Re: [PATCH v2 4/5] ARM: dts: imx6sx: Use nvmem-cells for tempmon

[Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On Fri, Jul 14, 2017 at 05:11:09PM +0300, Leonard Crestez wrote:
> On imx6sx accessing OCOTP directly is wrong because the ocotp clock
> needs to be enabled first. Use the nvmem-cells binding instead.
> 
> This requirement does not apply to older imx6qdl chips because there the
> ocotp access clock (clk_ipg_s) is always enabled.
> 
> This is visible by comparing the "System Clocks, Gating, and Override"
> tables (OCOTP rows) in the 6DQ and 6SX manuals:
> http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6SXRM.pdf
> http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
> 
> This happens to work right now because the ocotp clock might be enabled
> for some other reason. In particular the it might be enabled from the
> bootloader and it only gets disabled late during boot in
> clk_disable_unused, after imx-thermal has completed probing.
> 
> If imx-thermal is compiled as a module then the system can hang on
> probe.
> 
> Reported-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
> Signed-off-by: Leonard Crestez <leonard.crestez-3arQi8VN3Tc@public.gmane.org>

I applied patch #4 and #5 to IMX tree for avoiding merge conflict.  Rui
will drop them from thermal tree.

Shawn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html