All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <architt@codeaurora.org>
To: robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org, latkinso@codeaurora.org,
	sibis@codeaurora.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 1/4] drm/msm/dsi: Update generated headers for 10nm PLL/PHY
Date: Wed, 17 Jan 2018 11:35:24 +0530	[thread overview]
Message-ID: <20180117060527.7935-2-architt@codeaurora.org> (raw)
In-Reply-To: <20180117060527.7935-1-architt@codeaurora.org>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.xml.h | 187 +++++++++++++++++++++++++++++++++++---
 1 file changed, 174 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 479086ccf180..f6a9471b70c8 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -8,19 +8,10 @@ This file was generated by the rules-ng-ng headergen tool in this git repository
 git clone https://github.com/freedreno/envytools.git
 
 The rules-ng-ng source files this header was generated from are:
-- /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2017-05-17 13:21:27)
-- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1572 bytes, from 2017-05-17 13:21:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2017-05-17 13:21:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2849 bytes, from 2017-05-17 13:21:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  37411 bytes, from 2017-05-17 13:21:27)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  33004 bytes, from 2017-05-17 13:21:27)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    602 bytes, from 2017-05-17 13:21:27)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2017-05-17 13:21:27)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2017-05-17 13:21:27)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  41799 bytes, from 2017-06-16 12:32:42)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2017-05-17 13:21:27)
-
-Copyright (C) 2013-2017 by the following authors:
+- /local/mnt/workspace/source_trees/envytools/rnndb/../rnndb/dsi/dsi.xml    (  37239 bytes, from 2018-01-12 09:09:22)
+- /local/mnt/workspace/source_trees/envytools/rnndb/freedreno_copyright.xml (   1572 bytes, from 2016-05-09 06:32:54)
+
+Copyright (C) 2013-2018 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
 - Ilia Mirkin <imirkin@alum.mit.edu> (imirkin)
 
@@ -1556,5 +1547,175 @@ static inline uint32_t REG_DSI_14nm_PHY_LN_VREG_CNTRL(uint32_t i0) { return 0x00
 
 #define REG_DSI_14nm_PHY_PLL_PLL_BANDGAP			0x00000108
 
+#define REG_DSI_10nm_PHY_CMN_REVISION_ID0			0x00000000
+
+#define REG_DSI_10nm_PHY_CMN_REVISION_ID1			0x00000004
+
+#define REG_DSI_10nm_PHY_CMN_REVISION_ID2			0x00000008
+
+#define REG_DSI_10nm_PHY_CMN_REVISION_ID3			0x0000000c
+
+#define REG_DSI_10nm_PHY_CMN_CLK_CFG0				0x00000010
+
+#define REG_DSI_10nm_PHY_CMN_CLK_CFG1				0x00000014
+
+#define REG_DSI_10nm_PHY_CMN_GLBL_CTRL				0x00000018
+
+#define REG_DSI_10nm_PHY_CMN_RBUF_CTRL				0x0000001c
+
+#define REG_DSI_10nm_PHY_CMN_VREG_CTRL				0x00000020
+
+#define REG_DSI_10nm_PHY_CMN_CTRL_0				0x00000024
+
+#define REG_DSI_10nm_PHY_CMN_CTRL_1				0x00000028
+
+#define REG_DSI_10nm_PHY_CMN_CTRL_2				0x0000002c
+
+#define REG_DSI_10nm_PHY_CMN_LANE_CFG0				0x00000030
+
+#define REG_DSI_10nm_PHY_CMN_LANE_CFG1				0x00000034
+
+#define REG_DSI_10nm_PHY_CMN_PLL_CNTRL				0x00000038
+
+#define REG_DSI_10nm_PHY_CMN_LANE_CTRL0				0x00000098
+
+#define REG_DSI_10nm_PHY_CMN_LANE_CTRL1				0x0000009c
+
+#define REG_DSI_10nm_PHY_CMN_LANE_CTRL2				0x000000a0
+
+#define REG_DSI_10nm_PHY_CMN_LANE_CTRL3				0x000000a4
+
+#define REG_DSI_10nm_PHY_CMN_LANE_CTRL4				0x000000a8
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_0			0x000000ac
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_1			0x000000b0
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_2			0x000000b4
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_3			0x000000b8
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_4			0x000000bc
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_5			0x000000c0
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_6			0x000000c4
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_7			0x000000c8
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_8			0x000000cc
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_9			0x000000d0
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_10			0x000000d4
+
+#define REG_DSI_10nm_PHY_CMN_TIMING_CTRL_11			0x000000d8
+
+#define REG_DSI_10nm_PHY_CMN_PHY_STATUS				0x000000ec
+
+#define REG_DSI_10nm_PHY_CMN_LANE_STATUS0			0x000000f4
+
+#define REG_DSI_10nm_PHY_CMN_LANE_STATUS1			0x000000f8
+
+static inline uint32_t REG_DSI_10nm_PHY_LN(uint32_t i0) { return 0x00000000 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_CFG0(uint32_t i0) { return 0x00000000 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_CFG1(uint32_t i0) { return 0x00000004 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_CFG2(uint32_t i0) { return 0x00000008 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_CFG3(uint32_t i0) { return 0x0000000c + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_TEST_DATAPATH(uint32_t i0) { return 0x00000010 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_PIN_SWAP(uint32_t i0) { return 0x00000014 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_HSTX_STR_CTRL(uint32_t i0) { return 0x00000018 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_OFFSET_TOP_CTRL(uint32_t i0) { return 0x0000001c + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_OFFSET_BOT_CTRL(uint32_t i0) { return 0x00000020 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_LPTX_STR_CTRL(uint32_t i0) { return 0x00000024 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_LPRX_CTRL(uint32_t i0) { return 0x00000028 + 0x80*i0; }
+
+static inline uint32_t REG_DSI_10nm_PHY_LN_TX_DCTRL(uint32_t i0) { return 0x0000002c + 0x80*i0; }
+
+#define REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_ONE		0x00000000
+
+#define REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_TWO		0x00000004
+
+#define REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_THREE		0x00000010
+
+#define REG_DSI_10nm_PHY_PLL_DSM_DIVIDER			0x0000001c
+
+#define REG_DSI_10nm_PHY_PLL_FEEDBACK_DIVIDER			0x00000020
+
+#define REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES			0x00000024
+
+#define REG_DSI_10nm_PHY_PLL_CMODE				0x0000002c
+
+#define REG_DSI_10nm_PHY_PLL_CALIBRATION_SETTINGS		0x00000030
+
+#define REG_DSI_10nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE	0x00000054
+
+#define REG_DSI_10nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE		0x00000064
+
+#define REG_DSI_10nm_PHY_PLL_PFILT				0x0000007c
+
+#define REG_DSI_10nm_PHY_PLL_IFILT				0x00000080
+
+#define REG_DSI_10nm_PHY_PLL_OUTDIV				0x00000094
+
+#define REG_DSI_10nm_PHY_PLL_CORE_OVERRIDE			0x000000a4
+
+#define REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE		0x000000a8
+
+#define REG_DSI_10nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO		0x000000b4
+
+#define REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1		0x000000cc
+
+#define REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1		0x000000d0
+
+#define REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1		0x000000d4
+
+#define REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1		0x000000d8
+
+#define REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1			0x0000010c
+
+#define REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1		0x00000110
+
+#define REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1			0x00000114
+
+#define REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1			0x00000118
+
+#define REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1		0x0000011c
+
+#define REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1		0x00000120
+
+#define REG_DSI_10nm_PHY_PLL_SSC_CONTROL			0x0000013c
+
+#define REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE			0x00000140
+
+#define REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1			0x00000144
+
+#define REG_DSI_10nm_PHY_PLL_PLL_PROP_GAIN_RATE_1		0x0000014c
+
+#define REG_DSI_10nm_PHY_PLL_PLL_BAND_SET_RATE_1		0x00000154
+
+#define REG_DSI_10nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1		0x0000015c
+
+#define REG_DSI_10nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1	0x00000164
+
+#define REG_DSI_10nm_PHY_PLL_PLL_LOCK_OVERRIDE			0x00000180
+
+#define REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY			0x00000184
+
+#define REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS			0x0000018c
+
+#define REG_DSI_10nm_PHY_PLL_COMMON_STATUS_ONE			0x000001a0
+
 
 #endif /* DSI_XML */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-01-17  6:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-17  6:05 [PATCH 0/4] drm/msm/dsi: Add DSI 10nm PLL/PHY drivers Archit Taneja
2018-01-17  6:05 ` Archit Taneja [this message]
2018-01-17  6:05 ` [PATCH 2/4] drm/msm/dsi: Add skeleton 10nm PHY/PLL code Archit Taneja
2018-01-17  6:05 ` [PATCH 3/4] drm/msm/dsi: Populate PLL 10nm clock ops Archit Taneja
2018-01-17  6:05 ` [PATCH 4/4] drm/msm/dsi: Populate the 10nm PHY funcs Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180117060527.7935-2-architt@codeaurora.org \
    --to=architt@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=latkinso@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.