hsync_end = (ha) + (hfp) + (hs),				\
> +	.htotal = (ha) + (hfp) + (hs) + (hbp),				\
> +	.vdisplay = (va),						\
> +	.vsync_start = (va) + (vfp),					\
> +	.vsync_end = (va) + (vfp) + (vs),				\
> +	.vtotal = (va) + (vfp) + (vs) + (vbp),				\
> +	.vrefresh = vr,							\
> +	.flags = flgs,							\
> +}
> +
>  static inline struct panel_simple *to_panel_simple(struct drm_panel *panel)
>  {
>  	return container_of(panel, struct panel_simple, base);
[...]
> @@ -411,33 +415,9 @@ static const struct panel_desc ampire_am_480272h3tmqw_t01h = {
>  	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
>  };
>  
> -#define SP_DISPLAY_MODE(freq, ha, hfp, hs, hbp, va, vfp, vs, vbp, vr, flgs) { \
> -	.clock = freq,							\
> -	.hdisplay = ha,							\
> -	.hsync_start = (ha) + (hfp),					\
> -	.hsync_end = (ha) + (hfp) + (hs),				\
> -	.htotal = (ha) + (hfp) + (hs) + (hbp),				\
> -	.vdisplay = (va),						\
> -	.vsync_start = (va) + (vfp),					\
> -	.vsync_end = (va) + (vfp) + (vs),				\
> -	.vtotal = (va) + (vfp) + (vs) + (vbp),				\
> -	.vrefresh = vr,							\
> -	.flags = flgs,							\
> -	}

Your first patch should put this in the right place to begin with so
that this patch is really just the conversion.

Again, I don't think this macro actually improves the way modes are
defined.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]