[PATCH] clk: sunxi-ng: a83t: Fix i2c buses bits

[PATCH] clk: sunxi-ng: a83t: Fix i2c buses bits

[Mylène Josserand]

i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2.
Because of that, the i2c0 (bit 0) was not correctly configured.
Fixed the correct bits for i2c1 and i2c2.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
index e43acebdfbcd..f8203115a6bc 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
@@ -354,9 +354,9 @@ static SUNXI_CCU_GATE(bus_tdm_clk,	"bus-tdm",	"apb1",
 static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
 		      0x06c, BIT(0), 0);
 static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
-		      0x06c, BIT(0), 0);
+		      0x06c, BIT(1), 0);
 static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb2",
-		      0x06c, BIT(0), 0);
+		      0x06c, BIT(2), 0);
 static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
 		      0x06c, BIT(16), 0);
 static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
-- 
2.11.0

[PATCH] clk: sunxi-ng: a83t: Fix i2c buses bits

[Mylène Josserand]

i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2.
Because of that, the i2c0 (bit 0) was not correctly configured.
Fixed the correct bits for i2c1 and i2c2.

Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
index e43acebdfbcd..f8203115a6bc 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
@@ -354,9 +354,9 @@ static SUNXI_CCU_GATE(bus_tdm_clk,	"bus-tdm",	"apb1",
 static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
 		      0x06c, BIT(0), 0);
 static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
-		      0x06c, BIT(0), 0);
+		      0x06c, BIT(1), 0);
 static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb2",
-		      0x06c, BIT(0), 0);
+		      0x06c, BIT(2), 0);
 static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
 		      0x06c, BIT(16), 0);
 static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
-- 
2.11.0

Re: [PATCH] clk: sunxi-ng: a83t: Fix i2c buses bits

[Stephen Boyd]

On 11/03, Mylène Josserand wrote:
> i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2.
> Because of that, the i2c0 (bit 0) was not correctly configured.
> Fixed the correct bits for i2c1 and i2c2.
> 
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> ---

Please add a Fixes tag.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH] clk: sunxi-ng: a83t: Fix i2c buses bits

[Stephen Boyd]

On 11/03, Myl?ne Josserand wrote:
> i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2.
> Because of that, the i2c0 (bit 0) was not correctly configured.
> Fixed the correct bits for i2c1 and i2c2.
> 
> Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
> ---

Please add a Fixes tag.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH] clk: sunxi-ng: a83t: Fix i2c buses bits

[Mylene JOSSERAND]

Hello,

Le Fri, 3 Nov 2017 08:11:00 -0700,
Stephen Boyd <sboyd@codeaurora.org> a =C3=A9crit :

> On 11/03, Myl=C3=A8ne Josserand wrote:
> > i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2.
> > Because of that, the i2c0 (bit 0) was not correctly configured.
> > Fixed the correct bits for i2c1 and i2c2.
> >=20
> > Signed-off-by: Myl=C3=A8ne Josserand
> > <mylene.josserand@free-electrons.com> --- =20
>=20
> Please add a Fixes tag.
>=20

Sure, I will resend the patch with a Fixes tag.

Thank you,

--=20
Myl=C3=A8ne Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH] clk: sunxi-ng: a83t: Fix i2c buses bits

[Mylene JOSSERAND]

Hello,

Le Fri, 3 Nov 2017 08:11:00 -0700,
Stephen Boyd <sboyd@codeaurora.org> a ?crit :

> On 11/03, Myl?ne Josserand wrote:
> > i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2.
> > Because of that, the i2c0 (bit 0) was not correctly configured.
> > Fixed the correct bits for i2c1 and i2c2.
> > 
> > Signed-off-by: Myl?ne Josserand
> > <mylene.josserand@free-electrons.com> ---  
> 
> Please add a Fixes tag.
> 

Sure, I will resend the patch with a Fixes tag.

Thank you,

-- 
Myl?ne Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH] clk: sunxi-ng: a83t: Fix i2c buses bits

[Mylene JOSSERAND]

Hello,

Le Fri, 3 Nov 2017 08:11:00 -0700,
Stephen Boyd <sboyd@codeaurora.org> a écrit :

> On 11/03, Mylène Josserand wrote:
> > i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2.
> > Because of that, the i2c0 (bit 0) was not correctly configured.
> > Fixed the correct bits for i2c1 and i2c2.
> > 
> > Signed-off-by: Mylène Josserand
> > <mylene.josserand@free-electrons.com> ---  
> 
> Please add a Fixes tag.
> 

Sure, I will resend the patch with a Fixes tag.

Thank you,

-- 
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com