From: Dan Murphy <dmurphy-l0cyMroinI0@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org,
jacek.anaszewski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
pavel-+ZI9xUNit7I@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Dan Murphy <dmurphy-l0cyMroinI0@public.gmane.org>
Subject: [PATCH v5 1/6] dt: bindings: lp8860: Update bindings for lp8860
Date: Mon, 18 Dec 2017 14:23:02 -0600 [thread overview]
Message-ID: <20171218202307.4913-1-dmurphy@ti.com> (raw)
Update the lp8860 bindings to fix various issues
found. Rename enable-gpio to enable-gpios,
update the node name to the device name and
indent the node example.
Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Dan Murphy <dmurphy-l0cyMroinI0@public.gmane.org>
---
v5 - Update commit message to remove address and size cells - https://patchwork.kernel.org/patch/10108357/
v4 - No changes
v3 - Indicatd enable-gpios is active high, moved address and size cells to child
node patch and updated parent DT node name - https://patchwork.kernel.org/patch/10093745/
v2 - New patch
Documentation/devicetree/bindings/leds/leds-lp8860.txt | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
index aad38dd94d4b..b9d09acbaa73 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -6,22 +6,22 @@ current sinks that can be controlled by a PWM input
signal, a SPI/I2C master, or both.
Required properties:
- - compatible:
+ - compatible :
"ti,lp8860"
- - reg - I2C slave address
- - label - Used for naming LEDs
+ - reg : I2C slave address
+ - label : Used for naming LEDs
Optional properties:
- - enable-gpio - gpio pin to enable/disable the device.
- - supply - "vled" - LED supply
+ - enable-gpios : gpio pin to enable (active high)/disable the device.
+ - vled-supply : LED supply
Example:
-leds: leds@6 {
+led-controller@2d {
compatible = "ti,lp8860";
reg = <0x2d>;
label = "display_cluster";
- enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
vled-supply = <&vbatt>;
}
--
2.15.0.124.g7668cbc60
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>, <rpurdie@rpsys.net>,
<jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v5 1/6] dt: bindings: lp8860: Update bindings for lp8860
Date: Mon, 18 Dec 2017 14:23:02 -0600 [thread overview]
Message-ID: <20171218202307.4913-1-dmurphy@ti.com> (raw)
Update the lp8860 bindings to fix various issues
found. Rename enable-gpio to enable-gpios,
update the node name to the device name and
indent the node example.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
v5 - Update commit message to remove address and size cells - https://patchwork.kernel.org/patch/10108357/
v4 - No changes
v3 - Indicatd enable-gpios is active high, moved address and size cells to child
node patch and updated parent DT node name - https://patchwork.kernel.org/patch/10093745/
v2 - New patch
Documentation/devicetree/bindings/leds/leds-lp8860.txt | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
index aad38dd94d4b..b9d09acbaa73 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -6,22 +6,22 @@ current sinks that can be controlled by a PWM input
signal, a SPI/I2C master, or both.
Required properties:
- - compatible:
+ - compatible :
"ti,lp8860"
- - reg - I2C slave address
- - label - Used for naming LEDs
+ - reg : I2C slave address
+ - label : Used for naming LEDs
Optional properties:
- - enable-gpio - gpio pin to enable/disable the device.
- - supply - "vled" - LED supply
+ - enable-gpios : gpio pin to enable (active high)/disable the device.
+ - vled-supply : LED supply
Example:
-leds: leds@6 {
+led-controller@2d {
compatible = "ti,lp8860";
reg = <0x2d>;
label = "display_cluster";
- enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
vled-supply = <&vbatt>;
}
--
2.15.0.124.g7668cbc60
next reply other threads:[~2017-12-18 20:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-18 20:23 Dan Murphy [this message]
2017-12-18 20:23 ` [PATCH v5 1/6] dt: bindings: lp8860: Update bindings for lp8860 Dan Murphy
2017-12-18 20:23 ` [PATCH v5 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860 Dan Murphy
2017-12-18 20:23 ` Dan Murphy
2017-12-20 18:29 ` Rob Herring
2017-12-18 20:23 ` [PATCH v5 5/6] leds: lp8860: Add DT parsing to retrieve the trigger node Dan Murphy
2017-12-18 20:23 ` Dan Murphy
[not found] ` <20171218202307.4913-1-dmurphy-l0cyMroinI0@public.gmane.org>
2017-12-18 20:23 ` [PATCH v5 2/6] dt: bindings: lp8860: Update DT label binding Dan Murphy
2017-12-18 20:23 ` Dan Murphy
2017-12-20 18:28 ` Rob Herring
2017-12-18 20:23 ` [PATCH v5 3/6] leds: lp8860: Update the dt parsing for LED labeling Dan Murphy
2017-12-18 20:23 ` Dan Murphy
2017-12-18 20:23 ` [PATCH v5 6/6] leds: lp8860: Various fixes to align with LED framework Dan Murphy
2017-12-18 20:23 ` Dan Murphy
2017-12-19 20:20 ` [PATCH v5 1/6] dt: bindings: lp8860: Update bindings for lp8860 Jacek Anaszewski
2017-12-19 20:20 ` Jacek Anaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171218202307.4913-1-dmurphy@ti.com \
--to=dmurphy-l0cymroini0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jacek.anaszewski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pavel-+ZI9xUNit7I@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.