From: Mike Snitzer <snitzer@redhat.com>
To: axboe@kernel.dk, hch@lst.de, keith.busch@intel.com
Cc: emilne@redhat.com, james.smart@broadcom.com, hare@suse.de,
Bart.VanAssche@wdc.com, linux-block@vger.kernel.org,
linux-nvme@lists.infradead.org, dm-devel@redhat.com
Subject: [for-4.16 PATCH v2 3/5] nvme: move nvme_req_needs_failover() from multipath to core
Date: Tue, 26 Dec 2017 22:22:55 -0500 [thread overview]
Message-ID: <20171227032257.8182-4-snitzer@redhat.com> (raw)
In-Reply-To: <20171227032257.8182-1-snitzer@redhat.com>
nvme_req_needs_failover() could be used regardless of whether
CONFIG_NVME_MULTIPATH is set.
DM multipath will also make use of it.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
---
drivers/nvme/host/core.c | 46 +++++++++++++++++++++++++++++++++++++++++++
drivers/nvme/host/multipath.c | 46 -------------------------------------------
drivers/nvme/host/nvme.h | 5 -----
3 files changed, 46 insertions(+), 51 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 99f1c7d8514e..381d19c9e431 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -188,6 +188,52 @@ static inline bool nvme_req_needs_retry(struct request *req)
return true;
}
+static bool nvme_req_needs_failover(struct request *req)
+{
+ /* Caller verifies req->q->failover_rq_fn is set */
+
+ switch (nvme_req(req)->status & 0x7ff) {
+ /*
+ * Generic command status:
+ */
+ case NVME_SC_INVALID_OPCODE:
+ case NVME_SC_INVALID_FIELD:
+ case NVME_SC_INVALID_NS:
+ case NVME_SC_LBA_RANGE:
+ case NVME_SC_CAP_EXCEEDED:
+ case NVME_SC_RESERVATION_CONFLICT:
+ return false;
+
+ /*
+ * I/O command set specific error. Unfortunately these values are
+ * reused for fabrics commands, but those should never get here.
+ */
+ case NVME_SC_BAD_ATTRIBUTES:
+ case NVME_SC_INVALID_PI:
+ case NVME_SC_READ_ONLY:
+ case NVME_SC_ONCS_NOT_SUPPORTED:
+ WARN_ON_ONCE(nvme_req(req)->cmd->common.opcode ==
+ nvme_fabrics_command);
+ return false;
+
+ /*
+ * Media and Data Integrity Errors:
+ */
+ case NVME_SC_WRITE_FAULT:
+ case NVME_SC_READ_ERROR:
+ case NVME_SC_GUARD_CHECK:
+ case NVME_SC_APPTAG_CHECK:
+ case NVME_SC_REFTAG_CHECK:
+ case NVME_SC_COMPARE_FAILED:
+ case NVME_SC_ACCESS_DENIED:
+ case NVME_SC_UNWRITTEN_BLOCK:
+ return false;
+ }
+
+ /* Everything else could be a path failure, so should be retried */
+ return true;
+}
+
void nvme_complete_rq(struct request *req)
{
if (unlikely(nvme_req(req)->status && nvme_req_needs_retry(req))) {
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index b576942b96b2..9cc6b80f3530 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -33,52 +33,6 @@ void nvme_failover_req(struct request *req)
kblockd_schedule_work(&ns->head->requeue_work);
}
-bool nvme_req_needs_failover(struct request *req)
-{
- /* Caller verifies req->q->failover_rq_fn is set */
-
- switch (nvme_req(req)->status & 0x7ff) {
- /*
- * Generic command status:
- */
- case NVME_SC_INVALID_OPCODE:
- case NVME_SC_INVALID_FIELD:
- case NVME_SC_INVALID_NS:
- case NVME_SC_LBA_RANGE:
- case NVME_SC_CAP_EXCEEDED:
- case NVME_SC_RESERVATION_CONFLICT:
- return false;
-
- /*
- * I/O command set specific error. Unfortunately these values are
- * reused for fabrics commands, but those should never get here.
- */
- case NVME_SC_BAD_ATTRIBUTES:
- case NVME_SC_INVALID_PI:
- case NVME_SC_READ_ONLY:
- case NVME_SC_ONCS_NOT_SUPPORTED:
- WARN_ON_ONCE(nvme_req(req)->cmd->common.opcode ==
- nvme_fabrics_command);
- return false;
-
- /*
- * Media and Data Integrity Errors:
- */
- case NVME_SC_WRITE_FAULT:
- case NVME_SC_READ_ERROR:
- case NVME_SC_GUARD_CHECK:
- case NVME_SC_APPTAG_CHECK:
- case NVME_SC_REFTAG_CHECK:
- case NVME_SC_COMPARE_FAILED:
- case NVME_SC_ACCESS_DENIED:
- case NVME_SC_UNWRITTEN_BLOCK:
- return false;
- }
-
- /* Everything else could be a path failure, so should be retried */
- return true;
-}
-
void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl)
{
struct nvme_ns *ns;
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 5ec44935690f..f31b496c863f 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -396,7 +396,6 @@ extern const struct block_device_operations nvme_ns_head_ops;
#ifdef CONFIG_NVME_MULTIPATH
void nvme_failover_req(struct request *req);
-bool nvme_req_needs_failover(struct request *req);
void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl);
int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl,struct nvme_ns_head *head);
void nvme_mpath_add_disk(struct nvme_ns_head *head);
@@ -416,10 +415,6 @@ struct nvme_ns *nvme_find_path(struct nvme_ns_head *head);
static inline void nvme_failover_req(struct request *req)
{
}
-static inline bool nvme_req_needs_failover(struct request *req)
-{
- return false;
-}
static inline void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl)
{
}
--
2.15.0
WARNING: multiple messages have this Message-ID (diff)
From: snitzer@redhat.com (Mike Snitzer)
Subject: [for-4.16 PATCH v2 3/5] nvme: move nvme_req_needs_failover() from multipath to core
Date: Tue, 26 Dec 2017 22:22:55 -0500 [thread overview]
Message-ID: <20171227032257.8182-4-snitzer@redhat.com> (raw)
In-Reply-To: <20171227032257.8182-1-snitzer@redhat.com>
nvme_req_needs_failover() could be used regardless of whether
CONFIG_NVME_MULTIPATH is set.
DM multipath will also make use of it.
Signed-off-by: Mike Snitzer <snitzer at redhat.com>
---
drivers/nvme/host/core.c | 46 +++++++++++++++++++++++++++++++++++++++++++
drivers/nvme/host/multipath.c | 46 -------------------------------------------
drivers/nvme/host/nvme.h | 5 -----
3 files changed, 46 insertions(+), 51 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 99f1c7d8514e..381d19c9e431 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -188,6 +188,52 @@ static inline bool nvme_req_needs_retry(struct request *req)
return true;
}
+static bool nvme_req_needs_failover(struct request *req)
+{
+ /* Caller verifies req->q->failover_rq_fn is set */
+
+ switch (nvme_req(req)->status & 0x7ff) {
+ /*
+ * Generic command status:
+ */
+ case NVME_SC_INVALID_OPCODE:
+ case NVME_SC_INVALID_FIELD:
+ case NVME_SC_INVALID_NS:
+ case NVME_SC_LBA_RANGE:
+ case NVME_SC_CAP_EXCEEDED:
+ case NVME_SC_RESERVATION_CONFLICT:
+ return false;
+
+ /*
+ * I/O command set specific error. Unfortunately these values are
+ * reused for fabrics commands, but those should never get here.
+ */
+ case NVME_SC_BAD_ATTRIBUTES:
+ case NVME_SC_INVALID_PI:
+ case NVME_SC_READ_ONLY:
+ case NVME_SC_ONCS_NOT_SUPPORTED:
+ WARN_ON_ONCE(nvme_req(req)->cmd->common.opcode ==
+ nvme_fabrics_command);
+ return false;
+
+ /*
+ * Media and Data Integrity Errors:
+ */
+ case NVME_SC_WRITE_FAULT:
+ case NVME_SC_READ_ERROR:
+ case NVME_SC_GUARD_CHECK:
+ case NVME_SC_APPTAG_CHECK:
+ case NVME_SC_REFTAG_CHECK:
+ case NVME_SC_COMPARE_FAILED:
+ case NVME_SC_ACCESS_DENIED:
+ case NVME_SC_UNWRITTEN_BLOCK:
+ return false;
+ }
+
+ /* Everything else could be a path failure, so should be retried */
+ return true;
+}
+
void nvme_complete_rq(struct request *req)
{
if (unlikely(nvme_req(req)->status && nvme_req_needs_retry(req))) {
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index b576942b96b2..9cc6b80f3530 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -33,52 +33,6 @@ void nvme_failover_req(struct request *req)
kblockd_schedule_work(&ns->head->requeue_work);
}
-bool nvme_req_needs_failover(struct request *req)
-{
- /* Caller verifies req->q->failover_rq_fn is set */
-
- switch (nvme_req(req)->status & 0x7ff) {
- /*
- * Generic command status:
- */
- case NVME_SC_INVALID_OPCODE:
- case NVME_SC_INVALID_FIELD:
- case NVME_SC_INVALID_NS:
- case NVME_SC_LBA_RANGE:
- case NVME_SC_CAP_EXCEEDED:
- case NVME_SC_RESERVATION_CONFLICT:
- return false;
-
- /*
- * I/O command set specific error. Unfortunately these values are
- * reused for fabrics commands, but those should never get here.
- */
- case NVME_SC_BAD_ATTRIBUTES:
- case NVME_SC_INVALID_PI:
- case NVME_SC_READ_ONLY:
- case NVME_SC_ONCS_NOT_SUPPORTED:
- WARN_ON_ONCE(nvme_req(req)->cmd->common.opcode ==
- nvme_fabrics_command);
- return false;
-
- /*
- * Media and Data Integrity Errors:
- */
- case NVME_SC_WRITE_FAULT:
- case NVME_SC_READ_ERROR:
- case NVME_SC_GUARD_CHECK:
- case NVME_SC_APPTAG_CHECK:
- case NVME_SC_REFTAG_CHECK:
- case NVME_SC_COMPARE_FAILED:
- case NVME_SC_ACCESS_DENIED:
- case NVME_SC_UNWRITTEN_BLOCK:
- return false;
- }
-
- /* Everything else could be a path failure, so should be retried */
- return true;
-}
-
void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl)
{
struct nvme_ns *ns;
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 5ec44935690f..f31b496c863f 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -396,7 +396,6 @@ extern const struct block_device_operations nvme_ns_head_ops;
#ifdef CONFIG_NVME_MULTIPATH
void nvme_failover_req(struct request *req);
-bool nvme_req_needs_failover(struct request *req);
void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl);
int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl,struct nvme_ns_head *head);
void nvme_mpath_add_disk(struct nvme_ns_head *head);
@@ -416,10 +415,6 @@ struct nvme_ns *nvme_find_path(struct nvme_ns_head *head);
static inline void nvme_failover_req(struct request *req)
{
}
-static inline bool nvme_req_needs_failover(struct request *req)
-{
- return false;
-}
static inline void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl)
{
}
--
2.15.0
next prev parent reply other threads:[~2017-12-27 3:22 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-27 3:22 [for-4.16 PATCH v2 0/5] block, nvme, dm: allow DM multipath to use NVMe's error handler Mike Snitzer
2017-12-27 3:22 ` Mike Snitzer
2017-12-27 3:22 ` [for-4.16 PATCH v2 1/5] block: establish request failover callback Mike Snitzer
2017-12-27 3:22 ` Mike Snitzer
2017-12-29 10:10 ` Christoph Hellwig
2017-12-29 10:10 ` Christoph Hellwig
2017-12-29 20:19 ` Mike Snitzer
2017-12-29 20:19 ` Mike Snitzer
2018-01-04 10:28 ` Christoph Hellwig
2018-01-04 10:28 ` Christoph Hellwig
2018-01-04 14:42 ` Mike Snitzer
2018-01-04 14:42 ` Mike Snitzer
2017-12-27 3:22 ` [for-4.16 PATCH v2 2/5] nvme: use request_queue's failover_rq_fn callback for multipath failover Mike Snitzer
2017-12-27 3:22 ` Mike Snitzer
2017-12-29 10:11 ` Christoph Hellwig
2017-12-29 10:11 ` Christoph Hellwig
2017-12-29 20:22 ` Mike Snitzer
2017-12-29 20:22 ` Mike Snitzer
2017-12-27 3:22 ` Mike Snitzer [this message]
2017-12-27 3:22 ` [for-4.16 PATCH v2 3/5] nvme: move nvme_req_needs_failover() from multipath to core Mike Snitzer
2017-12-27 3:22 ` [for-4.16 PATCH v2 4/5] dm mpath: use NVMe error handling to know when an error is retryable Mike Snitzer
2017-12-27 3:22 ` Mike Snitzer
2017-12-27 3:22 ` [for-4.16 PATCH v2 5/5] dm mpath: skip calls to end_io_bio if using NVMe bio-based and round-robin Mike Snitzer
2017-12-27 3:22 ` Mike Snitzer
2018-01-02 23:29 ` [for-4.16 PATCH v2 0/5] block, nvme, dm: allow DM multipath to use NVMe's error handler Keith Busch
2018-01-02 23:29 ` Keith Busch
2018-01-03 0:24 ` Mike Snitzer
2018-01-03 0:24 ` Mike Snitzer
2018-01-04 10:26 ` Christoph Hellwig
2018-01-04 10:26 ` Christoph Hellwig
2018-01-04 14:08 ` Mike Snitzer
2018-01-04 14:08 ` Mike Snitzer
2018-01-04 16:26 ` Mike Snitzer
2018-01-04 16:26 ` Mike Snitzer
2018-01-08 6:52 ` Hannes Reinecke
2018-01-08 6:52 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171227032257.8182-4-snitzer@redhat.com \
--to=snitzer@redhat.com \
--cc=Bart.VanAssche@wdc.com \
--cc=axboe@kernel.dk \
--cc=dm-devel@redhat.com \
--cc=emilne@redhat.com \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=james.smart@broadcom.com \
--cc=keith.busch@intel.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.