All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Andrew F. Davis" <afd-l0cyMroinI0@public.gmane.org>
To: "Liam Girdwood"
	<lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	"Mark Brown" <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	"Benoît Cousson"
	<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
	"Shawn Guo" <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"Sascha Hauer" <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"Andrew F . Davis" <afd-l0cyMroinI0@public.gmane.org>
Subject: [PATCH v2 8/8] ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
Date: Wed, 29 Nov 2017 11:13:59 -0600	[thread overview]
Message-ID: <20171129171359.29382-9-afd@ti.com> (raw)
In-Reply-To: <20171129171359.29382-1-afd-l0cyMroinI0@public.gmane.org>

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.

Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support")

Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/omap3-n900.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 669c51c00c00..5362139d5312 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -558,7 +558,7 @@
 	tlv320aic3x: tlv320aic3x@18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 		ai3x-gpio-func = <
 			0 /* AIC3X_GPIO1_FUNC_DISABLED */
 			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
@@ -575,7 +575,7 @@
 	tlv320aic3x_aux: tlv320aic3x@19 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x19>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 
 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;
-- 
2.15.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: "Andrew F. Davis" <afd@ti.com>
To: "Liam Girdwood" <lgirdwood@gmail.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <kernel@pengutronix.de>
Cc: <alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, "Andrew F . Davis" <afd@ti.com>
Subject: [PATCH v2 8/8] ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
Date: Wed, 29 Nov 2017 11:13:59 -0600	[thread overview]
Message-ID: <20171129171359.29382-9-afd@ti.com> (raw)
In-Reply-To: <20171129171359.29382-1-afd@ti.com>

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.

Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support")

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 arch/arm/boot/dts/omap3-n900.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 669c51c00c00..5362139d5312 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -558,7 +558,7 @@
 	tlv320aic3x: tlv320aic3x@18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 		ai3x-gpio-func = <
 			0 /* AIC3X_GPIO1_FUNC_DISABLED */
 			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
@@ -575,7 +575,7 @@
 	tlv320aic3x_aux: tlv320aic3x@19 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x19>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 
 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;
-- 
2.15.0

  parent reply	other threads:[~2017-11-29 17:13 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-29 17:13 [PATCH v2 0/8] Remove use of "gpio-reset" from DT Andrew F. Davis
2017-11-29 17:13 ` Andrew F. Davis
2017-11-29 17:13 ` [PATCH v2 3/8] ASoC: tlv320aic31xx: Fix the reset GPIO OF name Andrew F. Davis
2017-11-29 17:13   ` Andrew F. Davis
2017-11-30 12:33   ` Applied "ASoC: tlv320aic31xx: Use standard reset GPIO OF name" to the asoc tree Mark Brown
2017-11-29 17:13 ` [PATCH v2 4/8] ASoC: tlv320aic3x: Fix the reset GPIO OF name Andrew F. Davis
2017-11-29 17:13   ` Andrew F. Davis
2017-11-30 12:33   ` Applied "ASoC: tlv320aic3x: Use standard reset GPIO OF name" to the asoc tree Mark Brown
2017-11-29 17:13 ` [PATCH v2 5/8] ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin Andrew F. Davis
2017-11-29 17:13   ` Andrew F. Davis
2017-11-30 16:18   ` Tony Lindgren
     [not found]     ` <20171130161826.GP28152-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-11-30 16:33       ` Mark Brown
2017-11-30 16:33         ` Mark Brown
2017-11-30 16:37         ` Andrew F. Davis
2017-11-30 16:37           ` Andrew F. Davis
2017-11-30 16:53           ` Mark Brown
2017-11-30 16:53             ` Mark Brown
2017-11-30 17:00             ` Tony Lindgren
2017-11-29 17:13 ` [PATCH v2 6/8] ARM: dts: imx6: RDU2: " Andrew F. Davis
2017-11-29 17:13   ` Andrew F. Davis
2017-11-29 17:13 ` [PATCH v2 7/8] ARM: dts: imx: " Andrew F. Davis
2017-11-29 17:13   ` Andrew F. Davis
     [not found] ` <20171129171359.29382-1-afd-l0cyMroinI0@public.gmane.org>
2017-11-29 17:13   ` [PATCH v2 1/8] ASoC: tlv320aic31xx: Fix typo in DT binding documentation Andrew F. Davis
2017-11-29 17:13     ` Andrew F. Davis
     [not found]     ` <20171129171359.29382-2-afd-l0cyMroinI0@public.gmane.org>
2017-11-30 11:43       ` Mark Brown
2017-11-30 11:43         ` Mark Brown
2017-11-30 12:33     ` Applied "ASoC: tlv320aic31xx: Rename property for reset GPIO" to the asoc tree Mark Brown
2017-11-29 17:13   ` [PATCH v2 2/8] ASoC: tlv320aic3x: Fix typo in DT binding documentation Andrew F. Davis
2017-11-29 17:13     ` Andrew F. Davis
2017-11-30 12:33     ` Applied "ASoC: tlv320aic3x: Rename property for reset GPIO" to the asoc tree Mark Brown
2017-11-29 17:13   ` Andrew F. Davis [this message]
2017-11-29 17:13     ` [PATCH v2 8/8] ARM: dts: omap3-n900: Fix the audio CODEC's reset pin Andrew F. Davis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171129171359.29382-9-afd@ti.com \
    --to=afd-l0cymroini0@public.gmane.org \
    --cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
    --cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.