From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/8] ARM: dts: keystone*: Use a single soc0 instance
Date: Fri, 15 Dec 2017 07:20:56 -0600 [thread overview]
Message-ID: <20171215132102.435-3-nm@ti.com> (raw)
In-Reply-To: <20171215132102.435-1-nm@ti.com>
Provide and soc0 node and reference the same to simplify dts. This also
resolves the following warnings when built with W=1:
arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
NOTE: Though we can reformat files by reducing 1 level of indent due to
the use of soc0 phandle, we ommit that change to prevent un-necessary
churn in code base.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/boot/dts/keystone-k2e-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2e.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2g.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2hk-evm.dts | 50 ++++++++++++++++-----------------
arch/arm/boot/dts/keystone-k2hk.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2l-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2l.dtsi | 4 +--
arch/arm/boot/dts/keystone.dtsi | 2 +-
8 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index a7b9138cceb7..6cc29c5107b7 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
@@ -50,7 +51,6 @@
clock-output-names = "refclk-ddr3a";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 34860c10fa4d..6d1e41c58c27 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -45,8 +45,9 @@
aliases {
rproc0 = &dsp0;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2e-clocks.dtsi"
usb: usb at 2680000 {
@@ -191,5 +192,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2e-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 0f3126e3ba77..369630b91b99 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -67,7 +67,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
};
- soc {
+ soc0: soc at 0 {
#address-cells = <1>;
#size-cells = <1>;
#pinctrl-cells = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 2964aa67d264..e2b17057d240 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -26,7 +26,31 @@
};
};
- soc {
+ leds {
+ compatible = "gpio-leds";
+ debug1_1 {
+ label = "keystone:green:debug1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+ };
+
+ debug1_2 {
+ label = "keystone:red:debug1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+ };
+
+ debug2 {
+ label = "keystone:blue:debug2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+ };
+
+ debug3 {
+ label = "keystone:blue:debug3";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+ };
+ };
+};
+
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -63,30 +87,6 @@
clock-output-names = "refclk-ddr3b";
};
};
- };
-
- leds {
- compatible = "gpio-leds";
- debug1_1 {
- label = "keystone:green:debug1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
- };
-
- debug1_2 {
- label = "keystone:red:debug1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
- };
-
- debug2 {
- label = "keystone:blue:debug2";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
- };
-
- debug3 {
- label = "keystone:blue:debug3";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
- };
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 8f6cc98c0ef6..704203fed15a 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -52,8 +52,9 @@
rproc6 = &dsp6;
rproc7 = &dsp7;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2hk-clocks.dtsi"
msm_ram: msmram at c000000 {
@@ -281,5 +282,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2hk-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index bc60f1bd2a39..45edbaaf464a 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -35,7 +36,6 @@
clock-output-names = "refclk-sys";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 20d2626fb054..e0c8354d3996 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -36,8 +36,9 @@
rproc2 = &dsp2;
rproc3 = &dsp3;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2l-clocks.dtsi"
uart2: serial at 2348400 {
@@ -347,7 +348,6 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2l-netcp.dtsi"
- };
};
&spi0 {
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index ca2cc5d8e3b5..0e8d094515cc 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -67,7 +67,7 @@
cpu_on = <0x84000003>;
};
- soc {
+ soc0: soc at 0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,keystone","simple-bus";
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Russell King <linux@armlinux.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Santosh Shilimkar <ssantosh@kernel.org>
Cc: Nishanth Menon <nm@ti.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/8] ARM: dts: keystone*: Use a single soc0 instance
Date: Fri, 15 Dec 2017 07:20:56 -0600 [thread overview]
Message-ID: <20171215132102.435-3-nm@ti.com> (raw)
In-Reply-To: <20171215132102.435-1-nm@ti.com>
Provide and soc0 node and reference the same to simplify dts. This also
resolves the following warnings when built with W=1:
arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
NOTE: Though we can reformat files by reducing 1 level of indent due to
the use of soc0 phandle, we ommit that change to prevent un-necessary
churn in code base.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/boot/dts/keystone-k2e-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2e.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2g.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2hk-evm.dts | 50 ++++++++++++++++-----------------
arch/arm/boot/dts/keystone-k2hk.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2l-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2l.dtsi | 4 +--
arch/arm/boot/dts/keystone.dtsi | 2 +-
8 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index a7b9138cceb7..6cc29c5107b7 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
@@ -50,7 +51,6 @@
clock-output-names = "refclk-ddr3a";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 34860c10fa4d..6d1e41c58c27 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -45,8 +45,9 @@
aliases {
rproc0 = &dsp0;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2e-clocks.dtsi"
usb: usb@2680000 {
@@ -191,5 +192,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2e-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 0f3126e3ba77..369630b91b99 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -67,7 +67,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
#pinctrl-cells = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 2964aa67d264..e2b17057d240 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -26,7 +26,31 @@
};
};
- soc {
+ leds {
+ compatible = "gpio-leds";
+ debug1_1 {
+ label = "keystone:green:debug1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+ };
+
+ debug1_2 {
+ label = "keystone:red:debug1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+ };
+
+ debug2 {
+ label = "keystone:blue:debug2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+ };
+
+ debug3 {
+ label = "keystone:blue:debug3";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+ };
+ };
+};
+
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -63,30 +87,6 @@
clock-output-names = "refclk-ddr3b";
};
};
- };
-
- leds {
- compatible = "gpio-leds";
- debug1_1 {
- label = "keystone:green:debug1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
- };
-
- debug1_2 {
- label = "keystone:red:debug1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
- };
-
- debug2 {
- label = "keystone:blue:debug2";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
- };
-
- debug3 {
- label = "keystone:blue:debug3";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
- };
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 8f6cc98c0ef6..704203fed15a 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -52,8 +52,9 @@
rproc6 = &dsp6;
rproc7 = &dsp7;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2hk-clocks.dtsi"
msm_ram: msmram@c000000 {
@@ -281,5 +282,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2hk-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index bc60f1bd2a39..45edbaaf464a 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -35,7 +36,6 @@
clock-output-names = "refclk-sys";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 20d2626fb054..e0c8354d3996 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -36,8 +36,9 @@
rproc2 = &dsp2;
rproc3 = &dsp3;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2l-clocks.dtsi"
uart2: serial@2348400 {
@@ -347,7 +348,6 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2l-netcp.dtsi"
- };
};
&spi0 {
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index ca2cc5d8e3b5..0e8d094515cc 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -67,7 +67,7 @@
cpu_on = <0x84000003>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,keystone","simple-bus";
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Russell King <linux@armlinux.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Santosh Shilimkar <ssantosh@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH 2/8] ARM: dts: keystone*: Use a single soc0 instance
Date: Fri, 15 Dec 2017 07:20:56 -0600 [thread overview]
Message-ID: <20171215132102.435-3-nm@ti.com> (raw)
In-Reply-To: <20171215132102.435-1-nm@ti.com>
Provide and soc0 node and reference the same to simplify dts. This also
resolves the following warnings when built with W=1:
arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
NOTE: Though we can reformat files by reducing 1 level of indent due to
the use of soc0 phandle, we ommit that change to prevent un-necessary
churn in code base.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/boot/dts/keystone-k2e-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2e.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2g.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2hk-evm.dts | 50 ++++++++++++++++-----------------
arch/arm/boot/dts/keystone-k2hk.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2l-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2l.dtsi | 4 +--
arch/arm/boot/dts/keystone.dtsi | 2 +-
8 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index a7b9138cceb7..6cc29c5107b7 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
@@ -50,7 +51,6 @@
clock-output-names = "refclk-ddr3a";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 34860c10fa4d..6d1e41c58c27 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -45,8 +45,9 @@
aliases {
rproc0 = &dsp0;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2e-clocks.dtsi"
usb: usb@2680000 {
@@ -191,5 +192,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2e-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 0f3126e3ba77..369630b91b99 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -67,7 +67,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
#pinctrl-cells = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 2964aa67d264..e2b17057d240 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -26,7 +26,31 @@
};
};
- soc {
+ leds {
+ compatible = "gpio-leds";
+ debug1_1 {
+ label = "keystone:green:debug1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+ };
+
+ debug1_2 {
+ label = "keystone:red:debug1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+ };
+
+ debug2 {
+ label = "keystone:blue:debug2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+ };
+
+ debug3 {
+ label = "keystone:blue:debug3";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+ };
+ };
+};
+
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -63,30 +87,6 @@
clock-output-names = "refclk-ddr3b";
};
};
- };
-
- leds {
- compatible = "gpio-leds";
- debug1_1 {
- label = "keystone:green:debug1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
- };
-
- debug1_2 {
- label = "keystone:red:debug1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
- };
-
- debug2 {
- label = "keystone:blue:debug2";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
- };
-
- debug3 {
- label = "keystone:blue:debug3";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
- };
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 8f6cc98c0ef6..704203fed15a 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -52,8 +52,9 @@
rproc6 = &dsp6;
rproc7 = &dsp7;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2hk-clocks.dtsi"
msm_ram: msmram@c000000 {
@@ -281,5 +282,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2hk-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index bc60f1bd2a39..45edbaaf464a 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -35,7 +36,6 @@
clock-output-names = "refclk-sys";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 20d2626fb054..e0c8354d3996 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -36,8 +36,9 @@
rproc2 = &dsp2;
rproc3 = &dsp3;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2l-clocks.dtsi"
uart2: serial@2348400 {
@@ -347,7 +348,6 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2l-netcp.dtsi"
- };
};
&spi0 {
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index ca2cc5d8e3b5..0e8d094515cc 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -67,7 +67,7 @@
cpu_on = <0x84000003>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,keystone","simple-bus";
--
2.14.1
next prev parent reply other threads:[~2017-12-15 13:20 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 13:20 [PATCH 0/8] ARM: dts: keystone*: Stage 1 cleanup for W=1 Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` [PATCH 1/8] ARM: dts: keystone*: Standardize license with SPDX tag Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon [this message]
2017-12-15 13:20 ` [PATCH 2/8] ARM: dts: keystone*: Use a single soc0 instance Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:38 ` Nishanth Menon
2017-12-15 13:38 ` Nishanth Menon
2017-12-15 13:38 ` Nishanth Menon
2017-12-16 8:33 ` santosh.shilimkar at oracle.com
2017-12-16 8:33 ` santosh.shilimkar
2017-12-16 8:33 ` santosh.shilimkar-QHcLZuEGTsvQT0dZR+AlfA
2017-12-15 13:20 ` [PATCH 3/8] ARM: dts: keystone: Get rid of usage of skeleton.dtsi Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` [PATCH 4/8] ARM: dts: keystone: Add missing unit name to interrupt controller Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` [PATCH 5/8] ARM: dts: keystone-clocks: Add missing unit name to clock nodes that have regs Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:21 ` [PATCH 6/8] ARM: dts: keystone-hk-clocks: " Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` [PATCH 7/8] ARM: dts: keystone-k2e-clocks: " Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` [PATCH 8/8] ARM: dts: keystone-k2l-clocks: " Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 0/8] ARM: dts: keystone*: Stage 1 cleanup for W=1 Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 1/8] ARM: dts: keystone*: Standardize license with SPDX tag Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 2/8] ARM: dts: keystone*: Use a single soc0 instance Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 3/8] ARM: dts: keystone: Get rid of usage of skeleton.dtsi Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 4/8] ARM: dts: keystone: Add missing unit name to interrupt controller Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 5/8] ARM: dts: keystone-clocks: Add missing unit name to clock nodes that have regs Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 6/8] ARM: dts: keystone-hk-clocks: " Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 7/8] ARM: dts: keystone-k2e-clocks: " Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 8/8] ARM: dts: keystone-k2l-clocks: " Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 22:39 ` [PATCH V2 0/8] ARM: dts: keystone*: Stage 1 cleanup for W=1 santosh.shilimkar at oracle.com
2017-12-16 22:39 ` santosh.shilimkar
2017-12-16 22:39 ` santosh.shilimkar-QHcLZuEGTsvQT0dZR+AlfA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171215132102.435-3-nm@ti.com \
--to=nm@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.