[GIT PULL for-4.4 00/25] Commits for v4.4 LTS

[GIT PULL for-4.4 00/25] Commits for v4.4 LTS

[Levin, Alexander (Sasha Levin)]

Hi Greg,

The following commits were sent for review 7+ days ago, and comments were addressed.

Please pull for v4.4 LTS.

===

The following changes since commit c030c36a88cdc54a5d657c0a2ee630ba495d5538:

  Linux 4.4.91 (2017-10-08 10:24:24 +0200)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git for-greg-4.4

for you to fetch changes up to 5e1c58170e54cfe245176b0db500035f7fa7fdad:

  cpufreq: CPPC: add ACPI_PROCESSOR dependency (2017-10-10 20:18:53 -0400)

----------------------------------------------------------------

Alexandre Belloni (1):
  i2c: at91: ensure state is restored after suspending

Arnd Bergmann (2):
  watchdog: kempld: fix gcc-4.3 build
  cpufreq: CPPC: add ACPI_PROCESSOR dependency

Christophe JAILLET (1):
  iio: adc: xilinx: Fix error handling

Dan Carpenter (1):
  scsi: scsi_dh_emc: return success in clariion_std_inquiry()

Dmitry V. Levin (2):
  uapi: fix linux/rds.h userspace compilation errors
  uapi: fix linux/mroute6.h userspace compilation errors

Emmanuel Grumbach (1):
  mac80211: fix power saving clients handling in iwlwifi

Eric Dumazet (1):
  net/mlx4_en: fix overflow in mlx4_en_init_timestamp()

Eric Ren (1):
  ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock

Franck Demathieu (1):
  irqchip/crossbar: Fix incorrect type of local variables

Grygorii Maistrenko (1):
  slub: do not merge cache if slub_debug contains a never-merge flag

Jaegeuk Kim (1):
  f2fs: do not wait for writeback in write_begin

Jarno Rajahalme (1):
  netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.

Jeff Layton (1):
  ceph: clean up unsafe d_parent accesses in build_dentry_path

Johannes Berg (1):
  mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length

Kinglong Mee (1):
  nfsd/callback: Cleanup callback cred on shutdown

Majd Dibbiny (1):
  net/mlx4_core: Fix VF overwrite of module param which disables DMFS on
    new probed PFs

Milan Broz (1):
  crypto: xts - Add ECB dependency

Peter Zijlstra (1):
  locking/lockdep: Add nest_lock integrity test

Robbie Ko (1):
  Btrfs: send, fix failure to rename top level inode due to name
    collision

Shaohua Li (1):
  md/linear: shutup lockdep warnning

Thomas Petazzoni (1):
  net: mvpp2: release reference to txq_cpu[] entry after unmapping

Varun Prakash (1):
  target/iscsi: Fix unsolicited data seq_end_offset calculation

Vijay Kumar (1):
  sparc64: Migrate hvcons irq to panicked cpu

 arch/sparc/include/asm/setup.h                |   5 +-
 arch/sparc/kernel/smp_64.c                    |   6 +-
 crypto/Kconfig                                |   1 +
 drivers/cpufreq/Kconfig.arm                   |   2 +-
 drivers/i2c/busses/i2c-at91.c                 |   3 +
 drivers/iio/adc/xilinx-xadc-core.c            |   6 +-
 drivers/irqchip/irq-crossbar.c                |   3 +-
 drivers/md/linear.c                           |   3 +-
 drivers/net/ethernet/marvell/mvpp2.c          |   9 +--
 drivers/net/ethernet/mellanox/mlx4/en_clock.c |  18 ++---
 drivers/net/ethernet/mellanox/mlx4/main.c     |   2 -
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h  |   1 -
 drivers/net/wireless/mac80211_hwsim.c         |  28 +++++--
 drivers/scsi/device_handler/scsi_dh_emc.c     |   2 +-
 drivers/target/iscsi/iscsi_target_erl0.c      |   6 +-
 drivers/tty/serial/sunhv.c                    |   6 ++
 drivers/watchdog/kempld_wdt.c                 |   9 ++-
 fs/btrfs/send.c                               |   5 +-
 fs/ceph/mds_client.c                          |   9 ++-
 fs/f2fs/data.c                                |   7 +-
 fs/nfsd/nfs4callback.c                        |   8 ++
 fs/nfsd/nfs4state.c                           |  10 ++-
 fs/nfsd/state.h                               |   1 +
 fs/ocfs2/dlmglue.c                            | 105 +++++++++++++++++++++++++-
 fs/ocfs2/dlmglue.h                            |  18 +++++
 fs/ocfs2/ocfs2.h                              |   1 +
 include/uapi/linux/mroute6.h                  |   1 +
 include/uapi/linux/rds.h                      |   3 +-
 kernel/locking/lockdep.c                      |  11 ++-
 mm/slab_common.c                              |   5 +-
 net/mac80211/sta_info.c                       |   2 +-
 net/netfilter/nf_conntrack_expect.c           |   4 +-
 32 files changed, 243 insertions(+), 57 deletions(-)

-- 
2.11.0

[GIT PULL for-4.4 01/25] locking/lockdep: Add nest_lock integrity test

[Levin, Alexander (Sasha Levin)]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 7fb4a2cea6b18dab56d609530d077f168169ed6b ]

Boqun reported that hlock->references can overflow. Add a debug test
for that to generate a clear error when this happens.

Without this, lockdep is likely to report a mysterious failure on
unlock.

Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicolai Hähnle <Nicolai.Haehnle@amd.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 kernel/locking/lockdep.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 60ace56618f6..0e2c4911ba61 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3128,10 +3128,17 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	if (depth) {
 		hlock = curr->held_locks + depth - 1;
 		if (hlock->class_idx == class_idx && nest_lock) {
-			if (hlock->references)
+			if (hlock->references) {
+				/*
+				 * Check: unsigned int references:12, overflow.
+				 */
+				if (DEBUG_LOCKS_WARN_ON(hlock->references == (1 << 12)-1))
+					return 0;
+
 				hlock->references++;
-			else
+			} else {
 				hlock->references = 2;
+			}
 
 			return 1;
 		}
-- 
2.11.0

[GIT PULL for-4.4 02/25] watchdog: kempld: fix gcc-4.3 build

[Levin, Alexander (Sasha Levin)]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 3736d4eb6af37492aeded7fec0072dedd959c842 ]

gcc-4.3 can't decide whether the constant value in
kempld_prescaler[PRESCALER_21] is built-time constant or
not, and gets confused by the logic in do_div():

drivers/watchdog/kempld_wdt.o: In function `kempld_wdt_set_stage_timeout':
kempld_wdt.c:(.text.kempld_wdt_set_stage_timeout+0x130): undefined reference to `__aeabi_uldivmod'

This adds a call to ACCESS_ONCE() to force it to not consider
it to be constant, and leaves the more efficient normal case
in place for modern compilers, using an #ifdef to annotate
why we do this hack.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/watchdog/kempld_wdt.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c
index 5bf931ce1353..978098f71761 100644
--- a/drivers/watchdog/kempld_wdt.c
+++ b/drivers/watchdog/kempld_wdt.c
@@ -140,12 +140,19 @@ static int kempld_wdt_set_stage_timeout(struct kempld_wdt_data *wdt_data,
 					unsigned int timeout)
 {
 	struct kempld_device_data *pld = wdt_data->pld;
-	u32 prescaler = kempld_prescaler[PRESCALER_21];
+	u32 prescaler;
 	u64 stage_timeout64;
 	u32 stage_timeout;
 	u32 remainder;
 	u8 stage_cfg;
 
+#if GCC_VERSION < 40400
+	/* work around a bug compiling do_div() */
+	prescaler = READ_ONCE(kempld_prescaler[PRESCALER_21]);
+#else
+	prescaler = kempld_prescaler[PRESCALER_21];
+#endif
+
 	if (!stage)
 		return -EINVAL;
 
-- 
2.11.0

[GIT PULL for-4.4 05/25] mac80211: fix power saving clients handling in iwlwifi

[Levin, Alexander (Sasha Levin)]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit d98937f4ea713d21e0fcc345919f86c877dd8d6f ]

iwlwifi now supports RSS and can't let mac80211 track the
PS state based on the Rx frames since they can come out of
order. iwlwifi is now advertising AP_LINK_PS, and uses
explicit notifications to teach mac80211 about the PS state
of the stations and the PS poll / uAPSD trigger frames
coming our way from the peers.

Because of that, the TIM stopped being maintained in
mac80211. I tried to fix this in commit c68df2e7be0c
("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
but that was later reverted by Felix in commit 6c18a6b4e799
("Revert "mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
since it broke drivers that do not implement set_tim.

Since none of the drivers that set AP_LINK_PS have the
set_tim() handler set besides iwlwifi, I can bail out in
__sta_info_recalc_tim if AP_LINK_PS AND .set_tim is not
implemented.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/mac80211/sta_info.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 63ea6cbac5ad..7e7b9ef29d8d 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -661,7 +661,7 @@ static void __sta_info_recalc_tim(struct sta_info *sta, bool ignore_pending)
 	}
 
 	/* No need to do anything if the driver does all */
-	if (ieee80211_hw_check(&local->hw, AP_LINK_PS))
+	if (ieee80211_hw_check(&local->hw, AP_LINK_PS) && !local->ops->set_tim)
 		return;
 
 	if (sta->dead)
-- 
2.11.0

[GIT PULL for-4.4 03/25] irqchip/crossbar: Fix incorrect type of local variables

[Levin, Alexander (Sasha Levin)]

From: Franck Demathieu <fdemathieu@gmail.com>

[ Upstream commit b28ace12661fbcfd90959c1e84ff5a85113a82a1 ]

The max and entry variables are unsigned according to the dt-bindings.
Fix following 3 sparse issues (-Wtypesign):

  drivers/irqchip/irq-crossbar.c:222:52: warning: incorrect type in argument 3 (different signedness)
  drivers/irqchip/irq-crossbar.c:222:52:    expected unsigned int [usertype] *out_value
  drivers/irqchip/irq-crossbar.c:222:52:    got int *<noident>

  drivers/irqchip/irq-crossbar.c:245:56: warning: incorrect type in argument 4 (different signedness)
  drivers/irqchip/irq-crossbar.c:245:56:    expected unsigned int [usertype] *out_value
  drivers/irqchip/irq-crossbar.c:245:56:    got int *<noident>

  drivers/irqchip/irq-crossbar.c:263:56: warning: incorrect type in argument 4 (different signedness)
  drivers/irqchip/irq-crossbar.c:263:56:    expected unsigned int [usertype] *out_value
  drivers/irqchip/irq-crossbar.c:263:56:    got int *<noident>

Signed-off-by: Franck Demathieu <fdemathieu@gmail.com>
Cc: marc.zyngier@arm.com
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/20170223094855.6546-1-fdemathieu@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/irqchip/irq-crossbar.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index 75573fa431ba..63faee04a008 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -198,7 +198,8 @@ static const struct irq_domain_ops crossbar_domain_ops = {
 
 static int __init crossbar_of_init(struct device_node *node)
 {
-	int i, size, max = 0, reserved = 0, entry;
+	int i, size, reserved = 0;
+	u32 max = 0, entry;
 	const __be32 *irqsr;
 	int ret = -ENOMEM;
 
-- 
2.11.0

[GIT PULL for-4.4 04/25] mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length

[Levin, Alexander (Sasha Levin)]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit ff4dd73dd2b4806419f8ff65cbce11d5019548d0 ]

Unfortunately, the nla policy was defined to have HWSIM_ATTR_RADIO_NAME
as an NLA_STRING, rather than NLA_NUL_STRING, so we can't use it as a
NUL-terminated string in the kernel.

Rather than break the API, kasprintf() the string to a new buffer to
guarantee NUL termination.

Reported-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 019d7165a045..2a996a68fc2b 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2884,6 +2884,7 @@ static int hwsim_register_received_nl(struct sk_buff *skb_2,
 static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info)
 {
 	struct hwsim_new_radio_params param = { 0 };
+	const char *hwname = NULL;
 
 	param.reg_strict = info->attrs[HWSIM_ATTR_REG_STRICT_REG];
 	param.p2p_device = info->attrs[HWSIM_ATTR_SUPPORT_P2P_DEVICE];
@@ -2897,8 +2898,14 @@ static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	if (info->attrs[HWSIM_ATTR_NO_VIF])
 		param.no_vif = true;
 
-	if (info->attrs[HWSIM_ATTR_RADIO_NAME])
-		param.hwname = nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]);
+	if (info->attrs[HWSIM_ATTR_RADIO_NAME]) {
+		hwname = kasprintf(GFP_KERNEL, "%.*s",
+				   nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+				   (char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]));
+		if (!hwname)
+			return -ENOMEM;
+		param.hwname = hwname;
+	}
 
 	if (info->attrs[HWSIM_ATTR_USE_CHANCTX])
 		param.use_chanctx = true;
@@ -2926,11 +2933,15 @@ static int hwsim_del_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	s64 idx = -1;
 	const char *hwname = NULL;
 
-	if (info->attrs[HWSIM_ATTR_RADIO_ID])
+	if (info->attrs[HWSIM_ATTR_RADIO_ID]) {
 		idx = nla_get_u32(info->attrs[HWSIM_ATTR_RADIO_ID]);
-	else if (info->attrs[HWSIM_ATTR_RADIO_NAME])
-		hwname = (void *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]);
-	else
+	} else if (info->attrs[HWSIM_ATTR_RADIO_NAME]) {
+		hwname = kasprintf(GFP_KERNEL, "%.*s",
+				   nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+				   (char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]));
+		if (!hwname)
+			return -ENOMEM;
+	} else
 		return -EINVAL;
 
 	spin_lock_bh(&hwsim_radio_lock);
@@ -2939,7 +2950,8 @@ static int hwsim_del_radio_nl(struct sk_buff *msg, struct genl_info *info)
 			if (data->idx != idx)
 				continue;
 		} else {
-			if (strcmp(hwname, wiphy_name(data->hw->wiphy)))
+			if (!hwname ||
+			    strcmp(hwname, wiphy_name(data->hw->wiphy)))
 				continue;
 		}
 
@@ -2947,10 +2959,12 @@ static int hwsim_del_radio_nl(struct sk_buff *msg, struct genl_info *info)
 		spin_unlock_bh(&hwsim_radio_lock);
 		mac80211_hwsim_del_radio(data, wiphy_name(data->hw->wiphy),
 					 info);
+		kfree(hwname);
 		return 0;
 	}
 	spin_unlock_bh(&hwsim_radio_lock);
 
+	kfree(hwname);
 	return -ENODEV;
 }
 
-- 
2.11.0

[GIT PULL for-4.4 09/25] Btrfs: send, fix failure to rename top level inode due to name collision

[Levin, Alexander (Sasha Levin)]

From: Robbie Ko <robbieko@synology.com>

[ Upstream commit 4dd9920d991745c4a16f53a8f615f706fbe4b3f7 ]

Under certain situations, an incremental send operation can fail due to a
premature attempt to create a new top level inode (a direct child of the
subvolume/snapshot root) whose name collides with another inode that was
removed from the send snapshot.

Consider the following example scenario.

Parent snapshot:

  .                 (ino 256, gen 8)
  |---- a1/         (ino 257, gen 9)
  |---- a2/         (ino 258, gen 9)

Send snapshot:

  .                 (ino 256, gen 3)
  |---- a2/         (ino 257, gen 7)

In this scenario, when receiving the incremental send stream, the btrfs
receive command fails like this (ran in verbose mode, -vv argument):

  rmdir a1
  mkfile o257-7-0
  rename o257-7-0 -> a2
  ERROR: rename o257-7-0 -> a2 failed: Is a directory

What happens when computing the incremental send stream is:

1) An operation to remove the directory with inode number 257 and
   generation 9 is issued.

2) An operation to create the inode with number 257 and generation 7 is
   issued. This creates the inode with an orphanized name of "o257-7-0".

3) An operation rename the new inode 257 to its final name, "a2", is
   issued. This is incorrect because inode 258, which has the same name
   and it's a child of the same parent (root inode 256), was not yet
   processed and therefore no rmdir operation for it was yet issued.
   The rename operation is issued because we fail to detect that the
   name of the new inode 257 collides with inode 258, because their
   parent, a subvolume/snapshot root (inode 256) has a different
   generation in both snapshots.

So fix this by ignoring the generation value of a parent directory that
matches a root inode (number 256) when we are checking if the name of the
inode currently being processed collides with the name of some other
inode that was not yet processed.

We can achieve this scenario of different inodes with the same number but
different generation values either by mounting a filesystem with the inode
cache option (-o inode_cache) or by creating and sending snapshots across
different filesystems, like in the following example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt
  $ mkdir /mnt/a1
  $ mkdir /mnt/a2
  $ btrfs subvolume snapshot -r /mnt /mnt/snap1
  $ btrfs send /mnt/snap1 -f /tmp/1.snap
  $ umount /mnt

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ touch /mnt/a2
  $ btrfs subvolume snapshot -r /mnt /mnt/snap2
  $ btrfs receive /mnt -f /tmp/1.snap
  # Take note that once the filesystem is created, its current
  # generation has value 7 so the inode from the second snapshot has
  # a generation value of 7. And after receiving the first snapshot
  # the filesystem is at a generation value of 10, because the call to
  # create the second snapshot bumps the generation to 8 (the snapshot
  # creation ioctl does a transaction commit), the receive command calls
  # the snapshot creation ioctl to create the first snapshot, which bumps
  # the filesystem's generation to 9, and finally when the receive
  # operation finishes it calls an ioctl to transition the first snapshot
  # (snap1) from RW mode to RO mode, which does another transaction commit
  # and bumps the filesystem's generation to 10.
  $ rm -f /tmp/1.snap
  $ btrfs send /mnt/snap1 -f /tmp/1.snap
  $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
  $ umount /mnt

  $ mkfs.btrfs -f /dev/sdd
  $ mount /dev/sdd /mnt
  $ btrfs receive /mnt /tmp/1.snap
  # Receive of snapshot snap2 used to fail.
  $ btrfs receive /mnt /tmp/2.snap

Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Rewrote changelog to be more precise and clear]
Signed-off-by: Filipe Manana <fdmanana@suse.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/btrfs/send.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 63a6152be04b..c5bbb5300658 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -1648,6 +1648,9 @@ static int is_inode_existent(struct send_ctx *sctx, u64 ino, u64 gen)
 {
 	int ret;
 
+	if (ino == BTRFS_FIRST_FREE_OBJECTID)
+		return 1;
+
 	ret = get_cur_inode_state(sctx, ino, gen);
 	if (ret < 0)
 		goto out;
@@ -1833,7 +1836,7 @@ static int will_overwrite_ref(struct send_ctx *sctx, u64 dir, u64 dir_gen,
 	 * not delted and then re-created, if it was then we have no overwrite
 	 * and we can just unlink this entry.
 	 */
-	if (sctx->parent_root) {
+	if (sctx->parent_root && dir != BTRFS_FIRST_FREE_OBJECTID) {
 		ret = get_inode_info(sctx->parent_root, dir, NULL, &gen, NULL,
 				     NULL, NULL, NULL);
 		if (ret < 0 && ret != -ENOENT)
-- 
2.11.0

[GIT PULL for-4.4 06/25] net/mlx4_en: fix overflow in mlx4_en_init_timestamp()

[Levin, Alexander (Sasha Levin)]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 47d3a07528ecbbccf53bc4390d70b4e3d1c04fcf ]

The cited commit makes a great job of finding optimal shift/multiplier
values assuming a 10 seconds wrap around, but forgot to change the
overflow_period computation.

It overflows in cyclecounter_cyc2ns(), and the final result is 804 ms,
which is silly.

Lets simply use 5 seconds, no need to recompute this, given how it is
supposed to work.

Later, we will use a timer instead of a work queue, since the new RX
allocation schem will no longer need mlx4_en_recover_from_oom() and the
service_task firing every 250 ms.

Fixes: 31c128b66e5b ("net/mlx4_en: Choose time-stamping shift value according to HW frequency")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_clock.c | 18 ++++++++----------
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h  |  1 -
 2 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
index 1494997c4f7e..4dccf7287f0f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
@@ -88,10 +88,17 @@ void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev)
 	}
 }
 
+#define MLX4_EN_WRAP_AROUND_SEC	10UL
+/* By scheduling the overflow check every 5 seconds, we have a reasonably
+ * good chance we wont miss a wrap around.
+ * TOTO: Use a timer instead of a work queue to increase the guarantee.
+ */
+#define MLX4_EN_OVERFLOW_PERIOD (MLX4_EN_WRAP_AROUND_SEC * HZ / 2)
+
 void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev)
 {
 	bool timeout = time_is_before_jiffies(mdev->last_overflow_check +
-					      mdev->overflow_period);
+					      MLX4_EN_OVERFLOW_PERIOD);
 	unsigned long flags;
 
 	if (timeout) {
@@ -236,7 +243,6 @@ static const struct ptp_clock_info mlx4_en_ptp_clock_info = {
 	.enable		= mlx4_en_phc_enable,
 };
 
-#define MLX4_EN_WRAP_AROUND_SEC	10ULL
 
 /* This function calculates the max shift that enables the user range
  * of MLX4_EN_WRAP_AROUND_SEC values in the cycles register.
@@ -258,7 +264,6 @@ void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev)
 {
 	struct mlx4_dev *dev = mdev->dev;
 	unsigned long flags;
-	u64 ns, zero = 0;
 
 	/* mlx4_en_init_timestamp is called for each netdev.
 	 * mdev->ptp_clock is common for all ports, skip initialization if
@@ -282,13 +287,6 @@ void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev)
 			 ktime_to_ns(ktime_get_real()));
 	write_unlock_irqrestore(&mdev->clock_lock, flags);
 
-	/* Calculate period in seconds to call the overflow watchdog - to make
-	 * sure counter is checked at least once every wrap around.
-	 */
-	ns = cyclecounter_cyc2ns(&mdev->cycles, mdev->cycles.mask, zero, &zero);
-	do_div(ns, NSEC_PER_SEC / 2 / HZ);
-	mdev->overflow_period = ns;
-
 	/* Configure the PHC */
 	mdev->ptp_clock_info = mlx4_en_ptp_clock_info;
 	snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp");
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index c41f15102ae0..10aa6544cf4d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -409,7 +409,6 @@ struct mlx4_en_dev {
 	struct cyclecounter	cycles;
 	struct timecounter	clock;
 	unsigned long		last_overflow_check;
-	unsigned long		overflow_period;
 	struct ptp_clock	*ptp_clock;
 	struct ptp_clock_info	ptp_clock_info;
 	struct notifier_block	nb;
-- 
2.11.0

[GIT PULL for-4.4 08/25] iio: adc: xilinx: Fix error handling

[Levin, Alexander (Sasha Levin)]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ca1c39ef76376b67303d01f94fe98bb68bb3861a ]

Reorder error handling labels in order to match the way resources have
been allocated.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/iio/adc/xilinx-xadc-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 02e636a1c49a..475c5a74f2d1 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1208,7 +1208,7 @@ static int xadc_probe(struct platform_device *pdev)
 
 	ret = xadc->ops->setup(pdev, indio_dev, irq);
 	if (ret)
-		goto err_free_samplerate_trigger;
+		goto err_clk_disable_unprepare;
 
 	ret = request_irq(irq, xadc->ops->interrupt_handler, 0,
 			dev_name(&pdev->dev), indio_dev);
@@ -1268,6 +1268,8 @@ static int xadc_probe(struct platform_device *pdev)
 
 err_free_irq:
 	free_irq(irq, indio_dev);
+err_clk_disable_unprepare:
+	clk_disable_unprepare(xadc->clk);
 err_free_samplerate_trigger:
 	if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
 		iio_trigger_free(xadc->samplerate_trigger);
@@ -1277,8 +1279,6 @@ err_free_convst_trigger:
 err_triggered_buffer_cleanup:
 	if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
 		iio_triggered_buffer_cleanup(indio_dev);
-err_clk_disable_unprepare:
-	clk_disable_unprepare(xadc->clk);
 err_device_free:
 	kfree(indio_dev->channels);
 
-- 
2.11.0

[GIT PULL for-4.4 07/25] netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.

[Levin, Alexander (Sasha Levin)]

From: Jarno Rajahalme <jarno@ovn.org>

[ Upstream commit 4b86c459c7bee3acaf92f0e2b4c6ac803eaa1a58 ]

Commit 4dee62b1b9b4 ("netfilter: nf_ct_expect: nf_ct_expect_insert()
returns void") inadvertently changed the successful return value of
nf_ct_expect_related_report() from 0 to 1 due to
__nf_ct_expect_check() returning 1 on success.  Prevent this
regression in the future by changing the return value of
__nf_ct_expect_check() to 0 on success.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/netfilter/nf_conntrack_expect.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index acf5c7b3f378..7f16d19d6198 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -395,7 +395,7 @@ static inline int __nf_ct_expect_check(struct nf_conntrack_expect *expect)
 	struct net *net = nf_ct_exp_net(expect);
 	struct hlist_node *next;
 	unsigned int h;
-	int ret = 1;
+	int ret = 0;
 
 	if (!master_help) {
 		ret = -ESHUTDOWN;
@@ -445,7 +445,7 @@ int nf_ct_expect_related_report(struct nf_conntrack_expect *expect,
 
 	spin_lock_bh(&nf_conntrack_expect_lock);
 	ret = __nf_ct_expect_check(expect);
-	if (ret <= 0)
+	if (ret < 0)
 		goto out;
 
 	ret = nf_ct_expect_insert(expect);
-- 
2.11.0

[GIT PULL for-4.4 10/25] f2fs: do not wait for writeback in write_begin

[Levin, Alexander (Sasha Levin)]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 86d54795c94532075d862aa0a79f0c981dab4bdd ]

Otherwise we can get livelock like below.

[79880.428136] dbench          D    0 18405  18404 0x00000000
[79880.428139] Call Trace:
[79880.428142]  __schedule+0x219/0x6b0
[79880.428144]  schedule+0x36/0x80
[79880.428147]  schedule_timeout+0x243/0x2e0
[79880.428152]  ? update_sd_lb_stats+0x16b/0x5f0
[79880.428155]  ? ktime_get+0x3c/0xb0
[79880.428157]  io_schedule_timeout+0xa6/0x110
[79880.428161]  __lock_page+0xf7/0x130
[79880.428164]  ? unlock_page+0x30/0x30
[79880.428167]  pagecache_get_page+0x16b/0x250
[79880.428171]  grab_cache_page_write_begin+0x20/0x40
[79880.428182]  f2fs_write_begin+0xa2/0xdb0 [f2fs]
[79880.428192]  ? f2fs_mark_inode_dirty_sync+0x16/0x30 [f2fs]
[79880.428197]  ? kmem_cache_free+0x79/0x200
[79880.428203]  ? __mark_inode_dirty+0x17f/0x360
[79880.428206]  generic_perform_write+0xbb/0x190
[79880.428213]  ? file_update_time+0xa4/0xf0
[79880.428217]  __generic_file_write_iter+0x19b/0x1e0
[79880.428226]  f2fs_file_write_iter+0x9c/0x180 [f2fs]
[79880.428231]  __vfs_write+0xc5/0x140
[79880.428235]  vfs_write+0xb2/0x1b0
[79880.428238]  SyS_write+0x46/0xa0
[79880.428242]  entry_SYSCALL_64_fastpath+0x1e/0xad

Fixes: cae96a5c8ab6 ("f2fs: check io submission more precisely")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/f2fs/data.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 972eab7ac071..98b2fc2678ff 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1416,7 +1416,12 @@ static int f2fs_write_begin(struct file *file, struct address_space *mapping,
 			goto fail;
 	}
 repeat:
-	page = grab_cache_page_write_begin(mapping, index, flags);
+	/*
+	 * Do not use grab_cache_page_write_begin() to avoid deadlock due to
+	 * wait_for_stable_page. Will wait that below with our IO control.
+	 */
+	page = pagecache_get_page(mapping, index,
+				FGP_LOCK | FGP_WRITE | FGP_CREAT, GFP_NOFS);
 	if (!page) {
 		err = -ENOMEM;
 		goto fail;
-- 
2.11.0

[GIT PULL for-4.4 11/25] md/linear: shutup lockdep warnning

[Levin, Alexander (Sasha Levin)]

From: Shaohua Li <shli@fb.com>

[ Upstream commit d939cdfde34f50b95254b375f498447c82190b3e ]

Commit 03a9e24(md linear: fix a race between linear_add() and
linear_congested()) introduces the warnning.

Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/md/linear.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 6ba3227e29b2..7ffb20ec1a46 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -223,7 +223,8 @@ static int linear_add(struct mddev *mddev, struct md_rdev *rdev)
 	 * oldconf until no one uses it anymore.
 	 */
 	mddev_suspend(mddev);
-	oldconf = rcu_dereference(mddev->private);
+	oldconf = rcu_dereference_protected(mddev->private,
+			lockdep_is_held(&mddev->reconfig_mutex));
 	mddev->raid_disks++;
 	WARN_ONCE(mddev->raid_disks != newconf->raid_disks,
 		"copied raid_disks doesn't match mddev->raid_disks");
-- 
2.11.0

[GIT PULL for-4.4 13/25] net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs

[Levin, Alexander (Sasha Levin)]

From: Majd Dibbiny <majd@mellanox.com>

[ Upstream commit 95f1ba9a24af9769f6e20dfe9a77c863f253f311 ]

In the VF driver, module parameter mlx4_log_num_mgm_entry_size was
mistakenly overwritten -- and in a manner which overrode the
device-managed flow steering option encoded in the parameter.

log_num_mgm_entry_size is a global module parameter which
affects all ConnectX-3 PFs installed on that host.
If a VF changes log_num_mgm_entry_size, this will affect all PFs
which are probed subsequent to the change (by disabling DMFS for
those PFs).

Fixes: 3c439b5586e9 ("mlx4_core: Allow choosing flow steering mode")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/mellanox/mlx4/main.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 31c491e02e69..99361352ed0d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -791,8 +791,6 @@ static int mlx4_slave_cap(struct mlx4_dev *dev)
 		return -ENOSYS;
 	}
 
-	mlx4_log_num_mgm_entry_size = hca_param.log_mc_entry_sz;
-
 	dev->caps.hca_core_clock = hca_param.hca_core_clock;
 
 	memset(&dev_cap, 0, sizeof(dev_cap));
-- 
2.11.0

[GIT PULL for-4.4 14/25] crypto: xts - Add ECB dependency

[Levin, Alexander (Sasha Levin)]

From: Milan Broz <gmazyland@gmail.com>

[ Upstream commit 12cb3a1c4184f891d965d1f39f8cfcc9ef617647 ]

Since the
   commit f1c131b45410a202eb45cc55980a7a9e4e4b4f40
   crypto: xts - Convert to skcipher
the XTS mode is based on ECB, so the mode must select
ECB otherwise it can fail to initialize.

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 crypto/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/crypto/Kconfig b/crypto/Kconfig
index 7240821137fd..617bf4a7da56 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -343,6 +343,7 @@ config CRYPTO_XTS
 	select CRYPTO_BLKCIPHER
 	select CRYPTO_MANAGER
 	select CRYPTO_GF128MUL
+	select CRYPTO_ECB
 	help
 	  XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain,
 	  key size 256, 384 or 512 bits. This implementation currently
-- 
2.11.0

[GIT PULL for-4.4 12/25] sparc64: Migrate hvcons irq to panicked cpu

[Levin, Alexander (Sasha Levin)]

From: Vijay Kumar <vijay.ac.kumar@oracle.com>

[ Upstream commit 7dd4fcf5b70694dc961eb6b954673e4fc9730dbd ]

On panic, all other CPUs are stopped except the one which had
hit panic. To keep console alive, we need to migrate hvcons irq
to panicked CPU.

Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/sparc/include/asm/setup.h | 5 ++++-
 arch/sparc/kernel/smp_64.c     | 6 +++++-
 drivers/tty/serial/sunhv.c     | 6 ++++++
 3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/include/asm/setup.h b/arch/sparc/include/asm/setup.h
index be0cc1beed41..3fae200dd251 100644
--- a/arch/sparc/include/asm/setup.h
+++ b/arch/sparc/include/asm/setup.h
@@ -59,8 +59,11 @@ extern atomic_t dcpage_flushes;
 extern atomic_t dcpage_flushes_xcall;
 
 extern int sysctl_tsb_ratio;
-#endif
 
+#ifdef CONFIG_SERIAL_SUNHV
+void sunhv_migrate_hvcons_irq(int cpu);
+#endif
+#endif
 void sun_do_break(void);
 extern int stop_a_enabled;
 extern int scons_pwroff;
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 4511caa3b7e9..46866b2097e8 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1443,8 +1443,12 @@ void smp_send_stop(void)
 	int cpu;
 
 	if (tlb_type == hypervisor) {
+		int this_cpu = smp_processor_id();
+#ifdef CONFIG_SERIAL_SUNHV
+		sunhv_migrate_hvcons_irq(this_cpu);
+#endif
 		for_each_online_cpu(cpu) {
-			if (cpu == smp_processor_id())
+			if (cpu == this_cpu)
 				continue;
 #ifdef CONFIG_SUN_LDOMS
 			if (ldom_domaining_enabled) {
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 4e603d060e80..59828d819145 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -398,6 +398,12 @@ static struct uart_driver sunhv_reg = {
 
 static struct uart_port *sunhv_port;
 
+void sunhv_migrate_hvcons_irq(int cpu)
+{
+	/* Migrate hvcons irq to param cpu */
+	irq_force_affinity(sunhv_port->irq, cpumask_of(cpu));
+}
+
 /* Copy 's' into the con_write_page, decoding "\n" into
  * "\r\n" along the way.  We have to return two lengths
  * because the caller needs to know how much to advance
-- 
2.11.0

[GIT PULL for-4.4 15/25] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock

[Levin, Alexander (Sasha Levin)]

From: Eric Ren <zren@suse.com>

[ Upstream commit 439a36b8ef38657f765b80b775e2885338d72451 ]

We are in the situation that we have to avoid recursive cluster locking,
but there is no way to check if a cluster lock has been taken by a precess
already.

Mostly, we can avoid recursive locking by writing code carefully.
However, we found that it's very hard to handle the routines that are
invoked directly by vfs code.  For instance:

  const struct inode_operations ocfs2_file_iops = {
      .permission     = ocfs2_permission,
      .get_acl        = ocfs2_iop_get_acl,
      .set_acl        = ocfs2_iop_set_acl,
  };

Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):

  do_sys_open
   may_open
    inode_permission
     ocfs2_permission
      ocfs2_inode_lock() <=== first time
       generic_permission
        get_acl
         ocfs2_iop_get_acl
  	ocfs2_inode_lock() <=== recursive one

A deadlock will occur if a remote EX request comes in between two of
ocfs2_inode_lock().  Briefly describe how the deadlock is formed:

On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of
the remote EX lock request.  Another hand, the recursive cluster lock
(the second one) will be blocked in in __ocfs2_cluster_lock() because of
OCFS2_LOCK_BLOCKED.  But, the downconvert never complete, why? because
there is no chance for the first cluster lock on this node to be
unlocked - we block ourselves in the code path.

The idea to fix this issue is mostly taken from gfs2 code.

1. introduce a new field: struct ocfs2_lock_res.l_holders, to keep track
   of the processes' pid who has taken the cluster lock of this lock
   resource;

2. introduce a new flag for ocfs2_inode_lock_full:
   OCFS2_META_LOCK_GETBH; it means just getting back disk inode bh for
   us if we've got cluster lock.

3. export a helper: ocfs2_is_locked_by_me() is used to check if we have
   got the cluster lock in the upper code path.

The tracking logic should be used by some of the ocfs2 vfs's callbacks,
to solve the recursive locking issue cuased by the fact that vfs
routines can call into each other.

The performance penalty of processing the holder list should only be
seen at a few cases where the tracking logic is used, such as get/set
acl.

You may ask what if the first time we got a PR lock, and the second time
we want a EX lock? fortunately, this case never happens in the real
world, as far as I can see, including permission check,
(get|set)_(acl|attr), and the gfs2 code also do so.

[sfr@canb.auug.org.au remove some inlines]
Link: http://lkml.kernel.org/r/20170117100948.11657-2-zren@suse.com
Signed-off-by: Eric Ren <zren@suse.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/ocfs2/dlmglue.c | 105 +++++++++++++++++++++++++++++++++++++++++++++++++++--
 fs/ocfs2/dlmglue.h |  18 +++++++++
 fs/ocfs2/ocfs2.h   |   1 +
 3 files changed, 121 insertions(+), 3 deletions(-)

diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 60a5f1548cd9..555b57a16499 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -531,6 +531,7 @@ void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res)
 	init_waitqueue_head(&res->l_event);
 	INIT_LIST_HEAD(&res->l_blocked_list);
 	INIT_LIST_HEAD(&res->l_mask_waiters);
+	INIT_LIST_HEAD(&res->l_holders);
 }
 
 void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res,
@@ -748,6 +749,50 @@ void ocfs2_lock_res_free(struct ocfs2_lock_res *res)
 	res->l_flags = 0UL;
 }
 
+/*
+ * Keep a list of processes who have interest in a lockres.
+ * Note: this is now only uesed for check recursive cluster locking.
+ */
+static inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
+				   struct ocfs2_lock_holder *oh)
+{
+	INIT_LIST_HEAD(&oh->oh_list);
+	oh->oh_owner_pid = get_pid(task_pid(current));
+
+	spin_lock(&lockres->l_lock);
+	list_add_tail(&oh->oh_list, &lockres->l_holders);
+	spin_unlock(&lockres->l_lock);
+}
+
+static inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
+				       struct ocfs2_lock_holder *oh)
+{
+	spin_lock(&lockres->l_lock);
+	list_del(&oh->oh_list);
+	spin_unlock(&lockres->l_lock);
+
+	put_pid(oh->oh_owner_pid);
+}
+
+static inline int ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres)
+{
+	struct ocfs2_lock_holder *oh;
+	struct pid *pid;
+
+	/* look in the list of holders for one with the current task as owner */
+	spin_lock(&lockres->l_lock);
+	pid = task_pid(current);
+	list_for_each_entry(oh, &lockres->l_holders, oh_list) {
+		if (oh->oh_owner_pid == pid) {
+			spin_unlock(&lockres->l_lock);
+			return 1;
+		}
+	}
+	spin_unlock(&lockres->l_lock);
+
+	return 0;
+}
+
 static inline void ocfs2_inc_holders(struct ocfs2_lock_res *lockres,
 				     int level)
 {
@@ -2343,8 +2388,9 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
 		goto getbh;
 	}
 
-	if (ocfs2_mount_local(osb))
-		goto local;
+	if ((arg_flags & OCFS2_META_LOCK_GETBH) ||
+	    ocfs2_mount_local(osb))
+		goto update;
 
 	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
 		ocfs2_wait_for_recovery(osb);
@@ -2373,7 +2419,7 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
 	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
 		ocfs2_wait_for_recovery(osb);
 
-local:
+update:
 	/*
 	 * We only see this flag if we're being called from
 	 * ocfs2_read_locked_inode(). It means we're locking an inode
@@ -2515,6 +2561,59 @@ void ocfs2_inode_unlock(struct inode *inode,
 		ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level);
 }
 
+/*
+ * This _tracker variantes are introduced to deal with the recursive cluster
+ * locking issue. The idea is to keep track of a lock holder on the stack of
+ * the current process. If there's a lock holder on the stack, we know the
+ * task context is already protected by cluster locking. Currently, they're
+ * used in some VFS entry routines.
+ *
+ * return < 0 on error, return == 0 if there's no lock holder on the stack
+ * before this call, return == 1 if this call would be a recursive locking.
+ */
+int ocfs2_inode_lock_tracker(struct inode *inode,
+			     struct buffer_head **ret_bh,
+			     int ex,
+			     struct ocfs2_lock_holder *oh)
+{
+	int status;
+	int arg_flags = 0, has_locked;
+	struct ocfs2_lock_res *lockres;
+
+	lockres = &OCFS2_I(inode)->ip_inode_lockres;
+	has_locked = ocfs2_is_locked_by_me(lockres);
+	/* Just get buffer head if the cluster lock has been taken */
+	if (has_locked)
+		arg_flags = OCFS2_META_LOCK_GETBH;
+
+	if (likely(!has_locked || ret_bh)) {
+		status = ocfs2_inode_lock_full(inode, ret_bh, ex, arg_flags);
+		if (status < 0) {
+			if (status != -ENOENT)
+				mlog_errno(status);
+			return status;
+		}
+	}
+	if (!has_locked)
+		ocfs2_add_holder(lockres, oh);
+
+	return has_locked;
+}
+
+void ocfs2_inode_unlock_tracker(struct inode *inode,
+				int ex,
+				struct ocfs2_lock_holder *oh,
+				int had_lock)
+{
+	struct ocfs2_lock_res *lockres;
+
+	lockres = &OCFS2_I(inode)->ip_inode_lockres;
+	if (!had_lock) {
+		ocfs2_remove_holder(lockres, oh);
+		ocfs2_inode_unlock(inode, ex);
+	}
+}
+
 int ocfs2_orphan_scan_lock(struct ocfs2_super *osb, u32 *seqno)
 {
 	struct ocfs2_lock_res *lockres;
diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
index d293a22c32c5..a7fc18ba0dc1 100644
--- a/fs/ocfs2/dlmglue.h
+++ b/fs/ocfs2/dlmglue.h
@@ -70,6 +70,11 @@ struct ocfs2_orphan_scan_lvb {
 	__be32	lvb_os_seqno;
 };
 
+struct ocfs2_lock_holder {
+	struct list_head oh_list;
+	struct pid *oh_owner_pid;
+};
+
 /* ocfs2_inode_lock_full() 'arg_flags' flags */
 /* don't wait on recovery. */
 #define OCFS2_META_LOCK_RECOVERY	(0x01)
@@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
 #define OCFS2_META_LOCK_NOQUEUE		(0x02)
 /* don't block waiting for the downconvert thread, instead return -EAGAIN */
 #define OCFS2_LOCK_NONBLOCK		(0x04)
+/* just get back disk inode bh if we've got cluster lock. */
+#define OCFS2_META_LOCK_GETBH		(0x08)
 
 /* Locking subclasses of inode cluster lock */
 enum {
@@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug *dlm_debug);
 
 /* To set the locking protocol on module initialization */
 void ocfs2_set_locking_protocol(void);
+
+/* The _tracker pair is used to avoid cluster recursive locking */
+int ocfs2_inode_lock_tracker(struct inode *inode,
+			     struct buffer_head **ret_bh,
+			     int ex,
+			     struct ocfs2_lock_holder *oh);
+void ocfs2_inode_unlock_tracker(struct inode *inode,
+				int ex,
+				struct ocfs2_lock_holder *oh,
+				int had_lock);
+
 #endif	/* DLMGLUE_H */
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 7a0126267847..2495066a9ca3 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -172,6 +172,7 @@ struct ocfs2_lock_res {
 
 	struct list_head         l_blocked_list;
 	struct list_head         l_mask_waiters;
+	struct list_head	 l_holders;
 
 	unsigned long		 l_flags;
 	char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
-- 
2.11.0

[GIT PULL for-4.4 17/25] scsi: scsi_dh_emc: return success in clariion_std_inquiry()

[Levin, Alexander (Sasha Levin)]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 4d7d39a18b8b81511f0b893b7d2203790bf8a58b ]

We accidentally return an uninitialized variable on success.

Fixes: b6ff1b14cdf4 ("[SCSI] scsi_dh: Update EMC handler")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/device_handler/scsi_dh_emc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index e6fb97cb12f4..7c28dc1cb0dd 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -456,7 +456,7 @@ static int clariion_prep_fn(struct scsi_device *sdev, struct request *req)
 static int clariion_std_inquiry(struct scsi_device *sdev,
 				struct clariion_dh_data *csdev)
 {
-	int err;
+	int err = SCSI_DH_OK;
 	char *sp_model;
 
 	err = send_inquiry_cmd(sdev, 0, csdev);
-- 
2.11.0

[GIT PULL for-4.4 16/25] slub: do not merge cache if slub_debug contains a never-merge flag

[Levin, Alexander (Sasha Levin)]

From: Grygorii Maistrenko <grygoriimkd@gmail.com>

[ Upstream commit c6e28895a4372992961888ffaadc9efc643b5bfe ]

In case CONFIG_SLUB_DEBUG_ON=n, find_mergeable() gets debug features from
commandline but never checks if there are features from the
SLAB_NEVER_MERGE set.

As a result selected by slub_debug caches are always mergeable if they
have been created without a custom constructor set or without one of the
SLAB_* debug features on.

This moves the SLAB_NEVER_MERGE check below the flags update from
commandline to make sure it won't merge the slab cache if one of the debug
features is on.

Link: http://lkml.kernel.org/r/20170101124451.GA4740@lp-laptop-d
Signed-off-by: Grygorii Maistrenko <grygoriimkd@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 mm/slab_common.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/mm/slab_common.c b/mm/slab_common.c
index bec2fce9fafc..01e7246de8df 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -250,7 +250,7 @@ struct kmem_cache *find_mergeable(size_t size, size_t align,
 {
 	struct kmem_cache *s;
 
-	if (slab_nomerge || (flags & SLAB_NEVER_MERGE))
+	if (slab_nomerge)
 		return NULL;
 
 	if (ctor)
@@ -261,6 +261,9 @@ struct kmem_cache *find_mergeable(size_t size, size_t align,
 	size = ALIGN(size, align);
 	flags = kmem_cache_flags(size, flags, name, NULL);
 
+	if (flags & SLAB_NEVER_MERGE)
+		return NULL;
+
 	list_for_each_entry_reverse(s, &slab_caches, list) {
 		if (slab_unmergeable(s))
 			continue;
-- 
2.11.0

[GIT PULL for-4.4 18/25] net: mvpp2: release reference to txq_cpu[] entry after unmapping

[Levin, Alexander (Sasha Levin)]

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

[ Upstream commit 36fb7435b6ac4d288a2d4deea8934f9456ab46b6 ]

The mvpp2_txq_bufs_free() function is called upon TX completion to DMA
unmap TX buffers, and free the corresponding SKBs. It gets the
references to the SKB to free and the DMA buffer to unmap from a per-CPU
txq_pcpu data structure.

However, the code currently increments the pointer to the next entry
before doing the DMA unmap and freeing the SKB. It does not cause any
visible problem because for a given SKB the TX completion is guaranteed
to take place on the CPU where the TX was started. However, it is much
more logical to increment the pointer to the next entry once the current
entry has been completely unmapped/released.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/marvell/mvpp2.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index 0e67145bc418..4f34e1b79705 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -4415,13 +4415,12 @@ static void mvpp2_txq_bufs_free(struct mvpp2_port *port,
 		struct mvpp2_txq_pcpu_buf *tx_buf =
 			txq_pcpu->buffs + txq_pcpu->txq_get_index;
 
-		mvpp2_txq_inc_get(txq_pcpu);
-
 		dma_unmap_single(port->dev->dev.parent, tx_buf->phys,
 				 tx_buf->size, DMA_TO_DEVICE);
-		if (!tx_buf->skb)
-			continue;
-		dev_kfree_skb_any(tx_buf->skb);
+		if (tx_buf->skb)
+			dev_kfree_skb_any(tx_buf->skb);
+
+		mvpp2_txq_inc_get(txq_pcpu);
 	}
 }
 
-- 
2.11.0

[GIT PULL for-4.4 19/25] i2c: at91: ensure state is restored after suspending

[Levin, Alexander (Sasha Levin)]

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

[ Upstream commit e3ccc921b7d8fd1fcd10a00720e09823d8078666 ]

When going to suspend, the I2C registers may be lost because the power to
VDDcore is cut. Restore them when resuming.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/i2c/busses/i2c-at91.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 10835d1f559b..dee0fc421054 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -1131,6 +1131,7 @@ static int at91_twi_suspend_noirq(struct device *dev)
 
 static int at91_twi_resume_noirq(struct device *dev)
 {
+	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
 	int ret;
 
 	if (!pm_runtime_status_suspended(dev)) {
@@ -1142,6 +1143,8 @@ static int at91_twi_resume_noirq(struct device *dev)
 	pm_runtime_mark_last_busy(dev);
 	pm_request_autosuspend(dev);
 
+	at91_init_twi_bus(twi_dev);
+
 	return 0;
 }
 
-- 
2.11.0

[GIT PULL for-4.4 22/25] uapi: fix linux/mroute6.h userspace compilation errors

[Levin, Alexander (Sasha Levin)]

From: "Dmitry V. Levin" <ldv@altlinux.org>

[ Upstream commit 72aa107df6a275cf03359934ca5799a2be7a1bf7 ]

Include <linux/in6.h> to fix the following linux/mroute6.h userspace
compilation errors:

/usr/include/linux/mroute6.h:80:22: error: field 'mf6cc_origin' has incomplete type
  struct sockaddr_in6 mf6cc_origin;  /* Origin of mcast */
/usr/include/linux/mroute6.h:81:22: error: field 'mf6cc_mcastgrp' has incomplete type
  struct sockaddr_in6 mf6cc_mcastgrp;  /* Group in question */
/usr/include/linux/mroute6.h:91:22: error: field 'src' has incomplete type
  struct sockaddr_in6 src;
/usr/include/linux/mroute6.h:92:22: error: field 'grp' has incomplete type
  struct sockaddr_in6 grp;
/usr/include/linux/mroute6.h:132:18: error: field 'im6_src' has incomplete type
  struct in6_addr im6_src, im6_dst;
/usr/include/linux/mroute6.h:132:27: error: field 'im6_dst' has incomplete type
  struct in6_addr im6_src, im6_dst;

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 include/uapi/linux/mroute6.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h
index ce91215cf7e6..e0b566dc72ef 100644
--- a/include/uapi/linux/mroute6.h
+++ b/include/uapi/linux/mroute6.h
@@ -3,6 +3,7 @@
 
 #include <linux/types.h>
 #include <linux/sockios.h>
+#include <linux/in6.h>		/* For struct sockaddr_in6. */
 
 /*
  *	Based on the MROUTING 3.5 defines primarily to keep
-- 
2.11.0

[GIT PULL for-4.4 21/25] uapi: fix linux/rds.h userspace compilation errors

[Levin, Alexander (Sasha Levin)]

From: "Dmitry V. Levin" <ldv@altlinux.org>

[ Upstream commit feb0869d90e51ce8b6fd8a46588465b1b5a26d09 ]

Consistently use types from linux/types.h to fix the following
linux/rds.h userspace compilation errors:

/usr/include/linux/rds.h:106:2: error: unknown type name 'uint8_t'
  uint8_t name[32];
/usr/include/linux/rds.h:107:2: error: unknown type name 'uint64_t'
  uint64_t value;
/usr/include/linux/rds.h:117:2: error: unknown type name 'uint64_t'
  uint64_t next_tx_seq;
/usr/include/linux/rds.h:118:2: error: unknown type name 'uint64_t'
  uint64_t next_rx_seq;
/usr/include/linux/rds.h:121:2: error: unknown type name 'uint8_t'
  uint8_t transport[TRANSNAMSIZ];  /* null term ascii */
/usr/include/linux/rds.h:122:2: error: unknown type name 'uint8_t'
  uint8_t flags;
/usr/include/linux/rds.h:129:2: error: unknown type name 'uint64_t'
  uint64_t seq;
/usr/include/linux/rds.h:130:2: error: unknown type name 'uint32_t'
  uint32_t len;
/usr/include/linux/rds.h:135:2: error: unknown type name 'uint8_t'
  uint8_t flags;
/usr/include/linux/rds.h:139:2: error: unknown type name 'uint32_t'
  uint32_t sndbuf;
/usr/include/linux/rds.h:144:2: error: unknown type name 'uint32_t'
  uint32_t rcvbuf;
/usr/include/linux/rds.h:145:2: error: unknown type name 'uint64_t'
  uint64_t inum;
/usr/include/linux/rds.h:153:2: error: unknown type name 'uint64_t'
  uint64_t       hdr_rem;
/usr/include/linux/rds.h:154:2: error: unknown type name 'uint64_t'
  uint64_t       data_rem;
/usr/include/linux/rds.h:155:2: error: unknown type name 'uint32_t'
  uint32_t       last_sent_nxt;
/usr/include/linux/rds.h:156:2: error: unknown type name 'uint32_t'
  uint32_t       last_expected_una;
/usr/include/linux/rds.h:157:2: error: unknown type name 'uint32_t'
  uint32_t       last_seen_una;
/usr/include/linux/rds.h:164:2: error: unknown type name 'uint8_t'
  uint8_t  src_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:165:2: error: unknown type name 'uint8_t'
  uint8_t  dst_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:167:2: error: unknown type name 'uint32_t'
  uint32_t max_send_wr;
/usr/include/linux/rds.h:168:2: error: unknown type name 'uint32_t'
  uint32_t max_recv_wr;
/usr/include/linux/rds.h:169:2: error: unknown type name 'uint32_t'
  uint32_t max_send_sge;
/usr/include/linux/rds.h:170:2: error: unknown type name 'uint32_t'
  uint32_t rdma_mr_max;
/usr/include/linux/rds.h:171:2: error: unknown type name 'uint32_t'
  uint32_t rdma_mr_size;
/usr/include/linux/rds.h:212:9: error: unknown type name 'uint64_t'
 typedef uint64_t rds_rdma_cookie_t;
/usr/include/linux/rds.h:215:2: error: unknown type name 'uint64_t'
  uint64_t addr;
/usr/include/linux/rds.h:216:2: error: unknown type name 'uint64_t'
  uint64_t bytes;
/usr/include/linux/rds.h:221:2: error: unknown type name 'uint64_t'
  uint64_t cookie_addr;
/usr/include/linux/rds.h:222:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:228:2: error: unknown type name 'uint64_t'
  uint64_t  cookie_addr;
/usr/include/linux/rds.h:229:2: error: unknown type name 'uint64_t'
  uint64_t  flags;
/usr/include/linux/rds.h:234:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:240:2: error: unknown type name 'uint64_t'
  uint64_t local_vec_addr;
/usr/include/linux/rds.h:241:2: error: unknown type name 'uint64_t'
  uint64_t nr_local;
/usr/include/linux/rds.h:242:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:243:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:248:2: error: unknown type name 'uint64_t'
  uint64_t  local_addr;
/usr/include/linux/rds.h:249:2: error: unknown type name 'uint64_t'
  uint64_t  remote_addr;
/usr/include/linux/rds.h:252:4: error: unknown type name 'uint64_t'
    uint64_t compare;
/usr/include/linux/rds.h:253:4: error: unknown type name 'uint64_t'
    uint64_t swap;
/usr/include/linux/rds.h:256:4: error: unknown type name 'uint64_t'
    uint64_t add;
/usr/include/linux/rds.h:259:4: error: unknown type name 'uint64_t'
    uint64_t compare;
/usr/include/linux/rds.h:260:4: error: unknown type name 'uint64_t'
    uint64_t swap;
/usr/include/linux/rds.h:261:4: error: unknown type name 'uint64_t'
    uint64_t compare_mask;
/usr/include/linux/rds.h:262:4: error: unknown type name 'uint64_t'
    uint64_t swap_mask;
/usr/include/linux/rds.h:265:4: error: unknown type name 'uint64_t'
    uint64_t add;
/usr/include/linux/rds.h:266:4: error: unknown type name 'uint64_t'
    uint64_t nocarry_mask;
/usr/include/linux/rds.h:269:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:270:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:274:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:275:2: error: unknown type name 'int32_t'
  int32_t  status;

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 include/uapi/linux/rds.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/uapi/linux/rds.h b/include/uapi/linux/rds.h
index 0f9265cb2a96..7af20a136429 100644
--- a/include/uapi/linux/rds.h
+++ b/include/uapi/linux/rds.h
@@ -35,6 +35,7 @@
 #define _LINUX_RDS_H
 
 #include <linux/types.h>
+#include <linux/socket.h>		/* For __kernel_sockaddr_storage. */
 
 #define RDS_IB_ABI_VERSION		0x301
 
@@ -223,7 +224,7 @@ struct rds_get_mr_args {
 };
 
 struct rds_get_mr_for_dest_args {
-	struct sockaddr_storage	dest_addr;
+	struct __kernel_sockaddr_storage dest_addr;
 	struct rds_iovec 	vec;
 	uint64_t		cookie_addr;
 	uint64_t		flags;
-- 
2.11.0

[GIT PULL for-4.4 20/25] ceph: clean up unsafe d_parent accesses in build_dentry_path

[Levin, Alexander (Sasha Levin)]

From: Jeff Layton <jlayton@redhat.com>

[ Upstream commit c6b0b656ca24ede6657abb4a2cd910fa9c1879ba ]

While we hold a reference to the dentry when build_dentry_path is
called, we could end up racing with a rename that changes d_parent.
Handle that situation correctly, by using the rcu_read_lock to
ensure that the parent dentry and inode stick around long enough
to safely check ceph_snap and ceph_ino.

Link: http://tracker.ceph.com/issues/18148
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/ceph/mds_client.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index f54f77037d22..ead89489ae71 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -1845,13 +1845,18 @@ static int build_dentry_path(struct dentry *dentry,
 			     int *pfreepath)
 {
 	char *path;
+	struct inode *dir;
 
-	if (ceph_snap(d_inode(dentry->d_parent)) == CEPH_NOSNAP) {
-		*pino = ceph_ino(d_inode(dentry->d_parent));
+	rcu_read_lock();
+	dir = d_inode_rcu(dentry->d_parent);
+	if (dir && ceph_snap(dir) == CEPH_NOSNAP) {
+		*pino = ceph_ino(dir);
+		rcu_read_unlock();
 		*ppath = dentry->d_name.name;
 		*ppathlen = dentry->d_name.len;
 		return 0;
 	}
+	rcu_read_unlock();
 	path = ceph_mdsc_build_path(dentry, ppathlen, pino, 1);
 	if (IS_ERR(path))
 		return PTR_ERR(path);
-- 
2.11.0

[GIT PULL for-4.4 25/25] cpufreq: CPPC: add ACPI_PROCESSOR dependency

[Levin, Alexander (Sasha Levin)]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit a578884fa0d2768f13d37c6591a9e1ed600482d3 ]

Without the Kconfig dependency, we can get this warning:

warning: ACPI_CPPC_CPUFREQ selects ACPI_CPPC_LIB which has unmet direct dependencies (ACPI && ACPI_PROCESSOR)

Fixes: 5477fb3bd1e8 (ACPI / CPPC: Add a CPUFreq driver for use with CPPC)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/cpufreq/Kconfig.arm | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index b1f8a73e5a94..eed1e073d96d 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -241,7 +241,7 @@ config ARM_PXA2xx_CPUFREQ
 
 config ACPI_CPPC_CPUFREQ
 	tristate "CPUFreq driver based on the ACPI CPPC spec"
-	depends on ACPI
+	depends on ACPI_PROCESSOR
 	select ACPI_CPPC_LIB
 	default n
 	help
-- 
2.11.0

[GIT PULL for-4.4 24/25] nfsd/callback: Cleanup callback cred on shutdown

[Levin, Alexander (Sasha Levin)]

From: Kinglong Mee <kinglongmee@gmail.com>

[ Upstream commit f7d1ddbe7648af7460d23688c8c131342eb43b3a ]

The rpccred gotten from rpc_lookup_machine_cred() should be put when
state is shutdown.

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/nfsd/nfs4callback.c |  8 ++++++++
 fs/nfsd/nfs4state.c    | 10 ++++++----
 fs/nfsd/state.h        |  1 +
 3 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 15bdc2d48cfe..24ace275160c 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -696,6 +696,14 @@ int set_callback_cred(void)
 	return 0;
 }
 
+void cleanup_callback_cred(void)
+{
+	if (callback_cred) {
+		put_rpccred(callback_cred);
+		callback_cred = NULL;
+	}
+}
+
 static struct rpc_cred *get_backchannel_cred(struct nfs4_client *clp, struct rpc_clnt *client, struct nfsd4_session *ses)
 {
 	if (clp->cl_minorversion == 0) {
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 9e5a6842346e..ca9ebc3242d3 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -6792,23 +6792,24 @@ nfs4_state_start(void)
 
 	ret = set_callback_cred();
 	if (ret)
-		return -ENOMEM;
+		return ret;
+
 	laundry_wq = alloc_workqueue("%s", WQ_UNBOUND, 0, "nfsd4");
 	if (laundry_wq == NULL) {
 		ret = -ENOMEM;
-		goto out_recovery;
+		goto out_cleanup_cred;
 	}
 	ret = nfsd4_create_callback_queue();
 	if (ret)
 		goto out_free_laundry;
 
 	set_max_delegations();
-
 	return 0;
 
 out_free_laundry:
 	destroy_workqueue(laundry_wq);
-out_recovery:
+out_cleanup_cred:
+	cleanup_callback_cred();
 	return ret;
 }
 
@@ -6847,6 +6848,7 @@ nfs4_state_shutdown(void)
 {
 	destroy_workqueue(laundry_wq);
 	nfsd4_destroy_callback_queue();
+	cleanup_callback_cred();
 }
 
 static void
diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h
index 5134eedcb16c..86af697c21d3 100644
--- a/fs/nfsd/state.h
+++ b/fs/nfsd/state.h
@@ -595,6 +595,7 @@ extern struct nfs4_client_reclaim *nfsd4_find_reclaim_client(const char *recdir,
 extern __be32 nfs4_check_open_reclaim(clientid_t *clid,
 		struct nfsd4_compound_state *cstate, struct nfsd_net *nn);
 extern int set_callback_cred(void);
+extern void cleanup_callback_cred(void);
 extern void nfsd4_probe_callback(struct nfs4_client *clp);
 extern void nfsd4_probe_callback_sync(struct nfs4_client *clp);
 extern void nfsd4_change_callback(struct nfs4_client *clp, struct nfs4_cb_conn *);
-- 
2.11.0

[GIT PULL for-4.4 23/25] target/iscsi: Fix unsolicited data seq_end_offset calculation

[Levin, Alexander (Sasha Levin)]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit 4d65491c269729a1e3b375c45e73213f49103d33 ]

In case of unsolicited data for the first sequence
seq_end_offset must be set to minimum of total data length
and FirstBurstLength, so do not add cmd->write_data_done
to the min of total data length and FirstBurstLength.

This patch avoids that with ImmediateData=Yes, InitialR2T=No,
MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command
with IO size above FirstBurstLength triggers sequence error
messages, for example

Set following parameters on target (linux-4.8.12)
ImmediateData = Yes
InitialR2T = No
MaxXmitDataSegmentLength = 8k
FirstBurstLength = 64k

Log in from Open iSCSI initiator and execute
dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct

Error messages on target
Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside
of Sequence 73728:131072 while DataSequenceInOrder=Yes.
Command ITT: 0x00000035, received DataSN: 0x00000001 higher than
expected 0x00000000.
Unable to perform within-command recovery while ERL=0.

Signed-off-by: Varun Prakash <varun@chelsio.com>
[ bvanassche: Use min() instead of open-coding it / edited patch description ]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/target/iscsi/iscsi_target_erl0.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c
index 6c88fb021444..4eeb82cf79e4 100644
--- a/drivers/target/iscsi/iscsi_target_erl0.c
+++ b/drivers/target/iscsi/iscsi_target_erl0.c
@@ -44,10 +44,8 @@ void iscsit_set_dataout_sequence_values(
 	 */
 	if (cmd->unsolicited_data) {
 		cmd->seq_start_offset = cmd->write_data_done;
-		cmd->seq_end_offset = (cmd->write_data_done +
-			((cmd->se_cmd.data_length >
-			  conn->sess->sess_ops->FirstBurstLength) ?
-			 conn->sess->sess_ops->FirstBurstLength : cmd->se_cmd.data_length));
+		cmd->seq_end_offset = min(cmd->se_cmd.data_length,
+					conn->sess->sess_ops->FirstBurstLength);
 		return;
 	}
 
-- 
2.11.0

Re: [GIT PULL for-4.4 00/25] Commits for v4.4 LTS

[gregkh]

On Wed, Oct 11, 2017 at 12:45:38AM +0000, Levin, Alexander (Sasha Levin) wrote:
> Hi Greg,
> 
> The following commits were sent for review 7+ days ago, and comments were addressed.
> 
> Please pull for v4.4 LTS.

All now pulled in, thanks.

greg k-h