All of lore.kernel.org
 help / color / mirror / Atom feed
From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi][PATCH 1/5] arm64: allwinner: a64: Add the SPDIF block
Date: Wed, 24 Jan 2018 11:39:39 +0100	[thread overview]
Message-ID: <20180124103943.2062-2-codekipper@gmail.com> (raw)
In-Reply-To: <20180124103943.2062-1-codekipper@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

Add the SPDIF transceiver controller block to the A64 dtsi.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index d783d164b9c3..c82979038b0b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -382,6 +382,19 @@
 			};
 		};
 
+		spdif: spdif at 1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
 		uart0: serial at 1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-- 
2.16.0

WARNING: multiple messages have this Message-ID (diff)
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Marcus Cooper
	<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [linux-sunxi][PATCH 1/5] arm64: allwinner: a64: Add the SPDIF block
Date: Wed, 24 Jan 2018 11:39:39 +0100	[thread overview]
Message-ID: <20180124103943.2062-2-codekipper@gmail.com> (raw)
In-Reply-To: <20180124103943.2062-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Add the SPDIF transceiver controller block to the A64 dtsi.

Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index d783d164b9c3..c82979038b0b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -382,6 +382,19 @@
 			};
 		};
 
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-- 
2.16.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2018-01-24 10:39 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-24 10:39 [linux-sunxi][PATCH 0/5] Add tested digital audio blocks to A64 codekipper at gmail.com
2018-01-24 10:39 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-01-24 10:39 ` codekipper at gmail.com [this message]
2018-01-24 10:39   ` [linux-sunxi][PATCH 1/5] arm64: allwinner: a64: Add the SPDIF block codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-01-24 10:59   ` Maxime Ripard
2018-01-24 10:59     ` [PATCH " Maxime Ripard
2018-01-24 10:39 ` [linux-sunxi][PATCH 2/5] arm64: allwinner: a64: Add SPDIF TX pin to the A64 codekipper at gmail.com
2018-01-24 10:39   ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-01-24 11:00   ` [linux-sunxi][PATCH " Maxime Ripard
2018-01-24 11:00     ` Maxime Ripard
2018-01-24 11:02     ` Chen-Yu Tsai
2018-01-24 11:02       ` [PATCH " Chen-Yu Tsai
2018-01-24 11:40       ` [linux-sunxi][PATCH " Code Kipper
2018-01-24 11:40         ` [PATCH " Code Kipper
2018-01-24 10:39 ` [linux-sunxi][PATCH 3/5] arm64: allwinner: a64: Add SPDIF " codekipper at gmail.com
2018-01-24 10:39   ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-01-24 11:01   ` [linux-sunxi][PATCH " Maxime Ripard
2018-01-24 11:01     ` [PATCH " Maxime Ripard
2018-01-24 11:40     ` [linux-sunxi][PATCH " Code Kipper
2018-01-24 11:40       ` Code Kipper
2018-01-24 10:39 ` [linux-sunxi][PATCH 4/5] arm64: allwinner: a64: Add SPDIF to the Pine64 codekipper at gmail.com
2018-01-24 10:39   ` codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-01-24 12:10   ` Code Kipper
2018-01-24 12:10     ` Code Kipper
2018-01-24 10:39 ` [linux-sunxi][PATCH 5/5] arm64: allwinner: a64: Add DAI nodes codekipper at gmail.com
2018-01-24 10:39   ` codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-01-24 11:02   ` Maxime Ripard
2018-01-24 11:02     ` Maxime Ripard
2018-01-24 11:39     ` Code Kipper
2018-01-24 11:39       ` Code Kipper
2018-01-25  8:29       ` Maxime Ripard
2018-01-25  8:29         ` [PATCH " Maxime Ripard
2018-01-25  9:07         ` [linux-sunxi][PATCH " Code Kipper
2018-01-25  9:07           ` Code Kipper
2018-01-25 15:13           ` Maxime Ripard
2018-01-25 15:13             ` [PATCH " Maxime Ripard
2018-01-25  9:46         ` [linux-sunxi][PATCH " Code Kipper
2018-01-25  9:46           ` [PATCH " Code Kipper
2018-01-25 15:31           ` [linux-sunxi][PATCH " Maxime Ripard
2018-01-25 15:31             ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180124103943.2062-2-codekipper@gmail.com \
    --to=codekipper@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.