All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [(resend) PATCH 1/2] drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3.
Date: Fri, 17 Nov 2017 15:31:20 +0200	[thread overview]
Message-ID: <20171117133120.GJ10981@intel.com> (raw)
In-Reply-To: <20171115163157.14372-1-maarten.lankhorst@linux.intel.com>

On Wed, Nov 15, 2017 at 05:31:56PM +0100, Maarten Lankhorst wrote:
> The watermarks it should calculate against are the old optimal watermarks.
> The currently active crtc watermarks are pure fiction, and are invalid in
> case of a nonblocking modeset, page flip enabling/disabling planes or any
> other reason.
> 
> When the crtc is disabled or during a modeset the intermediate watermarks
> don't need to be programmed separately, and could be directly assigned
> to the optimal watermarks.
> 
> CXSR must always be disabled in the intermediate case for modesets, else
> we get a WARN for vblank wait timeout.
> 
> Also rename crtc_state to new_crtc_state, to distinguish it from the old state.
> 
> Changes since v1:
> - Use intel_atomic_get_old_crtc_state. (ville)
> Changes since v2:
> - Always unset cxsr during modeset.
> 
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

I was going to try and figure out how/if these get rid of the unclaimed
reg warns, but I didn't quite get that far. I did spot a few other
buglets in the wm code though (I'll send fixes for those at some point).

Anyways, these patches make sense to me, so for the series
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_pm.c | 24 ++++++++++++++++++------
>  1 file changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 8c69ec9eb6ee..f904bf73dbd6 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2026,16 +2026,27 @@ static void vlv_atomic_update_fifo(struct intel_atomic_state *state,
>  
>  static int vlv_compute_intermediate_wm(struct drm_device *dev,
>  				       struct intel_crtc *crtc,
> -				       struct intel_crtc_state *crtc_state)
> +				       struct intel_crtc_state *new_crtc_state)
>  {
> -	struct vlv_wm_state *intermediate = &crtc_state->wm.vlv.intermediate;
> -	const struct vlv_wm_state *optimal = &crtc_state->wm.vlv.optimal;
> -	const struct vlv_wm_state *active = &crtc->wm.active.vlv;
> +	struct vlv_wm_state *intermediate = &new_crtc_state->wm.vlv.intermediate;
> +	const struct vlv_wm_state *optimal = &new_crtc_state->wm.vlv.optimal;
> +	struct intel_atomic_state *intel_state =
> +		to_intel_atomic_state(new_crtc_state->base.state);
> +	const struct intel_crtc_state *old_crtc_state =
> +		intel_atomic_get_old_crtc_state(intel_state, crtc);
> +	const struct vlv_wm_state *active = &old_crtc_state->wm.vlv.optimal;
>  	int level;
>  
> +	if (!new_crtc_state->base.active || drm_atomic_crtc_needs_modeset(&new_crtc_state->base)) {
> +		*intermediate = *optimal;
> +
> +		intermediate->cxsr = false;
> +		goto out;
> +	}
> +
>  	intermediate->num_levels = min(optimal->num_levels, active->num_levels);
>  	intermediate->cxsr = optimal->cxsr && active->cxsr &&
> -		!crtc_state->disable_cxsr;
> +		!new_crtc_state->disable_cxsr;
>  
>  	for (level = 0; level < intermediate->num_levels; level++) {
>  		enum plane_id plane_id;
> @@ -2054,12 +2065,13 @@ static int vlv_compute_intermediate_wm(struct drm_device *dev,
>  
>  	vlv_invalidate_wms(crtc, intermediate, level);
>  
> +out:
>  	/*
>  	 * If our intermediate WM are identical to the final WM, then we can
>  	 * omit the post-vblank programming; only update if it's different.
>  	 */
>  	if (memcmp(intermediate, optimal, sizeof(*intermediate)) != 0)
> -		crtc_state->wm.need_postvbl_update = true;
> +		new_crtc_state->wm.need_postvbl_update = true;
>  
>  	return 0;
>  }
> -- 
> 2.15.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2017-11-17 13:31 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-15 16:31 [(resend) PATCH 1/2] drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3 Maarten Lankhorst
2017-11-15 16:31 ` [(resend) PATCH 2/2] drm/i915: Calculate g4x intermediate watermarks correctly Maarten Lankhorst
2017-11-15 16:53 ` ✓ Fi.CI.BAT: success for series starting with [(resend),1/2] drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3 Patchwork
2017-11-15 18:24 ` ✗ Fi.CI.IGT: failure " Patchwork
2017-11-17 13:31 ` Ville Syrjälä [this message]
2017-11-17 14:47   ` [(resend) PATCH 1/2] " Maarten Lankhorst
2017-11-17 14:53     ` Ville Syrjälä
2017-11-17 15:00       ` Maarten Lankhorst

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171117133120.GJ10981@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=maarten.lankhorst@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.