Re: [PATCH v4 00/11] ASoC: fsl_ssi: Clean up - coding style level

[Nicolin Chen <nicoleotsuka@gmail.com>]

On Thu, Dec 21, 2017 at 08:10:07AM -0800, Caleb Crome wrote:

> >>> the mainline tree, I would like to treat this mail as a separate
> >>>
> >>> bug report and fix it with a separate patch.

> >>>> warn:   11a0 11a1 1160 11a3 11a4 11a5 11a6 11a7
> >>>>
> >>>> warn: Valid frame after 1 invalid frames
> >>>>
> >>>> warn:   11c0 11c1 11c2 11c3 11c4 11c5 11c6 11c7
> >>>>
> >>>> warn: first invalid frame while expecting frame 0x00a0
> >>>>
> >>>> warn:   13e7 1400 1401 1402 1403 1404 1405 1404
> >>>>
> >>>> warn:   1407 1420 1421 1422 1423 1424 1425 1426
> >>>>
> >>>> warn:   1427 1440 1441 1442 1443 1444 1445 1484
> >>>>
> >>>> warn:   1447 1460 1461 1462 1463 1464 1465 1466
> >>>>
> >>>>
> >>>> Those last 4 lines are the channel slips -- the least significant
> >>>>
> >>>> nibble should be the channel number:  i.e. should go 0, 1, 2, 3, 4, 5,
> >>>>
> >>>> 6, 7.
> >>>>
> >>>>
> >>>> Ugh, so it's basically quite broken again -- before these patches.

> Okay, operator error on my part.  There was an old clock setting in my
> ssi3 dtsi file that (falsely) modified the ssi baud clock frequency.
> Nicolin's patch
> 
>     ASoC: fsl_ssi: Caculate bit clock rate using slot number and width
> 
> now properly computes the master clock, and the old dtsi settings that
> were necessary to fake things into the right speed are now obsolete.
> 
> So... basically, everything is back to working properly.  it wasn't
> broken at all -- just my oversight on a ssi clock setting in the dtb.

Well, that's a good news :) Thanks for the efforts during these days
to track back every corner.

Happy holiday.
Nicolin