[PATCH] ARM: dts: imx28-tx28: fix interrupt flags

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
@ 2017-10-23 12:36 ` Lothar Waßmann
  0 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2017-10-23 12:36 UTC (permalink / raw)
  To: linux-arm-kernel

Some interrupts properties are given '0' as the flags argument.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 211e67d..52d99b4 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -329,7 +329,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -353,7 +353,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
@ 2017-10-23 12:36 ` Lothar Waßmann
  0 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2017-10-23 12:36 UTC (permalink / raw)
  To: Fabio Estevam, Mark Rutland, Rob Herring, Russell King,
	Sascha Hauer, Shawn Guo, devicetree, linux-arm-kernel,
	linux-kernel
  Cc: Lothar Waßmann

Some interrupts properties are given '0' as the flags argument.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 211e67d..52d99b4 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -329,7 +329,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -353,7 +353,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
  2017-10-23 12:36 ` Lothar Waßmann
@ 2017-10-24  6:24   ` Shawn Guo
  -1 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2017-10-24  6:24 UTC (permalink / raw)
  To: linux-arm-kernel

On Mon, Oct 23, 2017 at 02:36:26PM +0200, Lothar Wa?mann wrote:
> Some interrupts properties are given '0' as the flags argument.
> Change them to use the appropriate interrupt flags.
> 
> Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>

Applied, thanks.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
@ 2017-10-24  6:24   ` Shawn Guo
  0 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2017-10-24  6:24 UTC (permalink / raw)
  To: Lothar Waßmann
  Cc: Fabio Estevam, Mark Rutland, Rob Herring, Russell King,
	Sascha Hauer, devicetree, linux-arm-kernel, linux-kernel

On Mon, Oct 23, 2017 at 02:36:26PM +0200, Lothar Waßmann wrote:
> Some interrupts properties are given '0' as the flags argument.
> Change them to use the appropriate interrupt flags.
> 
> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>

Applied, thanks.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
@ 2017-10-23 12:35 ` Lothar Waßmann
  0 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2017-10-23 12:35 UTC (permalink / raw)
  To: linux-arm-kernel

Some interrupts properties are given '0' as the flags argument.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 211e67d..52d99b4 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -329,7 +329,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -353,7 +353,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
@ 2017-10-23 12:35 ` Lothar Waßmann
  0 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2017-10-23 12:35 UTC (permalink / raw)
  To: Fabio Estevam, Mark Rutland, Rob Herring, Russell King,
	Sascha Hauer, Shawn Guo, devicetree, linux-arm-kernel,
	linux-kernel
  Cc: Lothar Waßmann

Some interrupts properties are given '0' as the flags argument.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 211e67d..52d99b4 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -329,7 +329,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -353,7 +353,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
@ 2017-10-23 12:35 ` Lothar Waßmann
  0 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2017-10-23 12:35 UTC (permalink / raw)
  To: Fabio Estevam, Mark Rutland, Rob Herring, Russell King,
	Sascha Hauer, Shawn Guo, devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA
  Cc: Lothar Waßmann

Some interrupts properties are given '0' as the flags argument.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
---
 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 211e67d..52d99b4 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -329,7 +329,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -353,7 +353,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
@ 2017-10-23 12:33 ` Lothar Waßmann
  0 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2017-10-23 12:33 UTC (permalink / raw)
  To: linux-arm-kernel

Some interrupts properties are given '0' as the flags argument.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 211e67d..52d99b4 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -329,7 +329,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -353,7 +353,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
@ 2017-10-23 12:33 ` Lothar Waßmann
  0 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2017-10-23 12:33 UTC (permalink / raw)
  To: Fabio Estevam, Mark Rutland, Rob Herring, Russell King,
	Sascha Hauer, Shawn Guo, devicetree, linux-arm-kernel,
	linux-kernel
  Cc: Lothar Waßmann

Some interrupts properties are given '0' as the flags argument.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 211e67d..52d99b4 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -329,7 +329,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -353,7 +353,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH] ARM: dts: imx28-tx28: fix interrupt flags
@ 2017-10-23 12:33 ` Lothar Waßmann
  0 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2017-10-23 12:33 UTC (permalink / raw)
  To: Fabio Estevam, Mark Rutland, Rob Herring, Russell King,
	Sascha Hauer, Shawn Guo, devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA
  Cc: Lothar Waßmann

Some interrupts properties are given '0' as the flags argument.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
---
 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 211e67d..52d99b4 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -329,7 +329,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -353,7 +353,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2017-10-24  6:24 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-23 12:36 [PATCH] ARM: dts: imx28-tx28: fix interrupt flags Lothar Waßmann
2017-10-23 12:36 ` Lothar Waßmann
2017-10-24  6:24 ` Shawn Guo
2017-10-24  6:24   ` Shawn Guo
  -- strict thread matches above, loose matches on Subject: below --
2017-10-23 12:35 Lothar Waßmann
2017-10-23 12:35 ` Lothar Waßmann
2017-10-23 12:35 ` Lothar Waßmann
2017-10-23 12:33 Lothar Waßmann
2017-10-23 12:33 ` Lothar Waßmann
2017-10-23 12:33 ` Lothar Waßmann

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.