From: jic23@kernel.org (Jonathan Cameron)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 2/5] iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs
Date: Sun, 19 Nov 2017 15:44:22 +0000 [thread overview]
Message-ID: <20171119154422.3716b00e@archlinux> (raw)
In-Reply-To: <20171031200147.14660-3-martin.blumenstingl@googlemail.com>
On Tue, 31 Oct 2017 21:01:44 +0100
Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote:
> Meson8 and Meson8b do not have the MESON_SAR_ADC_REG11 register. The
> bandgap setting for these SoCs is configured in the
> MESON_SAR_ADC_DELTA_10 register instead.
> Make the driver aware of this difference and use the correct bandgap
> register depending on the SoC.
> This has worked fine on Meson8 and Meson8b because the bootloader is
> already initializing the bandgap setting.
>
> Fixes: 6c76ed31cd05 ("iio: adc: meson-saradc: add Meson8b SoC compatibility")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Applied to the fixes-togreg branch of iio.git and marked for stable.
Thanks,
Jonathan
> ---
> drivers/iio/adc/meson_saradc.c | 33 ++++++++++++++++++++++++++-------
> 1 file changed, 26 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> index 55611244c799..abe9df879b2a 100644
> --- a/drivers/iio/adc/meson_saradc.c
> +++ b/drivers/iio/adc/meson_saradc.c
> @@ -221,6 +221,7 @@ enum meson_sar_adc_chan7_mux_sel {
>
> struct meson_sar_adc_data {
> bool has_bl30_integration;
> + u32 bandgap_reg;
> unsigned int resolution;
> const char *name;
> };
> @@ -685,6 +686,20 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
> return 0;
> }
>
> +static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
> +{
> + struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> + u32 enable_mask;
> +
> + if (priv->data->bandgap_reg == MESON_SAR_ADC_REG11)
> + enable_mask = MESON_SAR_ADC_REG11_BANDGAP_EN;
> + else
> + enable_mask = MESON_SAR_ADC_DELTA_10_TS_VBG_EN;
> +
> + regmap_update_bits(priv->regmap, priv->data->bandgap_reg, enable_mask,
> + on_off ? enable_mask : 0);
> +}
> +
> static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
> {
> struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> @@ -717,9 +732,9 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
> regval = FIELD_PREP(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, 1);
> regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
> MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval);
> - regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
> - MESON_SAR_ADC_REG11_BANDGAP_EN,
> - MESON_SAR_ADC_REG11_BANDGAP_EN);
> +
> + meson_sar_adc_set_bandgap(indio_dev, true);
> +
> regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
> MESON_SAR_ADC_REG3_ADC_EN,
> MESON_SAR_ADC_REG3_ADC_EN);
> @@ -739,8 +754,7 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
> err_adc_clk:
> regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
> MESON_SAR_ADC_REG3_ADC_EN, 0);
> - regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
> - MESON_SAR_ADC_REG11_BANDGAP_EN, 0);
> + meson_sar_adc_set_bandgap(indio_dev, false);
> clk_disable_unprepare(priv->sana_clk);
> err_sana_clk:
> clk_disable_unprepare(priv->core_clk);
> @@ -765,8 +779,8 @@ static int meson_sar_adc_hw_disable(struct iio_dev *indio_dev)
>
> regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
> MESON_SAR_ADC_REG3_ADC_EN, 0);
> - regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
> - MESON_SAR_ADC_REG11_BANDGAP_EN, 0);
> +
> + meson_sar_adc_set_bandgap(indio_dev, false);
>
> clk_disable_unprepare(priv->sana_clk);
> clk_disable_unprepare(priv->core_clk);
> @@ -845,30 +859,35 @@ static const struct iio_info meson_sar_adc_iio_info = {
>
> static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
> .has_bl30_integration = false,
> + .bandgap_reg = MESON_SAR_ADC_DELTA_10,
> .resolution = 10,
> .name = "meson-meson8-saradc",
> };
>
> static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
> .has_bl30_integration = false,
> + .bandgap_reg = MESON_SAR_ADC_DELTA_10,
> .resolution = 10,
> .name = "meson-meson8b-saradc",
> };
>
> static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
> .has_bl30_integration = true,
> + .bandgap_reg = MESON_SAR_ADC_REG11,
> .resolution = 10,
> .name = "meson-gxbb-saradc",
> };
>
> static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
> .has_bl30_integration = true,
> + .bandgap_reg = MESON_SAR_ADC_REG11,
> .resolution = 12,
> .name = "meson-gxl-saradc",
> };
>
> static const struct meson_sar_adc_data meson_sar_adc_gxm_data = {
> .has_bl30_integration = true,
> + .bandgap_reg = MESON_SAR_ADC_REG11,
> .resolution = 12,
> .name = "meson-gxm-saradc",
> };
WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jic23@kernel.org>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-iio@vger.kernel.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, linux-amlogic@lists.infradead.org
Subject: Re: [PATCH 2/5] iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs
Date: Sun, 19 Nov 2017 15:44:22 +0000 [thread overview]
Message-ID: <20171119154422.3716b00e@archlinux> (raw)
In-Reply-To: <20171031200147.14660-3-martin.blumenstingl@googlemail.com>
On Tue, 31 Oct 2017 21:01:44 +0100
Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote:
> Meson8 and Meson8b do not have the MESON_SAR_ADC_REG11 register. The
> bandgap setting for these SoCs is configured in the
> MESON_SAR_ADC_DELTA_10 register instead.
> Make the driver aware of this difference and use the correct bandgap
> register depending on the SoC.
> This has worked fine on Meson8 and Meson8b because the bootloader is
> already initializing the bandgap setting.
>
> Fixes: 6c76ed31cd05 ("iio: adc: meson-saradc: add Meson8b SoC compatibility")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Applied to the fixes-togreg branch of iio.git and marked for stable.
Thanks,
Jonathan
> ---
> drivers/iio/adc/meson_saradc.c | 33 ++++++++++++++++++++++++++-------
> 1 file changed, 26 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> index 55611244c799..abe9df879b2a 100644
> --- a/drivers/iio/adc/meson_saradc.c
> +++ b/drivers/iio/adc/meson_saradc.c
> @@ -221,6 +221,7 @@ enum meson_sar_adc_chan7_mux_sel {
>
> struct meson_sar_adc_data {
> bool has_bl30_integration;
> + u32 bandgap_reg;
> unsigned int resolution;
> const char *name;
> };
> @@ -685,6 +686,20 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
> return 0;
> }
>
> +static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
> +{
> + struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> + u32 enable_mask;
> +
> + if (priv->data->bandgap_reg == MESON_SAR_ADC_REG11)
> + enable_mask = MESON_SAR_ADC_REG11_BANDGAP_EN;
> + else
> + enable_mask = MESON_SAR_ADC_DELTA_10_TS_VBG_EN;
> +
> + regmap_update_bits(priv->regmap, priv->data->bandgap_reg, enable_mask,
> + on_off ? enable_mask : 0);
> +}
> +
> static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
> {
> struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> @@ -717,9 +732,9 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
> regval = FIELD_PREP(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, 1);
> regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
> MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval);
> - regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
> - MESON_SAR_ADC_REG11_BANDGAP_EN,
> - MESON_SAR_ADC_REG11_BANDGAP_EN);
> +
> + meson_sar_adc_set_bandgap(indio_dev, true);
> +
> regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
> MESON_SAR_ADC_REG3_ADC_EN,
> MESON_SAR_ADC_REG3_ADC_EN);
> @@ -739,8 +754,7 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
> err_adc_clk:
> regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
> MESON_SAR_ADC_REG3_ADC_EN, 0);
> - regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
> - MESON_SAR_ADC_REG11_BANDGAP_EN, 0);
> + meson_sar_adc_set_bandgap(indio_dev, false);
> clk_disable_unprepare(priv->sana_clk);
> err_sana_clk:
> clk_disable_unprepare(priv->core_clk);
> @@ -765,8 +779,8 @@ static int meson_sar_adc_hw_disable(struct iio_dev *indio_dev)
>
> regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
> MESON_SAR_ADC_REG3_ADC_EN, 0);
> - regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
> - MESON_SAR_ADC_REG11_BANDGAP_EN, 0);
> +
> + meson_sar_adc_set_bandgap(indio_dev, false);
>
> clk_disable_unprepare(priv->sana_clk);
> clk_disable_unprepare(priv->core_clk);
> @@ -845,30 +859,35 @@ static const struct iio_info meson_sar_adc_iio_info = {
>
> static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
> .has_bl30_integration = false,
> + .bandgap_reg = MESON_SAR_ADC_DELTA_10,
> .resolution = 10,
> .name = "meson-meson8-saradc",
> };
>
> static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
> .has_bl30_integration = false,
> + .bandgap_reg = MESON_SAR_ADC_DELTA_10,
> .resolution = 10,
> .name = "meson-meson8b-saradc",
> };
>
> static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
> .has_bl30_integration = true,
> + .bandgap_reg = MESON_SAR_ADC_REG11,
> .resolution = 10,
> .name = "meson-gxbb-saradc",
> };
>
> static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
> .has_bl30_integration = true,
> + .bandgap_reg = MESON_SAR_ADC_REG11,
> .resolution = 12,
> .name = "meson-gxl-saradc",
> };
>
> static const struct meson_sar_adc_data meson_sar_adc_gxm_data = {
> .has_bl30_integration = true,
> + .bandgap_reg = MESON_SAR_ADC_REG11,
> .resolution = 12,
> .name = "meson-gxm-saradc",
> };
next prev parent reply other threads:[~2017-11-19 15:44 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-31 20:01 [PATCH 0/5] meson_saradc fixes and minor improvements Martin Blumenstingl
2017-10-31 20:01 ` Martin Blumenstingl
2017-10-31 20:01 ` [PATCH 1/5] iio: adc: meson-saradc: fix the bit_idx of the adc_en clock Martin Blumenstingl
2017-10-31 20:01 ` Martin Blumenstingl
2017-11-19 15:43 ` Jonathan Cameron
2017-11-19 15:43 ` Jonathan Cameron
2017-10-31 20:01 ` [PATCH 2/5] iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs Martin Blumenstingl
2017-10-31 20:01 ` Martin Blumenstingl
2017-11-19 15:44 ` Jonathan Cameron [this message]
2017-11-19 15:44 ` Jonathan Cameron
2017-10-31 20:01 ` [PATCH 3/5] iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13 Martin Blumenstingl
2017-10-31 20:01 ` Martin Blumenstingl
2017-11-19 15:46 ` Jonathan Cameron
2017-11-19 15:46 ` Jonathan Cameron
2017-10-31 20:01 ` [PATCH 4/5] iio: adc: meson-saradc: fix the clock frequency on Meson8 and Meson8b Martin Blumenstingl
2017-10-31 20:01 ` Martin Blumenstingl
2017-11-19 15:55 ` Jonathan Cameron
2017-11-19 15:55 ` Jonathan Cameron
2017-12-10 19:47 ` Jonathan Cameron
2017-12-10 19:47 ` Jonathan Cameron
2017-10-31 20:01 ` [PATCH 5/5] iio: adc: meson-saradc: program the channel muxes during initialization Martin Blumenstingl
2017-10-31 20:01 ` Martin Blumenstingl
2017-11-19 15:57 ` Jonathan Cameron
2017-11-19 15:57 ` Jonathan Cameron
2017-12-10 19:49 ` Jonathan Cameron
2017-12-10 19:49 ` Jonathan Cameron
2017-11-02 15:05 ` [PATCH 0/5] meson_saradc fixes and minor improvements Jonathan Cameron
2017-11-02 15:05 ` Jonathan Cameron
2017-11-27 23:47 ` Kevin Hilman
2017-11-27 23:47 ` Kevin Hilman
2017-12-02 11:30 ` Jonathan Cameron
2017-12-02 11:30 ` Jonathan Cameron
2017-12-10 17:48 ` Martin Blumenstingl
2017-12-10 17:48 ` Martin Blumenstingl
2017-12-10 19:50 ` Jonathan Cameron
2017-12-10 19:50 ` Jonathan Cameron
2017-12-10 22:27 ` Martin Blumenstingl
2017-12-10 22:27 ` Martin Blumenstingl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171119154422.3716b00e@archlinux \
--to=jic23@kernel.org \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.