[PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Eugeniy Paltsev]

Set initial core pll output frequency on HSDK and AXS103 via
"assigned-clock-rates" property in device tree.  
It will be applied at the core pll driver probing.

Eugeniy Paltsev (4):
  ARC: [plat-hsdk]: Set initial core pll output frequency
  ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
  ARC: [plat-axs103]: Set initial core pll output frequency
  ARC: [plat-axs103] refactor the quad core DT quirk code

 arch/arc/boot/dts/axc003.dtsi     |  3 +++
 arch/arc/boot/dts/axc003_idu.dtsi |  3 +++
 arch/arc/boot/dts/hsdk.dts        |  3 +++
 arch/arc/plat-axs10x/axs10x.c     | 18 ++++++++---------
 arch/arc/plat-hsdk/platform.c     | 42 ---------------------------------------
 5 files changed, 17 insertions(+), 52 deletions(-)

-- 
2.9.3

[PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Eugeniy Paltsev]

Set initial core pll output frequency on HSDK and AXS103 via
"assigned-clock-rates" property in device tree.  
It will be applied at the core pll driver probing.

Eugeniy Paltsev (4):
  ARC: [plat-hsdk]: Set initial core pll output frequency
  ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
  ARC: [plat-axs103]: Set initial core pll output frequency
  ARC: [plat-axs103] refactor the quad core DT quirk code

 arch/arc/boot/dts/axc003.dtsi     |  3 +++
 arch/arc/boot/dts/axc003_idu.dtsi |  3 +++
 arch/arc/boot/dts/hsdk.dts        |  3 +++
 arch/arc/plat-axs10x/axs10x.c     | 18 ++++++++---------
 arch/arc/plat-hsdk/platform.c     | 42 ---------------------------------------
 5 files changed, 17 insertions(+), 52 deletions(-)

-- 
2.9.3

[PATCH 1/4] ARC: [plat-hsdk]: Set initial core pll output frequency

[Eugeniy Paltsev]

Set initial core pll output frequency specified in device tree to
1GHz. It will be applied at the core pll driver probing.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
 arch/arc/boot/dts/hsdk.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 8f627c2..006aa3d 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -114,6 +114,14 @@
 			reg = <0x00 0x10>, <0x14B8 0x4>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 1GHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <1000000000>;
 		};
 
 		serial: serial at 5000 {
-- 
2.9.3

[PATCH 1/4] ARC: [plat-hsdk]: Set initial core pll output frequency

[Eugeniy Paltsev]

Set initial core pll output frequency specified in device tree to
1GHz. It will be applied at the core pll driver probing.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
 arch/arc/boot/dts/hsdk.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 8f627c2..006aa3d 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -114,6 +114,14 @@
 			reg = <0x00 0x10>, <0x14B8 0x4>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 1GHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <1000000000>;
 		};
 
 		serial: serial@5000 {
-- 
2.9.3

[PATCH 2/4] ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code

[Eugeniy Paltsev]

Get rid of core pll frequency set in platform code as we set it via
device tree using 'assigned-clock-rates' property.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
 arch/arc/plat-hsdk/platform.c | 42 ------------------------------------------
 1 file changed, 42 deletions(-)

diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
index fd0ae5e..2958aed 100644
--- a/arch/arc/plat-hsdk/platform.c
+++ b/arch/arc/plat-hsdk/platform.c
@@ -38,42 +38,6 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
 #define CREG_PAE		(CREG_BASE + 0x180)
 #define CREG_PAE_UPDATE		(CREG_BASE + 0x194)
 
-#define CREG_CORE_IF_CLK_DIV	(CREG_BASE + 0x4B8)
-#define CREG_CORE_IF_CLK_DIV_2	0x1
-#define CGU_BASE		ARC_PERIPHERAL_BASE
-#define CGU_PLL_STATUS		(ARC_PERIPHERAL_BASE + 0x4)
-#define CGU_PLL_CTRL		(ARC_PERIPHERAL_BASE + 0x0)
-#define CGU_PLL_STATUS_LOCK	BIT(0)
-#define CGU_PLL_STATUS_ERR	BIT(1)
-#define CGU_PLL_CTRL_1GHZ	0x3A10
-#define HSDK_PLL_LOCK_TIMEOUT	500
-
-#define HSDK_PLL_LOCKED() \
-	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK)
-
-#define HSDK_PLL_ERR() \
-	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR)
-
-static void __init hsdk_set_cpu_freq_1ghz(void)
-{
-	u32 timeout = HSDK_PLL_LOCK_TIMEOUT;
-
-	/*
-	 * As we set cpu clock which exceeds 500MHz, the divider for the interface
-	 * clock must be programmed to div-by-2.
-	 */
-	iowrite32(CREG_CORE_IF_CLK_DIV_2, (void __iomem *) CREG_CORE_IF_CLK_DIV);
-
-	/* Set cpu clock to 1GHz */
-	iowrite32(CGU_PLL_CTRL_1GHZ, (void __iomem *) CGU_PLL_CTRL);
-
-	while (!HSDK_PLL_LOCKED() && timeout--)
-		cpu_relax();
-
-	if (!HSDK_PLL_LOCKED() || HSDK_PLL_ERR())
-		pr_err("Failed to setup CPU frequency to 1GHz!");
-}
-
 #define SDIO_BASE		(ARC_PERIPHERAL_BASE + 0xA000)
 #define SDIO_UHS_REG_EXT	(SDIO_BASE + 0x108)
 #define SDIO_UHS_REG_EXT_DIV_2	(2 << 30)
@@ -98,12 +62,6 @@ static void __init hsdk_init_early(void)
 	 * minimum possible div-by-2.
 	 */
 	iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
-
-	/*
-	 * Setup CPU frequency to 1GHz.
-	 * TODO: remove it after smart hsdk pll driver will be introduced.
-	 */
-	hsdk_set_cpu_freq_1ghz();
 }
 
 static const char *hsdk_compat[] __initconst = {
-- 
2.9.3

[PATCH 2/4] ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code

[Eugeniy Paltsev]

Get rid of core pll frequency set in platform code as we set it via
device tree using 'assigned-clock-rates' property.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
 arch/arc/plat-hsdk/platform.c | 42 ------------------------------------------
 1 file changed, 42 deletions(-)

diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
index fd0ae5e..2958aed 100644
--- a/arch/arc/plat-hsdk/platform.c
+++ b/arch/arc/plat-hsdk/platform.c
@@ -38,42 +38,6 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
 #define CREG_PAE		(CREG_BASE + 0x180)
 #define CREG_PAE_UPDATE		(CREG_BASE + 0x194)
 
-#define CREG_CORE_IF_CLK_DIV	(CREG_BASE + 0x4B8)
-#define CREG_CORE_IF_CLK_DIV_2	0x1
-#define CGU_BASE		ARC_PERIPHERAL_BASE
-#define CGU_PLL_STATUS		(ARC_PERIPHERAL_BASE + 0x4)
-#define CGU_PLL_CTRL		(ARC_PERIPHERAL_BASE + 0x0)
-#define CGU_PLL_STATUS_LOCK	BIT(0)
-#define CGU_PLL_STATUS_ERR	BIT(1)
-#define CGU_PLL_CTRL_1GHZ	0x3A10
-#define HSDK_PLL_LOCK_TIMEOUT	500
-
-#define HSDK_PLL_LOCKED() \
-	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK)
-
-#define HSDK_PLL_ERR() \
-	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR)
-
-static void __init hsdk_set_cpu_freq_1ghz(void)
-{
-	u32 timeout = HSDK_PLL_LOCK_TIMEOUT;
-
-	/*
-	 * As we set cpu clock which exceeds 500MHz, the divider for the interface
-	 * clock must be programmed to div-by-2.
-	 */
-	iowrite32(CREG_CORE_IF_CLK_DIV_2, (void __iomem *) CREG_CORE_IF_CLK_DIV);
-
-	/* Set cpu clock to 1GHz */
-	iowrite32(CGU_PLL_CTRL_1GHZ, (void __iomem *) CGU_PLL_CTRL);
-
-	while (!HSDK_PLL_LOCKED() && timeout--)
-		cpu_relax();
-
-	if (!HSDK_PLL_LOCKED() || HSDK_PLL_ERR())
-		pr_err("Failed to setup CPU frequency to 1GHz!");
-}
-
 #define SDIO_BASE		(ARC_PERIPHERAL_BASE + 0xA000)
 #define SDIO_UHS_REG_EXT	(SDIO_BASE + 0x108)
 #define SDIO_UHS_REG_EXT_DIV_2	(2 << 30)
@@ -98,12 +62,6 @@ static void __init hsdk_init_early(void)
 	 * minimum possible div-by-2.
 	 */
 	iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
-
-	/*
-	 * Setup CPU frequency to 1GHz.
-	 * TODO: remove it after smart hsdk pll driver will be introduced.
-	 */
-	hsdk_set_cpu_freq_1ghz();
 }
 
 static const char *hsdk_compat[] __initconst = {
-- 
2.9.3

[PATCH 3/4] ARC: [plat-axs103]: Set initial core pll output frequency

[Eugeniy Paltsev]

Set initial core pll output frequency specified in device tree to
100MHz for SMP configuration and 90MHz for UP configuration.
It will be applied at the core pll driver probing.

Update platform quirk for decreasing core frequency for quad core
configuration.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
 arch/arc/boot/dts/axc003.dtsi     | 8 ++++++++
 arch/arc/boot/dts/axc003_idu.dtsi | 8 ++++++++
 arch/arc/plat-axs10x/axs10x.c     | 8 ++------
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index 4e6e9f5..dc91c66 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -35,6 +35,14 @@
 			reg = <0x80 0x10>, <0x100 0x10>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 90MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <90000000>;
 		};
 
 		core_intc: archs-intc at cpu {
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 63954a8..69ff4895 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -35,6 +35,14 @@
 			reg = <0x80 0x10>, <0x100 0x10>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 100MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <100000000>;
 		};
 
 		core_intc: archs-intc at cpu {
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index cf14ebc..28b3cb2 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -327,22 +327,18 @@ static void __init axs103_early_init(void)
 	unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
 	if (num_cores > 2) {
 		u32 freq = 50, orig;
-		/*
-		 * TODO: use cpu node "cpu-freq" param instead of platform-specific
-		 * "/cpu_card/core_clk" as it works only if we use fixed-clock for cpu.
-		 */
 		int off = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk");
 		const struct fdt_property *prop;
 
 		prop = fdt_get_property(initial_boot_params, off,
-					"clock-frequency", NULL);
+					"assigned-clock-rates", NULL);
 		orig = be32_to_cpu(*(u32*)(prop->data)) / 1000000;
 
 		/* Patching .dtb in-place with new core clock value */
 		if (freq != orig ) {
 			freq = cpu_to_be32(freq * 1000000);
 			fdt_setprop_inplace(initial_boot_params, off,
-					    "clock-frequency", &freq, sizeof(freq));
+					    "assigned-clock-rates", &freq, sizeof(freq));
 		}
 	}
 #endif
-- 
2.9.3

[PATCH 3/4] ARC: [plat-axs103]: Set initial core pll output frequency

[Eugeniy Paltsev]

Set initial core pll output frequency specified in device tree to
100MHz for SMP configuration and 90MHz for UP configuration.
It will be applied at the core pll driver probing.

Update platform quirk for decreasing core frequency for quad core
configuration.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
 arch/arc/boot/dts/axc003.dtsi     | 8 ++++++++
 arch/arc/boot/dts/axc003_idu.dtsi | 8 ++++++++
 arch/arc/plat-axs10x/axs10x.c     | 8 ++------
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index 4e6e9f5..dc91c66 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -35,6 +35,14 @@
 			reg = <0x80 0x10>, <0x100 0x10>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 90MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <90000000>;
 		};
 
 		core_intc: archs-intc@cpu {
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 63954a8..69ff4895 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -35,6 +35,14 @@
 			reg = <0x80 0x10>, <0x100 0x10>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 100MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <100000000>;
 		};
 
 		core_intc: archs-intc@cpu {
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index cf14ebc..28b3cb2 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -327,22 +327,18 @@ static void __init axs103_early_init(void)
 	unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
 	if (num_cores > 2) {
 		u32 freq = 50, orig;
-		/*
-		 * TODO: use cpu node "cpu-freq" param instead of platform-specific
-		 * "/cpu_card/core_clk" as it works only if we use fixed-clock for cpu.
-		 */
 		int off = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk");
 		const struct fdt_property *prop;
 
 		prop = fdt_get_property(initial_boot_params, off,
-					"clock-frequency", NULL);
+					"assigned-clock-rates", NULL);
 		orig = be32_to_cpu(*(u32*)(prop->data)) / 1000000;
 
 		/* Patching .dtb in-place with new core clock value */
 		if (freq != orig ) {
 			freq = cpu_to_be32(freq * 1000000);
 			fdt_setprop_inplace(initial_boot_params, off,
-					    "clock-frequency", &freq, sizeof(freq));
+					    "assigned-clock-rates", &freq, sizeof(freq));
 		}
 	}
 #endif
-- 
2.9.3

[PATCH 4/4] ARC: [plat-axs103] refactor the quad core DT quirk code

[Eugeniy Paltsev]

Refactor the quad core DT quirk code:
get rid of waste division and multiplication by 1000000 constant.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
 arch/arc/plat-axs10x/axs10x.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index 28b3cb2..0ea2f86 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -324,19 +324,21 @@ static void __init axs103_early_init(void)
 	 * Instead of duplicating defconfig/DT for SMP/QUAD, add a small hack
 	 * of fudging the freq in DT
 	 */
+#define AXS103_QUAD_CORE_CPU_FREQ_HZ	50000000
+
 	unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
 	if (num_cores > 2) {
-		u32 freq = 50, orig;
+		u32 freq;
 		int off = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk");
 		const struct fdt_property *prop;
 
 		prop = fdt_get_property(initial_boot_params, off,
 					"assigned-clock-rates", NULL);
-		orig = be32_to_cpu(*(u32*)(prop->data)) / 1000000;
+		freq = be32_to_cpu(*(u32 *)(prop->data));
 
 		/* Patching .dtb in-place with new core clock value */
-		if (freq != orig ) {
-			freq = cpu_to_be32(freq * 1000000);
+		if (freq != AXS103_QUAD_CORE_CPU_FREQ_HZ) {
+			freq = cpu_to_be32(AXS103_QUAD_CORE_CPU_FREQ_HZ);
 			fdt_setprop_inplace(initial_boot_params, off,
 					    "assigned-clock-rates", &freq, sizeof(freq));
 		}
-- 
2.9.3

[PATCH 4/4] ARC: [plat-axs103] refactor the quad core DT quirk code

[Eugeniy Paltsev]

Refactor the quad core DT quirk code:
get rid of waste division and multiplication by 1000000 constant.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
 arch/arc/plat-axs10x/axs10x.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index 28b3cb2..0ea2f86 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -324,19 +324,21 @@ static void __init axs103_early_init(void)
 	 * Instead of duplicating defconfig/DT for SMP/QUAD, add a small hack
 	 * of fudging the freq in DT
 	 */
+#define AXS103_QUAD_CORE_CPU_FREQ_HZ	50000000
+
 	unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
 	if (num_cores > 2) {
-		u32 freq = 50, orig;
+		u32 freq;
 		int off = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk");
 		const struct fdt_property *prop;
 
 		prop = fdt_get_property(initial_boot_params, off,
 					"assigned-clock-rates", NULL);
-		orig = be32_to_cpu(*(u32*)(prop->data)) / 1000000;
+		freq = be32_to_cpu(*(u32 *)(prop->data));
 
 		/* Patching .dtb in-place with new core clock value */
-		if (freq != orig ) {
-			freq = cpu_to_be32(freq * 1000000);
+		if (freq != AXS103_QUAD_CORE_CPU_FREQ_HZ) {
+			freq = cpu_to_be32(AXS103_QUAD_CORE_CPU_FREQ_HZ);
 			fdt_setprop_inplace(initial_boot_params, off,
 					    "assigned-clock-rates", &freq, sizeof(freq));
 		}
-- 
2.9.3

[PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Vineet Gupta]

On 12/09/2017 05:59 AM, Eugeniy Paltsev wrote:
> Set initial core pll output frequency on HSDK and AXS103 via
> "assigned-clock-rates" property in device tree.
> It will be applied at the core pll driver probing.
> 
> Eugeniy Paltsev (4):
>    ARC: [plat-hsdk]: Set initial core pll output frequency
>    ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
>    ARC: [plat-axs103]: Set initial core pll output frequency
>    ARC: [plat-axs103] refactor the quad core DT quirk code
> 
>   arch/arc/boot/dts/axc003.dtsi     |  3 +++
>   arch/arc/boot/dts/axc003_idu.dtsi |  3 +++
>   arch/arc/boot/dts/hsdk.dts        |  3 +++
>   arch/arc/plat-axs10x/axs10x.c     | 18 ++++++++---------
>   arch/arc/plat-hsdk/platform.c     | 42 ---------------------------------------
>   5 files changed, 17 insertions(+), 52 deletions(-)
> 

Alexey can you give this a quick spin on either boards and confirm if the DT 
changes are indeed what they were before ?

Thx,
-Vineet

Re: [PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Vineet Gupta]

On 12/09/2017 05:59 AM, Eugeniy Paltsev wrote:
> Set initial core pll output frequency on HSDK and AXS103 via
> "assigned-clock-rates" property in device tree.
> It will be applied at the core pll driver probing.
> 
> Eugeniy Paltsev (4):
>    ARC: [plat-hsdk]: Set initial core pll output frequency
>    ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
>    ARC: [plat-axs103]: Set initial core pll output frequency
>    ARC: [plat-axs103] refactor the quad core DT quirk code
> 
>   arch/arc/boot/dts/axc003.dtsi     |  3 +++
>   arch/arc/boot/dts/axc003_idu.dtsi |  3 +++
>   arch/arc/boot/dts/hsdk.dts        |  3 +++
>   arch/arc/plat-axs10x/axs10x.c     | 18 ++++++++---------
>   arch/arc/plat-hsdk/platform.c     | 42 ---------------------------------------
>   5 files changed, 17 insertions(+), 52 deletions(-)
> 

Alexey can you give this a quick spin on either boards and confirm if the DT 
changes are indeed what they were before ?

Thx,
-Vineet

[PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Stephen Boyd]

On 12/09, Eugeniy Paltsev wrote:
> Set initial core pll output frequency on HSDK and AXS103 via
> "assigned-clock-rates" property in device tree.  
> It will be applied at the core pll driver probing.
> 
> Eugeniy Paltsev (4):
>   ARC: [plat-hsdk]: Set initial core pll output frequency
>   ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
>   ARC: [plat-axs103]: Set initial core pll output frequency
>   ARC: [plat-axs103] refactor the quad core DT quirk code
> 

Patches look good to me.

Acked-by: Stephen Boyd <sboyd at codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Stephen Boyd]

On 12/09, Eugeniy Paltsev wrote:
> Set initial core pll output frequency on HSDK and AXS103 via
> "assigned-clock-rates" property in device tree.  
> It will be applied at the core pll driver probing.
> 
> Eugeniy Paltsev (4):
>   ARC: [plat-hsdk]: Set initial core pll output frequency
>   ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
>   ARC: [plat-axs103]: Set initial core pll output frequency
>   ARC: [plat-axs103] refactor the quad core DT quirk code
> 

Patches look good to me.

Acked-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Eugeniy Paltsev]

Set initial core pll output frequency on HSDK and AXS103 via
"assigned-clock-rates" property in device tree.  
It will be applied at the core pll driver probing.

Eugeniy Paltsev (4):
  ARC: [plat-hsdk]: Set initial core pll output frequency
  ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
  ARC: [plat-axs103]: Set initial core pll output frequency
  ARC: [plat-axs103] refactor the quad core DT quirk code

 arch/arc/boot/dts/axc003.dtsi     |  3 +++
 arch/arc/boot/dts/axc003_idu.dtsi |  3 +++
 arch/arc/boot/dts/hsdk.dts        |  3 +++
 arch/arc/plat-axs10x/axs10x.c     | 18 ++++++++---------
 arch/arc/plat-hsdk/platform.c     | 42 ---------------------------------------
 5 files changed, 17 insertions(+), 52 deletions(-)

-- 
2.9.3

[PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Eugeniy Paltsev]

Set initial core pll output frequency on HSDK and AXS103 via
"assigned-clock-rates" property in device tree.  
It will be applied at the core pll driver probing.

Eugeniy Paltsev (4):
  ARC: [plat-hsdk]: Set initial core pll output frequency
  ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
  ARC: [plat-axs103]: Set initial core pll output frequency
  ARC: [plat-axs103] refactor the quad core DT quirk code

 arch/arc/boot/dts/axc003.dtsi     |  3 +++
 arch/arc/boot/dts/axc003_idu.dtsi |  3 +++
 arch/arc/boot/dts/hsdk.dts        |  3 +++
 arch/arc/plat-axs10x/axs10x.c     | 18 ++++++++---------
 arch/arc/plat-hsdk/platform.c     | 42 ---------------------------------------
 5 files changed, 17 insertions(+), 52 deletions(-)

-- 
2.9.3

[PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Vineet Gupta]

On 11/27/2017 10:56 AM, Eugeniy Paltsev wrote:
> Set initial core pll output frequency on HSDK and AXS103 via
> "assigned-clock-rates" property in device tree.
> It will be applied at the core pll driver probing.

Can you repost - CC'ing Stephen boyd and RobH ?

-Vineet

>
> Eugeniy Paltsev (4):
>    ARC: [plat-hsdk]: Set initial core pll output frequency
>    ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
>    ARC: [plat-axs103]: Set initial core pll output frequency
>    ARC: [plat-axs103] refactor the quad core DT quirk code
>
>   arch/arc/boot/dts/axc003.dtsi     |  3 +++
>   arch/arc/boot/dts/axc003_idu.dtsi |  3 +++
>   arch/arc/boot/dts/hsdk.dts        |  3 +++
>   arch/arc/plat-axs10x/axs10x.c     | 18 ++++++++---------
>   arch/arc/plat-hsdk/platform.c     | 42 ---------------------------------------
>   5 files changed, 17 insertions(+), 52 deletions(-)
>

Re: [PATCH 0/4] ARC: Set initial core pll output frequency via DTS

[Vineet Gupta]

On 11/27/2017 10:56 AM, Eugeniy Paltsev wrote:
> Set initial core pll output frequency on HSDK and AXS103 via
> "assigned-clock-rates" property in device tree.
> It will be applied at the core pll driver probing.

Can you repost - CC'ing Stephen boyd and RobH ?

-Vineet

>
> Eugeniy Paltsev (4):
>    ARC: [plat-hsdk]: Set initial core pll output frequency
>    ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
>    ARC: [plat-axs103]: Set initial core pll output frequency
>    ARC: [plat-axs103] refactor the quad core DT quirk code
>
>   arch/arc/boot/dts/axc003.dtsi     |  3 +++
>   arch/arc/boot/dts/axc003_idu.dtsi |  3 +++
>   arch/arc/boot/dts/hsdk.dts        |  3 +++
>   arch/arc/plat-axs10x/axs10x.c     | 18 ++++++++---------
>   arch/arc/plat-hsdk/platform.c     | 42 ---------------------------------------
>   5 files changed, 17 insertions(+), 52 deletions(-)
>