Re: [PATCH] HID: i2c-hid: add reset gpio property

[Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>]

+ devicetree list

Hi,

On Mon, Oct 30, 2017 at 10:49:49AM +0800, Lin Huang wrote:
> some i2c hid devices have reset gpio, need to control
> it in the driver.
> 
> Change-Id: I87bca954bffc7eb7b35711406f522cb3d0fc2ded

You should be removing these Gerrit ID lines from patches before sending
them to these mailing lists.

> Signed-off-by: Lin Huang <hl-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
>  drivers/hid/i2c-hid/i2c-hid.c         | 63 +++++++++++++++++++++++++++--------
>  include/linux/platform_data/i2c-hid.h |  4 +++
>  2 files changed, 53 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> index 9145c21..a0e3a8e 100644
> --- a/drivers/hid/i2c-hid/i2c-hid.c
> +++ b/drivers/hid/i2c-hid/i2c-hid.c
> @@ -38,6 +38,7 @@
>  #include <linux/mutex.h>
>  #include <linux/acpi.h>
>  #include <linux/of.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/regulator/consumer.h>
>  
>  #include <linux/platform_data/i2c-hid.h>
> @@ -793,6 +794,34 @@ struct hid_ll_driver i2c_hid_ll_driver = {
>  };
>  EXPORT_SYMBOL_GPL(i2c_hid_ll_driver);
>  
> +static int i2c_hid_hw_power_on(struct i2c_hid *ihid)
> +{
> +	int ret;
> +
> +	ret = regulator_enable(ihid->pdata.supply);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (ihid->pdata.post_power_delay_ms)
> +		msleep(ihid->pdata.post_power_delay_ms);
> +
> +	gpiod_set_value_cansleep(ihid->pdata.reset_gpio, 1);
> +	usleep_range(ihid->pdata.assert_reset_us,
> +		     ihid->pdata.assert_reset_us);

What's the point of using the same value on both ends of the range? Does
it make sense to give some padding to this? e.g., from X to X + 10% ?
(Note that reasonable values for this are on the order of a few
milliseconds.)

Also, the above msleep() has a 'if non-zero' condition on it...but
that's not actually necessary now that I look again, since msleep() and
usleep_range() both handle zero times OK... But it feels a little
inconsistent. We should probably change one or the other sometime.

> +	gpiod_set_value_cansleep(ihid->pdata.reset_gpio, 0);
> +	usleep_range(ihid->pdata.deassert_reset_us,
> +		     ihid->pdata.deassert_reset_us);
> +
> +	return ret;
> +}
> +
> +static int i2c_hid_hw_power_off(struct i2c_hid *ihid)
> +{
> +	gpiod_set_value_cansleep(ihid->pdata.reset_gpio, 1);
> +
> +	return regulator_disable(ihid->pdata.supply);
> +}
> +
>  static int i2c_hid_init_irq(struct i2c_client *client)
>  {
>  	struct i2c_hid *ihid = i2c_get_clientdata(client);
> @@ -934,6 +963,12 @@ static int i2c_hid_of_probe(struct i2c_client *client,
>  	if (!ret)
>  		pdata->post_power_delay_ms = val;
>  
> +	ret = of_property_read_u32(dev->of_node, "assert-reset-us",
> +				   &pdata->assert_reset_us);
> +
> +	ret = of_property_read_u32(dev->of_node, "deassert-reset-us",
> +				   &pdata->deassert_reset_us);

You need to document these.

Brian

> +
>  	return 0;
>  }
>  
> @@ -1002,14 +1037,16 @@ static int i2c_hid_probe(struct i2c_client *client,
>  		goto err;
>  	}
>  
> -	ret = regulator_enable(ihid->pdata.supply);
> +	ihid->pdata.reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
> +							 GPIOD_OUT_HIGH);
> +	if (IS_ERR(ihid->pdata.reset_gpio))
> +		goto err;
> +
> +	ret = i2c_hid_hw_power_on(ihid);
>  	if (ret < 0) {
> -		dev_err(&client->dev, "Failed to enable regulator: %d\n",
> -			ret);
> +		dev_err(&client->dev, "Failed to power on: %d\n", ret);
>  		goto err;
>  	}
> -	if (ihid->pdata.post_power_delay_ms)
> -		msleep(ihid->pdata.post_power_delay_ms);
>  
>  	i2c_set_clientdata(client, ihid);
>  
> @@ -1086,7 +1123,7 @@ static int i2c_hid_probe(struct i2c_client *client,
>  	pm_runtime_disable(&client->dev);
>  
>  err_regulator:
> -	regulator_disable(ihid->pdata.supply);
> +	i2c_hid_hw_power_off(ihid);
>  
>  err:
>  	i2c_hid_free_buffers(ihid);
> @@ -1112,8 +1149,7 @@ static int i2c_hid_remove(struct i2c_client *client)
>  	if (ihid->bufsize)
>  		i2c_hid_free_buffers(ihid);
>  
> -	regulator_disable(ihid->pdata.supply);
> -
> +	i2c_hid_hw_power_off(ihid);
>  	kfree(ihid);
>  
>  	return 0;
> @@ -1165,9 +1201,10 @@ static int i2c_hid_suspend(struct device *dev)
>  			hid_warn(hid, "Failed to enable irq wake: %d\n",
>  				wake_status);
>  	} else {
> -		ret = regulator_disable(ihid->pdata.supply);
> +		ret = i2c_hid_hw_power_off(ihid);
>  		if (ret < 0)
> -			hid_warn(hid, "Failed to disable supply: %d\n", ret);
> +			hid_warn(hid, "Failed to disable hw power: %d\n",
> +				 ret);
>  	}
>  
>  	return 0;
> @@ -1182,11 +1219,9 @@ static int i2c_hid_resume(struct device *dev)
>  	int wake_status;
>  
>  	if (!device_may_wakeup(&client->dev)) {
> -		ret = regulator_enable(ihid->pdata.supply);
> +		ret = i2c_hid_hw_power_on(ihid);
>  		if (ret < 0)
> -			hid_warn(hid, "Failed to enable supply: %d\n", ret);
> -		if (ihid->pdata.post_power_delay_ms)
> -			msleep(ihid->pdata.post_power_delay_ms);
> +			hid_warn(hid, "Failed to enable hw power: %d\n", ret);
>  	} else if (ihid->irq_wake_enabled) {
>  		wake_status = disable_irq_wake(client->irq);
>  		if (!wake_status)
> diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h
> index 1fb0882..3afc781 100644
> --- a/include/linux/platform_data/i2c-hid.h
> +++ b/include/linux/platform_data/i2c-hid.h
> @@ -14,6 +14,7 @@
>  
>  #include <linux/types.h>
>  
> +struct gpio_desc;
>  struct regulator;
>  
>  /**
> @@ -37,6 +38,9 @@ struct i2c_hid_platform_data {
>  	u16 hid_descriptor_address;
>  	struct regulator *supply;
>  	int post_power_delay_ms;
> +	struct gpio_desc *reset_gpio;
> +	int assert_reset_us;
> +	int deassert_reset_us;
>  };
>  
>  #endif /* __LINUX_I2C_HID_H */
> -- 
> 2.7.4
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html