From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, jsnow@redhat.com, famz@redhat.com,
qemu-block@nongnu.org, vsementsov@virtuozzo.com,
Ronnie Sahlberg <ronniesahlberg@gmail.com>,
Paolo Bonzini <pbonzini@redhat.com>, Peter Lieven <pl@kamp.de>,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v5 07/20] iscsi: Switch to .bdrv_co_block_status()
Date: Thu, 30 Nov 2017 19:42:29 -0600 [thread overview]
Message-ID: <20171201014242.16877-8-eblake@redhat.com> (raw)
In-Reply-To: <20171201014242.16877-1-eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the iscsi driver accordingly. In this case,
it is handy to teach iscsi_co_block_status() to handle a NULL map
and file parameter, even though the block layer passes non-NULL
values, because we also call the function directly. For now, there
are no optimizations done based on the want_zero flag.
We can also make the simplification of asserting that the block
layer passed in aligned values.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
v5: assert rather than check for alignment
v4: rebase to interface tweaks
v3: no change
v2: rebase to mapping parameter
---
block/iscsi.c | 67 ++++++++++++++++++++++++++++-------------------------------
1 file changed, 32 insertions(+), 35 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index 4896d50d6e..4c35403e27 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -647,28 +647,28 @@ out_unlock:
-static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
- BlockDriverState **file)
+static int coroutine_fn iscsi_co_block_status(BlockDriverState *bs,
+ bool want_zero, int64_t offset,
+ int64_t bytes, int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
IscsiLun *iscsilun = bs->opaque;
struct scsi_get_lba_status *lbas = NULL;
struct scsi_lba_status_descriptor *lbasd = NULL;
struct IscsiTask iTask;
- int64_t ret;
+ int ret;
iscsi_co_init_iscsitask(iscsilun, &iTask);
- if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
- ret = -EINVAL;
- goto out;
- }
+ assert(QEMU_IS_ALIGNED(offset | bytes, iscsilun->block_size));
/* default to all sectors allocated */
- ret = BDRV_BLOCK_DATA;
- ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
- *pnum = nb_sectors;
+ ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+ if (map) {
+ *map = offset;
+ }
+ *pnum = bytes;
/* LUN does not support logical block provisioning */
if (!iscsilun->lbpme) {
@@ -678,7 +678,7 @@ static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
qemu_mutex_lock(&iscsilun->mutex);
retry:
if (iscsi_get_lba_status_task(iscsilun->iscsi, iscsilun->lun,
- sector_qemu2lun(sector_num, iscsilun),
+ offset / iscsilun->block_size,
8 + 16, iscsi_co_generic_cb,
&iTask) == NULL) {
ret = -ENOMEM;
@@ -717,12 +717,12 @@ retry:
lbasd = &lbas->descriptors[0];
- if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
+ if (offset / iscsilun->block_size != lbasd->lba) {
ret = -EIO;
goto out_unlock;
}
- *pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
+ *pnum = lbasd->num_blocks * iscsilun->block_size;
if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
@@ -733,15 +733,13 @@ retry:
}
if (ret & BDRV_BLOCK_ZERO) {
- iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_unallocated(iscsilun, offset, *pnum);
} else {
- iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_allocated(iscsilun, offset, *pnum);
}
- if (*pnum > nb_sectors) {
- *pnum = nb_sectors;
+ if (*pnum > bytes) {
+ *pnum = bytes;
}
out_unlock:
qemu_mutex_unlock(&iscsilun->mutex);
@@ -749,7 +747,7 @@ out:
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
}
- if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
+ if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID && file) {
*file = bs;
}
return ret;
@@ -788,25 +786,24 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
nb_sectors * BDRV_SECTOR_SIZE) &&
!iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
nb_sectors * BDRV_SECTOR_SIZE)) {
- int pnum;
- BlockDriverState *file;
+ int64_t pnum;
/* check the block status from the beginning of the cluster
* containing the start sector */
- int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
- int head;
- int64_t ret;
+ int64_t head;
+ int ret;
- assert(cluster_sectors);
- head = sector_num % cluster_sectors;
- ret = iscsi_co_get_block_status(bs, sector_num - head,
- BDRV_REQUEST_MAX_SECTORS, &pnum,
- &file);
+ assert(iscsilun->cluster_size);
+ head = (sector_num * BDRV_SECTOR_SIZE) % iscsilun->cluster_size;
+ ret = iscsi_co_block_status(bs, false,
+ sector_num * BDRV_SECTOR_SIZE - head,
+ BDRV_REQUEST_MAX_BYTES, &pnum, NULL, NULL);
if (ret < 0) {
return ret;
}
/* if the whole request falls into an unallocated area we can avoid
* reading and directly return zeroes instead */
- if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
+ if (ret & BDRV_BLOCK_ZERO &&
+ pnum >= nb_sectors * BDRV_SECTOR_SIZE + head) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
@@ -2192,7 +2189,7 @@ static BlockDriver bdrv_iscsi = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
@@ -2227,7 +2224,7 @@ static BlockDriver bdrv_iser = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
--
2.14.3
next prev parent reply other threads:[~2017-12-01 15:56 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-01 1:42 [Qemu-devel] [PATCH v5 00/20] add byte-based block_status driver callbacks Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 01/20] block: Add .bdrv_co_block_status() callback Eric Blake
2017-12-01 14:40 ` Kevin Wolf
2017-12-01 15:03 ` Eric Blake
2017-12-01 15:24 ` Kevin Wolf
2017-12-06 15:20 ` Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 02/20] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 03/20] file-posix: Switch " Eric Blake
2017-12-01 16:00 ` Kevin Wolf
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 04/20] gluster: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 05/20] iscsi: Switch cluster_sectors to byte-based Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 06/20] iscsi: Switch iscsi_allocmap_update() " Eric Blake
2017-12-01 1:42 ` Eric Blake [this message]
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 08/20] null: Switch to .bdrv_co_block_status() Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 09/20] parallels: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 10/20] qcow: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 11/20] qcow2: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 12/20] qed: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 13/20] raw: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 14/20] sheepdog: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 15/20] vdi: Avoid bitrot of debugging code Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 16/20] vdi: Switch to .bdrv_co_block_status() Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 17/20] vmdk: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 18/20] vpc: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 19/20] vvfat: " Eric Blake
2017-12-01 1:42 ` [Qemu-devel] [PATCH v5 20/20] block: Drop unused .bdrv_co_get_block_status() Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171201014242.16877-8-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=famz@redhat.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=pl@kamp.de \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=ronniesahlberg@gmail.com \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.