From: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] dt-bindings: Use lower case hex in unit-addresses
Date: Thu, 21 Dec 2017 12:35:22 -0600 [thread overview]
Message-ID: <20171221183522.27536-1-robh@kernel.org> (raw)
DT unit addresses should be lower case hex. Fix all the
binding examples.
Converted with the following command from Krzysztof Kozlowski:
sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')
Signed-off-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt | 6 +++---
.../devicetree/bindings/arm/samsung/samsung-boards.txt | 2 +-
Documentation/devicetree/bindings/clock/exynos3250-clock.txt | 2 +-
Documentation/devicetree/bindings/clock/exynos5260-clock.txt | 2 +-
Documentation/devicetree/bindings/clock/exynos5410-clock.txt | 2 +-
Documentation/devicetree/bindings/clock/exynos5433-clock.txt | 2 +-
Documentation/devicetree/bindings/crypto/atmel-crypto.txt | 2 +-
.../devicetree/bindings/devfreq/event/exynos-nocp.txt | 2 +-
.../devicetree/bindings/display/exynos/exynos_dsim.txt | 2 +-
Documentation/devicetree/bindings/display/st,stih4xx.txt | 2 +-
Documentation/devicetree/bindings/dma/ste-dma40.txt | 2 +-
Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio.txt | 2 +-
.../devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt | 2 +-
Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt | 2 +-
Documentation/devicetree/bindings/input/samsung-keypad.txt | 2 +-
.../bindings/input/touchscreen/brcm,iproc-touchscreen.txt | 2 +-
Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt | 2 +-
Documentation/devicetree/bindings/mailbox/omap-mailbox.txt | 2 +-
Documentation/devicetree/bindings/media/s5p-cec.txt | 2 +-
Documentation/devicetree/bindings/media/samsung-s5c73m3.txt | 2 +-
.../devicetree/bindings/memory-controllers/ti-aemif.txt | 2 +-
Documentation/devicetree/bindings/mfd/cros-ec.txt | 2 +-
Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt | 2 +-
Documentation/devicetree/bindings/net/cpsw.txt | 4 ++--
Documentation/devicetree/bindings/net/davinci-mdio.txt | 4 ++--
Documentation/devicetree/bindings/net/fsl-tsec-phy.txt | 2 +-
Documentation/devicetree/bindings/phy/ti-phy.txt | 2 +-
.../devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt | 6 +++---
.../devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt | 2 +-
.../devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt | 2 +-
Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 2 +-
.../devicetree/bindings/powerpc/fsl/interlaken-lac.txt | 12 ++++++------
.../devicetree/bindings/regulator/st,stm32-vrefbuf.txt | 2 +-
Documentation/devicetree/bindings/serial/lantiq_asc.txt | 2 +-
Documentation/devicetree/bindings/sound/img,i2s-out.txt | 2 +-
Documentation/devicetree/bindings/sound/img,parallel-out.txt | 2 +-
Documentation/devicetree/bindings/sound/img,spdif-in.txt | 2 +-
Documentation/devicetree/bindings/sound/img,spdif-out.txt | 2 +-
Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt | 8 ++++----
Documentation/devicetree/bindings/spi/spi-davinci.txt | 2 +-
Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt | 2 +-
Documentation/devicetree/bindings/thermal/exynos-thermal.txt | 2 +-
Documentation/devicetree/bindings/thermal/thermal.txt | 6 +++---
.../devicetree/bindings/timer/samsung,exynos4210-mct.txt | 2 +-
Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt | 2 +-
Documentation/devicetree/bindings/watchdog/samsung-wdt.txt | 2 +-
48 files changed, 64 insertions(+), 64 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index ccaaec6014bd..6c49db7f8ad2 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -55,7 +55,7 @@ Note: child nodes can be added for auto probing from device tree.
Example: adding device info in dtsi file
-adc: adc@12D10000 {
+adc: adc@12d10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
interrupts = <0 106 0>;
@@ -71,7 +71,7 @@ adc: adc@12D10000 {
Example: adding device info in dtsi file for Exynos3250 with additional sclk
-adc: adc@126C0000 {
+adc: adc@126c0000 {
compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
reg = <0x126C0000 0x100>;
interrupts = <0 137 0>;
@@ -87,7 +87,7 @@ adc: adc@126C0000 {
Example: Adding child nodes in dts file
-adc@12D10000 {
+adc@12d10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index e13459618581..469ac98ecf8f 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -72,7 +72,7 @@ Optional nodes:
- compatible: only "samsung,secure-firmware" is currently supported
- reg: address of non-secure SYSRAM used for communication with firmware
- firmware@203F000 {
+ firmware@203f000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};
diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
index f1738b88c225..7441ed519f02 100644
--- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
@@ -32,7 +32,7 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>;
};
- cmu_dmc: clock-controller@105C0000 {
+ cmu_dmc: clock-controller@105c0000 {
compatible = "samsung,exynos3250-cmu-dmc";
reg = <0x105C0000 0x2000>;
#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
index 5496b2fac483..c79d31f7f66e 100644
--- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
@@ -180,7 +180,7 @@ Example 2: UART controller node that consumes the clock generated by the
peri clock controller. Refer to the standard clock bindings for
information about 'clocks' and 'clock-names' property.
- serial@12C00000 {
+ serial@12c00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 146 0>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
index c68b0d29b3d0..217beb27c30e 100644
--- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
@@ -41,7 +41,7 @@ Example 2: UART controller node that consumes the clock generated by the clock
controller. Refer to the standard clock bindings for information
about 'clocks' and 'clock-names' property.
- serial@12C20000 {
+ serial@12c20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 51 0>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index c473dd38dd55..50d5897c9849 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -472,7 +472,7 @@ Example 2: Examples of clock controller nodes are listed below.
Example 3: UART controller node that consumes the clock generated by the clock
controller.
- serial_0: serial@14C10000 {
+ serial_0: serial@14c10000 {
compatible = "samsung,exynos5433-uart";
reg = <0x14C10000 0x100>;
interrupts = <0 421 0>;
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
index 7de1a9674c70..6b458bb2440d 100644
--- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
+++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
@@ -75,7 +75,7 @@ Required properties:
- clock-frequency: must be present in the i2c controller node.
Example:
-atecc508a@C0 {
+atecc508a@c0 {
compatible = "atmel,atecc508a";
reg = <0xC0>;
};
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
index fd459f00aa5a..aeaebd425d1f 100644
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
@@ -20,7 +20,7 @@ Optional properties:
Example : NoC Probe nodes in Device Tree are listed below.
- nocp_mem0_0: nocp@10CA1000 {
+ nocp_mem0_0: nocp@10ca1000 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1000 0x200>;
};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index ca5204b3bc21..2fff8b406f4c 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -54,7 +54,7 @@ Video interfaces:
Example:
- dsi@11C80000 {
+ dsi@11c80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
interrupts = <0 79 0>;
diff --git a/Documentation/devicetree/bindings/display/st,stih4xx.txt b/Documentation/devicetree/bindings/display/st,stih4xx.txt
index a352ed30cd70..6778b3e7ad5b 100644
--- a/Documentation/devicetree/bindings/display/st,stih4xx.txt
+++ b/Documentation/devicetree/bindings/display/st,stih4xx.txt
@@ -119,7 +119,7 @@ Example:
/ {
...
- vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+ vtg_main_slave: sti-vtg-main-slave@fe85a800 {
compatible = "st,vtg";
reg = <0xfe85A800 0x300>;
interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>;
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
index aa7dbd565ad0..99ab5c4d331e 100644
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -15,7 +15,7 @@ Optional properties:
Example:
- dma: dma-controller@801C0000 {
+ dma: dma-controller@801c0000 {
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
reg-names = "base", "lcpa";
diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
index 00611aceed3e..a25c87b650e5 100644
--- a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/gpio/gpio.txt
Example:
- gpioa: gpio@FF140000 {
+ gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
index 854de130a971..78458adbf4b7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
@@ -27,7 +27,7 @@ Optional properties:
Example:
-gpio1: stp@E100BB0 {
+gpio1: stp@e100bb0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index 802402f6cc5d..b5de08e3b1a2 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -290,7 +290,7 @@ pins 50..69.
Example 2:
- gpio_pio_i: gpio-controller@14B0 {
+ gpio_pio_i: gpio-controller@14b0 {
#gpio-cells = <2>;
compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
reg = <0x1480 0x18>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
index 248a155414c2..548a73cde796 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
@@ -54,7 +54,7 @@ Optional properties:
Example:
- i2c@12CA0000 {
+ i2c@12ca0000 {
compatible = "acme,some-i2c-device";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
index 70c054a9a997..60fe90d69f4e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
@@ -11,7 +11,7 @@ Required properties:
Examples:
-lpi2c7: lpi2c7@40A50000 {
+lpi2c7: lpi2c7@40a50000 {
compatible = "fsl,imx8dv-lpi2c";
reg = <0x40A50000 0x10000>;
interrupt-parent = <&intc>;
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index 5305e74e5742..4c5c0a82586d 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -45,7 +45,7 @@ Optional Properties specific to linux:
Example:
- keypad@100A0000 {
+ keypad@100a0000 {
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <173>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
index ac5dff412e25..f127a2117072 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
@@ -66,7 +66,7 @@ Example: An example of touchscreen node
reg = <0x180a6000 0xc30>;
};
- touchscreen: touchscreen@180A6000 {
+ touchscreen: touchscreen@180a6000 {
compatible = "brcm,iproc-touchscreen";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
index 85f068805dd8..b1682c80b490 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
@@ -56,7 +56,7 @@ Examples:
iommus = <&sysmmu_gsc0>;
};
- sysmmu_gsc0: sysmmu@13E80000 {
+ sysmmu_gsc0: sysmmu@13e80000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E80000 0x1000>;
interrupt-parent = <&combiner>;
diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
index 9b40c4925aa9..0ef372656a3e 100644
--- a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
@@ -124,7 +124,7 @@ dsp {
};
/* AM33xx */
-mailbox: mailbox@480C8000 {
+mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <77>;
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
index 6f3756da900f..e847291d4aff 100644
--- a/Documentation/devicetree/bindings/media/s5p-cec.txt
+++ b/Documentation/devicetree/bindings/media/s5p-cec.txt
@@ -23,7 +23,7 @@ Optional:
Example:
-hdmicec: cec@100B0000 {
+hdmicec: cec@100b0000 {
compatible = "samsung,s5p-cec";
reg = <0x100B0000 0x200>;
interrupts = <0 114 0>;
diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
index 2c85c4538a6d..21f31fdf5543 100644
--- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
+++ b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
@@ -62,7 +62,7 @@ For more details see description of the SPI busses bindings
Example:
-i2c@138A000000 {
+i2c@138a000000 {
...
s5c73m3@3c {
compatible = "samsung,s5c73m3";
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
index 9592717f483f..190437a0c146 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
@@ -138,7 +138,7 @@ from the corresponding HW reg.
Example for aemif, davinci nand and nor flash chip select shown below.
-memory-controller@21000A00 {
+memory-controller@21000a00 {
compatible = "ti,davinci-aemif";
#address-cells = <2>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index 136e0c2da44d..6245c9b1a68b 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -41,7 +41,7 @@ Optional properties (all):
Example for I2C:
-i2c@12CA0000 {
+i2c@12ca0000 {
cros-ec@1e {
reg = <0x1e>;
compatible = "google,cros-ec-i2c";
diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
index d0a37252eb22..6d60bc3063f5 100644
--- a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
+++ b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
@@ -23,7 +23,7 @@ Optional subnodes:
Example:
- mlc: flash@200A8000 {
+ mlc: flash@200a8000 {
compatible = "nxp,lpc3220-mlc";
reg = <0x200A8000 0x11000>;
interrupts = <11 0>;
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 7cc15c96ea95..4cb4925a28ab 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -61,7 +61,7 @@ file.
Examples:
- mac: ethernet@4A100000 {
+ mac: ethernet@4a100000 {
compatible = "ti,cpsw";
reg = <0x4A100000 0x1000>;
interrupts = <55 0x4>;
@@ -91,7 +91,7 @@ Examples:
};
(or)
- mac: ethernet@4A100000 {
+ mac: ethernet@4a100000 {
compatible = "ti,cpsw";
ti,hwmods = "cpgmac0";
cpdma_channels = <8>;
diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt
index 621156ca4ffd..e6527de80f10 100644
--- a/Documentation/devicetree/bindings/net/davinci-mdio.txt
+++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt
@@ -21,7 +21,7 @@ file.
Examples:
- mdio: davinci_mdio@4A101000 {
+ mdio: davinci_mdio@4a101000 {
compatible = "ti,davinci_mdio";
reg = <0x4A101000 0x1000>;
bus_freq = <1000000>;
@@ -29,7 +29,7 @@ Examples:
(or)
- mdio: davinci_mdio@4A101000 {
+ mdio: davinci_mdio@4a101000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index db74f0dc290c..594982c6b9f9 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -136,7 +136,7 @@ Clock Properties:
Example:
- ptp_clock@24E00 {
+ ptp_clock@24e00 {
compatible = "fsl,etsec-ptp";
reg = <0x24E00 0xB0>;
interrupts = <12 0x8 13 0x8>;
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index cd13e6157088..57dfda8a7a1d 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -120,7 +120,7 @@ usb3phy@4a084400 {
"refclk";
};
-sata_phy: phy@4A096000 {
+sata_phy: phy@4a096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
diff --git a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
index 2c11866221c2..c591b9cb5ba0 100644
--- a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
@@ -49,7 +49,7 @@ explained in Documentation/devicetree/bindings/gpio/gpio.txt.
Example
-------
-iomux: iomux@FF10601c {
+iomux: iomux@ff10601c {
compatible = "abilis,tb10x-iomux";
reg = <0xFF10601c 0x4>;
pctl_gpio_a: pctl-gpio-a {
@@ -59,7 +59,7 @@ iomux: iomux@FF10601c {
abilis,function = "uart0";
};
};
-uart@FF100000 {
+uart@ff100000 {
compatible = "snps,dw-apb-uart";
reg = <0xFF100000 0x100>;
clock-frequency = <166666666>;
@@ -69,7 +69,7 @@ uart@FF100000 {
pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
-gpioa: gpio@FF140000 {
+gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio";
reg = <0xFF140000 0x1000>;
gpio-controller;
diff --git a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
index 0326154c7925..a72dc3178179 100644
--- a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
@@ -152,7 +152,7 @@ resetn
Example:
--------
-pinctrl@18101C00 {
+pinctrl@18101c00 {
compatible = "img,pistachio-system-pinctrl";
reg = <0x18101C00 0x400>;
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
index 8e5216bcd748..4658f105fa09 100644
--- a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
@@ -163,7 +163,7 @@ Valid values for xRX300 pin names:
io42-io43,io48-io61.
Example:
- gpio: pinmux@E100B10 {
+ gpio: pinmux@e100b10 {
compatible = "lantiq,danube-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
index 231fa1db7c5e..afa8a18ea11a 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
@@ -81,7 +81,7 @@ Examples:
reg = <0 0x10005000 0 0x1000>;
};
- syscfg_pctl_b: syscfg_pctl_b@1020C020 {
+ syscfg_pctl_b: syscfg_pctl_b@1020c020 {
compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
reg = <0 0x1020C020 0 0x1000>;
};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
index 641bc13983e1..ed6a414b2e10 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
@@ -223,37 +223,37 @@ lac-portals {
reg = <0x9000 0x1000>;
};
- lportal10: lac-portal@A000 {
+ lportal10: lac-portal@a000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x20E>;
reg = <0xA000 0x1000>;
};
- lportal11: lac-portal@B000 {
+ lportal11: lac-portal@b000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x20F>;
reg = <0xB000 0x1000>;
};
- lportal12: lac-portal@C000 {
+ lportal12: lac-portal@c000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x210>;
reg = <0xC000 0x1000>;
};
- lportal13: lac-portal@D000 {
+ lportal13: lac-portal@d000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x211>;
reg = <0xD000 0x1000>;
};
- lportal14: lac-portal@E000 {
+ lportal14: lac-portal@e000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x212>;
reg = <0xE000 0x1000>;
};
- lportal15: lac-portal@F000 {
+ lportal15: lac-portal@f000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x213>;
reg = <0xF000 0x1000>;
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
index 3944ee3e731e..5ddb8500a929 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
@@ -10,7 +10,7 @@ Required properties:
- clocks: Must contain an entry for peripheral clock.
Example:
- vrefbuf: regulator@58003C00 {
+ vrefbuf: regulator@58003c00 {
compatible = "st,stm32-vrefbuf";
reg = <0x58003C00 0x8>;
clocks = <&rcc VREF_CK>;
diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
index 5b78591aaa46..3acbd309ab9d 100644
--- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -8,7 +8,7 @@ Required properties:
Example:
-asc1: serial@E100C00 {
+asc1: serial@e100c00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
diff --git a/Documentation/devicetree/bindings/sound/img,i2s-out.txt b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
index 0159415b3338..6b0ee9b7e11b 100644
--- a/Documentation/devicetree/bindings/sound/img,i2s-out.txt
+++ b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
@@ -35,7 +35,7 @@ Optional Properties:
Example:
-i2s_out: i2s-out@18100A00 {
+i2s_out: i2s-out@18100a00 {
compatible = "img,i2s-out";
reg = <0x18100A00 0x200>;
interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/img,parallel-out.txt b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
index a3015d2a06e0..37a3f94cc126 100644
--- a/Documentation/devicetree/bindings/sound/img,parallel-out.txt
+++ b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
@@ -29,7 +29,7 @@ Optional Properties:
Example:
-parallel_out: parallel-out@18100C00 {
+parallel_out: parallel-out@18100c00 {
compatible = "img,parallel-out";
reg = <0x18100C00 0x100>;
interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-in.txt b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
index aab9a81f7e13..f7ea8c87bf34 100644
--- a/Documentation/devicetree/bindings/sound/img,spdif-in.txt
+++ b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
@@ -29,7 +29,7 @@ Optional Properties:
Example:
-spdif_in: spdif-in@18100E00 {
+spdif_in: spdif-in@18100e00 {
compatible = "img,spdif-in";
reg = <0x18100E00 0x100>;
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-out.txt b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
index 470a5191e101..413ed8b01870 100644
--- a/Documentation/devicetree/bindings/sound/img,spdif-out.txt
+++ b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
@@ -29,7 +29,7 @@ Optional Properties:
Example:
-spdif_out: spdif-out@18100D00 {
+spdif_out: spdif-out@18100d00 {
compatible = "img,spdif-out";
reg = <0x18100D00 0x100>;
interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
index 9c1ee52fed5b..4d51f3f5ea98 100644
--- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -51,7 +51,7 @@ Optional properties:
Example:
- sti_uni_player1: sti-uni-player@8D81000 {
+ sti_uni_player1: sti-uni-player@8d81000 {
compatible = "st,stih407-uni-player-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@@ -63,7 +63,7 @@ Example:
st,tdm-mode = <1>;
};
- sti_uni_player2: sti-uni-player@8D82000 {
+ sti_uni_player2: sti-uni-player@8d82000 {
compatible = "st,stih407-uni-player-pcm-out";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@@ -74,7 +74,7 @@ Example:
dma-names = "tx";
};
- sti_uni_player3: sti-uni-player@8D85000 {
+ sti_uni_player3: sti-uni-player@8d85000 {
compatible = "st,stih407-uni-player-spdif";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@@ -85,7 +85,7 @@ Example:
dma-names = "tx";
};
- sti_uni_reader1: sti-uni-reader@8D84000 {
+ sti_uni_reader1: sti-uni-reader@8d84000 {
compatible = "st,stih407-uni-reader-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 1925277bfc1e..9f5b4c7c0c08 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -68,7 +68,7 @@ SPI_SOMI/SIMO+-----------------+ +-----------
Example of a NOR flash slave device (n25q032) connected to DaVinci
SPI controller device over the SPI bus.
-spi0:spi@20BF0000 {
+spi0:spi@20bf0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,dm6446-spi";
diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
index 6069b95a883d..ce3230c8e28d 100644
--- a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -16,7 +16,7 @@ Optional properties:
Example:
-spi: spi@E100800 {
+spi: spi@e100800 {
compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 9b4c7b017495..1b596fd38dc4 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -70,7 +70,7 @@ Following properties are mandatory (depending on SoC):
Example 1):
- tmu@100C0000 {
+ tmu@100c0000 {
compatible = "samsung,exynos4412-tmu";
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index 44d7cb2cb2c0..1719d47a5e2f 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -252,7 +252,7 @@ ocp {
/*
* A simple IC with a single bandgap temperature sensor.
*/
- bandgap0: bandgap@0000ED00 {
+ bandgap0: bandgap@0000ed00 {
...
#thermal-sensor-cells = <0>;
};
@@ -330,7 +330,7 @@ ocp {
/*
* A simple IC with several bandgap temperature sensors.
*/
- bandgap0: bandgap@0000ED00 {
+ bandgap0: bandgap@0000ed00 {
...
#thermal-sensor-cells = <1>;
};
@@ -458,7 +458,7 @@ ocp {
/*
* A simple IC with a single bandgap temperature sensor.
*/
- bandgap0: bandgap@0000ED00 {
+ bandgap0: bandgap@0000ed00 {
...
#thermal-sensor-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
index 167d5dab9f64..8f78640ad64c 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
@@ -51,7 +51,7 @@ Example 2: In this example, the timer interrupts are connected to two separate
interrupt controllers. Hence, an interrupt-map is created to map
the interrupts to the respective interrupt controllers.
- mct@101C0000 {
+ mct@101c0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-parent = <&mct_map>;
diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
index 556d06c17c92..4b76bec62af9 100644
--- a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
@@ -10,7 +10,7 @@ Optional properties:
Example:
- watchdog@4003C000 {
+ watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
timeout-sec = <10>;
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
index 1f6e101e299a..46dcb48e75b4 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -25,7 +25,7 @@ Optional properties:
Example:
-watchdog@101D0000 {
+watchdog@101d0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] dt-bindings: Use lower case hex in unit-addresses
Date: Thu, 21 Dec 2017 12:35:22 -0600 [thread overview]
Message-ID: <20171221183522.27536-1-robh@kernel.org> (raw)
DT unit addresses should be lower case hex. Fix all the
binding examples.
Converted with the following command from Krzysztof Kozlowski:
sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')
Signed-off-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt | 6 +++---
.../devicetree/bindings/arm/samsung/samsung-boards.txt | 2 +-
Documentation/devicetree/bindings/clock/exynos3250-clock.txt | 2 +-
Documentation/devicetree/bindings/clock/exynos5260-clock.txt | 2 +-
Documentation/devicetree/bindings/clock/exynos5410-clock.txt | 2 +-
Documentation/devicetree/bindings/clock/exynos5433-clock.txt | 2 +-
Documentation/devicetree/bindings/crypto/atmel-crypto.txt | 2 +-
.../devicetree/bindings/devfreq/event/exynos-nocp.txt | 2 +-
.../devicetree/bindings/display/exynos/exynos_dsim.txt | 2 +-
Documentation/devicetree/bindings/display/st,stih4xx.txt | 2 +-
Documentation/devicetree/bindings/dma/ste-dma40.txt | 2 +-
Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio.txt | 2 +-
.../devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt | 2 +-
Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt | 2 +-
Documentation/devicetree/bindings/input/samsung-keypad.txt | 2 +-
.../bindings/input/touchscreen/brcm,iproc-touchscreen.txt | 2 +-
Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt | 2 +-
Documentation/devicetree/bindings/mailbox/omap-mailbox.txt | 2 +-
Documentation/devicetree/bindings/media/s5p-cec.txt | 2 +-
Documentation/devicetree/bindings/media/samsung-s5c73m3.txt | 2 +-
.../devicetree/bindings/memory-controllers/ti-aemif.txt | 2 +-
Documentation/devicetree/bindings/mfd/cros-ec.txt | 2 +-
Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt | 2 +-
Documentation/devicetree/bindings/net/cpsw.txt | 4 ++--
Documentation/devicetree/bindings/net/davinci-mdio.txt | 4 ++--
Documentation/devicetree/bindings/net/fsl-tsec-phy.txt | 2 +-
Documentation/devicetree/bindings/phy/ti-phy.txt | 2 +-
.../devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt | 6 +++---
.../devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt | 2 +-
.../devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt | 2 +-
Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 2 +-
.../devicetree/bindings/powerpc/fsl/interlaken-lac.txt | 12 ++++++------
.../devicetree/bindings/regulator/st,stm32-vrefbuf.txt | 2 +-
Documentation/devicetree/bindings/serial/lantiq_asc.txt | 2 +-
Documentation/devicetree/bindings/sound/img,i2s-out.txt | 2 +-
Documentation/devicetree/bindings/sound/img,parallel-out.txt | 2 +-
Documentation/devicetree/bindings/sound/img,spdif-in.txt | 2 +-
Documentation/devicetree/bindings/sound/img,spdif-out.txt | 2 +-
Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt | 8 ++++----
Documentation/devicetree/bindings/spi/spi-davinci.txt | 2 +-
Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt | 2 +-
Documentation/devicetree/bindings/thermal/exynos-thermal.txt | 2 +-
Documentation/devicetree/bindings/thermal/thermal.txt | 6 +++---
.../devicetree/bindings/timer/samsung,exynos4210-mct.txt | 2 +-
Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt | 2 +-
Documentation/devicetree/bindings/watchdog/samsung-wdt.txt | 2 +-
48 files changed, 64 insertions(+), 64 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index ccaaec6014bd..6c49db7f8ad2 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -55,7 +55,7 @@ Note: child nodes can be added for auto probing from device tree.
Example: adding device info in dtsi file
-adc: adc@12D10000 {
+adc: adc@12d10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
interrupts = <0 106 0>;
@@ -71,7 +71,7 @@ adc: adc@12D10000 {
Example: adding device info in dtsi file for Exynos3250 with additional sclk
-adc: adc@126C0000 {
+adc: adc@126c0000 {
compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
reg = <0x126C0000 0x100>;
interrupts = <0 137 0>;
@@ -87,7 +87,7 @@ adc: adc@126C0000 {
Example: Adding child nodes in dts file
-adc@12D10000 {
+adc@12d10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index e13459618581..469ac98ecf8f 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -72,7 +72,7 @@ Optional nodes:
- compatible: only "samsung,secure-firmware" is currently supported
- reg: address of non-secure SYSRAM used for communication with firmware
- firmware@203F000 {
+ firmware@203f000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};
diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
index f1738b88c225..7441ed519f02 100644
--- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
@@ -32,7 +32,7 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>;
};
- cmu_dmc: clock-controller@105C0000 {
+ cmu_dmc: clock-controller@105c0000 {
compatible = "samsung,exynos3250-cmu-dmc";
reg = <0x105C0000 0x2000>;
#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
index 5496b2fac483..c79d31f7f66e 100644
--- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
@@ -180,7 +180,7 @@ Example 2: UART controller node that consumes the clock generated by the
peri clock controller. Refer to the standard clock bindings for
information about 'clocks' and 'clock-names' property.
- serial@12C00000 {
+ serial@12c00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 146 0>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
index c68b0d29b3d0..217beb27c30e 100644
--- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
@@ -41,7 +41,7 @@ Example 2: UART controller node that consumes the clock generated by the clock
controller. Refer to the standard clock bindings for information
about 'clocks' and 'clock-names' property.
- serial@12C20000 {
+ serial@12c20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 51 0>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index c473dd38dd55..50d5897c9849 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -472,7 +472,7 @@ Example 2: Examples of clock controller nodes are listed below.
Example 3: UART controller node that consumes the clock generated by the clock
controller.
- serial_0: serial@14C10000 {
+ serial_0: serial@14c10000 {
compatible = "samsung,exynos5433-uart";
reg = <0x14C10000 0x100>;
interrupts = <0 421 0>;
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
index 7de1a9674c70..6b458bb2440d 100644
--- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
+++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
@@ -75,7 +75,7 @@ Required properties:
- clock-frequency: must be present in the i2c controller node.
Example:
-atecc508a@C0 {
+atecc508a@c0 {
compatible = "atmel,atecc508a";
reg = <0xC0>;
};
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
index fd459f00aa5a..aeaebd425d1f 100644
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
@@ -20,7 +20,7 @@ Optional properties:
Example : NoC Probe nodes in Device Tree are listed below.
- nocp_mem0_0: nocp@10CA1000 {
+ nocp_mem0_0: nocp@10ca1000 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1000 0x200>;
};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index ca5204b3bc21..2fff8b406f4c 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -54,7 +54,7 @@ Video interfaces:
Example:
- dsi@11C80000 {
+ dsi@11c80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
interrupts = <0 79 0>;
diff --git a/Documentation/devicetree/bindings/display/st,stih4xx.txt b/Documentation/devicetree/bindings/display/st,stih4xx.txt
index a352ed30cd70..6778b3e7ad5b 100644
--- a/Documentation/devicetree/bindings/display/st,stih4xx.txt
+++ b/Documentation/devicetree/bindings/display/st,stih4xx.txt
@@ -119,7 +119,7 @@ Example:
/ {
...
- vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+ vtg_main_slave: sti-vtg-main-slave@fe85a800 {
compatible = "st,vtg";
reg = <0xfe85A800 0x300>;
interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>;
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
index aa7dbd565ad0..99ab5c4d331e 100644
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -15,7 +15,7 @@ Optional properties:
Example:
- dma: dma-controller@801C0000 {
+ dma: dma-controller@801c0000 {
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
reg-names = "base", "lcpa";
diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
index 00611aceed3e..a25c87b650e5 100644
--- a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/gpio/gpio.txt
Example:
- gpioa: gpio@FF140000 {
+ gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
index 854de130a971..78458adbf4b7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
@@ -27,7 +27,7 @@ Optional properties:
Example:
-gpio1: stp@E100BB0 {
+gpio1: stp@e100bb0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index 802402f6cc5d..b5de08e3b1a2 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -290,7 +290,7 @@ pins 50..69.
Example 2:
- gpio_pio_i: gpio-controller@14B0 {
+ gpio_pio_i: gpio-controller@14b0 {
#gpio-cells = <2>;
compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
reg = <0x1480 0x18>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
index 248a155414c2..548a73cde796 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
@@ -54,7 +54,7 @@ Optional properties:
Example:
- i2c@12CA0000 {
+ i2c@12ca0000 {
compatible = "acme,some-i2c-device";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
index 70c054a9a997..60fe90d69f4e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
@@ -11,7 +11,7 @@ Required properties:
Examples:
-lpi2c7: lpi2c7@40A50000 {
+lpi2c7: lpi2c7@40a50000 {
compatible = "fsl,imx8dv-lpi2c";
reg = <0x40A50000 0x10000>;
interrupt-parent = <&intc>;
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index 5305e74e5742..4c5c0a82586d 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -45,7 +45,7 @@ Optional Properties specific to linux:
Example:
- keypad@100A0000 {
+ keypad@100a0000 {
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <173>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
index ac5dff412e25..f127a2117072 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
@@ -66,7 +66,7 @@ Example: An example of touchscreen node
reg = <0x180a6000 0xc30>;
};
- touchscreen: touchscreen@180A6000 {
+ touchscreen: touchscreen@180a6000 {
compatible = "brcm,iproc-touchscreen";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
index 85f068805dd8..b1682c80b490 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
@@ -56,7 +56,7 @@ Examples:
iommus = <&sysmmu_gsc0>;
};
- sysmmu_gsc0: sysmmu@13E80000 {
+ sysmmu_gsc0: sysmmu@13e80000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E80000 0x1000>;
interrupt-parent = <&combiner>;
diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
index 9b40c4925aa9..0ef372656a3e 100644
--- a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
@@ -124,7 +124,7 @@ dsp {
};
/* AM33xx */
-mailbox: mailbox@480C8000 {
+mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <77>;
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
index 6f3756da900f..e847291d4aff 100644
--- a/Documentation/devicetree/bindings/media/s5p-cec.txt
+++ b/Documentation/devicetree/bindings/media/s5p-cec.txt
@@ -23,7 +23,7 @@ Optional:
Example:
-hdmicec: cec@100B0000 {
+hdmicec: cec@100b0000 {
compatible = "samsung,s5p-cec";
reg = <0x100B0000 0x200>;
interrupts = <0 114 0>;
diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
index 2c85c4538a6d..21f31fdf5543 100644
--- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
+++ b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
@@ -62,7 +62,7 @@ For more details see description of the SPI busses bindings
Example:
-i2c@138A000000 {
+i2c@138a000000 {
...
s5c73m3@3c {
compatible = "samsung,s5c73m3";
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
index 9592717f483f..190437a0c146 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
@@ -138,7 +138,7 @@ from the corresponding HW reg.
Example for aemif, davinci nand and nor flash chip select shown below.
-memory-controller@21000A00 {
+memory-controller@21000a00 {
compatible = "ti,davinci-aemif";
#address-cells = <2>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index 136e0c2da44d..6245c9b1a68b 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -41,7 +41,7 @@ Optional properties (all):
Example for I2C:
-i2c@12CA0000 {
+i2c@12ca0000 {
cros-ec@1e {
reg = <0x1e>;
compatible = "google,cros-ec-i2c";
diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
index d0a37252eb22..6d60bc3063f5 100644
--- a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
+++ b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
@@ -23,7 +23,7 @@ Optional subnodes:
Example:
- mlc: flash@200A8000 {
+ mlc: flash@200a8000 {
compatible = "nxp,lpc3220-mlc";
reg = <0x200A8000 0x11000>;
interrupts = <11 0>;
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 7cc15c96ea95..4cb4925a28ab 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -61,7 +61,7 @@ file.
Examples:
- mac: ethernet@4A100000 {
+ mac: ethernet@4a100000 {
compatible = "ti,cpsw";
reg = <0x4A100000 0x1000>;
interrupts = <55 0x4>;
@@ -91,7 +91,7 @@ Examples:
};
(or)
- mac: ethernet@4A100000 {
+ mac: ethernet@4a100000 {
compatible = "ti,cpsw";
ti,hwmods = "cpgmac0";
cpdma_channels = <8>;
diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt
index 621156ca4ffd..e6527de80f10 100644
--- a/Documentation/devicetree/bindings/net/davinci-mdio.txt
+++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt
@@ -21,7 +21,7 @@ file.
Examples:
- mdio: davinci_mdio@4A101000 {
+ mdio: davinci_mdio@4a101000 {
compatible = "ti,davinci_mdio";
reg = <0x4A101000 0x1000>;
bus_freq = <1000000>;
@@ -29,7 +29,7 @@ Examples:
(or)
- mdio: davinci_mdio@4A101000 {
+ mdio: davinci_mdio@4a101000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index db74f0dc290c..594982c6b9f9 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -136,7 +136,7 @@ Clock Properties:
Example:
- ptp_clock@24E00 {
+ ptp_clock@24e00 {
compatible = "fsl,etsec-ptp";
reg = <0x24E00 0xB0>;
interrupts = <12 0x8 13 0x8>;
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index cd13e6157088..57dfda8a7a1d 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -120,7 +120,7 @@ usb3phy@4a084400 {
"refclk";
};
-sata_phy: phy@4A096000 {
+sata_phy: phy@4a096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
diff --git a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
index 2c11866221c2..c591b9cb5ba0 100644
--- a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
@@ -49,7 +49,7 @@ explained in Documentation/devicetree/bindings/gpio/gpio.txt.
Example
-------
-iomux: iomux@FF10601c {
+iomux: iomux@ff10601c {
compatible = "abilis,tb10x-iomux";
reg = <0xFF10601c 0x4>;
pctl_gpio_a: pctl-gpio-a {
@@ -59,7 +59,7 @@ iomux: iomux@FF10601c {
abilis,function = "uart0";
};
};
-uart@FF100000 {
+uart@ff100000 {
compatible = "snps,dw-apb-uart";
reg = <0xFF100000 0x100>;
clock-frequency = <166666666>;
@@ -69,7 +69,7 @@ uart@FF100000 {
pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
-gpioa: gpio@FF140000 {
+gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio";
reg = <0xFF140000 0x1000>;
gpio-controller;
diff --git a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
index 0326154c7925..a72dc3178179 100644
--- a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
@@ -152,7 +152,7 @@ resetn
Example:
--------
-pinctrl@18101C00 {
+pinctrl@18101c00 {
compatible = "img,pistachio-system-pinctrl";
reg = <0x18101C00 0x400>;
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
index 8e5216bcd748..4658f105fa09 100644
--- a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
@@ -163,7 +163,7 @@ Valid values for xRX300 pin names:
io42-io43,io48-io61.
Example:
- gpio: pinmux@E100B10 {
+ gpio: pinmux@e100b10 {
compatible = "lantiq,danube-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
index 231fa1db7c5e..afa8a18ea11a 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
@@ -81,7 +81,7 @@ Examples:
reg = <0 0x10005000 0 0x1000>;
};
- syscfg_pctl_b: syscfg_pctl_b@1020C020 {
+ syscfg_pctl_b: syscfg_pctl_b@1020c020 {
compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
reg = <0 0x1020C020 0 0x1000>;
};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
index 641bc13983e1..ed6a414b2e10 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
@@ -223,37 +223,37 @@ lac-portals {
reg = <0x9000 0x1000>;
};
- lportal10: lac-portal@A000 {
+ lportal10: lac-portal@a000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x20E>;
reg = <0xA000 0x1000>;
};
- lportal11: lac-portal@B000 {
+ lportal11: lac-portal@b000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x20F>;
reg = <0xB000 0x1000>;
};
- lportal12: lac-portal@C000 {
+ lportal12: lac-portal@c000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x210>;
reg = <0xC000 0x1000>;
};
- lportal13: lac-portal@D000 {
+ lportal13: lac-portal@d000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x211>;
reg = <0xD000 0x1000>;
};
- lportal14: lac-portal@E000 {
+ lportal14: lac-portal@e000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x212>;
reg = <0xE000 0x1000>;
};
- lportal15: lac-portal@F000 {
+ lportal15: lac-portal@f000 {
compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x213>;
reg = <0xF000 0x1000>;
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
index 3944ee3e731e..5ddb8500a929 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
@@ -10,7 +10,7 @@ Required properties:
- clocks: Must contain an entry for peripheral clock.
Example:
- vrefbuf: regulator@58003C00 {
+ vrefbuf: regulator@58003c00 {
compatible = "st,stm32-vrefbuf";
reg = <0x58003C00 0x8>;
clocks = <&rcc VREF_CK>;
diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
index 5b78591aaa46..3acbd309ab9d 100644
--- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -8,7 +8,7 @@ Required properties:
Example:
-asc1: serial@E100C00 {
+asc1: serial@e100c00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
diff --git a/Documentation/devicetree/bindings/sound/img,i2s-out.txt b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
index 0159415b3338..6b0ee9b7e11b 100644
--- a/Documentation/devicetree/bindings/sound/img,i2s-out.txt
+++ b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
@@ -35,7 +35,7 @@ Optional Properties:
Example:
-i2s_out: i2s-out@18100A00 {
+i2s_out: i2s-out@18100a00 {
compatible = "img,i2s-out";
reg = <0x18100A00 0x200>;
interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/img,parallel-out.txt b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
index a3015d2a06e0..37a3f94cc126 100644
--- a/Documentation/devicetree/bindings/sound/img,parallel-out.txt
+++ b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
@@ -29,7 +29,7 @@ Optional Properties:
Example:
-parallel_out: parallel-out@18100C00 {
+parallel_out: parallel-out@18100c00 {
compatible = "img,parallel-out";
reg = <0x18100C00 0x100>;
interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-in.txt b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
index aab9a81f7e13..f7ea8c87bf34 100644
--- a/Documentation/devicetree/bindings/sound/img,spdif-in.txt
+++ b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
@@ -29,7 +29,7 @@ Optional Properties:
Example:
-spdif_in: spdif-in@18100E00 {
+spdif_in: spdif-in@18100e00 {
compatible = "img,spdif-in";
reg = <0x18100E00 0x100>;
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-out.txt b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
index 470a5191e101..413ed8b01870 100644
--- a/Documentation/devicetree/bindings/sound/img,spdif-out.txt
+++ b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
@@ -29,7 +29,7 @@ Optional Properties:
Example:
-spdif_out: spdif-out@18100D00 {
+spdif_out: spdif-out@18100d00 {
compatible = "img,spdif-out";
reg = <0x18100D00 0x100>;
interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
index 9c1ee52fed5b..4d51f3f5ea98 100644
--- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -51,7 +51,7 @@ Optional properties:
Example:
- sti_uni_player1: sti-uni-player@8D81000 {
+ sti_uni_player1: sti-uni-player@8d81000 {
compatible = "st,stih407-uni-player-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@@ -63,7 +63,7 @@ Example:
st,tdm-mode = <1>;
};
- sti_uni_player2: sti-uni-player@8D82000 {
+ sti_uni_player2: sti-uni-player@8d82000 {
compatible = "st,stih407-uni-player-pcm-out";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@@ -74,7 +74,7 @@ Example:
dma-names = "tx";
};
- sti_uni_player3: sti-uni-player@8D85000 {
+ sti_uni_player3: sti-uni-player@8d85000 {
compatible = "st,stih407-uni-player-spdif";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@@ -85,7 +85,7 @@ Example:
dma-names = "tx";
};
- sti_uni_reader1: sti-uni-reader@8D84000 {
+ sti_uni_reader1: sti-uni-reader@8d84000 {
compatible = "st,stih407-uni-reader-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 1925277bfc1e..9f5b4c7c0c08 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -68,7 +68,7 @@ SPI_SOMI/SIMO+-----------------+ +-----------
Example of a NOR flash slave device (n25q032) connected to DaVinci
SPI controller device over the SPI bus.
-spi0:spi@20BF0000 {
+spi0:spi@20bf0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,dm6446-spi";
diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
index 6069b95a883d..ce3230c8e28d 100644
--- a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -16,7 +16,7 @@ Optional properties:
Example:
-spi: spi@E100800 {
+spi: spi@e100800 {
compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 9b4c7b017495..1b596fd38dc4 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -70,7 +70,7 @@ Following properties are mandatory (depending on SoC):
Example 1):
- tmu@100C0000 {
+ tmu@100c0000 {
compatible = "samsung,exynos4412-tmu";
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index 44d7cb2cb2c0..1719d47a5e2f 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -252,7 +252,7 @@ ocp {
/*
* A simple IC with a single bandgap temperature sensor.
*/
- bandgap0: bandgap@0000ED00 {
+ bandgap0: bandgap@0000ed00 {
...
#thermal-sensor-cells = <0>;
};
@@ -330,7 +330,7 @@ ocp {
/*
* A simple IC with several bandgap temperature sensors.
*/
- bandgap0: bandgap@0000ED00 {
+ bandgap0: bandgap@0000ed00 {
...
#thermal-sensor-cells = <1>;
};
@@ -458,7 +458,7 @@ ocp {
/*
* A simple IC with a single bandgap temperature sensor.
*/
- bandgap0: bandgap@0000ED00 {
+ bandgap0: bandgap@0000ed00 {
...
#thermal-sensor-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
index 167d5dab9f64..8f78640ad64c 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
@@ -51,7 +51,7 @@ Example 2: In this example, the timer interrupts are connected to two separate
interrupt controllers. Hence, an interrupt-map is created to map
the interrupts to the respective interrupt controllers.
- mct@101C0000 {
+ mct@101c0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-parent = <&mct_map>;
diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
index 556d06c17c92..4b76bec62af9 100644
--- a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
@@ -10,7 +10,7 @@ Optional properties:
Example:
- watchdog@4003C000 {
+ watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
timeout-sec = <10>;
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
index 1f6e101e299a..46dcb48e75b4 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -25,7 +25,7 @@ Optional properties:
Example:
-watchdog@101D0000 {
+watchdog@101d0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
--
2.14.1
next reply other threads:[~2017-12-21 18:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-21 18:35 Rob Herring [this message]
2017-12-21 18:35 ` [PATCH] dt-bindings: Use lower case hex in unit-addresses Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171221183522.27536-1-robh@kernel.org \
--to=robh-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.