From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
David Airlie <airlied@linux.ie>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
dri-devel@lists.freedesktop.org,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Subject: [PATCH 3/3] drm: rcar-du: add R8A77970 support
Date: Thu, 11 Jan 2018 19:54:35 +0300 [thread overview]
Message-ID: <20180111170103.676775968@cogentembedded.com> (raw)
[-- Attachment #1: drm-rcar-du-add-R8A77970-support.patch --]
[-- Type: text/plain, Size: 5961 bytes --]
Add support for the R-Car V3M (R8A77970) SoC to the DU driver (this SoC
has only 1 display port). Note that there are some differences with the
other R-Car gen3 SoCs in the LVDS encoder part, e.g. LVDPLLCR has the same
layout as on the R-Car gen2 SoCs...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Documentation/devicetree/bindings/display/renesas,du.txt | 1
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 23 +++++++++++++++
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1
drivers/gpu/drm/rcar-du/rcar_du_group.c | 10 +++---
drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 20 +++++++++----
5 files changed, 45 insertions(+), 10 deletions(-)
Index: linux/Documentation/devicetree/bindings/display/renesas,du.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/display/renesas,du.txt
+++ linux/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -13,6 +13,7 @@ Required Properties:
- "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
- "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
- "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
+ - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
- reg: A list of base address and length of each memory resource, one for
each entry in the reg-names property.
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_drv.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -258,6 +258,28 @@ static const struct rcar_du_device_info
.dpll_ch = BIT(1),
};
+static const struct rcar_du_device_info rcar_du_r8a77970_info = {
+ .gen = 3,
+ .model = R8A77970,
+ .features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+ | RCAR_DU_FEATURE_EXT_CTRL_REGS
+ | RCAR_DU_FEATURE_VSP1_SOURCE,
+ .num_crtcs = 1,
+ .routes = {
+ /* R8A77970 has one RGB output and one LVDS output. */
+ [RCAR_DU_OUTPUT_DPAD0] = {
+ .possible_crtcs = BIT(0),
+ .port = 1,
+ },
+ [RCAR_DU_OUTPUT_LVDS0] = {
+ .possible_crtcs = BIT(0),
+ .port = 0,
+ },
+ },
+ .num_lvds = 1,
+ .dpll_ch = BIT(1),
+};
+
static const struct of_device_id rcar_du_of_table[] = {
{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
@@ -269,6 +291,7 @@ static const struct of_device_id rcar_du
{ .compatible = "renesas,du-r8a7794", .data = &rcar_du_r8a7794_info },
{ .compatible = "renesas,du-r8a7795", .data = &rcar_du_r8a7795_info },
{ .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info },
+ { .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info },
{ }
};
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_drv.h
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -59,6 +59,7 @@ enum rcar_du_model {
R8A7794,
R8A7795,
R8A7796,
+ R8A77970,
};
/*
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_group.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_group.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_group.c
@@ -133,10 +133,12 @@ static void rcar_du_group_setup(struct r
rcar_du_group_write(rgrp, DORCR, DORCR_PG1D_DS1 | DORCR_DPRS);
/* Apply planes to CRTCs association. */
- mutex_lock(&rgrp->lock);
- rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
- rgrp->dptsr_planes);
- mutex_unlock(&rgrp->lock);
+ if (rcdu->info->num_crtcs > 1) {
+ mutex_lock(&rgrp->lock);
+ rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
+ rgrp->dptsr_planes);
+ mutex_unlock(&rgrp->lock);
+ }
}
/*
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
@@ -71,8 +71,10 @@ static int rcar_du_lvdsenc_start(struct
struct rcar_du_crtc *rcrtc)
{
u32 lvdhcr, lvdpllcr, lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
+ const struct rcar_du_device_info *info = lvds->dev->info;
const struct drm_display_mode *mode = &rcrtc->crtc.mode;
- unsigned int gen = lvds->dev->info->gen;
+ unsigned int gen = info->gen;
+ enum rcar_du_model model = info->model;
unsigned int freq = mode->clock;
int ret;
@@ -104,7 +106,7 @@ static int rcar_du_lvdsenc_start(struct
rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
/* PLL clock configuration */
- if (gen < 3)
+ if (gen < 3 || model == R8A77970)
lvdpllcr = rcar_lvds_gen2_lvdpllcr(freq);
else
lvdpllcr = rcar_lvds_gen3_lvdpllcr(freq);
@@ -136,6 +138,12 @@ static int rcar_du_lvdsenc_start(struct
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
}
+ /* Turn on the LVDS PHY on R-Car V3M. */
+ if (model == R8A77970) {
+ lvdcr0 |= LVDCR0_LVEN;
+ rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+ }
+
/* Wait for the startup delay. */
usleep_range(100, 150);
@@ -177,14 +185,14 @@ int rcar_du_lvdsenc_enable(struct rcar_d
void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
struct drm_display_mode *mode)
{
- struct rcar_du_device *rcdu = lvds->dev;
+ const struct rcar_du_device_info *info = lvds->dev->info;
/*
* The internal LVDS encoder has a restricted clock frequency operating
- * range (30MHz to 150MHz on Gen2, 25.175MHz to 148.5MHz on Gen3). Clamp
- * the clock accordingly.
+ * range (30MHz to 150MHz on Gen2 and R-Car V3M, 25.175MHz to 148.5MHz
+ * on Gen3). Clamp the clock accordingly.
*/
- if (rcdu->info->gen < 3)
+ if (info->gen < 3 || info->model == R8A77970)
mode->clock = clamp(mode->clock, 30000, 150000);
else
mode->clock = clamp(mode->clock, 25175, 148500);
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
To: Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sergei Shtylyov
<sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Subject: [PATCH 3/3] drm: rcar-du: add R8A77970 support
Date: Thu, 11 Jan 2018 19:54:35 +0300 [thread overview]
Message-ID: <20180111170103.676775968@cogentembedded.com> (raw)
[-- Attachment #1: drm-rcar-du-add-R8A77970-support.patch --]
[-- Type: text/plain, Size: 6211 bytes --]
Add support for the R-Car V3M (R8A77970) SoC to the DU driver (this SoC
has only 1 display port). Note that there are some differences with the
other R-Car gen3 SoCs in the LVDS encoder part, e.g. LVDPLLCR has the same
layout as on the R-Car gen2 SoCs...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
---
Documentation/devicetree/bindings/display/renesas,du.txt | 1
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 23 +++++++++++++++
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1
drivers/gpu/drm/rcar-du/rcar_du_group.c | 10 +++---
drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 20 +++++++++----
5 files changed, 45 insertions(+), 10 deletions(-)
Index: linux/Documentation/devicetree/bindings/display/renesas,du.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/display/renesas,du.txt
+++ linux/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -13,6 +13,7 @@ Required Properties:
- "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
- "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
- "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
+ - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
- reg: A list of base address and length of each memory resource, one for
each entry in the reg-names property.
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_drv.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -258,6 +258,28 @@ static const struct rcar_du_device_info
.dpll_ch = BIT(1),
};
+static const struct rcar_du_device_info rcar_du_r8a77970_info = {
+ .gen = 3,
+ .model = R8A77970,
+ .features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+ | RCAR_DU_FEATURE_EXT_CTRL_REGS
+ | RCAR_DU_FEATURE_VSP1_SOURCE,
+ .num_crtcs = 1,
+ .routes = {
+ /* R8A77970 has one RGB output and one LVDS output. */
+ [RCAR_DU_OUTPUT_DPAD0] = {
+ .possible_crtcs = BIT(0),
+ .port = 1,
+ },
+ [RCAR_DU_OUTPUT_LVDS0] = {
+ .possible_crtcs = BIT(0),
+ .port = 0,
+ },
+ },
+ .num_lvds = 1,
+ .dpll_ch = BIT(1),
+};
+
static const struct of_device_id rcar_du_of_table[] = {
{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
@@ -269,6 +291,7 @@ static const struct of_device_id rcar_du
{ .compatible = "renesas,du-r8a7794", .data = &rcar_du_r8a7794_info },
{ .compatible = "renesas,du-r8a7795", .data = &rcar_du_r8a7795_info },
{ .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info },
+ { .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info },
{ }
};
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_drv.h
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -59,6 +59,7 @@ enum rcar_du_model {
R8A7794,
R8A7795,
R8A7796,
+ R8A77970,
};
/*
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_group.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_group.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_group.c
@@ -133,10 +133,12 @@ static void rcar_du_group_setup(struct r
rcar_du_group_write(rgrp, DORCR, DORCR_PG1D_DS1 | DORCR_DPRS);
/* Apply planes to CRTCs association. */
- mutex_lock(&rgrp->lock);
- rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
- rgrp->dptsr_planes);
- mutex_unlock(&rgrp->lock);
+ if (rcdu->info->num_crtcs > 1) {
+ mutex_lock(&rgrp->lock);
+ rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
+ rgrp->dptsr_planes);
+ mutex_unlock(&rgrp->lock);
+ }
}
/*
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
@@ -71,8 +71,10 @@ static int rcar_du_lvdsenc_start(struct
struct rcar_du_crtc *rcrtc)
{
u32 lvdhcr, lvdpllcr, lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
+ const struct rcar_du_device_info *info = lvds->dev->info;
const struct drm_display_mode *mode = &rcrtc->crtc.mode;
- unsigned int gen = lvds->dev->info->gen;
+ unsigned int gen = info->gen;
+ enum rcar_du_model model = info->model;
unsigned int freq = mode->clock;
int ret;
@@ -104,7 +106,7 @@ static int rcar_du_lvdsenc_start(struct
rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
/* PLL clock configuration */
- if (gen < 3)
+ if (gen < 3 || model == R8A77970)
lvdpllcr = rcar_lvds_gen2_lvdpllcr(freq);
else
lvdpllcr = rcar_lvds_gen3_lvdpllcr(freq);
@@ -136,6 +138,12 @@ static int rcar_du_lvdsenc_start(struct
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
}
+ /* Turn on the LVDS PHY on R-Car V3M. */
+ if (model == R8A77970) {
+ lvdcr0 |= LVDCR0_LVEN;
+ rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+ }
+
/* Wait for the startup delay. */
usleep_range(100, 150);
@@ -177,14 +185,14 @@ int rcar_du_lvdsenc_enable(struct rcar_d
void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
struct drm_display_mode *mode)
{
- struct rcar_du_device *rcdu = lvds->dev;
+ const struct rcar_du_device_info *info = lvds->dev->info;
/*
* The internal LVDS encoder has a restricted clock frequency operating
- * range (30MHz to 150MHz on Gen2, 25.175MHz to 148.5MHz on Gen3). Clamp
- * the clock accordingly.
+ * range (30MHz to 150MHz on Gen2 and R-Car V3M, 25.175MHz to 148.5MHz
+ * on Gen3). Clamp the clock accordingly.
*/
- if (rcdu->info->gen < 3)
+ if (info->gen < 3 || info->model == R8A77970)
mode->clock = clamp(mode->clock, 30000, 150000);
else
mode->clock = clamp(mode->clock, 25175, 148500);
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2018-01-11 17:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-11 16:54 Sergei Shtylyov [this message]
2018-01-11 16:54 ` [PATCH 3/3] drm: rcar-du: add R8A77970 support Sergei Shtylyov
2018-01-12 1:13 ` Laurent Pinchart
2018-01-12 9:23 ` Sergei Shtylyov
2018-01-12 9:23 ` Sergei Shtylyov
2018-01-12 14:30 ` Laurent Pinchart
2018-01-12 14:30 ` Laurent Pinchart
2018-01-12 14:38 ` Sergei Shtylyov
2018-01-12 14:38 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180111170103.676775968@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.