From: Miquel Raynal <miquel.raynal@free-electrons.com>
To: Willy Tarreau <w@1wt.eu>
Cc: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@free-electrons.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Eric Miao <eric.y.miao@gmail.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
devicetree@vger.kernel.org,
Sean Nyekjaer <sean.nyekjaer@prevas.dk>,
Antoine Tenart <antoine.tenart@free-electrons.com>,
Nadav Haklai <nadavh@marvell.com>,
linux-mtd@lists.infradead.org,
Neta Zur Hershkovits <neta@marvell.com>,
Hanna Hawa <hannah@marvell.com>, Ofer Heifetz <oferh@marvell.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 0/7] Marvell NAND controller rework with ->exec_op()
Date: Fri, 12 Jan 2018 19:21:42 +0100 [thread overview]
Message-ID: <20180112192142.6541edf4@xps13> (raw)
In-Reply-To: <20180111222833.GA15584@1wt.eu>
Hello Willy,
On Thu, 11 Jan 2018 23:28:33 +0100
Willy Tarreau <w@1wt.eu> wrote:
> Hi Miquel,
>
> On Tue, Jan 09, 2018 at 11:36:30AM +0100, Miquel Raynal wrote:
> > These changes have been tested on:
> > - PXA3xx platform with a CM-X300 board (2kiB page NAND, 1b/512B
> > strength, Hamming ECC engine) [32 bits]
> > - Armada 385 DB AP (4kiB page NAND, 4b/512B, BCH ECC engine) [32
> > bits]
> > - Armada 398 DB (4kiB page NAND, 8b/512B, BCH ECC engine using a
> > layout with a last chunk different than the others) [32 bits]
> > - Armada 7040 DB and Armada 8040 DB (4kiB page NAND, 4b/512B,
> > BCH ECC engine) [64 bits]
> > - Triax dvb-tc board (2kiB page NAND, 4b/512B, BCH ECC engine)
> > [32 bits]
>
> If you're interested, I have a mirabox with an armada 370 which uses
> the same driver. I've not powered it up for a while but if that can
> be useful I can try to find some time for this.
Thank you very much for the proposal!
For the moment I don't think there is a need as this type of platform
has already been tested, but I keep it in mind.
Thanks again!
Miquèl
WARNING: multiple messages have this Message-ID (diff)
From: miquel.raynal@free-electrons.com (Miquel Raynal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/7] Marvell NAND controller rework with ->exec_op()
Date: Fri, 12 Jan 2018 19:21:42 +0100 [thread overview]
Message-ID: <20180112192142.6541edf4@xps13> (raw)
In-Reply-To: <20180111222833.GA15584@1wt.eu>
Hello Willy,
On Thu, 11 Jan 2018 23:28:33 +0100
Willy Tarreau <w@1wt.eu> wrote:
> Hi Miquel,
>
> On Tue, Jan 09, 2018 at 11:36:30AM +0100, Miquel Raynal wrote:
> > These changes have been tested on:
> > - PXA3xx platform with a CM-X300 board (2kiB page NAND, 1b/512B
> > strength, Hamming ECC engine) [32 bits]
> > - Armada 385 DB AP (4kiB page NAND, 4b/512B, BCH ECC engine) [32
> > bits]
> > - Armada 398 DB (4kiB page NAND, 8b/512B, BCH ECC engine using a
> > layout with a last chunk different than the others) [32 bits]
> > - Armada 7040 DB and Armada 8040 DB (4kiB page NAND, 4b/512B,
> > BCH ECC engine) [64 bits]
> > - Triax dvb-tc board (2kiB page NAND, 4b/512B, BCH ECC engine)
> > [32 bits]
>
> If you're interested, I have a mirabox with an armada 370 which uses
> the same driver. I've not powered it up for a while but if that can
> be useful I can try to find some time for this.
Thank you very much for the proposal!
For the moment I don't think there is a need as this type of platform
has already been tested, but I keep it in mind.
Thanks again!
Miqu?l
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Willy Tarreau <w@1wt.eu>
Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Boris Brezillon
<boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>,
Cyrille Pitchen
<cyrille.pitchen-yU5RGvR974pGWvitb5QawA@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
Gregory Clement
<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Sebastian Hesselbarth
<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Daniel Mack <daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org>,
Haojian Zhuang
<haojian.zhuang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>,
Eric Miao <eric.y.miao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>
Subject: Re: [PATCH v3 0/7] Marvell NAND controller rework with ->exec_op()
Date: Fri, 12 Jan 2018 19:21:42 +0100 [thread overview]
Message-ID: <20180112192142.6541edf4@xps13> (raw)
In-Reply-To: <20180111222833.GA15584-K+wRfnb2/UA@public.gmane.org>
Hello Willy,
On Thu, 11 Jan 2018 23:28:33 +0100
Willy Tarreau <w@1wt.eu> wrote:
> Hi Miquel,
>
> On Tue, Jan 09, 2018 at 11:36:30AM +0100, Miquel Raynal wrote:
> > These changes have been tested on:
> > - PXA3xx platform with a CM-X300 board (2kiB page NAND, 1b/512B
> > strength, Hamming ECC engine) [32 bits]
> > - Armada 385 DB AP (4kiB page NAND, 4b/512B, BCH ECC engine) [32
> > bits]
> > - Armada 398 DB (4kiB page NAND, 8b/512B, BCH ECC engine using a
> > layout with a last chunk different than the others) [32 bits]
> > - Armada 7040 DB and Armada 8040 DB (4kiB page NAND, 4b/512B,
> > BCH ECC engine) [64 bits]
> > - Triax dvb-tc board (2kiB page NAND, 4b/512B, BCH ECC engine)
> > [32 bits]
>
> If you're interested, I have a mirabox with an armada 370 which uses
> the same driver. I've not powered it up for a while but if that can
> be useful I can try to find some time for this.
Thank you very much for the proposal!
For the moment I don't think there is a need as this type of platform
has already been tested, but I keep it in mind.
Thanks again!
Miquèl
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-01-12 18:21 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-09 10:36 [PATCH v3 0/7] Marvell NAND controller rework with ->exec_op() Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` [PATCH v3 1/7] dt-bindings: mtd: document new nand-rb property Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-11 22:23 ` Rob Herring
2018-01-11 22:23 ` Rob Herring
2018-01-11 22:23 ` Rob Herring
2018-01-09 10:36 ` [PATCH v3 2/7] dt-bindings: mtd: add Marvell NAND controller documentation Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-11 22:25 ` Rob Herring
2018-01-11 22:25 ` Rob Herring
2018-01-11 22:25 ` Rob Herring
2018-01-09 10:36 ` [PATCH v3 3/7] mtd: nand: add reworked Marvell NAND controller driver Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` [PATCH v3 4/7] mtd: nand: use reworked NAND controller driver with Marvell EBU SoCs Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-11 10:16 ` Gregory CLEMENT
2018-01-09 10:36 ` [PATCH v3 5/7] mtd: nand: use Marvell reworked NAND controller driver with all platforms Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-02-12 10:20 ` Boris Brezillon
2018-02-12 10:20 ` Boris Brezillon
2018-02-12 10:20 ` Boris Brezillon
2018-01-09 10:36 ` [PATCH v3 6/7] dt-bindings: mtd: remove pxa3xx NAND controller documentation Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` [PATCH v3 7/7] mtd: nand: remove useless fields from pxa3xx NAND platform data Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-01-09 10:36 ` Miquel Raynal
2018-02-12 10:17 ` Miquel Raynal
2018-02-17 9:43 ` Robert Jarzmik
2018-01-11 11:27 ` [PATCH v3 0/7] Marvell NAND controller rework with ->exec_op() Boris Brezillon
2018-01-11 11:27 ` Boris Brezillon
2018-01-11 11:27 ` Boris Brezillon
2018-01-11 17:42 ` Robert Jarzmik
2018-01-11 17:42 ` Robert Jarzmik
2018-01-11 17:42 ` Robert Jarzmik
2018-01-11 22:24 ` Miquel RAYNAL
2018-01-11 22:24 ` Miquel RAYNAL
2018-01-11 22:24 ` Miquel RAYNAL
2018-01-12 8:09 ` Robert Jarzmik
2018-01-12 8:09 ` Robert Jarzmik
2018-01-12 8:09 ` Robert Jarzmik
2018-01-12 8:45 ` Boris Brezillon
2018-01-12 9:01 ` Miquel Raynal
2018-01-12 9:34 ` Robert Jarzmik
2018-01-12 9:52 ` Boris Brezillon
2018-01-12 20:44 ` Robert Jarzmik
2018-01-13 8:38 ` Boris Brezillon
2018-01-13 11:05 ` Miquel Raynal
2018-01-14 10:35 ` Robert Jarzmik
2018-01-22 8:51 ` Boris Brezillon
2018-01-27 10:33 ` Robert Jarzmik
2018-01-29 10:36 ` Boris Brezillon
2018-01-12 10:21 ` Boris Brezillon
2018-01-12 16:43 ` Robert Jarzmik
2018-01-13 8:38 ` Boris Brezillon
2018-01-14 10:20 ` Robert Jarzmik
2018-01-22 8:54 ` Boris Brezillon
2018-01-11 22:28 ` Willy Tarreau
2018-01-11 22:28 ` Willy Tarreau
2018-01-11 22:28 ` Willy Tarreau
2018-01-12 18:21 ` Miquel Raynal [this message]
2018-01-12 18:21 ` Miquel Raynal
2018-01-12 18:21 ` Miquel Raynal
2018-01-12 15:55 ` Boris Brezillon
2018-01-12 15:55 ` Boris Brezillon
2018-01-12 15:55 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180112192142.6541edf4@xps13 \
--to=miquel.raynal@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=catalin.marinas@arm.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@wedev4u.fr \
--cc=daniel@zonque.org \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=eric.y.miao@gmail.com \
--cc=ezequiel.garcia@free-electrons.com \
--cc=gregory.clement@free-electrons.com \
--cc=hannah@marvell.com \
--cc=haojian.zhuang@gmail.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=marek.vasut@gmail.com \
--cc=mark.rutland@arm.com \
--cc=nadavh@marvell.com \
--cc=neta@marvell.com \
--cc=oferh@marvell.com \
--cc=richard@nod.at \
--cc=robert.jarzmik@free.fr \
--cc=robh+dt@kernel.org \
--cc=sean.nyekjaer@prevas.dk \
--cc=sebastian.hesselbarth@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=w@1wt.eu \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.