All of lore.kernel.org
 help / color / mirror / Atom feed
From: thierry.reding@gmail.com (Thierry Reding)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] soc: brcmstb: Avoid error messages on non-STB platforms
Date: Fri, 12 Jan 2018 14:38:13 +0100	[thread overview]
Message-ID: <20180112133813.3716-3-thierry.reding@gmail.com> (raw)
In-Reply-To: <20180112133813.3716-1-thierry.reding@gmail.com>

From: Thierry Reding <treding@nvidia.com>

Move the check for STB platforms up into the early initcall so that the
code can abort early (and without an error) if it runs on non-STB
platforms.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/soc/bcm/brcmstb/biuctrl.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c
index 2b23ae7b5e9b..1044cc6c3ffc 100644
--- a/drivers/soc/bcm/brcmstb/biuctrl.c
+++ b/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -162,22 +162,15 @@ static void __init mcp_b53_set(void)
 	cbc_writel(reg, CPU_WRITEBACK_CTRL_REG);
 }
 
-static int __init setup_hifcpubiuctrl_regs(void)
+static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
 {
-	struct device_node *np, *cpu_dn;
+	struct device_node *cpu_dn;
 	int ret = 0;
 
-	np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
-	if (!np) {
-		pr_err("missing BIU control node\n");
-		return -ENODEV;
-	}
-
 	cpubiuctrl_base = of_iomap(np, 0);
 	if (!cpubiuctrl_base) {
 		pr_err("failed to remap BIU control base\n");
-		ret = -ENOMEM;
-		goto out;
+		return -ENOMEM;
 	}
 
 	mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing");
@@ -185,8 +178,7 @@ static int __init setup_hifcpubiuctrl_regs(void)
 	cpu_dn = of_get_cpu_node(0, NULL);
 	if (!cpu_dn) {
 		pr_err("failed to obtain CPU device node\n");
-		ret = -ENODEV;
-		goto out;
+		return -ENODEV;
 	}
 
 	if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15"))
@@ -201,9 +193,8 @@ static int __init setup_hifcpubiuctrl_regs(void)
 
 	if (BRCM_ID(brcmstb_get_family_id()) == 0x7260)
 		cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs;
-out:
-	of_node_put(np);
-	return ret;
+
+	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -242,9 +233,15 @@ static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
 
 static int __init brcmstb_biuctrl_init(void)
 {
+	struct device_node *np;
 	int ret;
 
-	setup_hifcpubiuctrl_regs();
+	np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
+	if (!np)
+		return 0;
+
+	setup_hifcpubiuctrl_regs(np);
+	of_node_put(np);
 
 	ret = mcp_write_pairing_set();
 	if (ret) {
-- 
2.15.1

WARNING: multiple messages have this Message-ID (diff)
From: Thierry Reding <thierry.reding@gmail.com>
To: Brian Norris <computersforpeace@gmail.com>,
	Gregory Fong <gregory.0xf0@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	arm@kernel.org, bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] soc: brcmstb: Avoid error messages on non-STB platforms
Date: Fri, 12 Jan 2018 14:38:13 +0100	[thread overview]
Message-ID: <20180112133813.3716-3-thierry.reding@gmail.com> (raw)
In-Reply-To: <20180112133813.3716-1-thierry.reding@gmail.com>

From: Thierry Reding <treding@nvidia.com>

Move the check for STB platforms up into the early initcall so that the
code can abort early (and without an error) if it runs on non-STB
platforms.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/soc/bcm/brcmstb/biuctrl.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c
index 2b23ae7b5e9b..1044cc6c3ffc 100644
--- a/drivers/soc/bcm/brcmstb/biuctrl.c
+++ b/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -162,22 +162,15 @@ static void __init mcp_b53_set(void)
 	cbc_writel(reg, CPU_WRITEBACK_CTRL_REG);
 }
 
-static int __init setup_hifcpubiuctrl_regs(void)
+static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
 {
-	struct device_node *np, *cpu_dn;
+	struct device_node *cpu_dn;
 	int ret = 0;
 
-	np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
-	if (!np) {
-		pr_err("missing BIU control node\n");
-		return -ENODEV;
-	}
-
 	cpubiuctrl_base = of_iomap(np, 0);
 	if (!cpubiuctrl_base) {
 		pr_err("failed to remap BIU control base\n");
-		ret = -ENOMEM;
-		goto out;
+		return -ENOMEM;
 	}
 
 	mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing");
@@ -185,8 +178,7 @@ static int __init setup_hifcpubiuctrl_regs(void)
 	cpu_dn = of_get_cpu_node(0, NULL);
 	if (!cpu_dn) {
 		pr_err("failed to obtain CPU device node\n");
-		ret = -ENODEV;
-		goto out;
+		return -ENODEV;
 	}
 
 	if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15"))
@@ -201,9 +193,8 @@ static int __init setup_hifcpubiuctrl_regs(void)
 
 	if (BRCM_ID(brcmstb_get_family_id()) == 0x7260)
 		cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs;
-out:
-	of_node_put(np);
-	return ret;
+
+	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -242,9 +233,15 @@ static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
 
 static int __init brcmstb_biuctrl_init(void)
 {
+	struct device_node *np;
 	int ret;
 
-	setup_hifcpubiuctrl_regs();
+	np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
+	if (!np)
+		return 0;
+
+	setup_hifcpubiuctrl_regs(np);
+	of_node_put(np);
 
 	ret = mcp_write_pairing_set();
 	if (ret) {
-- 
2.15.1

  parent reply	other threads:[~2018-01-12 13:38 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-12 13:38 [PATCH 1/3] soc: brcmstb: Do not leak OF node reference Thierry Reding
2018-01-12 13:38 ` Thierry Reding
2018-01-12 13:38 ` [PATCH 2/3] soc: brcmstb: Do not fail initcalls on non-STB platforms Thierry Reding
2018-01-12 13:38   ` Thierry Reding
2018-01-12 13:38 ` Thierry Reding [this message]
2018-01-12 13:38   ` [PATCH 3/3] soc: brcmstb: Avoid error messages " Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180112133813.3716-3-thierry.reding@gmail.com \
    --to=thierry.reding@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.