From: Ladislav Michl <ladis@linux-mips.org>
To: Keerthy <j-keerthy@ti.com>
Cc: daniel.lezcano@linaro.org, thierry.reding@gmail.com,
tony@atomide.com, aaro.koskinen@iki.fi,
Claudiu.Beznea@microchip.com, narmstrong@baylibre.com,
linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
sebastian.reichel@collabora.co.uk, linux-omap@vger.kernel.org,
robh+dt@kernel.org, t-kristo@ti.com, grygorii.strashko@ti.com
Subject: Re: [PATCH v8 8/9] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops
Date: Wed, 24 Jan 2018 08:24:32 +0100 [thread overview]
Message-ID: <20180124072432.GA11294@lenoch> (raw)
In-Reply-To: <1516772680-28256-1-git-send-email-j-keerthy@ti.com>
Keerthy,
On Wed, Jan 24, 2018 at 11:14:40AM +0530, Keerthy wrote:
> Adapt driver to utilize dmtimer pdata ops instead of pdata-quirks.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>
> Changes in v8:
>
> * Added of_node_put call in success case of probe.
>
> Boot tested on am437x-gp-evm and dra7xx-evm.
> Also compile tested omap1_defconfig with other patches of v7
> posted here:
>
> https://www.spinics.net/lists/linux-omap/msg141100.html
>
> With v8 version of Patch 8/9.
>
> drivers/pwm/pwm-omap-dmtimer.c | 68 ++++++++++++++++++++++++++----------------
> 1 file changed, 42 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
> index 5ad42f3..c00e474 100644
> --- a/drivers/pwm/pwm-omap-dmtimer.c
> +++ b/drivers/pwm/pwm-omap-dmtimer.c
> @@ -23,6 +23,7 @@
> #include <linux/mutex.h>
> #include <linux/of.h>
> #include <linux/of_platform.h>
> +#include <linux/platform_data/dmtimer-omap.h>
> #include <linux/platform_data/pwm_omap_dmtimer.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> @@ -37,7 +38,7 @@ struct pwm_omap_dmtimer_chip {
> struct pwm_chip chip;
> struct mutex mutex;
> pwm_omap_dmtimer *dm_timer;
> - struct pwm_omap_dmtimer_pdata *pdata;
> + struct omap_dm_timer_ops *pdata;
> struct platform_device *dm_timer_pdev;
> };
>
> @@ -242,19 +243,35 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> struct device_node *timer;
> + struct platform_device *timer_pdev;
> struct pwm_omap_dmtimer_chip *omap;
> - struct pwm_omap_dmtimer_pdata *pdata;
> + struct dmtimer_platform_data *timer_pdata;
> + struct omap_dm_timer_ops *pdata;
> pwm_omap_dmtimer *dm_timer;
> u32 v;
> - int status;
> + int status, ret = 0;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "Missing dmtimer platform data\n");
> - return -EINVAL;
> + timer = of_parse_phandle(np, "ti,timers", 0);
> + if (!timer)
> + return -ENODEV;
> +
> + timer_pdev = of_find_device_by_node(timer);
> + if (!timer_pdev) {
> + dev_err(&pdev->dev, "Unable to find Timer pdev\n");
> + ret = -ENODEV;
> + goto put;
> }
>
> - if (!pdata->request_by_node ||
> + timer_pdata = dev_get_platdata(&timer_pdev->dev);
> + if (!timer_pdata) {
> + dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
> + ret = -EINVAL;
> + goto put;
> + }
> +
> + pdata = timer_pdata->timer_ops;
> +
> + if (!pdata || !pdata->request_by_node ||
> !pdata->free ||
> !pdata->enable ||
> !pdata->disable ||
> @@ -267,37 +284,32 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> !pdata->set_prescaler ||
> !pdata->write_counter) {
> dev_err(&pdev->dev, "Incomplete dmtimer pdata structure\n");
> - return -EINVAL;
> + ret = -EINVAL;
> + goto put;
> }
>
> - timer = of_parse_phandle(np, "ti,timers", 0);
> - if (!timer)
> - return -ENODEV;
> -
> if (!of_get_property(timer, "ti,timer-pwm", NULL)) {
> dev_err(&pdev->dev, "Missing ti,timer-pwm capability\n");
> - return -ENODEV;
> + ret = -ENODEV;
> + goto put;
Should we call of_node_put() even from here? of_get_property() failed, so
reference was not updated.
> }
>
> dm_timer = pdata->request_by_node(timer);
And timer seems to be used only here, so calling
of_node_put(timer);
just here should be enough.
> - if (!dm_timer)
> - return -EPROBE_DEFER;
> + if (!dm_timer) {
> + ret = -EPROBE_DEFER;
> + goto put;
> + }
>
> omap = devm_kzalloc(&pdev->dev, sizeof(*omap), GFP_KERNEL);
> if (!omap) {
> pdata->free(dm_timer);
> - return -ENOMEM;
> + ret = -ENOMEM;
> + goto put;
> }
>
> omap->pdata = pdata;
> omap->dm_timer = dm_timer;
> -
> - omap->dm_timer_pdev = of_find_device_by_node(timer);
> - if (!omap->dm_timer_pdev) {
> - dev_err(&pdev->dev, "Unable to find timer pdev\n");
> - omap->pdata->free(dm_timer);
> - return -EINVAL;
> - }
> + omap->dm_timer_pdev = timer_pdev;
>
> /*
> * Ensure that the timer is stopped before we allow PWM core to call
> @@ -326,12 +338,16 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> if (status < 0) {
> dev_err(&pdev->dev, "failed to register PWM\n");
> omap->pdata->free(omap->dm_timer);
> - return status;
> + ret = status;
> + goto put;
> }
>
> platform_set_drvdata(pdev, omap);
>
> - return 0;
> +put:
> + of_node_put(timer);
> +
> + return ret;
> }
>
> static int pwm_omap_dmtimer_remove(struct platform_device *pdev)
> --
> 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: ladis@linux-mips.org (Ladislav Michl)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 8/9] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops
Date: Wed, 24 Jan 2018 08:24:32 +0100 [thread overview]
Message-ID: <20180124072432.GA11294@lenoch> (raw)
In-Reply-To: <1516772680-28256-1-git-send-email-j-keerthy@ti.com>
Keerthy,
On Wed, Jan 24, 2018 at 11:14:40AM +0530, Keerthy wrote:
> Adapt driver to utilize dmtimer pdata ops instead of pdata-quirks.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>
> Changes in v8:
>
> * Added of_node_put call in success case of probe.
>
> Boot tested on am437x-gp-evm and dra7xx-evm.
> Also compile tested omap1_defconfig with other patches of v7
> posted here:
>
> https://www.spinics.net/lists/linux-omap/msg141100.html
>
> With v8 version of Patch 8/9.
>
> drivers/pwm/pwm-omap-dmtimer.c | 68 ++++++++++++++++++++++++++----------------
> 1 file changed, 42 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
> index 5ad42f3..c00e474 100644
> --- a/drivers/pwm/pwm-omap-dmtimer.c
> +++ b/drivers/pwm/pwm-omap-dmtimer.c
> @@ -23,6 +23,7 @@
> #include <linux/mutex.h>
> #include <linux/of.h>
> #include <linux/of_platform.h>
> +#include <linux/platform_data/dmtimer-omap.h>
> #include <linux/platform_data/pwm_omap_dmtimer.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> @@ -37,7 +38,7 @@ struct pwm_omap_dmtimer_chip {
> struct pwm_chip chip;
> struct mutex mutex;
> pwm_omap_dmtimer *dm_timer;
> - struct pwm_omap_dmtimer_pdata *pdata;
> + struct omap_dm_timer_ops *pdata;
> struct platform_device *dm_timer_pdev;
> };
>
> @@ -242,19 +243,35 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> struct device_node *timer;
> + struct platform_device *timer_pdev;
> struct pwm_omap_dmtimer_chip *omap;
> - struct pwm_omap_dmtimer_pdata *pdata;
> + struct dmtimer_platform_data *timer_pdata;
> + struct omap_dm_timer_ops *pdata;
> pwm_omap_dmtimer *dm_timer;
> u32 v;
> - int status;
> + int status, ret = 0;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "Missing dmtimer platform data\n");
> - return -EINVAL;
> + timer = of_parse_phandle(np, "ti,timers", 0);
> + if (!timer)
> + return -ENODEV;
> +
> + timer_pdev = of_find_device_by_node(timer);
> + if (!timer_pdev) {
> + dev_err(&pdev->dev, "Unable to find Timer pdev\n");
> + ret = -ENODEV;
> + goto put;
> }
>
> - if (!pdata->request_by_node ||
> + timer_pdata = dev_get_platdata(&timer_pdev->dev);
> + if (!timer_pdata) {
> + dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
> + ret = -EINVAL;
> + goto put;
> + }
> +
> + pdata = timer_pdata->timer_ops;
> +
> + if (!pdata || !pdata->request_by_node ||
> !pdata->free ||
> !pdata->enable ||
> !pdata->disable ||
> @@ -267,37 +284,32 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> !pdata->set_prescaler ||
> !pdata->write_counter) {
> dev_err(&pdev->dev, "Incomplete dmtimer pdata structure\n");
> - return -EINVAL;
> + ret = -EINVAL;
> + goto put;
> }
>
> - timer = of_parse_phandle(np, "ti,timers", 0);
> - if (!timer)
> - return -ENODEV;
> -
> if (!of_get_property(timer, "ti,timer-pwm", NULL)) {
> dev_err(&pdev->dev, "Missing ti,timer-pwm capability\n");
> - return -ENODEV;
> + ret = -ENODEV;
> + goto put;
Should we call of_node_put() even from here? of_get_property() failed, so
reference was not updated.
> }
>
> dm_timer = pdata->request_by_node(timer);
And timer seems to be used only here, so calling
of_node_put(timer);
just here should be enough.
> - if (!dm_timer)
> - return -EPROBE_DEFER;
> + if (!dm_timer) {
> + ret = -EPROBE_DEFER;
> + goto put;
> + }
>
> omap = devm_kzalloc(&pdev->dev, sizeof(*omap), GFP_KERNEL);
> if (!omap) {
> pdata->free(dm_timer);
> - return -ENOMEM;
> + ret = -ENOMEM;
> + goto put;
> }
>
> omap->pdata = pdata;
> omap->dm_timer = dm_timer;
> -
> - omap->dm_timer_pdev = of_find_device_by_node(timer);
> - if (!omap->dm_timer_pdev) {
> - dev_err(&pdev->dev, "Unable to find timer pdev\n");
> - omap->pdata->free(dm_timer);
> - return -EINVAL;
> - }
> + omap->dm_timer_pdev = timer_pdev;
>
> /*
> * Ensure that the timer is stopped before we allow PWM core to call
> @@ -326,12 +338,16 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> if (status < 0) {
> dev_err(&pdev->dev, "failed to register PWM\n");
> omap->pdata->free(omap->dm_timer);
> - return status;
> + ret = status;
> + goto put;
> }
>
> platform_set_drvdata(pdev, omap);
>
> - return 0;
> +put:
> + of_node_put(timer);
> +
> + return ret;
> }
>
> static int pwm_omap_dmtimer_remove(struct platform_device *pdev)
> --
> 1.9.1
next prev parent reply other threads:[~2018-01-24 7:24 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-24 5:44 [PATCH v8 8/9] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops Keerthy
2018-01-24 5:44 ` Keerthy
2018-01-24 5:44 ` Keerthy
2018-01-24 7:24 ` Ladislav Michl [this message]
2018-01-24 7:24 ` Ladislav Michl
2018-01-24 8:28 ` Keerthy
2018-01-24 8:28 ` Keerthy
2018-01-24 8:28 ` Keerthy
2018-01-24 9:32 ` Ladislav Michl
2018-01-24 9:32 ` Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180124072432.GA11294@lenoch \
--to=ladis@linux-mips.org \
--cc=Claudiu.Beznea@microchip.com \
--cc=aaro.koskinen@iki.fi \
--cc=daniel.lezcano@linaro.org \
--cc=grygorii.strashko@ti.com \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.reichel@collabora.co.uk \
--cc=t-kristo@ti.com \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.