All of lore.kernel.org
 help / color / mirror / Atom feed
From: ar@linux.vnet.ibm.com (Andrea Reale)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/5] mm: memory_hotplug: Memory hotplug (add) support for arm64
Date: Fri, 24 Nov 2017 09:42:33 +0000	[thread overview]
Message-ID: <20171124094232.GA18120@samekh> (raw)
In-Reply-To: <CAKZGPAPN7migyvpNJDu1bA+ditb0TJV4WLqZuPdkxOU3kYQ9Ng@mail.gmail.com>

Hi Arun,


On Fri 24 Nov 2017, 11:25, Arun KS wrote:
> On Thu, Nov 23, 2017 at 4:43 PM, Maciej Bielski
> <m.bielski@virtualopensystems.com> wrote:
>> [ ...]
> > Introduces memory hotplug functionality (hot-add) for arm64.
> > @@ -615,6 +616,44 @@ void __init paging_init(void)
> >                       SWAPPER_DIR_SIZE - PAGE_SIZE);
> >  }
> >
> > +#ifdef CONFIG_MEMORY_HOTPLUG
> > +
> > +/*
> > + * hotplug_paging() is used by memory hotplug to build new page tables
> > + * for hot added memory.
> > + */
> > +
> > +struct mem_range {
> > +       phys_addr_t base;
> > +       phys_addr_t size;
> > +};
> > +
> > +static int __hotplug_paging(void *data)
> > +{
> > +       int flags = 0;
> > +       struct mem_range *section = data;
> > +
> > +       if (debug_pagealloc_enabled())
> > +               flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
> > +
> > +       __create_pgd_mapping(swapper_pg_dir, section->base,
> > +                       __phys_to_virt(section->base), section->size,
> > +                       PAGE_KERNEL, pgd_pgtable_alloc, flags);
> 
> Hello Andrea,
> 
> __hotplug_paging runs on stop_machine context.
> cpu stop callbacks must not sleep.
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/stop_machine.c?h=v4.14#n479
> 
> __create_pgd_mapping uses pgd_pgtable_alloc. which does
> __get_free_page(PGALLOC_GFP)
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/mm/mmu.c?h=v4.14#n342
> 
> PGALLOC_GFP has GFP_KERNEL which inturn has __GFP_RECLAIM
> 
> #define PGALLOC_GFP     (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
> #define GFP_KERNEL      (__GFP_RECLAIM | __GFP_IO | __GFP_FS)
> 
> Now, prepare_alloc_pages() called by __alloc_pages_nodemask checks for
> 
> might_sleep_if(gfp_mask & __GFP_DIRECT_RECLAIM);
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/mm/page_alloc.c?h=v4.14#n4150
> 
> and then BUG()

Well spotted, thanks for reporting the problem. One possible solution
would be to revert back to building the updated page tables on a copy
pgdir (as it was done in v1 of this patchset) and then replacing swapper
atomically with stop_machine.

Actually, I am not sure if stop_machine is strictly needed,
if we modify the swapper pgdir live: for example, in x86_64
kernel_physical_mapping_init, atomicity is ensured by spin-locking on
init_mm.page_table_lock.
https://elixir.free-electrons.com/linux/v4.14/source/arch/x86/mm/init_64.c#L684
I'll spend some time investigating whoever else could be working
concurrently on the swapper pgdir.

Any suggestion or pointer is very welcome.

Thanks,
Andrea

> I was testing on 4.4 kernel, but cross checked with 4.14 as well.
> 
> Regards,
> Arun
> 
> 
> > +
> > +       return 0;
> > +}
> > +
> > +inline void hotplug_paging(phys_addr_t start, phys_addr_t size)
> > +{
> > +       struct mem_range section = {
> > +               .base = start,
> > +               .size = size,
> > +       };
> > +
> > +       stop_machine(__hotplug_paging, &section, NULL);
> > +}
> > +#endif /* CONFIG_MEMORY_HOTPLUG */
> > +
> >  /*
> >   * Check whether a kernel address is valid (derived from arch/x86/).
> >   */
> > --
> > 2.7.4
> >
> 

WARNING: multiple messages have this Message-ID (diff)
From: Andrea Reale <ar@linux.vnet.ibm.com>
To: Arun KS <arunks.linux@gmail.com>
Cc: Maciej Bielski <m.bielski@virtualopensystems.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	linux-mm@kvack.org, arunks@qti.qualcomm.com,
	mark.rutland@arm.com, scott.branden@broadcom.com,
	will.deacon@arm.com, qiuxishi@huawei.com,
	Catalin Marinas <catalin.marinas@arm.com>,
	mhocko@suse.com, realean2@ie.ibm.com
Subject: Re: [PATCH v2 1/5] mm: memory_hotplug: Memory hotplug (add) support for arm64
Date: Fri, 24 Nov 2017 09:42:33 +0000	[thread overview]
Message-ID: <20171124094232.GA18120@samekh> (raw)
In-Reply-To: <CAKZGPAPN7migyvpNJDu1bA+ditb0TJV4WLqZuPdkxOU3kYQ9Ng@mail.gmail.com>

Hi Arun,


On Fri 24 Nov 2017, 11:25, Arun KS wrote:
> On Thu, Nov 23, 2017 at 4:43 PM, Maciej Bielski
> <m.bielski@virtualopensystems.com> wrote:
>> [ ...]
> > Introduces memory hotplug functionality (hot-add) for arm64.
> > @@ -615,6 +616,44 @@ void __init paging_init(void)
> >                       SWAPPER_DIR_SIZE - PAGE_SIZE);
> >  }
> >
> > +#ifdef CONFIG_MEMORY_HOTPLUG
> > +
> > +/*
> > + * hotplug_paging() is used by memory hotplug to build new page tables
> > + * for hot added memory.
> > + */
> > +
> > +struct mem_range {
> > +       phys_addr_t base;
> > +       phys_addr_t size;
> > +};
> > +
> > +static int __hotplug_paging(void *data)
> > +{
> > +       int flags = 0;
> > +       struct mem_range *section = data;
> > +
> > +       if (debug_pagealloc_enabled())
> > +               flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
> > +
> > +       __create_pgd_mapping(swapper_pg_dir, section->base,
> > +                       __phys_to_virt(section->base), section->size,
> > +                       PAGE_KERNEL, pgd_pgtable_alloc, flags);
> 
> Hello Andrea,
> 
> __hotplug_paging runs on stop_machine context.
> cpu stop callbacks must not sleep.
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/stop_machine.c?h=v4.14#n479
> 
> __create_pgd_mapping uses pgd_pgtable_alloc. which does
> __get_free_page(PGALLOC_GFP)
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/mm/mmu.c?h=v4.14#n342
> 
> PGALLOC_GFP has GFP_KERNEL which inturn has __GFP_RECLAIM
> 
> #define PGALLOC_GFP     (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
> #define GFP_KERNEL      (__GFP_RECLAIM | __GFP_IO | __GFP_FS)
> 
> Now, prepare_alloc_pages() called by __alloc_pages_nodemask checks for
> 
> might_sleep_if(gfp_mask & __GFP_DIRECT_RECLAIM);
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/mm/page_alloc.c?h=v4.14#n4150
> 
> and then BUG()

Well spotted, thanks for reporting the problem. One possible solution
would be to revert back to building the updated page tables on a copy
pgdir (as it was done in v1 of this patchset) and then replacing swapper
atomically with stop_machine.

Actually, I am not sure if stop_machine is strictly needed,
if we modify the swapper pgdir live: for example, in x86_64
kernel_physical_mapping_init, atomicity is ensured by spin-locking on
init_mm.page_table_lock.
https://elixir.free-electrons.com/linux/v4.14/source/arch/x86/mm/init_64.c#L684
I'll spend some time investigating whoever else could be working
concurrently on the swapper pgdir.

Any suggestion or pointer is very welcome.

Thanks,
Andrea

> I was testing on 4.4 kernel, but cross checked with 4.14 as well.
> 
> Regards,
> Arun
> 
> 
> > +
> > +       return 0;
> > +}
> > +
> > +inline void hotplug_paging(phys_addr_t start, phys_addr_t size)
> > +{
> > +       struct mem_range section = {
> > +               .base = start,
> > +               .size = size,
> > +       };
> > +
> > +       stop_machine(__hotplug_paging, &section, NULL);
> > +}
> > +#endif /* CONFIG_MEMORY_HOTPLUG */
> > +
> >  /*
> >   * Check whether a kernel address is valid (derived from arch/x86/).
> >   */
> > --
> > 2.7.4
> >
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

WARNING: multiple messages have this Message-ID (diff)
From: Andrea Reale <ar@linux.vnet.ibm.com>
To: Arun KS <arunks.linux@gmail.com>
Cc: Maciej Bielski <m.bielski@virtualopensystems.com>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	linux-mm@kvack.org, arunks@qti.qualcomm.com,
	mark.rutland@arm.com, scott.branden@broadcom.com,
	will.deacon@arm.com, qiuxishi@huawei.com,
	Catalin Marinas <catalin.marinas@arm.com>,
	mhocko@suse.com, realean2@ie.ibm.com
Subject: Re: [PATCH v2 1/5] mm: memory_hotplug: Memory hotplug (add) support for arm64
Date: Fri, 24 Nov 2017 09:42:33 +0000	[thread overview]
Message-ID: <20171124094232.GA18120@samekh> (raw)
In-Reply-To: <CAKZGPAPN7migyvpNJDu1bA+ditb0TJV4WLqZuPdkxOU3kYQ9Ng@mail.gmail.com>

Hi Arun,


On Fri 24 Nov 2017, 11:25, Arun KS wrote:
> On Thu, Nov 23, 2017 at 4:43 PM, Maciej Bielski
> <m.bielski@virtualopensystems.com> wrote:
>> [ ...]
> > Introduces memory hotplug functionality (hot-add) for arm64.
> > @@ -615,6 +616,44 @@ void __init paging_init(void)
> >                       SWAPPER_DIR_SIZE - PAGE_SIZE);
> >  }
> >
> > +#ifdef CONFIG_MEMORY_HOTPLUG
> > +
> > +/*
> > + * hotplug_paging() is used by memory hotplug to build new page tables
> > + * for hot added memory.
> > + */
> > +
> > +struct mem_range {
> > +       phys_addr_t base;
> > +       phys_addr_t size;
> > +};
> > +
> > +static int __hotplug_paging(void *data)
> > +{
> > +       int flags = 0;
> > +       struct mem_range *section = data;
> > +
> > +       if (debug_pagealloc_enabled())
> > +               flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
> > +
> > +       __create_pgd_mapping(swapper_pg_dir, section->base,
> > +                       __phys_to_virt(section->base), section->size,
> > +                       PAGE_KERNEL, pgd_pgtable_alloc, flags);
> 
> Hello Andrea,
> 
> __hotplug_paging runs on stop_machine context.
> cpu stop callbacks must not sleep.
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/stop_machine.c?h=v4.14#n479
> 
> __create_pgd_mapping uses pgd_pgtable_alloc. which does
> __get_free_page(PGALLOC_GFP)
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/mm/mmu.c?h=v4.14#n342
> 
> PGALLOC_GFP has GFP_KERNEL which inturn has __GFP_RECLAIM
> 
> #define PGALLOC_GFP     (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
> #define GFP_KERNEL      (__GFP_RECLAIM | __GFP_IO | __GFP_FS)
> 
> Now, prepare_alloc_pages() called by __alloc_pages_nodemask checks for
> 
> might_sleep_if(gfp_mask & __GFP_DIRECT_RECLAIM);
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/mm/page_alloc.c?h=v4.14#n4150
> 
> and then BUG()

Well spotted, thanks for reporting the problem. One possible solution
would be to revert back to building the updated page tables on a copy
pgdir (as it was done in v1 of this patchset) and then replacing swapper
atomically with stop_machine.

Actually, I am not sure if stop_machine is strictly needed,
if we modify the swapper pgdir live: for example, in x86_64
kernel_physical_mapping_init, atomicity is ensured by spin-locking on
init_mm.page_table_lock.
https://elixir.free-electrons.com/linux/v4.14/source/arch/x86/mm/init_64.c#L684
I'll spend some time investigating whoever else could be working
concurrently on the swapper pgdir.

Any suggestion or pointer is very welcome.

Thanks,
Andrea

> I was testing on 4.4 kernel, but cross checked with 4.14 as well.
> 
> Regards,
> Arun
> 
> 
> > +
> > +       return 0;
> > +}
> > +
> > +inline void hotplug_paging(phys_addr_t start, phys_addr_t size)
> > +{
> > +       struct mem_range section = {
> > +               .base = start,
> > +               .size = size,
> > +       };
> > +
> > +       stop_machine(__hotplug_paging, &section, NULL);
> > +}
> > +#endif /* CONFIG_MEMORY_HOTPLUG */
> > +
> >  /*
> >   * Check whether a kernel address is valid (derived from arch/x86/).
> >   */
> > --
> > 2.7.4
> >
> 

  reply	other threads:[~2017-11-24  9:42 UTC|newest]

Thread overview: 148+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-23 11:13 [PATCH v2 0/5] Memory hotplug support for arm64 - complete patchset v2 Andrea Reale
2017-11-23 11:13 ` Andrea Reale
2017-11-23 11:13 ` Andrea Reale
2017-11-23 11:13 ` [PATCH v2 1/5] mm: memory_hotplug: Memory hotplug (add) support for arm64 Maciej Bielski
2017-11-23 11:13   ` Maciej Bielski
2017-11-23 11:13   ` Maciej Bielski
2017-11-24  5:55   ` Arun KS
2017-11-24  5:55     ` Arun KS
2017-11-24  5:55     ` Arun KS
2017-11-24  9:42     ` Andrea Reale [this message]
2017-11-24  9:42       ` Andrea Reale
2017-11-24  9:42       ` Andrea Reale
2017-11-24 10:53       ` Maciej Bielski
2017-11-24 10:53         ` Maciej Bielski
2017-11-24 10:53         ` Maciej Bielski
2017-11-26  6:58         ` Arun KS
2017-11-26  6:58           ` Arun KS
2017-11-26  6:58           ` Arun KS
2017-11-27 15:19   ` Robin Murphy
2017-11-27 15:19     ` Robin Murphy
2017-11-27 15:19     ` Robin Murphy
2017-11-27 16:39     ` Maciej Bielski
2017-11-27 16:39       ` Maciej Bielski
2017-11-27 16:39       ` Maciej Bielski
2017-11-27 17:11       ` Andrea Reale
2017-11-27 17:11         ` Andrea Reale
2017-11-27 17:11         ` Andrea Reale
2017-11-23 11:14 ` [PATCH v2 2/5] mm: memory_hotplug: Remove assumption on memory state before hotremove Andrea Reale
2017-11-23 11:14   ` Andrea Reale
2017-11-23 11:14   ` Andrea Reale
2017-11-23 22:18   ` Rafael J. Wysocki
2017-11-23 22:18     ` Rafael J. Wysocki
2017-11-23 22:18     ` Rafael J. Wysocki
2017-11-24 14:39   ` Rafael J. Wysocki
2017-11-24 14:39     ` Rafael J. Wysocki
2017-11-24 14:39     ` Rafael J. Wysocki
2017-11-24 14:49     ` Andrea Reale
2017-11-24 14:49       ` Andrea Reale
2017-11-24 14:49       ` Andrea Reale
2017-11-24 15:43       ` Michal Hocko
2017-11-24 15:43         ` Michal Hocko
2017-11-24 15:43         ` Michal Hocko
2017-11-24 15:54         ` Andrea Reale
2017-11-24 15:54           ` Andrea Reale
2017-11-24 15:54           ` Andrea Reale
2017-11-24 18:17           ` Michal Hocko
2017-11-24 18:17             ` Michal Hocko
2017-11-24 18:17             ` Michal Hocko
2017-11-29  1:20             ` joeyli
2017-11-29  1:20               ` joeyli
2017-11-29  1:20               ` joeyli
2017-11-30  9:47               ` Michal Hocko
2017-11-30  9:47                 ` Michal Hocko
2017-11-30  9:47                 ` Michal Hocko
2017-11-27 15:20           ` Robin Murphy
2017-11-27 15:20             ` Robin Murphy
2017-11-27 15:20             ` Robin Murphy
2017-11-27 17:44             ` Andrea Reale
2017-11-27 17:44               ` Andrea Reale
2017-11-27 17:44               ` Andrea Reale
2017-11-29  0:49   ` joeyli
2017-11-29  0:49     ` joeyli
2017-11-29  0:49     ` joeyli
2017-11-29  1:52     ` joeyli
2017-11-29  1:52       ` joeyli
2017-11-29  1:52       ` joeyli
2017-12-04 11:28       ` Andrea Reale
2017-12-04 11:28         ` Andrea Reale
2017-12-04 11:28         ` Andrea Reale
2017-12-04 14:05         ` Rafael J. Wysocki
2017-12-04 14:05           ` Rafael J. Wysocki
2017-12-04 14:05           ` Rafael J. Wysocki
2017-11-23 11:14 ` [PATCH v2 3/5] mm: memory_hotplug: memblock to track partially removed vmemmap mem Andrea Reale
2017-11-23 11:14   ` Andrea Reale
2017-11-23 11:14   ` Andrea Reale
2017-11-27 15:20   ` Robin Murphy
2017-11-27 15:20     ` Robin Murphy
2017-11-27 15:20     ` Robin Murphy
2017-11-27 17:38     ` Andrea Reale
2017-11-27 17:38       ` Andrea Reale
2017-11-27 17:38       ` Andrea Reale
2017-11-30 14:51   ` Michal Hocko
2017-11-30 14:51     ` Michal Hocko
2017-11-30 14:51     ` Michal Hocko
2017-12-04 11:49     ` Andrea Reale
2017-12-04 11:49       ` Andrea Reale
2017-12-04 11:49       ` Andrea Reale
2017-12-04 12:32       ` Michal Hocko
2017-12-04 12:32         ` Michal Hocko
2017-12-04 12:32         ` Michal Hocko
2017-12-04 12:42         ` Andrea Reale
2017-12-04 12:42           ` Andrea Reale
2017-12-04 12:42           ` Andrea Reale
2017-12-04 12:48           ` Michal Hocko
2017-12-04 12:48             ` Michal Hocko
2017-12-04 12:48             ` Michal Hocko
2017-11-23 11:14 ` [PATCH v2 4/5] mm: memory_hotplug: Add memory hotremove probe device Andrea Reale
2017-11-23 11:14   ` Andrea Reale
2017-11-23 11:14   ` Andrea Reale
2017-11-24 10:35   ` zhong jiang
2017-11-24 10:35     ` zhong jiang
2017-11-24 10:35     ` zhong jiang
2017-11-24 10:44     ` Andrea Reale
2017-11-24 10:44       ` Andrea Reale
2017-11-24 10:44       ` Andrea Reale
2017-11-24 12:17       ` zhong jiang
2017-11-24 12:17         ` zhong jiang
2017-11-24 12:17         ` zhong jiang
2017-11-24 14:29         ` Andrea Reale
2017-11-24 14:29           ` Andrea Reale
2017-11-24 14:29           ` Andrea Reale
2017-12-04 17:50           ` Reza Arbab
2017-12-04 17:50             ` Reza Arbab
2017-12-04 17:50             ` Reza Arbab
2017-11-27 15:33   ` Robin Murphy
2017-11-27 15:33     ` Robin Murphy
2017-11-27 15:33     ` Robin Murphy
2017-11-27 17:14     ` Andrea Reale
2017-11-27 17:14       ` Andrea Reale
2017-11-27 17:14       ` Andrea Reale
2017-11-30 14:49   ` Michal Hocko
2017-11-30 14:49     ` Michal Hocko
2017-11-30 14:49     ` Michal Hocko
2017-12-04 11:51     ` Andrea Reale
2017-12-04 11:51       ` Andrea Reale
2017-12-04 11:51       ` Andrea Reale
2017-12-04 12:33       ` Michal Hocko
2017-12-04 12:33         ` Michal Hocko
2017-12-04 12:33         ` Michal Hocko
2017-12-04 12:44         ` Andrea Reale
2017-12-04 12:44           ` Andrea Reale
2017-12-04 12:44           ` Andrea Reale
2017-11-23 11:15 ` [PATCH v2 5/5] mm: memory-hotplug: Add memory hot remove support for arm64 Andrea Reale
2017-11-23 11:15   ` Andrea Reale
2017-11-23 11:15   ` Andrea Reale
2017-11-23 16:02 ` [PATCH v2 0/5] Memory hotplug support for arm64 - complete patchset v2 Michal Hocko
2017-11-23 16:02   ` Michal Hocko
2017-11-23 16:02   ` Michal Hocko
2017-11-23 17:33   ` Andrea Reale
2017-11-23 17:33     ` Andrea Reale
2017-11-23 17:33     ` Andrea Reale
2017-11-30 14:57     ` Michal Hocko
2017-11-30 14:57       ` Michal Hocko
2017-11-30 14:57       ` Michal Hocko
2017-12-04 11:34       ` Andrea Reale
2017-12-04 11:34         ` Andrea Reale
2017-12-04 11:34         ` Andrea Reale
2017-11-24 10:22 ` [PATCH v2 2/5] mm: memory_hotplug: Remove assumption on memory state before hotremove Andrea Reale

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171124094232.GA18120@samekh \
    --to=ar@linux.vnet.ibm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.