From: sboyd@codeaurora.org (Stephen Boyd)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v3 3/3] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Date: Wed, 29 Nov 2017 11:35:36 -0800 [thread overview]
Message-ID: <20171129193536.GB19419@codeaurora.org> (raw)
In-Reply-To: <20171128125330.363-4-yixun.lan@amlogic.com>
On 11/28, Yixun Lan wrote:
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b932a784b02a..36a2e98338a8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -7,6 +7,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/axg-clkc.h>
>
> / {
> compatible = "amlogic,meson-axg";
> @@ -148,6 +149,20 @@
> #address-cells = <0>;
> };
>
> + hiubus: hiubus at ff63c000 {
Maybe just call the node "bus at ff63c000"?
> + compatible = "simple-bus";
> + reg = <0x0 0xff63c000 0x0 0x1c00>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
> +
> + clkc: clock-controller at 0 {
> + compatible = "amlogic,axg-clkc";
> + #clock-cells = <1>;
> + reg = <0x0 0x0 0x0 0x320>;
> + };
> + };
> +
> mailbox: mailbox at ff63dc00 {
> compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
> reg = <0 0xff63dc00 0 0x400>;
> --
> 2.15.0
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Boyd <sboyd@codeaurora.org>
To: Yixun Lan <yixun.lan@amlogic.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Michael Turquette <mturquette@baylibre.com>,
Carlo Caione <carlo@caione.org>,
Qiufang Dai <qiufang.dai@amlogic.com>,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 3/3] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Date: Wed, 29 Nov 2017 11:35:36 -0800 [thread overview]
Message-ID: <20171129193536.GB19419@codeaurora.org> (raw)
In-Reply-To: <20171128125330.363-4-yixun.lan@amlogic.com>
On 11/28, Yixun Lan wrote:
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b932a784b02a..36a2e98338a8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -7,6 +7,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/axg-clkc.h>
>
> / {
> compatible = "amlogic,meson-axg";
> @@ -148,6 +149,20 @@
> #address-cells = <0>;
> };
>
> + hiubus: hiubus@ff63c000 {
Maybe just call the node "bus@ff63c000"?
> + compatible = "simple-bus";
> + reg = <0x0 0xff63c000 0x0 0x1c00>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
> +
> + clkc: clock-controller@0 {
> + compatible = "amlogic,axg-clkc";
> + #clock-cells = <1>;
> + reg = <0x0 0x0 0x0 0x320>;
> + };
> + };
> +
> mailbox: mailbox@ff63dc00 {
> compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
> reg = <0 0xff63dc00 0 0x400>;
> --
> 2.15.0
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/3] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Date: Wed, 29 Nov 2017 11:35:36 -0800 [thread overview]
Message-ID: <20171129193536.GB19419@codeaurora.org> (raw)
In-Reply-To: <20171128125330.363-4-yixun.lan@amlogic.com>
On 11/28, Yixun Lan wrote:
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b932a784b02a..36a2e98338a8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -7,6 +7,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/axg-clkc.h>
>
> / {
> compatible = "amlogic,meson-axg";
> @@ -148,6 +149,20 @@
> #address-cells = <0>;
> };
>
> + hiubus: hiubus at ff63c000 {
Maybe just call the node "bus at ff63c000"?
> + compatible = "simple-bus";
> + reg = <0x0 0xff63c000 0x0 0x1c00>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
> +
> + clkc: clock-controller at 0 {
> + compatible = "amlogic,axg-clkc";
> + #clock-cells = <1>;
> + reg = <0x0 0x0 0x0 0x320>;
> + };
> + };
> +
> mailbox: mailbox at ff63dc00 {
> compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
> reg = <0 0xff63dc00 0 0x400>;
> --
> 2.15.0
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2017-11-29 19:35 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-28 12:53 [PATCH v3 0/3] add clk controller driver for Meson-AXG SoC Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 12:53 ` [PATCH v3 1/3] dt-bindings: clock: add compatible variant for the Meson-AXG Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 15:29 ` Rob Herring
2017-11-28 15:29 ` Rob Herring
2017-11-28 15:29 ` Rob Herring
2017-11-28 12:53 ` [PATCH v3 2/3] clk: meson-axg: add clock controller drivers Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 16:30 ` Rob Herring
2017-11-28 16:30 ` Rob Herring
2017-11-28 16:30 ` Rob Herring
2017-11-28 16:30 ` Rob Herring
2017-11-28 23:16 ` Yixun Lan
2017-11-28 23:16 ` Yixun Lan
2017-11-28 23:16 ` Yixun Lan
2017-11-28 23:16 ` Yixun Lan
2017-11-29 19:34 ` Stephen Boyd
2017-11-29 19:34 ` Stephen Boyd
2017-11-29 19:34 ` Stephen Boyd
2017-11-30 6:01 ` Yixun Lan
2017-11-30 6:01 ` Yixun Lan
2017-11-30 6:01 ` Yixun Lan
2017-11-30 6:01 ` Yixun Lan
2017-12-01 16:39 ` Stephen Boyd
2017-12-01 16:39 ` Stephen Boyd
2017-12-01 16:39 ` Stephen Boyd
2017-12-01 16:39 ` Stephen Boyd
2017-11-28 12:53 ` [PATCH v3 3/3] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-28 12:53 ` Yixun Lan
2017-11-29 19:35 ` Stephen Boyd [this message]
2017-11-29 19:35 ` Stephen Boyd
2017-11-29 19:35 ` Stephen Boyd
2017-11-30 6:01 ` Yixun Lan
2017-11-30 6:01 ` Yixun Lan
2017-11-30 6:01 ` Yixun Lan
2017-11-30 6:01 ` Yixun Lan
2017-12-01 16:34 ` Stephen Boyd
2017-12-01 16:34 ` Stephen Boyd
2017-12-01 16:34 ` Stephen Boyd
2017-12-01 16:59 ` Jerome Brunet
2017-12-01 16:59 ` Jerome Brunet
2017-12-01 16:59 ` Jerome Brunet
2017-12-06 1:00 ` Stephen Boyd
2017-12-06 1:00 ` Stephen Boyd
2017-12-06 1:00 ` Stephen Boyd
2017-12-06 19:11 ` Kevin Hilman
2017-12-06 19:11 ` Kevin Hilman
2017-12-06 19:11 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171129193536.GB19419@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.