From: Derald D. Woods <woods.technical@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/3] ARM: omap3: evm: Add OF_CONTROL support
Date: Sat, 16 Dec 2017 14:14:47 -0600 [thread overview]
Message-ID: <20171216201450.5770-1-woods.technical@gmail.com> (raw)
This series adds OF_CONTROL support for TMDSEVM{3530,3730} and
additionally updates ethaddr setup with smc911x initialization.
Devicetree files are taken from Linux v4.15-rc3. Note that this is the
first addition of OMAP34XX devicetree files.
Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb]
--- 8< -----------------------------------------------------------------
U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10)
Trying to boot from MMC1
reading u-boot.img
reading u-boot.img
U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600)
OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
Model: TI OMAP35XX EVM (TMDSEVM3530)
OMAP3 EVM board + LPDDR/NAND
I2C: ready
DRAM: 256 MiB
NAND: 256 MiB
MMC: OMAP SD/MMC: 0
Read back SMSC id 0x92200000
OMAP die ID: 265a002400000000040365fa1801b01f
Net: smc911x-0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr
serial at 4806a000
serial at 4806a000
serial@4806a000
--- 8< -----------------------------------------------------------------
Derald D. Woods (3):
ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730}
ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730}
ARM: omap3: evm: Refactor 'board_eth_init'
arch/arm/dts/Makefile | 4 +
arch/arm/dts/omap-gpmc-smsc911x.dtsi | 55 ++++++
arch/arm/dts/omap3-evm-37xx-u-boot.dtsi | 29 ++++
arch/arm/dts/omap3-evm-37xx.dts | 110 ++++++++++++
arch/arm/dts/omap3-evm-common.dtsi | 195 +++++++++++++++++++++
arch/arm/dts/omap3-evm-processor-common.dtsi | 216 ++++++++++++++++++++++++
arch/arm/dts/omap3-evm-u-boot.dtsi | 29 ++++
arch/arm/dts/omap3-evm.dts | 89 ++++++++++
arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 73 ++++++++
arch/arm/dts/omap34xx.dtsi | 84 +++++++++
arch/arm/mach-omap2/omap3/Kconfig | 4 +
board/ti/evm/evm.c | 24 +--
configs/omap3_evm_defconfig | 9 +-
include/configs/omap3_evm.h | 2 -
14 files changed, 896 insertions(+), 27 deletions(-)
create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi
create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
create mode 100644 arch/arm/dts/omap3-evm-37xx.dts
create mode 100644 arch/arm/dts/omap3-evm-common.dtsi
create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi
create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi
create mode 100644 arch/arm/dts/omap3-evm.dts
create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
create mode 100644 arch/arm/dts/omap34xx.dtsi
--
2.15.1
next reply other threads:[~2017-12-16 20:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-16 20:14 Derald D. Woods [this message]
2017-12-16 20:14 ` [U-Boot] [PATCH 1/3] ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} Derald D. Woods
2018-01-02 0:47 ` [U-Boot] [U-Boot, " Tom Rini
2017-12-16 20:14 ` [U-Boot] [PATCH 2/3] ARM: dts: omap3-evm: Enable DM and devicetree " Derald D. Woods
2017-12-17 2:36 ` Derald D. Woods
2017-12-27 13:15 ` [U-Boot] [U-Boot, " Tom Rini
2017-12-27 15:22 ` Derald D. Woods
2017-12-27 15:37 ` [U-Boot] [PATCH v3 " Derald D. Woods
2017-12-27 15:40 ` [U-Boot] [PATCH v4 " Derald D. Woods
2018-01-02 0:47 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-12-16 20:14 ` [U-Boot] [PATCH 3/3] ARM: omap3: evm: Refactor 'board_eth_init' Derald D. Woods
2018-01-02 0:47 ` [U-Boot] [U-Boot, " Tom Rini
2017-12-26 3:34 ` [U-Boot] [PATCH 0/3] ARM: omap3: evm: Add OF_CONTROL support Derald D. Woods
2017-12-26 16:14 ` Tom Rini
2017-12-26 17:08 ` Derald D. Woods
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171216201450.5770-1-woods.technical@gmail.com \
--to=woods.technical@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.