From: Pavel Machek <pavel@ucw.cz>
To: Sebastian Reichel <sre@kernel.org>
Cc: pali.rohar@gmail.com,
"kernel list" <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org,
aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com,
patrikbachan@gmail.com, serge@hallyn.com, abcloriens@gmail.com,
clayton@craftyguy.net, martijn@brixit.nl,
sakari.ailus@linux.intel.com,
"Filip Matijević" <filip.matijevic.pz@gmail.com>,
bcousson@baylibre.com, devicetree@vger.kernel.org
Subject: Re: [PATCH] nokia N9: Add support for magnetometer and touchscreen
Date: Wed, 3 Jan 2018 11:25:53 +0100 [thread overview]
Message-ID: <20180103102553.GA28083@amd> (raw)
In-Reply-To: <20180102172720.ghtez4d3d2fgcmj6@earth.universe>
[-- Attachment #1: Type: text/plain, Size: 2033 bytes --]
On Tue 2018-01-02 18:27:20, Sebastian Reichel wrote:
> Hi,
>
> On Tue, Jan 02, 2018 at 02:17:22PM +0100, Pavel Machek wrote:
> > This adds dts support for magnetometer and touchscreen on Nokia N9.
>
> I think it makes sense to have this splitted.
Creating more work for everyone for little gain? Meh.
> > diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
> > index 39e35f8..57a6679 100644
> > --- a/arch/arm/boot/dts/omap3-n9.dts
> > +++ b/arch/arm/boot/dts/omap3-n9.dts
> > @@ -36,6 +57,22 @@
> > };
> > };
> > };
> > +
> > + touch@4b {
>
> touchscreen@
Ok.
> > + compatible = "atmel,maxtouch";
> > + reg = <0x4b>;
> > + interrupt-parent = <&gpio2>;
> > + interrupts = <29 2>; /* gpio_61, IRQF_TRIGGER_FALLING*/
>
> reset-gpios = <&gpio3 17 GPIO_ACTIVE_SOMETHING>;
>
> > + vdd-supply = <&vio>;
> > + avdd-supply = <&vaux1>;
>
> Those two are not mentioned in the binding and not supported by the
> driver as far as I can see?
Driver will need to be fixed, AFAICT :-(.
> Touchscreen with the same settings is required for n950, so it
> should be in the shared n950 + n9 file.
In future, settings will be different for n9/n950: calibration matrix
is different as panel is rotated in different way. Still it probably
makes sense to share. Ok.
> > +&i2c3 {
> > + ak8975@0f {
> > + compatible = "asahi-kasei,ak8975";
> > + reg = <0x0f>;
> > + };
> > };
>
> Looking at the N9 board file this is missing a rotation matrix. This
> is supported by the binding:
>
> Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
Do you have an idea how the rotation matrix should look like? I don't
currently have an userland software that could calibrate and test the
sensor, so I'd prefer to merge basic binding now and do calibration
later.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] nokia N9: Add support for magnetometer and touchscreen
Date: Wed, 3 Jan 2018 11:25:53 +0100 [thread overview]
Message-ID: <20180103102553.GA28083@amd> (raw)
In-Reply-To: <20180102172720.ghtez4d3d2fgcmj6@earth.universe>
On Tue 2018-01-02 18:27:20, Sebastian Reichel wrote:
> Hi,
>
> On Tue, Jan 02, 2018 at 02:17:22PM +0100, Pavel Machek wrote:
> > This adds dts support for magnetometer and touchscreen on Nokia N9.
>
> I think it makes sense to have this splitted.
Creating more work for everyone for little gain? Meh.
> > diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
> > index 39e35f8..57a6679 100644
> > --- a/arch/arm/boot/dts/omap3-n9.dts
> > +++ b/arch/arm/boot/dts/omap3-n9.dts
> > @@ -36,6 +57,22 @@
> > };
> > };
> > };
> > +
> > + touch at 4b {
>
> touchscreen@
Ok.
> > + compatible = "atmel,maxtouch";
> > + reg = <0x4b>;
> > + interrupt-parent = <&gpio2>;
> > + interrupts = <29 2>; /* gpio_61, IRQF_TRIGGER_FALLING*/
>
> reset-gpios = <&gpio3 17 GPIO_ACTIVE_SOMETHING>;
>
> > + vdd-supply = <&vio>;
> > + avdd-supply = <&vaux1>;
>
> Those two are not mentioned in the binding and not supported by the
> driver as far as I can see?
Driver will need to be fixed, AFAICT :-(.
> Touchscreen with the same settings is required for n950, so it
> should be in the shared n950 + n9 file.
In future, settings will be different for n9/n950: calibration matrix
is different as panel is rotated in different way. Still it probably
makes sense to share. Ok.
> > +&i2c3 {
> > + ak8975 at 0f {
> > + compatible = "asahi-kasei,ak8975";
> > + reg = <0x0f>;
> > + };
> > };
>
> Looking at the N9 board file this is missing a rotation matrix. This
> is supported by the binding:
>
> Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
Do you have an idea how the rotation matrix should look like? I don't
currently have an userland software that could calibrate and test the
sensor, so I'd prefer to merge basic binding now and do calibration
later.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180103/f2e1f8bd/attachment.sig>
next prev parent reply other threads:[~2018-01-03 10:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 13:17 [PATCH] nokia N9: Add support for magnetometer and touchscreen Pavel Machek
2018-01-02 13:17 ` Pavel Machek
2018-01-02 17:27 ` Sebastian Reichel
2018-01-02 17:27 ` Sebastian Reichel
2018-01-03 10:25 ` Pavel Machek [this message]
2018-01-03 10:25 ` Pavel Machek
2018-01-03 11:53 ` Sebastian Reichel
2018-01-03 11:53 ` Sebastian Reichel
2018-01-03 11:53 ` Sebastian Reichel
[not found] ` <20180102172720.ghtez4d3d2fgcmj6-SfvFxonMDyemK9LvCR3Hrw@public.gmane.org>
2018-01-03 6:55 ` Filip Matijević
2018-01-03 6:55 ` Filip Matijević
2018-01-03 6:55 ` Filip Matijević
2018-01-03 14:12 ` [PATCHv2] nokia N9: Add support for magnetometer Pavel Machek
2018-01-03 14:12 ` Pavel Machek
2018-01-03 14:12 ` Pavel Machek
2018-02-14 16:58 ` Tony Lindgren
2018-02-14 16:58 ` Tony Lindgren
2018-02-14 16:58 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180103102553.GA28083@amd \
--to=pavel@ucw.cz \
--cc=aaro.koskinen@iki.fi \
--cc=abcloriens@gmail.com \
--cc=bcousson@baylibre.com \
--cc=clayton@craftyguy.net \
--cc=devicetree@vger.kernel.org \
--cc=filip.matijevic.pz@gmail.com \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=martijn@brixit.nl \
--cc=pali.rohar@gmail.com \
--cc=patrikbachan@gmail.com \
--cc=sakari.ailus@linux.intel.com \
--cc=serge@hallyn.com \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.