From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Yoshinori Sato <ysato@users.sourceforge.jp>,
Rich Felker <dalias@libc.org>,
linux-sh@vger.kernel.org
Cc: netdev@vger.kernel.org,
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Subject: [PATCH 1/2] SolutionEngine771x: fix Ether platform data
Date: Sat, 06 Jan 2018 18:53:26 +0000 [thread overview]
Message-ID: <20180106185515.780906193@cogentembedded.com> (raw)
In-Reply-To: <20180103201133.743597164@cogentembedded.com>
The 'sh_eth' driver's probe() method would fail on the SolutionEngine7710
board and crash on SolutionEngine7712 board as the platform code is
hopelessly behind the driver's platform data -- it passes the PHY address
instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in
order to fix the bug...
Fixes: 71557a37adb5 ("[netdrvr] sh_eth: Add SH7619 support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- added the necessary #include.
arch/sh/boards/mach-se/770x/setup.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
Index: linux/arch/sh/boards/mach-se/770x/setup.c
=================================--- linux.orig/arch/sh/boards/mach-se/770x/setup.c
+++ linux/arch/sh/boards/mach-se/770x/setup.c
@@ -9,6 +9,7 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/sh_eth.h>
#include <mach-se/mach/se.h>
#include <mach-se/mach/mrshpc.h>
#include <asm/machvec.h>
@@ -115,6 +116,11 @@ static struct platform_device heartbeat_
#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
defined(CONFIG_CPU_SUBTYPE_SH7712)
/* SH771X Ethernet driver */
+static struct sh_eth_plat_data sh_eth_plat = {
+ .phy = PHY_ID,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
static struct resource sh_eth0_resources[] = {
[0] = {
.start = SH_ETH0_BASE,
@@ -132,7 +138,7 @@ static struct platform_device sh_eth0_de
.name = "sh771x-ether",
.id = 0,
.dev = {
- .platform_data = PHY_ID,
+ .platform_data = &sh_eth_plat,
},
.num_resources = ARRAY_SIZE(sh_eth0_resources),
.resource = sh_eth0_resources,
@@ -155,7 +161,7 @@ static struct platform_device sh_eth1_de
.name = "sh771x-ether",
.id = 1,
.dev = {
- .platform_data = PHY_ID,
+ .platform_data = &sh_eth_plat,
},
.num_resources = ARRAY_SIZE(sh_eth1_resources),
.resource = sh_eth1_resources,
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Yoshinori Sato <ysato@users.sourceforge.jp>,
Rich Felker <dalias@libc.org>,
linux-sh@vger.kernel.org
Cc: netdev@vger.kernel.org,
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Subject: [PATCH 1/2] SolutionEngine771x: fix Ether platform data
Date: Sat, 06 Jan 2018 21:53:26 +0300 [thread overview]
Message-ID: <20180106185515.780906193@cogentembedded.com> (raw)
[-- Attachment #1: SolutionEngine771x-fix-Ether-platform-data-v2.patch --]
[-- Type: text/plain, Size: 1914 bytes --]
The 'sh_eth' driver's probe() method would fail on the SolutionEngine7710
board and crash on SolutionEngine7712 board as the platform code is
hopelessly behind the driver's platform data -- it passes the PHY address
instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in
order to fix the bug...
Fixes: 71557a37adb5 ("[netdrvr] sh_eth: Add SH7619 support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- added the necessary #include.
arch/sh/boards/mach-se/770x/setup.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
Index: linux/arch/sh/boards/mach-se/770x/setup.c
===================================================================
--- linux.orig/arch/sh/boards/mach-se/770x/setup.c
+++ linux/arch/sh/boards/mach-se/770x/setup.c
@@ -9,6 +9,7 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/sh_eth.h>
#include <mach-se/mach/se.h>
#include <mach-se/mach/mrshpc.h>
#include <asm/machvec.h>
@@ -115,6 +116,11 @@ static struct platform_device heartbeat_
#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
defined(CONFIG_CPU_SUBTYPE_SH7712)
/* SH771X Ethernet driver */
+static struct sh_eth_plat_data sh_eth_plat = {
+ .phy = PHY_ID,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
static struct resource sh_eth0_resources[] = {
[0] = {
.start = SH_ETH0_BASE,
@@ -132,7 +138,7 @@ static struct platform_device sh_eth0_de
.name = "sh771x-ether",
.id = 0,
.dev = {
- .platform_data = PHY_ID,
+ .platform_data = &sh_eth_plat,
},
.num_resources = ARRAY_SIZE(sh_eth0_resources),
.resource = sh_eth0_resources,
@@ -155,7 +161,7 @@ static struct platform_device sh_eth1_de
.name = "sh771x-ether",
.id = 1,
.dev = {
- .platform_data = PHY_ID,
+ .platform_data = &sh_eth_plat,
},
.num_resources = ARRAY_SIZE(sh_eth1_resources),
.resource = sh_eth1_resources,
next prev parent reply other threads:[~2018-01-06 18:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-03 20:08 [PATCH 1/2] SolutionEngine771x: fix Ether platform data Sergei Shtylyov
2018-01-03 20:08 ` Sergei Shtylyov
2018-01-06 18:13 ` Sergei Shtylyov
2018-01-06 18:13 ` Sergei Shtylyov
2018-01-06 18:53 ` Sergei Shtylyov [this message]
2018-01-06 18:53 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180106185515.780906193@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=dalias@libc.org \
--cc=linux-sh@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.