From: "Álvaro Fernández Rojas" <noltari@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] MIPS: add BMIPS Comtrend WAP-5813n board
Date: Sat, 20 Jan 2018 11:53:59 +0100 [thread overview]
Message-ID: <20180120105359.17981-4-noltari@gmail.com> (raw)
In-Reply-To: <20180120105359.17981-1-noltari@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
arch/mips/dts/comtrend,wap-5813n.dts | 65 +++++++++++++++++++++++++++++++++
board/comtrend/wap5813n/Kconfig | 12 ++++++
board/comtrend/wap5813n/MAINTAINERS | 6 +++
board/comtrend/wap5813n/Makefile | 5 +++
board/comtrend/wap5813n/wap-5813n.c | 7 ++++
configs/comtrend_wap5813n_ram_defconfig | 45 +++++++++++++++++++++++
include/configs/comtrend_wap5813n.h | 19 ++++++++++
7 files changed, 159 insertions(+)
create mode 100644 arch/mips/dts/comtrend,wap-5813n.dts
create mode 100644 board/comtrend/wap5813n/Kconfig
create mode 100644 board/comtrend/wap5813n/MAINTAINERS
create mode 100644 board/comtrend/wap5813n/Makefile
create mode 100644 board/comtrend/wap5813n/wap-5813n.c
create mode 100644 configs/comtrend_wap5813n_ram_defconfig
create mode 100644 include/configs/comtrend_wap5813n.h
diff --git a/arch/mips/dts/comtrend,wap-5813n.dts b/arch/mips/dts/comtrend,wap-5813n.dts
new file mode 100644
index 0000000000..29386e2662
--- /dev/null
+++ b/arch/mips/dts/comtrend,wap-5813n.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "brcm,bcm6368.dtsi"
+
+/ {
+ model = "Comtrend WAP-5813n";
+ compatible = "comtrend,wap-5813n", "brcm,bcm6368";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ inet_green {
+ label = "WAP-5813n:green:inet";
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_green {
+ label = "WAP-5813n:green:power";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wps_green {
+ label = "WAP-5813n:green:wps";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+
+ power_red {
+ label = "WAP-5813n:red:power";
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ inet_red {
+ label = "WAP-5813n:red:inet";
+ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pflash {
+ status = "okay";
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
diff --git a/board/comtrend/wap5813n/Kconfig b/board/comtrend/wap5813n/Kconfig
new file mode 100644
index 0000000000..2f2a14faae
--- /dev/null
+++ b/board/comtrend/wap5813n/Kconfig
@@ -0,0 +1,12 @@
+if BOARD_COMTREND_WAP5813N
+
+config SYS_BOARD
+ default "wap5813n"
+
+config SYS_VENDOR
+ default "comtrend"
+
+config SYS_CONFIG_NAME
+ default "comtrend_wap5813n"
+
+endif
diff --git a/board/comtrend/wap5813n/MAINTAINERS b/board/comtrend/wap5813n/MAINTAINERS
new file mode 100644
index 0000000000..f4d99796b4
--- /dev/null
+++ b/board/comtrend/wap5813n/MAINTAINERS
@@ -0,0 +1,6 @@
+COMTREND WAP-5813N BOARD
+M: Álvaro Fernández Rojas <noltari@gmail.com>
+S: Maintained
+F: board/comtrend/wap-5813n/
+F: include/configs/comtrend_wap-5813n.h
+F: configs/comtrend_wap5813n_ram_defconfig
diff --git a/board/comtrend/wap5813n/Makefile b/board/comtrend/wap5813n/Makefile
new file mode 100644
index 0000000000..fd7799305d
--- /dev/null
+++ b/board/comtrend/wap5813n/Makefile
@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += wap-5813n.o
diff --git a/board/comtrend/wap5813n/wap-5813n.c b/board/comtrend/wap5813n/wap-5813n.c
new file mode 100644
index 0000000000..d181ca68a0
--- /dev/null
+++ b/board/comtrend/wap5813n/wap-5813n.c
@@ -0,0 +1,7 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
diff --git a/configs/comtrend_wap5813n_ram_defconfig b/configs/comtrend_wap5813n_ram_defconfig
new file mode 100644
index 0000000000..5d5c584370
--- /dev/null
+++ b/configs/comtrend_wap5813n_ram_defconfig
@@ -0,0 +1,45 @@
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0x80010000
+CONFIG_ARCH_BMIPS=y
+CONFIG_SOC_BMIPS_BCM6368=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="comtrend,wap-5813n"
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="WAP-5813n # "
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+# CONFIG_CMD_MISC is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_DM_GPIO=y
+CONFIG_BCM6345_GPIO=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_CFI_FLASH=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_BCM6345=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DM_SERIAL=y
+CONFIG_BCM6345_SERIAL=y
diff --git a/include/configs/comtrend_wap5813n.h b/include/configs/comtrend_wap5813n.h
new file mode 100644
index 0000000000..2eafb816c9
--- /dev/null
+++ b/include/configs/comtrend_wap5813n.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <configs/bmips_common.h>
+#include <configs/bmips_bcm6368.h>
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
--
2.11.0
next prev parent reply other threads:[~2018-01-20 10:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-20 10:53 [U-Boot] [PATCH 0/3] mips: bmips: add BCM6368 SoC support Álvaro Fernández Rojas
2018-01-20 10:53 ` [U-Boot] [PATCH 1/3] dm: cpu: bmips: add BCM6368 support Álvaro Fernández Rojas
2018-01-20 10:53 ` [U-Boot] [PATCH 2/3] MIPS: add support for Broadcom MIPS BCM6368 SoC family Álvaro Fernández Rojas
2018-01-20 10:53 ` Álvaro Fernández Rojas [this message]
2018-01-20 13:16 ` [U-Boot] [PATCH v2 0/3] mips: bmips: add BCM6368 SoC support Álvaro Fernández Rojas
2018-01-20 13:16 ` [U-Boot] [PATCH v2 1/3] dm: cpu: bmips: add BCM6368 support Álvaro Fernández Rojas
2018-01-21 16:46 ` Daniel Schwierzeck
2018-01-20 13:16 ` [U-Boot] [PATCH v2 2/3] MIPS: add support for Broadcom MIPS BCM6368 SoC family Álvaro Fernández Rojas
2018-01-21 16:46 ` Daniel Schwierzeck
2018-01-20 13:16 ` [U-Boot] [PATCH v2 3/3] MIPS: add BMIPS Comtrend WAP-5813n board Álvaro Fernández Rojas
2018-01-21 16:46 ` Daniel Schwierzeck
2018-01-26 12:18 ` [U-Boot] [PATCH 0/3] mips: bmips: add BCM6368 SoC support Daniel Schwierzeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180120105359.17981-4-noltari@gmail.com \
--to=noltari@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.