[U-Boot] [PATCH 1/3] ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730}

[Derald D. Woods <woods.technical@gmail.com>]

This commit adds OMAP3 EVM devicetree files from Linux v4.15-rc3. Note
that this is the first addition of OMAP34XX devicetree files.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
---
 arch/arm/dts/Makefile                           |   4 +
 arch/arm/dts/omap-gpmc-smsc911x.dtsi            |  55 ++++++
 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi         |  29 ++++
 arch/arm/dts/omap3-evm-37xx.dts                 | 110 ++++++++++++
 arch/arm/dts/omap3-evm-common.dtsi              | 195 +++++++++++++++++++++
 arch/arm/dts/omap3-evm-processor-common.dtsi    | 216 ++++++++++++++++++++++++
 arch/arm/dts/omap3-evm-u-boot.dtsi              |  29 ++++
 arch/arm/dts/omap3-evm.dts                      |  89 ++++++++++
 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi |  73 ++++++++
 arch/arm/dts/omap34xx.dtsi                      |  84 +++++++++
 10 files changed, 884 insertions(+)
 create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi
 create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
 create mode 100644 arch/arm/dts/omap3-evm-37xx.dts
 create mode 100644 arch/arm/dts/omap3-evm-common.dtsi
 create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi
 create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi
 create mode 100644 arch/arm/dts/omap3-evm.dts
 create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
 create mode 100644 arch/arm/dts/omap34xx.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1c9ac1468b..cf23a46f4c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -432,6 +432,10 @@ dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \
 	logicpd-torpedo-37xx-devkit.dtb \
 	logicpd-som-lv-37xx-devkit.dtb
 
+dtb-$(CONFIG_TARGET_OMAP3_EVM) += \
+	omap3-evm-37xx.dtb \
+	omap3-evm.dtb
+
 dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \
 	at91-sama5d2_ptc_ek.dtb
 
diff --git a/arch/arm/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/dts/omap-gpmc-smsc911x.dtsi
new file mode 100644
index 0000000000..ded7e8fec9
--- /dev/null
+++ b/arch/arm/dts/omap-gpmc-smsc911x.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for GPMC connected smsc911x on omaps
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet at gpmc {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,device-width = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <5>;
+		gpmc,cs-rd-off-ns = <150>;
+		gpmc,cs-wr-off-ns = <150>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <15>;
+		gpmc,adv-wr-off-ns = <40>;
+		gpmc,oe-on-ns = <45>;
+		gpmc,oe-off-ns = <140>;
+		gpmc,we-on-ns = <45>;
+		gpmc,we-off-ns = <140>;
+		gpmc,rd-cycle-ns = <155>;
+		gpmc,wr-cycle-ns = <155>;
+		gpmc,access-ns = <120>;
+		gpmc,page-burst-access-ns = <20>;
+		gpmc,bus-turnaround-ns = <75>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi b/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
new file mode 100644
index 0000000000..53a489988e
--- /dev/null
+++ b/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
@@ -0,0 +1,29 @@
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&mmc1 {
+	cd-inverted;
+};
+
+&uart1 {
+	reg-shift = <2>;
+};
+
+&uart2 {
+	reg-shift = <2>;
+};
+
+&uart3 {
+	reg-shift = <2>;
+};
diff --git a/arch/arm/dts/omap3-evm-37xx.dts b/arch/arm/dts/omap3-evm-37xx.dts
new file mode 100644
index 0000000000..5a4ba0aea4
--- /dev/null
+++ b/arch/arm/dts/omap3-evm-37xx.dts
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-evm-common.dtsi"
+#include "omap3-evm-processor-common.dtsi"
+
+/ {
+	model = "TI OMAP37XX EVM (TMDSEVM3730)";
+	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+
+	ehci_phy_pins: pinmux_ehci_phy_pins {
+		pinctrl-single,pins = <
+
+		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
+		OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
+
+		/* EHCI VBUS etk_d8.gpio_22 */
+		OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
+		>;
+	};
+
+	/* Used by OHCI and EHCI. OHCI won't work without external phy */
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+
+		/* etk_d10.hsusb2_clk */
+		OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d11.hsusb2_stp */
+		OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d12.hsusb2_dir */
+		OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d13.hsusb2_nxt */
+		OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d14.hsusb2_data0 */
+		OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d15.hsusb2_data1 */
+		OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+&gpmc {
+	nand at 0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "hynix,h8kds0un0mer-4em";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition at 0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition at 0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition at 0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition at 0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition at 0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0x1f880000>;
+		};
+	};
+};
diff --git a/arch/arm/dts/omap3-evm-common.dtsi b/arch/arm/dts/omap3-evm-common.dtsi
new file mode 100644
index 0000000000..ee64191e41
--- /dev/null
+++ b/arch/arm/dts/omap3-evm-common.dtsi
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for omap3 EVM boards
+ */
+
+#include <dt-bindings/input/input.h>
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	cpus {
+		cpu at 0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl at 48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
+};
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146 at 5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&lcd_3v3 {
+	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
+};
+
+&lcd0 {
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+};
+
+&mcspi1 {
+	tsc2046 at 0 {
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;		/* gpio175 */
+		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore at 2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&twl_keypad {
+	linux,keymap = <
+			MATRIX_KEY(2, 2, KEY_1)
+			MATRIX_KEY(1, 1, KEY_2)
+			MATRIX_KEY(0, 0, KEY_3)
+			MATRIX_KEY(3, 2, KEY_4)
+			MATRIX_KEY(2, 1, KEY_5)
+			MATRIX_KEY(1, 0, KEY_6)
+			MATRIX_KEY(1, 3, KEY_7)
+			MATRIX_KEY(3, 1, KEY_8)
+			MATRIX_KEY(2, 0, KEY_9)
+			MATRIX_KEY(2, 3, KEY_KPASTERISK)
+			MATRIX_KEY(0, 2, KEY_0)
+			MATRIX_KEY(3, 0, KEY_KPDOT)
+			/* s4 not wired */
+			MATRIX_KEY(1, 2, KEY_BACKSPACE)
+			MATRIX_KEY(0, 1, KEY_ENTER)
+			>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ethernet at gpmc {
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 8>;
+		reg = <5 0 0xff>;
+	};
+};
+
+&vaux2 {
+	regulator-name = "usb_1v8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/arch/arm/dts/omap3-evm-processor-common.dtsi b/arch/arm/dts/omap3-evm-processor-common.dtsi
new file mode 100644
index 0000000000..ce7f42f944
--- /dev/null
+++ b/arch/arm/dts/omap3-evm-processor-common.dtsi
@@ -0,0 +1,216 @@
+/*
+ * Common support for omap3 EVM 35xx/37xx processor modules
+ */
+
+/ {
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+	};
+};
+
+&dss {
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&lcd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+};
+
+&hsusb2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehci_phy_pins>;
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	/* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
+	on_board_gpio_61: pinmux_ehci_port_select_pins {
+		pinctrl-single,pins = <
+		OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4)
+		>;
+	};
+
+	/* Used by OHCI and EHCI. OHCI won't work without external phy */
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+
+		/* mcspi1_cs3.hsusb2_data2 */
+		OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_clk.hsusb2_data7 */
+		OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_simo.hsusb2_data4 */
+		OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_somi.hsusb2_data5 */
+		OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_cs0.hsusb2_data6 */
+		OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_cs1.hsusb2_data3 */
+		OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+		>;
+	};
+
+	smsc911x_pins: pinmux_smsc911x_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+/*
+ * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface
+ * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
+ */
+&gpio2 {
+	en_usb2_port {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
+		output-low;
+		line-name = "enable usb2 port";
+	};
+};
+
+/* T2_GPIO_2 low to route GPIO_61 to on-board devices */
+&twl_gpio {
+	en_on_board_gpio_61 {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "en_hsusb2_clk";
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0: 16MB for NAND */
+		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for LAN9220 */
+
+	ethernet at gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc911x_pins>;
+	};
+};
diff --git a/arch/arm/dts/omap3-evm-u-boot.dtsi b/arch/arm/dts/omap3-evm-u-boot.dtsi
new file mode 100644
index 0000000000..53a489988e
--- /dev/null
+++ b/arch/arm/dts/omap3-evm-u-boot.dtsi
@@ -0,0 +1,29 @@
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&mmc1 {
+	cd-inverted;
+};
+
+&uart1 {
+	reg-shift = <2>;
+};
+
+&uart2 {
+	reg-shift = <2>;
+};
+
+&uart3 {
+	reg-shift = <2>;
+};
diff --git a/arch/arm/dts/omap3-evm.dts b/arch/arm/dts/omap3-evm.dts
new file mode 100644
index 0000000000..21a3b88aef
--- /dev/null
+++ b/arch/arm/dts/omap3-evm.dts
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-evm-common.dtsi"
+#include "omap3-evm-processor-common.dtsi"
+
+/ {
+	model = "TI OMAP35XX EVM (TMDSEVM3530)";
+	compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+
+	ehci_phy_pins: pinmux_ehci_phy_pins {
+		pinctrl-single,pins = <
+
+		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
+		OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
+
+		/* EHCI VBUS etk_d8.gpio_22 */
+		OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
+		>;
+	};
+
+	/* Used by OHCI and EHCI. OHCI won't work without external phy */
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+
+		/* etk_d10.hsusb2_clk */
+		OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d11.hsusb2_stp */
+		OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d12.hsusb2_dir */
+		OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d13.hsusb2_nxt */
+		OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d14.hsusb2_data0 */
+		OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d15.hsusb2_data1 */
+		OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+&gpmc {
+	nand at 0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "micron,mt29f2g16abdhc";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
new file mode 100644
index 0000000000..b8b9fcc41e
--- /dev/null
+++ b/arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for omap dpi panels with QVGA and reset pins
+ *
+ * Note that the board specifc DTS file needs to specify
+ * at minimum the GPIO enable-gpios for display, and
+ * gpios for gpio-backlight.
+ */
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	backlight0: backlight {
+		compatible = "gpio-backlight";
+		default-on;
+	};
+
+	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
+	lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	lcd0: display {
+		compatible = "sharp,ls037v7dw01";
+		label = "lcd";
+		power-supply = <&lcd_3v3>;
+		envdd-supply = <&lcd_3v3>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <18>;
+		};
+	};
+};
+
+&mcspi1 {
+	tsc2046 at 0 {
+		reg = <0>;			/* CS0 */
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&lcd_3v3>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <40>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,swap-xy;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/dts/omap34xx.dtsi b/arch/arm/dts/omap34xx.dtsi
new file mode 100644
index 0000000000..ac4f8795b7
--- /dev/null
+++ b/arch/arm/dts/omap34xx.dtsi
@@ -0,0 +1,84 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP35xx SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/media/omap3-isp.h>
+
+#include "omap3.dtsi"
+
+/ {
+	cpus {
+		cpu: cpu at 0 {
+			/* OMAP343x/OMAP35xx variants OPP1-5 */
+			operating-points = <
+				/* kHz    uV */
+				125000   975000
+				250000  1075000
+				500000  1200000
+				550000  1270000
+				600000  1350000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
+	ocp at 68000000 {
+		omap3_pmx_core2: pinmux at 480025d8 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025d8 0x24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+
+		isp: isp at 480bc000 {
+			compatible = "ti,omap3-isp";
+			reg = <0x480bc000 0x12fc
+			       0x480bd800 0x017c>;
+			interrupts = <24>;
+			iommus = <&mmu_isp>;
+			syscon = <&scm_conf 0x6c>;
+			ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
+			#clock-cells = <1>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		bandgap: bandgap at 48002524 {
+			reg = <0x48002524 0x4>;
+			compatible = "ti,omap34xx-bandgap";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		#include "omap3-cpu-thermal.dtsi"
+	};
+};
+
+&ssi {
+	status = "ok";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+};
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
-- 
2.15.1