From: Romain Izard <romain.izard.pro@gmail.com>
To: Herbert Xu <herbert@gondor.apana.org.au>,
"David S . Miller" <davem@davemloft.net>,
Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
linux-arm-kernel@lists.infradead.org,
linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
Romain Izard <romain.izard.pro@gmail.com>
Subject: [PATCH 1/2] crypto: atmel-aes - properly set IV after {en,de}crypt
Date: Tue, 31 Oct 2017 16:25:23 +0100 [thread overview]
Message-ID: <20171031152524.25216-2-romain.izard.pro@gmail.com> (raw)
In-Reply-To: <20171031152524.25216-1-romain.izard.pro@gmail.com>
Certain cipher modes like CTS expect the IV (req->info) of
ablkcipher_request (or equivalently req->iv of skcipher_request) to
contain the last ciphertext block when the {en,de}crypt operation is done.
Fix this issue for the Atmel AES hardware engine. The tcrypt test
case for cts(cbc(aes)) is now correctly passed.
In the case of in-place decryption, copy the ciphertext in an
intermediate buffer before decryption.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
---
drivers/crypto/atmel-aes.c | 40 +++++++++++++++++++++++++++++++++++++---
1 file changed, 37 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/atmel-aes.c b/drivers/crypto/atmel-aes.c
index 29e20c37f3a6..53432ab97d7e 100644
--- a/drivers/crypto/atmel-aes.c
+++ b/drivers/crypto/atmel-aes.c
@@ -110,6 +110,7 @@ struct atmel_aes_base_ctx {
int keylen;
u32 key[AES_KEYSIZE_256 / sizeof(u32)];
u16 block_size;
+ bool is_aead;
};
struct atmel_aes_ctx {
@@ -156,6 +157,7 @@ struct atmel_aes_authenc_ctx {
struct atmel_aes_reqctx {
unsigned long mode;
+ u32 lastc[AES_BLOCK_SIZE / sizeof(u32)];
};
#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
@@ -497,12 +499,34 @@ static void atmel_aes_authenc_complete(struct atmel_aes_dev *dd, int err);
static inline int atmel_aes_complete(struct atmel_aes_dev *dd, int err)
{
#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
- atmel_aes_authenc_complete(dd, err);
+ if (dd->ctx->is_aead)
+ atmel_aes_authenc_complete(dd, err);
#endif
clk_disable(dd->iclk);
dd->flags &= ~AES_FLAGS_BUSY;
+ if (!dd->ctx->is_aead) {
+ struct ablkcipher_request *req =
+ ablkcipher_request_cast(dd->areq);
+ struct atmel_aes_reqctx *rctx = ablkcipher_request_ctx(req);
+ struct crypto_ablkcipher *ablkcipher =
+ crypto_ablkcipher_reqtfm(req);
+ int ivsize = crypto_ablkcipher_ivsize(ablkcipher);
+
+ if (rctx->mode & AES_FLAGS_ENCRYPT) {
+ scatterwalk_map_and_copy(req->info, req->dst,
+ req->nbytes - ivsize, ivsize, 0);
+ } else {
+ if (req->src == req->dst) {
+ memcpy(req->info, rctx->lastc, ivsize);
+ } else {
+ scatterwalk_map_and_copy(req->info, req->src,
+ req->nbytes - ivsize, ivsize, 0);
+ }
+ }
+ }
+
if (dd->is_async)
dd->areq->complete(dd->areq, err);
@@ -1071,11 +1095,11 @@ static int atmel_aes_ctr_start(struct atmel_aes_dev *dd)
static int atmel_aes_crypt(struct ablkcipher_request *req, unsigned long mode)
{
- struct atmel_aes_base_ctx *ctx;
+ struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req);
+ struct atmel_aes_base_ctx *ctx = crypto_ablkcipher_ctx(ablkcipher);
struct atmel_aes_reqctx *rctx;
struct atmel_aes_dev *dd;
- ctx = crypto_ablkcipher_ctx(crypto_ablkcipher_reqtfm(req));
switch (mode & AES_FLAGS_OPMODE_MASK) {
case AES_FLAGS_CFB8:
ctx->block_size = CFB8_BLOCK_SIZE;
@@ -1097,6 +1121,7 @@ static int atmel_aes_crypt(struct ablkcipher_request *req, unsigned long mode)
ctx->block_size = AES_BLOCK_SIZE;
break;
}
+ ctx->is_aead = false;
dd = atmel_aes_find_dev(ctx);
if (!dd)
@@ -1105,6 +1130,13 @@ static int atmel_aes_crypt(struct ablkcipher_request *req, unsigned long mode)
rctx = ablkcipher_request_ctx(req);
rctx->mode = mode;
+ if (!(mode & AES_FLAGS_ENCRYPT) && (req->src == req->dst)) {
+ int ivsize = crypto_ablkcipher_ivsize(ablkcipher);
+
+ scatterwalk_map_and_copy(rctx->lastc, req->src,
+ (req->nbytes - ivsize), ivsize, 0);
+ }
+
return atmel_aes_handle_queue(dd, &req->base);
}
@@ -1739,6 +1771,7 @@ static int atmel_aes_gcm_crypt(struct aead_request *req,
ctx = crypto_aead_ctx(crypto_aead_reqtfm(req));
ctx->block_size = AES_BLOCK_SIZE;
+ ctx->is_aead = true;
dd = atmel_aes_find_dev(ctx);
if (!dd)
@@ -2223,6 +2256,7 @@ static int atmel_aes_authenc_crypt(struct aead_request *req,
rctx->base.mode = mode;
ctx->block_size = AES_BLOCK_SIZE;
+ ctx->is_aead = true;
dd = atmel_aes_find_dev(ctx);
if (!dd)
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: romain.izard.pro@gmail.com (Romain Izard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] crypto: atmel-aes - properly set IV after {en,de}crypt
Date: Tue, 31 Oct 2017 16:25:23 +0100 [thread overview]
Message-ID: <20171031152524.25216-2-romain.izard.pro@gmail.com> (raw)
In-Reply-To: <20171031152524.25216-1-romain.izard.pro@gmail.com>
Certain cipher modes like CTS expect the IV (req->info) of
ablkcipher_request (or equivalently req->iv of skcipher_request) to
contain the last ciphertext block when the {en,de}crypt operation is done.
Fix this issue for the Atmel AES hardware engine. The tcrypt test
case for cts(cbc(aes)) is now correctly passed.
In the case of in-place decryption, copy the ciphertext in an
intermediate buffer before decryption.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
---
drivers/crypto/atmel-aes.c | 40 +++++++++++++++++++++++++++++++++++++---
1 file changed, 37 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/atmel-aes.c b/drivers/crypto/atmel-aes.c
index 29e20c37f3a6..53432ab97d7e 100644
--- a/drivers/crypto/atmel-aes.c
+++ b/drivers/crypto/atmel-aes.c
@@ -110,6 +110,7 @@ struct atmel_aes_base_ctx {
int keylen;
u32 key[AES_KEYSIZE_256 / sizeof(u32)];
u16 block_size;
+ bool is_aead;
};
struct atmel_aes_ctx {
@@ -156,6 +157,7 @@ struct atmel_aes_authenc_ctx {
struct atmel_aes_reqctx {
unsigned long mode;
+ u32 lastc[AES_BLOCK_SIZE / sizeof(u32)];
};
#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
@@ -497,12 +499,34 @@ static void atmel_aes_authenc_complete(struct atmel_aes_dev *dd, int err);
static inline int atmel_aes_complete(struct atmel_aes_dev *dd, int err)
{
#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
- atmel_aes_authenc_complete(dd, err);
+ if (dd->ctx->is_aead)
+ atmel_aes_authenc_complete(dd, err);
#endif
clk_disable(dd->iclk);
dd->flags &= ~AES_FLAGS_BUSY;
+ if (!dd->ctx->is_aead) {
+ struct ablkcipher_request *req =
+ ablkcipher_request_cast(dd->areq);
+ struct atmel_aes_reqctx *rctx = ablkcipher_request_ctx(req);
+ struct crypto_ablkcipher *ablkcipher =
+ crypto_ablkcipher_reqtfm(req);
+ int ivsize = crypto_ablkcipher_ivsize(ablkcipher);
+
+ if (rctx->mode & AES_FLAGS_ENCRYPT) {
+ scatterwalk_map_and_copy(req->info, req->dst,
+ req->nbytes - ivsize, ivsize, 0);
+ } else {
+ if (req->src == req->dst) {
+ memcpy(req->info, rctx->lastc, ivsize);
+ } else {
+ scatterwalk_map_and_copy(req->info, req->src,
+ req->nbytes - ivsize, ivsize, 0);
+ }
+ }
+ }
+
if (dd->is_async)
dd->areq->complete(dd->areq, err);
@@ -1071,11 +1095,11 @@ static int atmel_aes_ctr_start(struct atmel_aes_dev *dd)
static int atmel_aes_crypt(struct ablkcipher_request *req, unsigned long mode)
{
- struct atmel_aes_base_ctx *ctx;
+ struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req);
+ struct atmel_aes_base_ctx *ctx = crypto_ablkcipher_ctx(ablkcipher);
struct atmel_aes_reqctx *rctx;
struct atmel_aes_dev *dd;
- ctx = crypto_ablkcipher_ctx(crypto_ablkcipher_reqtfm(req));
switch (mode & AES_FLAGS_OPMODE_MASK) {
case AES_FLAGS_CFB8:
ctx->block_size = CFB8_BLOCK_SIZE;
@@ -1097,6 +1121,7 @@ static int atmel_aes_crypt(struct ablkcipher_request *req, unsigned long mode)
ctx->block_size = AES_BLOCK_SIZE;
break;
}
+ ctx->is_aead = false;
dd = atmel_aes_find_dev(ctx);
if (!dd)
@@ -1105,6 +1130,13 @@ static int atmel_aes_crypt(struct ablkcipher_request *req, unsigned long mode)
rctx = ablkcipher_request_ctx(req);
rctx->mode = mode;
+ if (!(mode & AES_FLAGS_ENCRYPT) && (req->src == req->dst)) {
+ int ivsize = crypto_ablkcipher_ivsize(ablkcipher);
+
+ scatterwalk_map_and_copy(rctx->lastc, req->src,
+ (req->nbytes - ivsize), ivsize, 0);
+ }
+
return atmel_aes_handle_queue(dd, &req->base);
}
@@ -1739,6 +1771,7 @@ static int atmel_aes_gcm_crypt(struct aead_request *req,
ctx = crypto_aead_ctx(crypto_aead_reqtfm(req));
ctx->block_size = AES_BLOCK_SIZE;
+ ctx->is_aead = true;
dd = atmel_aes_find_dev(ctx);
if (!dd)
@@ -2223,6 +2256,7 @@ static int atmel_aes_authenc_crypt(struct aead_request *req,
rctx->base.mode = mode;
ctx->block_size = AES_BLOCK_SIZE;
+ ctx->is_aead = true;
dd = atmel_aes_find_dev(ctx);
if (!dd)
--
2.14.1
next prev parent reply other threads:[~2017-10-31 15:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-31 15:25 [PATCH 0/2] Fixes for the Atmel AES crypto module Romain Izard
2017-10-31 15:25 ` Romain Izard
2017-10-31 15:25 ` Romain Izard [this message]
2017-10-31 15:25 ` [PATCH 1/2] crypto: atmel-aes - properly set IV after {en,de}crypt Romain Izard
2017-10-31 15:25 ` [PATCH 2/2] crypto: atmel-aes - Reset the controller before each use Romain Izard
2017-10-31 15:25 ` Romain Izard
2017-11-06 15:45 ` Tudor Ambarus
2017-11-06 15:45 ` Tudor Ambarus
2017-11-06 15:57 ` Romain Izard
2017-11-06 15:57 ` Romain Izard
2017-11-03 14:28 ` [PATCH 0/2] Fixes for the Atmel AES crypto module Herbert Xu
2017-11-03 14:28 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171031152524.25216-2-romain.izard.pro@gmail.com \
--to=romain.izard.pro@gmail.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=tudor.ambarus@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.