From: tyler@opensourcefoundries.com (tyler at opensourcefoundries.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/8] ARM: dts: imx7d-sbc-iot: enable PCIe peripheral
Date: Thu, 30 Nov 2017 12:14:32 -0800 [thread overview]
Message-ID: <20171130201434.14122-7-tyler@opensourcefoundries.com> (raw)
In-Reply-To: <20171130201434.14122-1-tyler@opensourcefoundries.com>
From: Tyler Baker <tyler@opensourcefoundries.com>
Add a PCIe device tree node to enable PCIe support.
Signed-off-by: Tyler Baker <tyler@opensourcefoundries.com>
---
arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
index 50dfdd3..7b21366 100644
--- a/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
@@ -127,6 +127,12 @@
>;
};
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x34 /* PCIe RST */
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX7D_PAD_LCD_ENABLE__UART2_DCE_TX 0x79 /* P7-12 */
@@ -201,6 +207,14 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+ phy-ref-clk = <1>;
+ status = "okay";
+};
+
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: tyler@opensourcefoundries.com
To: shawnguo@kernel.org, fabio.estevam@nxp.com, kernel@pengutronix.de
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Tyler Baker <tyler@opensourcefoundries.com>
Subject: [PATCH 6/8] ARM: dts: imx7d-sbc-iot: enable PCIe peripheral
Date: Thu, 30 Nov 2017 12:14:32 -0800 [thread overview]
Message-ID: <20171130201434.14122-7-tyler@opensourcefoundries.com> (raw)
In-Reply-To: <20171130201434.14122-1-tyler@opensourcefoundries.com>
From: Tyler Baker <tyler@opensourcefoundries.com>
Add a PCIe device tree node to enable PCIe support.
Signed-off-by: Tyler Baker <tyler@opensourcefoundries.com>
---
arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
index 50dfdd3..7b21366 100644
--- a/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
@@ -127,6 +127,12 @@
>;
};
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x34 /* PCIe RST */
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX7D_PAD_LCD_ENABLE__UART2_DCE_TX 0x79 /* P7-12 */
@@ -201,6 +207,14 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+ phy-ref-clk = <1>;
+ status = "okay";
+};
+
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
--
2.9.3
next prev parent reply other threads:[~2017-11-30 20:14 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-30 20:14 [PATCH 0/8] ARM: dts: introduce Compulab IoT Gateway tyler at opensourcefoundries.com
2017-11-30 20:14 ` tyler
2017-11-30 20:14 ` [PATCH 1/8] ARM: dts: imx7d-sbc-iot: add initial iot gateway dts tyler at opensourcefoundries.com
2017-11-30 20:14 ` tyler
2017-11-30 20:14 ` tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf
2017-12-01 20:10 ` Fabio Estevam
2017-12-01 20:10 ` Fabio Estevam
2017-12-01 20:10 ` Fabio Estevam
2017-12-05 20:58 ` Tyler Baker
2017-12-05 20:58 ` Tyler Baker
2017-12-05 20:58 ` Tyler Baker
2017-11-30 20:14 ` [PATCH 2/8] ARM: dts: imx7: build imx7d-sbc-iot-imx7 dtb tyler at opensourcefoundries.com
2017-11-30 20:14 ` tyler
2017-12-01 20:11 ` Fabio Estevam
2017-12-01 20:11 ` Fabio Estevam
2017-12-05 20:58 ` Tyler Baker
2017-12-05 20:58 ` Tyler Baker
2017-11-30 20:14 ` [PATCH 3/8] ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2 tyler at opensourcefoundries.com
2017-11-30 20:14 ` tyler
2017-12-01 20:13 ` Fabio Estevam
2017-12-01 20:13 ` Fabio Estevam
2017-12-05 20:59 ` Tyler Baker
2017-12-05 20:59 ` Tyler Baker
2017-11-30 20:14 ` [PATCH 4/8] ARM: dts: imx7s: add dma support tyler at opensourcefoundries.com
2017-11-30 20:14 ` tyler
2017-11-30 20:14 ` tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf
2017-12-01 20:17 ` Fabio Estevam
2017-12-01 20:17 ` Fabio Estevam
2017-12-01 20:17 ` Fabio Estevam
2017-12-05 20:59 ` Tyler Baker
2017-12-05 20:59 ` Tyler Baker
2017-11-30 20:14 ` [PATCH 5/8] ARM: dts: imx7s: add node and supplies for vdd1p2 tyler at opensourcefoundries.com
2017-11-30 20:14 ` tyler
2017-11-30 20:14 ` tyler at opensourcefoundries.com [this message]
2017-11-30 20:14 ` [PATCH 6/8] ARM: dts: imx7d-sbc-iot: enable PCIe peripheral tyler
2017-11-30 20:14 ` [PATCH 7/8] ARM: dts: imx7s: add usb hsic phy domain tyler at opensourcefoundries.com
2017-11-30 20:14 ` tyler
2017-11-30 20:14 ` tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf
2017-11-30 20:14 ` [PATCH 8/8] PCIe: imx6: imx7d: add support for phy refclk source tyler at opensourcefoundries.com
2017-11-30 20:14 ` tyler
2017-12-01 20:21 ` Fabio Estevam
2017-12-01 20:21 ` Fabio Estevam
2017-12-01 20:21 ` Fabio Estevam
2017-12-05 20:58 ` Tyler Baker
2017-12-05 20:58 ` Tyler Baker
2017-12-05 20:58 ` Tyler Baker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171130201434.14122-7-tyler@opensourcefoundries.com \
--to=tyler@opensourcefoundries.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.