From: Philipp Rossak <embed3d@gmail.com>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@free-electrons.com, wens@csie.org,
linux@armlinux.org.uk, jic23@kernel.org, knaack.h@gmx.de,
lars@metafoo.de, pmeerw@pmeerw.net, davem@davemloft.net,
hans.verkuil@cisco.com, mchehab@kernel.org, rask@formelder.dk,
clabbe.montjoie@gmail.com, sean@mess.org, krzk@kernel.org,
quentin.schulz@free-electrons.com, icenowy@aosc.io,
edu.molinas@gmail.com, singhalsimran0@gmail.com
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v2 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg
Date: Mon, 29 Jan 2018 00:29:07 +0100 [thread overview]
Message-ID: <20180128232919.12639-5-embed3d@gmail.com> (raw)
In-Reply-To: <20180128232919.12639-1-embed3d@gmail.com>
For adding newer sensor some basic rework of the code is necessary.
This commit reworks the code and allows the sampling start/end code and
the position of value readout register to be altered. Later the start/end
functions will be used to configure the ths and start/stop the
sampling.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
drivers/iio/adc/sun4i-gpadc-iio.c | 44 ++++++++++++++++++++++++++++++++++-----
1 file changed, 39 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 03804ff9c006..db57d9fffe48 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -49,6 +49,15 @@ static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
}
+struct sun4i_gpadc_iio;
+
+/*
+ * Prototypes for these functions, which enable these functions to be
+ * referenced in gpadc_data structures.
+ */
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info);
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info);
+
struct gpadc_data {
int temp_offset;
int temp_scale;
@@ -56,6 +65,9 @@ struct gpadc_data {
unsigned int tp_adc_select;
unsigned int (*adc_chan_select)(unsigned int chan);
unsigned int adc_chan_mask;
+ unsigned int temp_data;
+ int (*sample_start)(struct sun4i_gpadc_iio *info);
+ int (*sample_end)(struct sun4i_gpadc_iio *info);
};
static const struct gpadc_data sun4i_gpadc_data = {
@@ -65,6 +77,9 @@ static const struct gpadc_data sun4i_gpadc_data = {
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun4i_gpadc_chan_select,
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun5i_gpadc_data = {
@@ -74,6 +89,9 @@ static const struct gpadc_data sun5i_gpadc_data = {
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun4i_gpadc_chan_select,
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun6i_gpadc_data = {
@@ -83,12 +101,18 @@ static const struct gpadc_data sun6i_gpadc_data = {
.tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun6i_gpadc_chan_select,
.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun8i_a33_gpadc_data = {
.temp_offset = -1662,
.temp_scale = 162,
.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
struct sun4i_gpadc_iio {
@@ -277,7 +301,7 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
if (info->no_irq) {
pm_runtime_get_sync(indio_dev->dev.parent);
- regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
+ regmap_read(info->regmap, info->data->temp_data, val);
pm_runtime_mark_last_busy(indio_dev->dev.parent);
pm_runtime_put_autosuspend(indio_dev->dev.parent);
@@ -382,10 +406,8 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int sun4i_gpadc_runtime_suspend(struct device *dev)
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info)
{
- struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
-
/* Disable the ADC on IP */
regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
/* Disable temperature sensor on IP */
@@ -394,10 +416,15 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
return 0;
}
-static int sun4i_gpadc_runtime_resume(struct device *dev)
+static int sun4i_gpadc_runtime_suspend(struct device *dev)
{
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+ return info->data->sample_end(info);
+}
+
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
+{
/* clkin = 6MHz */
regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
@@ -415,6 +442,13 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
return 0;
}
+static int sun4i_gpadc_runtime_resume(struct device *dev)
+{
+ struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+
+ return info->data->sample_start(info);
+}
+
static int sun4i_gpadc_get_temp(void *data, int *temp)
{
struct sun4i_gpadc_iio *info = data;
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg
Date: Mon, 29 Jan 2018 00:29:07 +0100 [thread overview]
Message-ID: <20180128232919.12639-5-embed3d@gmail.com> (raw)
In-Reply-To: <20180128232919.12639-1-embed3d@gmail.com>
For adding newer sensor some basic rework of the code is necessary.
This commit reworks the code and allows the sampling start/end code and
the position of value readout register to be altered. Later the start/end
functions will be used to configure the ths and start/stop the
sampling.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
drivers/iio/adc/sun4i-gpadc-iio.c | 44 ++++++++++++++++++++++++++++++++++-----
1 file changed, 39 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 03804ff9c006..db57d9fffe48 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -49,6 +49,15 @@ static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
}
+struct sun4i_gpadc_iio;
+
+/*
+ * Prototypes for these functions, which enable these functions to be
+ * referenced in gpadc_data structures.
+ */
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info);
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info);
+
struct gpadc_data {
int temp_offset;
int temp_scale;
@@ -56,6 +65,9 @@ struct gpadc_data {
unsigned int tp_adc_select;
unsigned int (*adc_chan_select)(unsigned int chan);
unsigned int adc_chan_mask;
+ unsigned int temp_data;
+ int (*sample_start)(struct sun4i_gpadc_iio *info);
+ int (*sample_end)(struct sun4i_gpadc_iio *info);
};
static const struct gpadc_data sun4i_gpadc_data = {
@@ -65,6 +77,9 @@ static const struct gpadc_data sun4i_gpadc_data = {
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun4i_gpadc_chan_select,
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun5i_gpadc_data = {
@@ -74,6 +89,9 @@ static const struct gpadc_data sun5i_gpadc_data = {
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun4i_gpadc_chan_select,
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun6i_gpadc_data = {
@@ -83,12 +101,18 @@ static const struct gpadc_data sun6i_gpadc_data = {
.tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun6i_gpadc_chan_select,
.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun8i_a33_gpadc_data = {
.temp_offset = -1662,
.temp_scale = 162,
.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
struct sun4i_gpadc_iio {
@@ -277,7 +301,7 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
if (info->no_irq) {
pm_runtime_get_sync(indio_dev->dev.parent);
- regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
+ regmap_read(info->regmap, info->data->temp_data, val);
pm_runtime_mark_last_busy(indio_dev->dev.parent);
pm_runtime_put_autosuspend(indio_dev->dev.parent);
@@ -382,10 +406,8 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int sun4i_gpadc_runtime_suspend(struct device *dev)
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info)
{
- struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
-
/* Disable the ADC on IP */
regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
/* Disable temperature sensor on IP */
@@ -394,10 +416,15 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
return 0;
}
-static int sun4i_gpadc_runtime_resume(struct device *dev)
+static int sun4i_gpadc_runtime_suspend(struct device *dev)
{
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+ return info->data->sample_end(info);
+}
+
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
+{
/* clkin = 6MHz */
regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
@@ -415,6 +442,13 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
return 0;
}
+static int sun4i_gpadc_runtime_resume(struct device *dev)
+{
+ struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+
+ return info->data->sample_start(info);
+}
+
static int sun4i_gpadc_get_temp(void *data, int *temp)
{
struct sun4i_gpadc_iio *info = data;
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
knaack.h-Mmb7MZpHnFY@public.gmane.org,
lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org,
davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org,
mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
rask-SivP7zSAdNDZaaYASwVUlg@public.gmane.org,
clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
sean-hENCXIMQXOg@public.gmane.org,
krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
icenowy-h8G6r0blFSE@public.gmane.org,
edu.molinas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
singhalsimran0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v2 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg
Date: Mon, 29 Jan 2018 00:29:07 +0100 [thread overview]
Message-ID: <20180128232919.12639-5-embed3d@gmail.com> (raw)
In-Reply-To: <20180128232919.12639-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
For adding newer sensor some basic rework of the code is necessary.
This commit reworks the code and allows the sampling start/end code and
the position of value readout register to be altered. Later the start/end
functions will be used to configure the ths and start/stop the
sampling.
Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/iio/adc/sun4i-gpadc-iio.c | 44 ++++++++++++++++++++++++++++++++++-----
1 file changed, 39 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 03804ff9c006..db57d9fffe48 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -49,6 +49,15 @@ static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
}
+struct sun4i_gpadc_iio;
+
+/*
+ * Prototypes for these functions, which enable these functions to be
+ * referenced in gpadc_data structures.
+ */
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info);
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info);
+
struct gpadc_data {
int temp_offset;
int temp_scale;
@@ -56,6 +65,9 @@ struct gpadc_data {
unsigned int tp_adc_select;
unsigned int (*adc_chan_select)(unsigned int chan);
unsigned int adc_chan_mask;
+ unsigned int temp_data;
+ int (*sample_start)(struct sun4i_gpadc_iio *info);
+ int (*sample_end)(struct sun4i_gpadc_iio *info);
};
static const struct gpadc_data sun4i_gpadc_data = {
@@ -65,6 +77,9 @@ static const struct gpadc_data sun4i_gpadc_data = {
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun4i_gpadc_chan_select,
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun5i_gpadc_data = {
@@ -74,6 +89,9 @@ static const struct gpadc_data sun5i_gpadc_data = {
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun4i_gpadc_chan_select,
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun6i_gpadc_data = {
@@ -83,12 +101,18 @@ static const struct gpadc_data sun6i_gpadc_data = {
.tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun6i_gpadc_chan_select,
.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun8i_a33_gpadc_data = {
.temp_offset = -1662,
.temp_scale = 162,
.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
struct sun4i_gpadc_iio {
@@ -277,7 +301,7 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
if (info->no_irq) {
pm_runtime_get_sync(indio_dev->dev.parent);
- regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
+ regmap_read(info->regmap, info->data->temp_data, val);
pm_runtime_mark_last_busy(indio_dev->dev.parent);
pm_runtime_put_autosuspend(indio_dev->dev.parent);
@@ -382,10 +406,8 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int sun4i_gpadc_runtime_suspend(struct device *dev)
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info)
{
- struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
-
/* Disable the ADC on IP */
regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
/* Disable temperature sensor on IP */
@@ -394,10 +416,15 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
return 0;
}
-static int sun4i_gpadc_runtime_resume(struct device *dev)
+static int sun4i_gpadc_runtime_suspend(struct device *dev)
{
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+ return info->data->sample_end(info);
+}
+
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
+{
/* clkin = 6MHz */
regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
@@ -415,6 +442,13 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
return 0;
}
+static int sun4i_gpadc_runtime_resume(struct device *dev)
+{
+ struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+
+ return info->data->sample_start(info);
+}
+
static int sun4i_gpadc_get_temp(void *data, int *temp)
{
struct sun4i_gpadc_iio *info = data;
--
2.11.0
next prev parent reply other threads:[~2018-01-28 23:29 UTC|newest]
Thread overview: 163+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-28 23:29 [PATCH v2 00/16] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 01/16] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:19 ` Maxime Ripard
2018-01-29 9:19 ` Maxime Ripard
2018-01-29 9:19 ` Maxime Ripard
2018-01-29 12:30 ` Philipp Rossak
2018-01-29 12:30 ` Philipp Rossak
2018-01-29 12:30 ` Philipp Rossak
2018-01-31 17:40 ` Quentin Schulz
2018-01-31 17:40 ` Quentin Schulz
2018-01-31 17:40 ` Quentin Schulz
2018-01-31 18:14 ` Philipp Rossak
2018-01-31 18:14 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 02/16] arm: config: sunxi_defconfig: enable SUN4I_GPADC Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:21 ` Maxime Ripard
2018-01-29 9:21 ` Maxime Ripard
2018-01-29 9:21 ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 03/16] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33 Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak [this message]
2018-01-28 23:29 ` [PATCH v2 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:27 ` Maxime Ripard
2018-01-29 9:27 ` Maxime Ripard
2018-01-29 9:27 ` Maxime Ripard
2018-01-31 17:51 ` Quentin Schulz
2018-01-31 17:51 ` Quentin Schulz
2018-01-31 17:51 ` Quentin Schulz
2018-01-31 18:35 ` Philipp Rossak
2018-01-31 18:35 ` Philipp Rossak
2018-01-31 18:35 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 05/16] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:31 ` Maxime Ripard
2018-01-29 9:31 ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 06/16] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:37 ` Maxime Ripard
2018-01-29 9:37 ` Maxime Ripard
2018-01-29 9:37 ` Maxime Ripard
2018-01-31 18:42 ` Quentin Schulz
2018-01-31 18:42 ` Quentin Schulz
2018-02-02 14:13 ` Philipp Rossak
2018-02-02 14:13 ` Philipp Rossak
2018-02-02 14:13 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 07/16] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:40 ` Maxime Ripard
2018-01-29 9:40 ` Maxime Ripard
2018-01-29 9:40 ` Maxime Ripard
2018-01-29 12:33 ` Philipp Rossak
2018-01-29 12:33 ` Philipp Rossak
2018-01-29 12:33 ` Philipp Rossak
2018-01-30 8:36 ` Maxime Ripard
2018-01-30 8:36 ` Maxime Ripard
2018-01-30 8:36 ` Maxime Ripard
2018-02-02 15:24 ` Philipp Rossak
2018-02-02 15:24 ` Philipp Rossak
2018-02-02 15:24 ` Philipp Rossak
2018-01-31 22:49 ` kbuild test robot
2018-01-31 22:49 ` kbuild test robot
2018-01-31 22:49 ` kbuild test robot
2018-01-28 23:29 ` [PATCH v2 08/16] iio: adc: sun4i-gpadc-iio: rework: add interrupt support Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-31 19:07 ` Quentin Schulz
2018-01-31 19:07 ` Quentin Schulz
2018-01-31 19:07 ` Quentin Schulz
2018-02-02 14:30 ` Philipp Rossak
2018-02-02 14:30 ` Philipp Rossak
2018-02-02 14:30 ` Philipp Rossak
2018-01-31 21:47 ` kbuild test robot
2018-01-31 21:47 ` kbuild test robot
2018-01-31 21:47 ` kbuild test robot
2018-01-28 23:29 ` [PATCH v2 09/16] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:46 ` Maxime Ripard
2018-01-29 9:46 ` Maxime Ripard
2018-01-29 9:46 ` Maxime Ripard
2018-01-31 19:23 ` Quentin Schulz
2018-01-31 19:23 ` Quentin Schulz
2018-01-31 19:23 ` Quentin Schulz
2018-02-02 14:42 ` Philipp Rossak
2018-02-02 14:42 ` Philipp Rossak
2018-02-02 14:42 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 10/16] iio: adc: sun4i-gpadc-iio: add support for A83T " Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:48 ` Maxime Ripard
2018-01-29 9:48 ` Maxime Ripard
2018-01-29 9:48 ` Maxime Ripard
2018-01-29 11:53 ` Philipp Rossak
2018-01-29 11:53 ` Philipp Rossak
2018-01-29 11:53 ` Philipp Rossak
2018-01-30 8:32 ` Maxime Ripard
2018-01-30 8:32 ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 11/16] arm: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5 Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:49 ` Maxime Ripard
2018-01-29 9:49 ` Maxime Ripard
2018-01-29 9:49 ` Maxime Ripard
2018-01-29 11:54 ` Philipp Rossak
2018-01-29 11:54 ` Philipp Rossak
2018-01-29 11:54 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 12/16] arm: dts: sun8i: h3: add support for the thermal sensor in H3 Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 13/16] arm: dts: sun8i: h3: add thermal zone to H3 Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:50 ` Maxime Ripard
2018-01-29 9:50 ` Maxime Ripard
2018-01-29 9:50 ` Maxime Ripard
2018-01-29 11:56 ` Philipp Rossak
2018-01-29 11:56 ` Philipp Rossak
2018-01-29 11:56 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-29 9:52 ` Maxime Ripard
2018-01-29 9:52 ` Maxime Ripard
2018-01-29 9:52 ` Maxime Ripard
2018-01-29 12:03 ` Philipp Rossak
2018-01-29 12:03 ` Philipp Rossak
2018-01-29 12:03 ` Philipp Rossak
2018-04-19 15:11 ` [linux-sunxi] " Kyle Evans
2018-04-19 15:11 ` Kyle Evans
2018-04-19 15:13 ` Icenowy Zheng
2018-04-19 15:13 ` Icenowy Zheng
2018-04-19 15:13 ` Icenowy Zheng
2018-04-19 15:19 ` Kyle Evans
2018-04-19 15:19 ` Kyle Evans
2018-04-19 15:19 ` Kyle Evans
2018-04-20 9:35 ` Philipp Rossak
2018-04-20 9:35 ` Philipp Rossak
2018-04-20 9:35 ` [linux-sunxi] " Philipp Rossak
2018-07-24 17:19 ` Paul Kocialkowski
2018-07-24 17:19 ` Paul Kocialkowski
2018-07-24 17:19 ` [linux-sunxi] " Paul Kocialkowski
2018-07-25 9:05 ` Emmanuel Vadot
2018-07-25 9:05 ` Emmanuel Vadot
2018-07-25 9:05 ` Emmanuel Vadot
2018-07-25 9:05 ` Emmanuel Vadot
2018-07-25 9:12 ` Paul Kocialkowski
2018-07-25 9:12 ` Paul Kocialkowski
2018-07-25 9:12 ` [linux-sunxi] " Paul Kocialkowski
2018-01-28 23:29 ` [PATCH v2 15/16] arm: dts: sun8i: a83t: add support for the thermal sensor in A83T Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180128232919.12639-5-embed3d@gmail.com \
--to=embed3d@gmail.com \
--cc=clabbe.montjoie@gmail.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edu.molinas@gmail.com \
--cc=hans.verkuil@cisco.com \
--cc=icenowy@aosc.io \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=krzk@kernel.org \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mchehab@kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=quentin.schulz@free-electrons.com \
--cc=rask@formelder.dk \
--cc=robh+dt@kernel.org \
--cc=sean@mess.org \
--cc=singhalsimran0@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.