[PATCH-4.4.y 0/2] target: stable backports

[PATCH-4.4.y 0/2] target: stable backports

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@linux-iscsi.org>

Hi Greg-KH,

Here are two target patches for v4.4.y stable, the first of which
did not originally include a stable CC, and the latter did not apply
due to a minor context change.

The series has been cut against v4.4.98.  Please apply at your earliest
convenience.

Thank you,

--nab

Bart Van Assche (1):
  target/iscsi: Fix iSCSI task reassignment handling

Nicholas Bellinger (1):
  target: Fix node_acl demo-mode + uncached dynamic shutdown regression

 drivers/target/iscsi/iscsi_target.c    | 19 +++++++------------
 drivers/target/target_core_tpg.c       |  4 ++--
 drivers/target/target_core_transport.c |  4 ++--
 include/target/target_core_base.h      |  1 +
 4 files changed, 12 insertions(+), 16 deletions(-)

-- 
1.8.5.3

[PATCH-4.4.y 0/2] target: stable backports

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@linux-iscsi.org>

Hi Greg-KH,

Here are two target patches for v4.4.y stable, the first of which
did not originally include a stable CC, and the latter did not apply
due to a minor context change.

The series has been cut against v4.4.98.  Please apply at your earliest
convenience.

Thank you,

--nab

Bart Van Assche (1):
  target/iscsi: Fix iSCSI task reassignment handling

Nicholas Bellinger (1):
  target: Fix node_acl demo-mode + uncached dynamic shutdown regression

 drivers/target/iscsi/iscsi_target.c    | 19 +++++++------------
 drivers/target/target_core_tpg.c       |  4 ++--
 drivers/target/target_core_transport.c |  4 ++--
 include/target/target_core_base.h      |  1 +
 4 files changed, 12 insertions(+), 16 deletions(-)

-- 
1.8.5.3

[PATCH-4.4.y 2/2] target: Fix node_acl demo-mode + uncached dynamic shutdown regression

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 6f48655facfd7f7ccfe6d252ac0fe319ab02e4dd upstream.

This patch fixes a generate_node_acls = 1 + cache_dynamic_acls = 0
regression, that was introduced by

  commit 01d4d673558985d9a118e1e05026633c3e2ade9b
  Author: Nicholas Bellinger <nab@linux-iscsi.org>
  Date:   Wed Dec 7 12:55:54 2016 -0800

which originally had the proper list_del_init() usage, but was
dropped during list review as it was thought unnecessary by HCH.

However, list_del_init() usage is required during the special
generate_node_acls = 1 + cache_dynamic_acls = 0 case when
transport_free_session() does a list_del(&se_nacl->acl_list),
followed by target_complete_nacl() doing the same thing.

This was manifesting as a general protection fault as reported
by Justin:

kernel: general protection fault: 0000 [#1] SMP
kernel: Modules linked in:
kernel: CPU: 0 PID: 11047 Comm: iscsi_ttx Not tainted 4.13.0-rc2.x86_64.1+ #20
kernel: Hardware name: Intel Corporation S5500BC/S5500BC, BIOS S5500.86B.01.00.0064.050520141428 05/05/2014
kernel: task: ffff88026939e800 task.stack: ffffc90007884000
kernel: RIP: 0010:target_put_nacl+0x49/0xb0
kernel: RSP: 0018:ffffc90007887d70 EFLAGS: 00010246
kernel: RAX: dead000000000200 RBX: ffff8802556ca000 RCX: 0000000000000000
kernel: RDX: dead000000000100 RSI: 0000000000000246 RDI: ffff8802556ce028
kernel: RBP: ffffc90007887d88 R08: 0000000000000001 R09: 0000000000000000
kernel: R10: ffffc90007887df8 R11: ffffea0009986900 R12: ffff8802556ce020
kernel: R13: ffff8802556ce028 R14: ffff8802556ce028 R15: ffffffff88d85540
kernel: FS:  0000000000000000(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007fffe36f5f94 CR3: 0000000009209000 CR4: 00000000003406f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: Call Trace:
kernel:  transport_free_session+0x67/0x140
kernel:  transport_deregister_session+0x7a/0xc0
kernel:  iscsit_close_session+0x92/0x210
kernel:  iscsit_close_connection+0x5f9/0x840
kernel:  iscsit_take_action_for_connection_exit+0xfe/0x110
kernel:  iscsi_target_tx_thread+0x140/0x1e0
kernel:  ? wait_woken+0x90/0x90
kernel:  kthread+0x124/0x160
kernel:  ? iscsit_thread_get_cpumask+0x90/0x90
kernel:  ? kthread_create_on_node+0x40/0x40
kernel:  ret_from_fork+0x22/0x30
kernel: Code: 00 48 89 fb 4c 8b a7 48 01 00 00 74 68 4d 8d 6c 24 08 4c
89 ef e8 e8 28 43 00 48 8b 93 20 04 00 00 48 8b 83 28 04 00 00 4c 89
ef <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 20
kernel: RIP: target_put_nacl+0x49/0xb0 RSP: ffffc90007887d70
kernel: ---[ end trace f12821adbfd46fed ]---

To address this, go ahead and use proper list_del_list() for all
cases of se_nacl->acl_list deletion.

Reported-by: Justin Maggard <jmaggard01@gmail.com>
Tested-by: Justin Maggard <jmaggard01@gmail.com>
Cc: Justin Maggard <jmaggard01@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/target/target_core_tpg.c       | 4 ++--
 drivers/target/target_core_transport.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index f69f490..ee16a45 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -350,7 +350,7 @@ void core_tpg_del_initiator_node_acl(struct se_node_acl *acl)
 	if (acl->dynamic_node_acl) {
 		acl->dynamic_node_acl = 0;
 	}
-	list_del(&acl->acl_list);
+	list_del_init(&acl->acl_list);
 	tpg->num_node_acls--;
 	mutex_unlock(&tpg->acl_node_mutex);
 
@@ -572,7 +572,7 @@ int core_tpg_deregister(struct se_portal_group *se_tpg)
 	 * in transport_deregister_session().
 	 */
 	list_for_each_entry_safe(nacl, nacl_tmp, &node_list, acl_list) {
-		list_del(&nacl->acl_list);
+		list_del_init(&nacl->acl_list);
 		se_tpg->num_node_acls--;
 
 		core_tpg_wait_for_nacl_pr_ref(nacl);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index f71bede..a42054e 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -431,7 +431,7 @@ static void target_complete_nacl(struct kref *kref)
 	}
 
 	mutex_lock(&se_tpg->acl_node_mutex);
-	list_del(&nacl->acl_list);
+	list_del_init(&nacl->acl_list);
 	mutex_unlock(&se_tpg->acl_node_mutex);
 
 	core_tpg_wait_for_nacl_pr_ref(nacl);
@@ -503,7 +503,7 @@ void transport_free_session(struct se_session *se_sess)
 			spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags);
 
 			if (se_nacl->dynamic_stop)
-				list_del(&se_nacl->acl_list);
+				list_del_init(&se_nacl->acl_list);
 		}
 		mutex_unlock(&se_tpg->acl_node_mutex);
 
-- 
1.8.5.3

[PATCH-4.4.y 2/2] target: Fix node_acl demo-mode + uncached dynamic shutdown regression

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 6f48655facfd7f7ccfe6d252ac0fe319ab02e4dd upstream.

This patch fixes a generate_node_acls = 1 + cache_dynamic_acls = 0
regression, that was introduced by

  commit 01d4d673558985d9a118e1e05026633c3e2ade9b
  Author: Nicholas Bellinger <nab@linux-iscsi.org>
  Date:   Wed Dec 7 12:55:54 2016 -0800

which originally had the proper list_del_init() usage, but was
dropped during list review as it was thought unnecessary by HCH.

However, list_del_init() usage is required during the special
generate_node_acls = 1 + cache_dynamic_acls = 0 case when
transport_free_session() does a list_del(&se_nacl->acl_list),
followed by target_complete_nacl() doing the same thing.

This was manifesting as a general protection fault as reported
by Justin:

kernel: general protection fault: 0000 [#1] SMP
kernel: Modules linked in:
kernel: CPU: 0 PID: 11047 Comm: iscsi_ttx Not tainted 4.13.0-rc2.x86_64.1+ #20
kernel: Hardware name: Intel Corporation S5500BC/S5500BC, BIOS S5500.86B.01.00.0064.050520141428 05/05/2014
kernel: task: ffff88026939e800 task.stack: ffffc90007884000
kernel: RIP: 0010:target_put_nacl+0x49/0xb0
kernel: RSP: 0018:ffffc90007887d70 EFLAGS: 00010246
kernel: RAX: dead000000000200 RBX: ffff8802556ca000 RCX: 0000000000000000
kernel: RDX: dead000000000100 RSI: 0000000000000246 RDI: ffff8802556ce028
kernel: RBP: ffffc90007887d88 R08: 0000000000000001 R09: 0000000000000000
kernel: R10: ffffc90007887df8 R11: ffffea0009986900 R12: ffff8802556ce020
kernel: R13: ffff8802556ce028 R14: ffff8802556ce028 R15: ffffffff88d85540
kernel: FS:  0000000000000000(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007fffe36f5f94 CR3: 0000000009209000 CR4: 00000000003406f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: Call Trace:
kernel:  transport_free_session+0x67/0x140
kernel:  transport_deregister_session+0x7a/0xc0
kernel:  iscsit_close_session+0x92/0x210
kernel:  iscsit_close_connection+0x5f9/0x840
kernel:  iscsit_take_action_for_connection_exit+0xfe/0x110
kernel:  iscsi_target_tx_thread+0x140/0x1e0
kernel:  ? wait_woken+0x90/0x90
kernel:  kthread+0x124/0x160
kernel:  ? iscsit_thread_get_cpumask+0x90/0x90
kernel:  ? kthread_create_on_node+0x40/0x40
kernel:  ret_from_fork+0x22/0x30
kernel: Code: 00 48 89 fb 4c 8b a7 48 01 00 00 74 68 4d 8d 6c 24 08 4c
89 ef e8 e8 28 43 00 48 8b 93 20 04 00 00 48 8b 83 28 04 00 00 4c 89
ef <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 20
kernel: RIP: target_put_nacl+0x49/0xb0 RSP: ffffc90007887d70
kernel: ---[ end trace f12821adbfd46fed ]---

To address this, go ahead and use proper list_del_list() for all
cases of se_nacl->acl_list deletion.

Reported-by: Justin Maggard <jmaggard01@gmail.com>
Tested-by: Justin Maggard <jmaggard01@gmail.com>
Cc: Justin Maggard <jmaggard01@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/target/target_core_tpg.c       | 4 ++--
 drivers/target/target_core_transport.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index f69f490..ee16a45 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -350,7 +350,7 @@ void core_tpg_del_initiator_node_acl(struct se_node_acl *acl)
 	if (acl->dynamic_node_acl) {
 		acl->dynamic_node_acl = 0;
 	}
-	list_del(&acl->acl_list);
+	list_del_init(&acl->acl_list);
 	tpg->num_node_acls--;
 	mutex_unlock(&tpg->acl_node_mutex);
 
@@ -572,7 +572,7 @@ int core_tpg_deregister(struct se_portal_group *se_tpg)
 	 * in transport_deregister_session().
 	 */
 	list_for_each_entry_safe(nacl, nacl_tmp, &node_list, acl_list) {
-		list_del(&nacl->acl_list);
+		list_del_init(&nacl->acl_list);
 		se_tpg->num_node_acls--;
 
 		core_tpg_wait_for_nacl_pr_ref(nacl);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index f71bede..a42054e 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -431,7 +431,7 @@ static void target_complete_nacl(struct kref *kref)
 	}
 
 	mutex_lock(&se_tpg->acl_node_mutex);
-	list_del(&nacl->acl_list);
+	list_del_init(&nacl->acl_list);
 	mutex_unlock(&se_tpg->acl_node_mutex);
 
 	core_tpg_wait_for_nacl_pr_ref(nacl);
@@ -503,7 +503,7 @@ void transport_free_session(struct se_session *se_sess)
 			spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags);
 
 			if (se_nacl->dynamic_stop)
-				list_del(&se_nacl->acl_list);
+				list_del_init(&se_nacl->acl_list);
 		}
 		mutex_unlock(&se_tpg->acl_node_mutex);
 
-- 
1.8.5.3

[PATCH-4.4.y 1/2] target/iscsi: Fix iSCSI task reassignment handling

[Nicholas A. Bellinger]

From: Bart Van Assche <bart.vanassche@sandisk.com>

commit 59b6986dbfcdab96a971f9663221849de79a7556 upstream.

Allocate a task management request structure for all task management
requests, including task reassignment. This change avoids that the
se_tmr->response assignment dereferences an uninitialized se_tmr
pointer.

Reported-by: Moshe David <mdavid@infinidat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Moshe David <mdavid@infinidat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
 drivers/target/iscsi/iscsi_target.c | 19 +++++++------------
 include/target/target_core_base.h   |  1 +
 2 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 1ff1c83..fd49341 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1759,7 +1759,7 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 	struct iscsi_tm *hdr;
 	int out_of_order_cmdsn = 0, ret;
 	bool sess_ref = false;
-	u8 function;
+	u8 function, tcm_function = TMR_UNKNOWN;
 
 	hdr			= (struct iscsi_tm *) buf;
 	hdr->flags &= ~ISCSI_FLAG_CMD_FINAL;
@@ -1805,10 +1805,6 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 	 * LIO-Target $FABRIC_MOD
 	 */
 	if (function != ISCSI_TM_FUNC_TASK_REASSIGN) {
-
-		u8 tcm_function;
-		int ret;
-
 		transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops,
 				      conn->sess->se_sess, 0, DMA_NONE,
 				      TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
@@ -1844,15 +1840,14 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 			return iscsit_add_reject_cmd(cmd,
 				ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 		}
-
-		ret = core_tmr_alloc_req(&cmd->se_cmd, cmd->tmr_req,
-					 tcm_function, GFP_KERNEL);
-		if (ret < 0)
-			return iscsit_add_reject_cmd(cmd,
+	}
+	ret = core_tmr_alloc_req(&cmd->se_cmd, cmd->tmr_req, tcm_function,
+				 GFP_KERNEL);
+	if (ret < 0)
+		return iscsit_add_reject_cmd(cmd,
 				ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 
-		cmd->tmr_req->se_tmr_req = cmd->se_cmd.se_tmr_req;
-	}
+	cmd->tmr_req->se_tmr_req = cmd->se_cmd.se_tmr_req;
 
 	cmd->iscsi_opcode	= ISCSI_OP_SCSI_TMFUNC;
 	cmd->i_state		= ISTATE_SEND_TASKMGTRSP;
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 1adf873..8555321 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -199,6 +199,7 @@ enum tcm_tmreq_table {
 	TMR_LUN_RESET		= 5,
 	TMR_TARGET_WARM_RESET	= 6,
 	TMR_TARGET_COLD_RESET	= 7,
+	TMR_UNKNOWN		= 0xff,
 };
 
 /* fabric independent task management response values */
-- 
1.8.5.3

[PATCH-4.4.y 1/2] target/iscsi: Fix iSCSI task reassignment handling

[Nicholas A. Bellinger]

From: Bart Van Assche <bart.vanassche@sandisk.com>

commit 59b6986dbfcdab96a971f9663221849de79a7556 upstream.

Allocate a task management request structure for all task management
requests, including task reassignment. This change avoids that the
se_tmr->response assignment dereferences an uninitialized se_tmr
pointer.

Reported-by: Moshe David <mdavid@infinidat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Moshe David <mdavid@infinidat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
 drivers/target/iscsi/iscsi_target.c | 19 +++++++------------
 include/target/target_core_base.h   |  1 +
 2 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 1ff1c83..fd49341 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1759,7 +1759,7 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 	struct iscsi_tm *hdr;
 	int out_of_order_cmdsn = 0, ret;
 	bool sess_ref = false;
-	u8 function;
+	u8 function, tcm_function = TMR_UNKNOWN;
 
 	hdr			= (struct iscsi_tm *) buf;
 	hdr->flags &= ~ISCSI_FLAG_CMD_FINAL;
@@ -1805,10 +1805,6 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 	 * LIO-Target $FABRIC_MOD
 	 */
 	if (function != ISCSI_TM_FUNC_TASK_REASSIGN) {
-
-		u8 tcm_function;
-		int ret;
-
 		transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops,
 				      conn->sess->se_sess, 0, DMA_NONE,
 				      TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
@@ -1844,15 +1840,14 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 			return iscsit_add_reject_cmd(cmd,
 				ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 		}
-
-		ret = core_tmr_alloc_req(&cmd->se_cmd, cmd->tmr_req,
-					 tcm_function, GFP_KERNEL);
-		if (ret < 0)
-			return iscsit_add_reject_cmd(cmd,
+	}
+	ret = core_tmr_alloc_req(&cmd->se_cmd, cmd->tmr_req, tcm_function,
+				 GFP_KERNEL);
+	if (ret < 0)
+		return iscsit_add_reject_cmd(cmd,
 				ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 
-		cmd->tmr_req->se_tmr_req = cmd->se_cmd.se_tmr_req;
-	}
+	cmd->tmr_req->se_tmr_req = cmd->se_cmd.se_tmr_req;
 
 	cmd->iscsi_opcode	= ISCSI_OP_SCSI_TMFUNC;
 	cmd->i_state		= ISTATE_SEND_TASKMGTRSP;
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 1adf873..8555321 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -199,6 +199,7 @@ enum tcm_tmreq_table {
 	TMR_LUN_RESET		= 5,
 	TMR_TARGET_WARM_RESET	= 6,
 	TMR_TARGET_COLD_RESET	= 7,
+	TMR_UNKNOWN		= 0xff,
 };
 
 /* fabric independent task management response values */
-- 
1.8.5.3

Re: [PATCH-4.4.y 0/2] target: stable backports

[Greg-KH]

On Thu, Nov 16, 2017 at 06:07:50AM +0000, Nicholas A. Bellinger wrote:
> From: Nicholas Bellinger <nab@linux-iscsi.org>
> 
> Hi Greg-KH,
> 
> Here are two target patches for v4.4.y stable, the first of which
> did not originally include a stable CC, and the latter did not apply
> due to a minor context change.
> 
> The series has been cut against v4.4.98.  Please apply at your earliest
> convenience.

All applied, thanks.

greg k-h

Re: [PATCH-4.4.y 0/2] target: stable backports

[Greg-KH]

On Thu, Nov 16, 2017 at 06:07:50AM +0000, Nicholas A. Bellinger wrote:
> From: Nicholas Bellinger <nab@linux-iscsi.org>
> 
> Hi Greg-KH,
> 
> Here are two target patches for v4.4.y stable, the first of which
> did not originally include a stable CC, and the latter did not apply
> due to a minor context change.
> 
> The series has been cut against v4.4.98.  Please apply at your earliest
> convenience.

All applied, thanks.

greg k-h

[PATCH-4.4.y 0/2] target: stable backports

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@linux-iscsi.org>

Hi Greg-KH,

Here are two target patches for v4.4.y stable, which did not apply
due to minor context changes.

The series has been cut against v4.4.111.  Please apply at your earliest
convenience.

Thank you,

--nab

Nicholas Bellinger (2):
  iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref
  target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK

 drivers/target/iscsi/iscsi_target.c    | 20 +++++++-------------
 drivers/target/target_core_tmr.c       |  9 +++++++++
 drivers/target/target_core_transport.c |  2 ++
 include/target/target_core_base.h      |  1 +
 4 files changed, 19 insertions(+), 13 deletions(-)

-- 
1.8.5.3

[PATCH-4.4.y 0/2] target: stable backports

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@linux-iscsi.org>

Hi Greg-KH,

Here are two target patches for v4.4.y stable, which did not apply
due to minor context changes.

The series has been cut against v4.4.111.  Please apply at your earliest
convenience.

Thank you,

--nab

Nicholas Bellinger (2):
  iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref
  target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK

 drivers/target/iscsi/iscsi_target.c    | 20 +++++++-------------
 drivers/target/target_core_tmr.c       |  9 +++++++++
 drivers/target/target_core_transport.c |  2 ++
 include/target/target_core_base.h      |  1 +
 4 files changed, 19 insertions(+), 13 deletions(-)

-- 
1.8.5.3

[PATCH-4.4.y 1/2] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit ae072726f6109bb1c94841d6fb3a82dde298ea85 upstream.

Since commit 59b6986dbf fixed a potential NULL pointer dereference
by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the
se_tmr_req is currently leaked by iscsit_free_cmd() because no
iscsi_cmd->se_cmd.se_tfo was associated.

To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other
TMR and call transport_init_se_cmd() + target_get_sess_cmd() to
setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2.

This will ensure normal release operation once se_cmd->cmd_kref
reaches zero and target_release_cmd_kref() is invoked, se_tmr_req
will be released via existing target_free_cmd_mem() and
core_tmr_release_req() code.

Reported-by: Donald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
 drivers/target/iscsi/iscsi_target.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 8a4092c..58fe277 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1759,7 +1759,6 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 	struct iscsi_tmr_req *tmr_req;
 	struct iscsi_tm *hdr;
 	int out_of_order_cmdsn = 0, ret;
-	bool sess_ref = false;
 	u8 function, tcm_function = TMR_UNKNOWN;
 
 	hdr			= (struct iscsi_tm *) buf;
@@ -1801,18 +1800,17 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 					     buf);
 	}
 
+	transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops,
+			      conn->sess->se_sess, 0, DMA_NONE,
+			      TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
+
+	target_get_sess_cmd(&cmd->se_cmd, true);
+
 	/*
 	 * TASK_REASSIGN for ERL=2 / connection stays inside of
 	 * LIO-Target $FABRIC_MOD
 	 */
 	if (function != ISCSI_TM_FUNC_TASK_REASSIGN) {
-		transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops,
-				      conn->sess->se_sess, 0, DMA_NONE,
-				      TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
-
-		target_get_sess_cmd(&cmd->se_cmd, true);
-		sess_ref = true;
-
 		switch (function) {
 		case ISCSI_TM_FUNC_ABORT_TASK:
 			tcm_function = TMR_ABORT_TASK;
@@ -1951,12 +1949,8 @@ attach:
 	 * For connection recovery, this is also the default action for
 	 * TMR TASK_REASSIGN.
 	 */
-	if (sess_ref) {
-		pr_debug("Handle TMR, using sess_ref=true check\n");
-		target_put_sess_cmd(&cmd->se_cmd);
-	}
-
 	iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
+	target_put_sess_cmd(&cmd->se_cmd);
 	return 0;
 }
 EXPORT_SYMBOL(iscsit_handle_task_mgt_cmd);
-- 
1.8.5.3

[PATCH-4.4.y 2/2] target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 1c21a48055a67ceb693e9c2587824a8de60a217c upstream.

This patch fixes bug where early se_cmd exceptions that occur
before backend execution can result in use-after-free if/when
a subsequent ABORT_TASK occurs for the same tag.

Since an early se_cmd exception will have had se_cmd added to
se_session->sess_cmd_list via target_get_sess_cmd(), it will
not have CMD_T_COMPLETE set by the usual target_complete_cmd()
backend completion path.

This causes a subsequent ABORT_TASK + __target_check_io_state()
to signal ABORT_TASK should proceed.  As core_tmr_abort_task()
executes, it will bring the outstanding se_cmd->cmd_kref count
down to zero releasing se_cmd, after se_cmd has already been
queued with error status into fabric driver response path code.

To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is
set at target_get_sess_cmd() time, and cleared immediately before
backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE
is set.

Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to
determine when an early exception has occured, and avoid aborting
this se_cmd since it will have already been queued into fabric
driver response path code.

Reported-by: Donald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
 drivers/target/target_core_tmr.c       | 9 +++++++++
 drivers/target/target_core_transport.c | 2 ++
 include/target/target_core_base.h      | 1 +
 3 files changed, 12 insertions(+)

diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index c9be953..e926dd5 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -133,6 +133,15 @@ static bool __target_check_io_state(struct se_cmd *se_cmd,
 		spin_unlock(&se_cmd->t_state_lock);
 		return false;
 	}
+	if (se_cmd->transport_state & CMD_T_PRE_EXECUTE) {
+		if (se_cmd->scsi_status) {
+			pr_debug("Attempted to abort io tag: %llu early failure"
+				 " status: 0x%02x\n", se_cmd->tag,
+				 se_cmd->scsi_status);
+			spin_unlock(&se_cmd->t_state_lock);
+			return false;
+		}
+	}
 	if (sess->sess_tearing_down || se_cmd->cmd_wait_set) {
 		pr_debug("Attempted to abort io tag: %llu already shutdown,"
 			" skipping\n", se_cmd->tag);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 37abf88..21f888a 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1933,6 +1933,7 @@ void target_execute_cmd(struct se_cmd *cmd)
 	}
 
 	cmd->t_state = TRANSPORT_PROCESSING;
+	cmd->transport_state &= ~CMD_T_PRE_EXECUTE;
 	cmd->transport_state |= CMD_T_ACTIVE|CMD_T_BUSY|CMD_T_SENT;
 	spin_unlock_irq(&cmd->t_state_lock);
 
@@ -2572,6 +2573,7 @@ int target_get_sess_cmd(struct se_cmd *se_cmd, bool ack_kref)
 		ret = -ESHUTDOWN;
 		goto out;
 	}
+	se_cmd->transport_state |= CMD_T_PRE_EXECUTE;
 	list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list);
 out:
 	spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 9982a2b..0eed9fd 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -496,6 +496,7 @@ struct se_cmd {
 #define CMD_T_BUSY		(1 << 9)
 #define CMD_T_TAS		(1 << 10)
 #define CMD_T_FABRIC_STOP	(1 << 11)
+#define CMD_T_PRE_EXECUTE	(1 << 12)
 	spinlock_t		t_state_lock;
 	struct kref		cmd_kref;
 	struct completion	t_transport_stop_comp;
-- 
1.8.5.3

Re: [PATCH-4.4.y 0/2] target: stable backports

[Greg-KH]

On Fri, Jan 12, 2018 at 11:51:30PM +0000, Nicholas A. Bellinger wrote:
> From: Nicholas Bellinger <nab@linux-iscsi.org>
> 
> Hi Greg-KH,
> 
> Here are two target patches for v4.4.y stable, which did not apply
> due to minor context changes.
> 
> The series has been cut against v4.4.111.  Please apply at your earliest
> convenience.

Both patches applied, thanks.

greg k-h

Re: [PATCH-4.4.y 0/2] target: stable backports

[Greg-KH]

On Fri, Jan 12, 2018 at 11:51:30PM +0000, Nicholas A. Bellinger wrote:
> From: Nicholas Bellinger <nab@linux-iscsi.org>
> 
> Hi Greg-KH,
> 
> Here are two target patches for v4.4.y stable, which did not apply
> due to minor context changes.
> 
> The series has been cut against v4.4.111.  Please apply at your earliest
> convenience.

Both patches applied, thanks.

greg k-h

[PATCH-4.4.y 0/2] target: stable backports

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@linux-iscsi.org>

Hi Greg-KH,

Here are two target stable backport patches missing from v4.4.y,
that have been updated to apply against v4.4.42.

Please apply to queue-4.4.

Thank you,

Nicholas Bellinger (2):
  target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
  target: Fix multi-session dynamic se_node_acl double free OOPs

 drivers/target/iscsi/iscsi_target.c    |  2 +-
 drivers/target/target_core_tpg.c       | 42 ++++++++++++++++-
 drivers/target/target_core_transport.c | 85 +++++++++++++++++++++-------------
 include/target/target_core_base.h      |  1 +
 include/target/target_core_fabric.h    |  2 +
 5 files changed, 99 insertions(+), 33 deletions(-)

-- 
1.8.5.3

Re: [PATCH-4.4.y 0/2] target: stable backports

[Greg-KH]

On Thu, Mar 09, 2017 at 02:33:10AM +0000, Nicholas A. Bellinger wrote:
> From: Nicholas Bellinger <nab@linux-iscsi.org>
> 
> Hi Greg-KH,
> 
> Here are two target stable backport patches missing from v4.4.y,
> that have been updated to apply against v4.4.42.
> 
> Please apply to queue-4.4.

Both now applied, thanks!

greg k-h