Re: [PATCH v5 0/2] printk: Console owner and waiter logic cleanup

[Sergey Senozhatsky <sergey.senozhatsky@gmail.com>]

On (01/20/18 10:49), Steven Rostedt wrote:
[..]
> > printks from console_unlock()->call_console_drivers() are redirected
> > to printk_safe buffer. we need irq_work on that CPU to flush its
> > printk_safe buffer.
> 
> So is the issue that we keep triggering this irq work then? Then this
> solution does seem to be one that would work. Because after x amount of
> recursive printks (printk called by printk) it would just stop printing
> them, and end the irq work.
> 
> Perhaps what Tejun is seeing is:
> 
>  printk()
>    net_console()
>      printk() --> redirected to irq work
> 
>  <irq work>
>   printk
>     net_console()
>       printk() --> redirected to another irq work
> 
> and so on and so on.

it's a bit trickier than that, I think.

we have printk recursion from console drivers. it's redirected to
printk_safe and we queue an IRQ work to flush the buffer

 printk
  console_unlock
   call_console_drivers
    net_console
     printk
      printk_save -> irq_work queue

now console_unlock() enables local IRQs, we have the printk_safe
flush. but printk_safe flush does not call into the console_unlock(),
it uses printk_deferred() version of printk

IRQ work

 prink_safe_flush
  printk_deferred -> irq_work queue


so we schedule another IRQ work (deferred printk work), which eventually
tries to lock console_sem

IRQ work
 wake_up_klogd_work_func()
  if (console_trylock())
   console_unlock()

if it succeeds then it goes to console_unlock(), where console driver
can cause another printk recursion. but, once again, it will be
redirected to printk_safe buffer first. if it fails then we have either
the original CPU to print out those irq_work messages, which is sort
of bad, or another CPU which already acquired the console_sem and will
print out.

> This solution would need to be tweaked to add a timer to allow only so
> many nested printks in a given time. Otherwise it too would be an issue:
[..]
> > how are we going to distinguish between lockdep splats, for instance,
> > or WARNs from call_console_drivers() -> foo_write(), which are valuable,
> > and kmalloc() print outs, which might be less valuable? are we going to
> 
> The problem is that printk causing more printks is extremely dangerous,
> and ANY printk that is caused by a printk is of equal value, whether it
> is a console driver running out of memory or a lockdep splat. And
> the chances of having two hit at the same time is extremely low.

so.... fix the console drivers ;)




just kidding. ok...
the problem is that we flush printk_safe right when console_unlock() printing
loop enables local IRQs via printk_safe_exit_irqrestore() [given that IRQs
were enabled in the first place when the CPU went to console_unlock()].
this forces that CPU to loop in console_unlock() as long as we have
printk-s coming from call_console_drivers(). but we probably can postpone
printk_safe flush. basically, we can declare a new rule - we don't flush
printk_safe buffer as long as console_sem is locked. because this is how
that printing CPU stuck in the console_unlock() printing loop. printk_safe
buffer is very important when it comes to storing a non-repetitive stuff, like
a lockdep splat, which is a single shot event. but the more repetitive the
message is, like millions of similar kmalloc() dump_stack()-s over and over
again, the less value in it. we should have printk_safe buffer big enough for
important info, like a lockdep splat, but millions of similar kmalloc()
messages are pretty invaluable - one is already enough, we can drop the rest.
and we should not flush new messages while there is a CPU looping in
console_unlock(), because it already has messages to print, which were
log_store()-ed the normal way.

this is where the "postpone thing" jumps in. so how do we postpone printk_safe
flush.

we can't console_trylock()/console_unlock() in printk_safe flush code.
but there is a `console_locked' flag and is_console_locked() function which
tell us if the console_sem is locked. as long as we are in console_unlock()
printing loop that flag is set, even if we enabled local IRQs and printk_safe
flush work arrived. so now printk_safe flush does extra check and does
not flush printk_safe buffer content as long as someone is currently
printing or soon will start printing. but we need to take extra step and
to re-queue flush on CPUs that did postpone it [console_unlock() can
reschedule]. so now we flush only when printing CPU printed all pending
logbuf messages, hit the "console_seq == log_next_seq" and up()
console_sem. this sets a boundary -- no matter how many times during the
current printing loop we called console drivers and how many times those
drivers caused printk recursion, we will flush only SAFE_LOG_BUF_LEN chars.


IOW, what we have now, looks like this:

a) printk_safe is for important stuff, we don't guarantee that a flood
   of messages will be preserved.

b) we extend the previously existing "will flush messages later on from
   a safer context" and now we also consider console_unlock() printing loop
   as unsafe context. so the unsafe context it's not only the one that can
   deadlock, but also the one that can lockup CPU in a printing loop because
   of recursive printk messages.


so this

 printk
  console_unlock
  {
   for (;;) {
     call_console_drivers
      net_console
       printk
        printk_save -> irq_work queue

	   IRQ work
	     prink_safe_flush
	       printk_deferred -> log_store()
           iret
    }
    up();
  }


   // which can never break out, because we can always append new messages
   // from prink_safe_flush.

becomes this

printk
  console_unlock
  {
   for (;;) {
     call_console_drivers
      net_console
       printk
        printk_save -> irq_work queue

    }
    up();

  IRQ work
   prink_safe_flush
    printk_deferred -> log_store()
  iret
}



something completely untested, sketchy and ugly.

---

 kernel/printk/internal.h    |  2 ++
 kernel/printk/printk.c      |  1 +
 kernel/printk/printk_safe.c | 37 +++++++++++++++++++++++++++++++++++--
 3 files changed, 38 insertions(+), 2 deletions(-)

diff --git a/kernel/printk/internal.h b/kernel/printk/internal.h
index 2a7d04049af4..e85517818a49 100644
--- a/kernel/printk/internal.h
+++ b/kernel/printk/internal.h
@@ -30,6 +30,8 @@ __printf(1, 0) int vprintk_func(const char *fmt, va_list args);
 void __printk_safe_enter(void);
 void __printk_safe_exit(void);
 
+void printk_safe_requeue_flushing(void);
+
 #define printk_safe_enter_irqsave(flags)	\
 	do {					\
 		local_irq_save(flags);		\
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 9cb943c90d98..7aca23e8d7b2 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2428,6 +2428,7 @@ void console_unlock(void)
 	raw_spin_lock(&logbuf_lock);
 	retry = console_seq != log_next_seq;
 	raw_spin_unlock(&logbuf_lock);
+	printk_safe_requeue_flushing();
 	printk_safe_exit_irqrestore(flags);
 
 	if (retry && console_trylock())
diff --git a/kernel/printk/printk_safe.c b/kernel/printk/printk_safe.c
index 3e3c2004bb23..45d5b292d7e1 100644
--- a/kernel/printk/printk_safe.c
+++ b/kernel/printk/printk_safe.c
@@ -22,6 +22,7 @@
 #include <linux/cpumask.h>
 #include <linux/irq_work.h>
 #include <linux/printk.h>
+#include <linux/console.h>
 
 #include "internal.h"
 
@@ -51,6 +52,7 @@ struct printk_safe_seq_buf {
 	atomic_t		message_lost;
 	struct irq_work		work;	/* IRQ work that flushes the buffer */
 	unsigned char		buffer[SAFE_LOG_BUF_LEN];
+	bool			need_requeue;
 };
 
 static DEFINE_PER_CPU(struct printk_safe_seq_buf, safe_print_seq);
@@ -196,6 +198,7 @@ static void __printk_safe_flush(struct irq_work *work)
 	size_t len;
 	int i;
 
+	s->need_requeue = false;
 	/*
 	 * The lock has two functions. First, one reader has to flush all
 	 * available message to make the lockless synchronization with
@@ -243,6 +246,36 @@ static void __printk_safe_flush(struct irq_work *work)
 	raw_spin_unlock_irqrestore(&read_lock, flags);
 }
 
+/* NMI buffers are always flushed */
+static void flush_nmi_buffer(struct irq_work *work)
+{
+	__printk_safe_flush(work);
+}
+
+/* printk_safe buffers flushing, on the contrary, can be postponed */
+static void flush_printk_safe_buffer(struct irq_work *work)
+{
+	struct printk_safe_seq_buf *s =
+		container_of(work, struct printk_safe_seq_buf, work);
+
+	if (is_console_locked()) {
+		s->need_requeue = true;
+		return;
+	}
+
+	__printk_safe_flush(work);
+}
+
+void printk_safe_requeue_flushing(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(safe_print_seq, cpu).need_requeue)
+			queue_flush_work(&per_cpu(safe_print_seq, cpu));
+	}
+}
+
 /**
  * printk_safe_flush - flush all per-cpu nmi buffers.
  *
@@ -387,11 +420,11 @@ void __init printk_safe_init(void)
 		struct printk_safe_seq_buf *s;
 
 		s = &per_cpu(safe_print_seq, cpu);
-		init_irq_work(&s->work, __printk_safe_flush);
+		init_irq_work(&s->work, flush_printk_safe_buffer);
 
 #ifdef CONFIG_PRINTK_NMI
 		s = &per_cpu(nmi_print_seq, cpu);
-		init_irq_work(&s->work, __printk_safe_flush);
+		init_irq_work(&s->work, flush_nmi_buffer);
 #endif
 	}
 
---



> > lose all of them now? then we can do a much simpler thing - steal one
> > bit from `printk_context' and use if for a new PRINTK_NOOP_CONTEXT, which
> > will be set around call_console_drivers(). vprintk_func() would redirect
> > printks to vprintk_noop(fmt, args), which will do nothing.
> 
> Not sure what you mean here. Have some pseudo code to demonstrate with?

sure, I meant that if we want to disable printk recursion from
call_console_drivers(), then we can add another printk_safe section, say
printk_noop_begin()/printk_noop_end(), which would set a PRINTK_NOOP
bit of `printk_context', so when we have printk() under PRINTK_NOOP
then vprintk_func() goes to a special vprintk_noop(fmt, args), which
simply drops the message [does not store any in the per-cpu printk
safe buffer, so we don't flush it and don't add new messages to the
logbuf]. and we annotate call_console_drivers() as a pintk_noop
function. but that a no-brainer and I'd prefer to have another solution.

	-ss

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>