From: jacopo mondi <jacopo@jmondi.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
magnus.damm@gmail.com, geert@glider.be, mchehab@kernel.org,
hverkuil@xs4all.nl, robh+dt@kernel.org, mark.rutland@arm.com,
linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
linux-sh@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/9] include: media: Add Renesas CEU driver interface
Date: Wed, 3 Jan 2018 10:00:31 +0100 [thread overview]
Message-ID: <20180103090031.GB9493@w540> (raw)
In-Reply-To: <2922415.TB8nfS0gW1@avalon>
Hi Laurent,
On Tue, Jan 02, 2018 at 01:50:07PM +0200, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Thursday, 28 December 2017 16:01:14 EET Jacopo Mondi wrote:
> > Add renesas-ceu header file.
> >
> > Do not remove the existing sh_mobile_ceu.h one as long as the original
> > driver does not go away.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> > include/media/drv-intf/renesas-ceu.h | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> > create mode 100644 include/media/drv-intf/renesas-ceu.h
> >
> > diff --git a/include/media/drv-intf/renesas-ceu.h
> > b/include/media/drv-intf/renesas-ceu.h new file mode 100644
> > index 0000000..7470c3f
> > --- /dev/null
> > +++ b/include/media/drv-intf/renesas-ceu.h
> > @@ -0,0 +1,20 @@
> > +// SPDX-License-Identifier: GPL-2.0+
>
> Just out of curiosity, any reason you have picked GPL-2.0+ and not GPL-2.0 ?
Good question. I would mention lazyness in copying the SPDX identifier
from somewhere else and overlooking the license version reported
there. I don't have any personal preference on GPLv3 I was trying to
squeeze in :)
I'll switch it back to GPL-2.0 only
>
> You might want to add a copyright header to state copyright ownership
>
> /**
> * renesas-ceu.h - Renesas CEU driver interface
> *
> * Copyright 2017-2018 Jacopo Mondi <jacopo@jmondi.org>
> */
>
> That's up to you.
>
> > +#ifndef __ASM_RENESAS_CEU_H__
>
> Maybe __MEDIA_DRV_INTF_RENESAS_CEU_H__ ?
>
> > +#define __ASM_RENESAS_CEU_H__
> > +
> > +#define CEU_MAX_SUBDEVS 2
> > +
> > +struct ceu_async_subdev {
> > + unsigned long flags;
> > + unsigned char bus_width;
> > + unsigned char bus_shift;
> > + unsigned int i2c_adapter_id;
> > + unsigned int i2c_address;
> > +};
> > +
> > +struct ceu_info {
>
> This is really platform data, how about calling it ceu_platform_data ?
>
> > + unsigned int num_subdevs;
> > + struct ceu_async_subdev subdevs[CEU_MAX_SUBDEVS];
> > +};
> > +
> > +#endif /* __ASM_RENESAS_CEU_H__ */
>
> Don't forget to update the comment here too.
>
> Apart from that,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks
j
>
> --
> Regards,
>
> Laurent Pinchart
>
WARNING: multiple messages have this Message-ID (diff)
From: jacopo mondi <jacopo@jmondi.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
magnus.damm@gmail.com, geert@glider.be, mchehab@kernel.org,
hverkuil@xs4all.nl, robh+dt@kernel.org, mark.rutland@arm.com,
linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
linux-sh@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/9] include: media: Add Renesas CEU driver interface
Date: Wed, 03 Jan 2018 09:00:31 +0000 [thread overview]
Message-ID: <20180103090031.GB9493@w540> (raw)
In-Reply-To: <2922415.TB8nfS0gW1@avalon>
Hi Laurent,
On Tue, Jan 02, 2018 at 01:50:07PM +0200, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Thursday, 28 December 2017 16:01:14 EET Jacopo Mondi wrote:
> > Add renesas-ceu header file.
> >
> > Do not remove the existing sh_mobile_ceu.h one as long as the original
> > driver does not go away.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> > include/media/drv-intf/renesas-ceu.h | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> > create mode 100644 include/media/drv-intf/renesas-ceu.h
> >
> > diff --git a/include/media/drv-intf/renesas-ceu.h
> > b/include/media/drv-intf/renesas-ceu.h new file mode 100644
> > index 0000000..7470c3f
> > --- /dev/null
> > +++ b/include/media/drv-intf/renesas-ceu.h
> > @@ -0,0 +1,20 @@
> > +// SPDX-License-Identifier: GPL-2.0+
>
> Just out of curiosity, any reason you have picked GPL-2.0+ and not GPL-2.0 ?
Good question. I would mention lazyness in copying the SPDX identifier
from somewhere else and overlooking the license version reported
there. I don't have any personal preference on GPLv3 I was trying to
squeeze in :)
I'll switch it back to GPL-2.0 only
>
> You might want to add a copyright header to state copyright ownership
>
> /**
> * renesas-ceu.h - Renesas CEU driver interface
> *
> * Copyright 2017-2018 Jacopo Mondi <jacopo@jmondi.org>
> */
>
> That's up to you.
>
> > +#ifndef __ASM_RENESAS_CEU_H__
>
> Maybe __MEDIA_DRV_INTF_RENESAS_CEU_H__ ?
>
> > +#define __ASM_RENESAS_CEU_H__
> > +
> > +#define CEU_MAX_SUBDEVS 2
> > +
> > +struct ceu_async_subdev {
> > + unsigned long flags;
> > + unsigned char bus_width;
> > + unsigned char bus_shift;
> > + unsigned int i2c_adapter_id;
> > + unsigned int i2c_address;
> > +};
> > +
> > +struct ceu_info {
>
> This is really platform data, how about calling it ceu_platform_data ?
>
> > + unsigned int num_subdevs;
> > + struct ceu_async_subdev subdevs[CEU_MAX_SUBDEVS];
> > +};
> > +
> > +#endif /* __ASM_RENESAS_CEU_H__ */
>
> Don't forget to update the comment here too.
>
> Apart from that,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks
j
>
> --
> Regards,
>
> Laurent Pinchart
>
next prev parent reply other threads:[~2018-01-03 9:00 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-28 14:01 [PATCH v2 0/9] Renesas Capture Engine Unit (CEU) V4L2 driver Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2017-12-28 14:01 ` [PATCH v2 1/9] dt-bindings: media: Add Renesas CEU bindings Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2018-01-02 9:34 ` Geert Uytterhoeven
2018-01-02 9:34 ` Geert Uytterhoeven
2018-01-02 11:45 ` Laurent Pinchart
2018-01-02 11:45 ` Laurent Pinchart
2018-01-03 8:49 ` jacopo mondi
2018-01-03 8:49 ` jacopo mondi
2018-01-03 11:22 ` Laurent Pinchart
2018-01-03 11:22 ` Laurent Pinchart
2017-12-28 14:01 ` [PATCH v2 2/9] include: media: Add Renesas CEU driver interface Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2018-01-02 11:50 ` Laurent Pinchart
2018-01-02 11:50 ` Laurent Pinchart
2018-01-03 9:00 ` jacopo mondi [this message]
2018-01-03 9:00 ` jacopo mondi
2017-12-28 14:01 ` [PATCH v2 3/9] v4l: platform: Add Renesas CEU driver Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2018-01-02 13:46 ` Laurent Pinchart
2018-01-02 13:46 ` Laurent Pinchart
2018-01-02 13:46 ` Laurent Pinchart
2018-01-03 10:47 ` jacopo mondi
2018-01-03 10:47 ` jacopo mondi
2018-01-03 11:19 ` Laurent Pinchart
2018-01-03 11:19 ` Laurent Pinchart
2017-12-28 14:01 ` [PATCH v2 4/9] ARM: dts: r7s72100: Add Capture Engine Unit (CEU) Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2018-01-02 9:35 ` Geert Uytterhoeven
2018-01-02 9:35 ` Geert Uytterhoeven
2018-01-02 9:35 ` Geert Uytterhoeven
2018-01-02 13:54 ` Laurent Pinchart
2018-01-02 13:54 ` Laurent Pinchart
2018-01-02 13:54 ` Laurent Pinchart
2017-12-28 14:01 ` [PATCH v2 5/9] arch: sh: migor: Use new renesas-ceu camera driver Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2017-12-30 19:04 ` kbuild test robot
2017-12-30 19:04 ` kbuild test robot
2017-12-30 19:04 ` kbuild test robot
2018-01-02 15:27 ` Laurent Pinchart
2018-01-02 15:27 ` Laurent Pinchart
2017-12-28 14:01 ` [PATCH v2 6/9] v4l: i2c: Copy ov772x soc_camera sensor driver Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2017-12-29 12:47 ` Philippe Ombredanne
2017-12-29 12:47 ` Philippe Ombredanne
2018-01-02 9:00 ` jacopo mondi
2018-01-02 9:00 ` jacopo mondi
2017-12-28 14:01 ` [PATCH v2 7/9] media: i2c: ov772x: Remove soc_camera dependencies Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2018-01-02 15:44 ` Laurent Pinchart
2018-01-02 15:44 ` Laurent Pinchart
2018-01-03 15:44 ` jacopo mondi
2018-01-03 15:44 ` jacopo mondi
2018-01-03 15:44 ` jacopo mondi
2018-01-03 15:49 ` Laurent Pinchart
2018-01-03 15:49 ` Laurent Pinchart
2018-01-03 16:24 ` jacopo mondi
2018-01-03 16:24 ` jacopo mondi
2017-12-28 14:01 ` [PATCH v2 8/9] v4l: i2c: Copy tw9910 soc_camera sensor driver Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2017-12-28 14:01 ` [PATCH v2 9/9] media: i2c: tw9910: Remove soc_camera dependencies Jacopo Mondi
2017-12-28 14:01 ` Jacopo Mondi
2018-01-02 15:50 ` Laurent Pinchart
2018-01-02 15:50 ` Laurent Pinchart
2018-01-03 16:24 ` jacopo mondi
2018-01-03 16:24 ` jacopo mondi
2018-01-03 16:41 ` Fabio Estevam
2018-01-03 16:41 ` Fabio Estevam
2018-01-03 17:13 ` jacopo mondi
2018-01-03 17:13 ` jacopo mondi
2018-01-03 17:13 ` jacopo mondi
2018-01-03 17:27 ` Fabio Estevam
2018-01-03 17:27 ` Fabio Estevam
2018-01-03 17:37 ` jacopo mondi
2018-01-03 17:37 ` jacopo mondi
2018-01-03 18:14 ` Fabio Estevam
2018-01-03 18:14 ` Fabio Estevam
2018-01-03 19:34 ` jacopo mondi
2018-01-03 19:34 ` jacopo mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180103090031.GB9493@w540 \
--to=jacopo@jmondi.org \
--cc=devicetree@vger.kernel.org \
--cc=geert@glider.be \
--cc=hverkuil@xs4all.nl \
--cc=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.